SRAN593 – Replace Side Stand – 2022 Triumph Trident Motorcycles

“This site contains affiliate links for which OEMDTC may be compensated”

February 4, 2022 NHTSA CAMPAIGN NUMBER: 22V062000

Side Stand May Bend

An unstable motorcycle may fall over, increasing the risk of injury.

 

NHTSA Campaign Number: 22V062

Manufacturer Triumph Motorcycles America, Ltd.

Components STRUCTURE

Potential Number of Units Affected 314

 

Summary

Triumph Motorcycles America, Ltd. (Triumph) is recalling certain 2022 Trident motorcycles. The side stand may not support the weight of the motorcycle and bend, causing the motorcycle to become unstable while parked.

 

Remedy

Dealers will replace the side stand, free of charge. Owner notification letters were mailed March 2, 2022. Owners may contact Triumph customer service at 1-678-854-2010. Triumph’s number for this recall is SRAN 593.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check for Triumph Recalls

 


Background Information

Dealers are requested to replace the side stand as described in the procedure below.

 

Notice

STOP DELIVERY OF AFFECTED MOTORCYCLES IMMEDIATELY.

DO NOT deliver a motorcycle affected by this Safety Recall Action Notice to a customer until you have completed, or confirmed completion of, the procedures described in this Safety Recall Action Notice.

Delivering a motorcycle subject to an outstanding Safety Recall Action Notice may contravene local or national laws in your market, territory or country.

 

Triumph subsidiaries and distributors must instigate a Safety Recall Action in their country in accordance with the national recall code of practice. For vehicles in distributor or dealer stock the safety recall MUST be actioned before delivery to the customer.

 

Identification of Affected Motorcycles Trident models from VIN AF8681 to VIN AT4999.

Note:

 

Parts Ordering Instructions

For Triumph Subsidiary and Overseas Distributor dealers using Triumph Warranty On-Line with Parts Auto Ordering Flag switched on: Order all repair parts by submitting a New Prior through the Warranty OnLine system. Entering the above repair code in a New Prior will automatically add the parts required and labour times for this Safety Recall Action Notice.

For Overseas Distributor dealers NOT using Triumph Warranty On-Line or for Overseas Distributor dealers using Triumph Warranty On-Line with Parts Auto Ordering Flag switched off: Orders should be placed using the normal parts ordering procedure.

 

Genuine Parts Return

Dealer to retain parts for 90 days. All parts must be stored in a secure, non-public accessed area and correctly identified with a completed warranty label. Thereafter the parts must be rendered unusable prior to scrapping.

 

Other Instructions

Once completed, please mark the Service Record Book that the requirements of this bulletin have been complied with.

Before returning the motorcycle to the customer, download the latest calibration using the current version of the Triumph diagnostic software to the following:

  • Engine electronic control module
  • Chassis electronic control module (if fitted)
  • Keyless electronic control module (if fitted)
  • Suspension electronic control module (if fitted) • Connectivity module (if fitted)
  • Instruments (if applicable).

 

Replace Side Stand

Warning

Make sure the motorcycle is stabilised and adequately supported.

A correctly supported motorcycle will help prevent it from falling.

An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

 

Side Stand Removal

1. Place the motorcycle on a paddock stand and stabilise the motorcycle with suitable tie down straps.

 

Warning

Wear hand, eye and face protection when unhooking the stand spring. Take great care to minimise the risk of personal injury and loss of components.

 

Note:

  • The side stand is held in the up position by spring tension.

2. With the side stand in the up position, unhook the spring from the side stand and remove it from the motorcycle.

3. Remove and discard the circlip securing the pivot pin.

4. Remove the pivot pin and remove the side stand.

 

Side Stand Installation

1. Collect the new side stand from the kit and lightly coat the upper and lower contact surfaces of the side stand with Castrol High Temperature Grease.

2. Lightly coat the shank of the pivot pin with Castrol High Temperature Grease.

 

Warning

Wear hand, eye and face protection when fitting the stand spring. Take great care to minimise the risk of personal injury and loss of components.

 

5. With the side stand in the up position, hook the spring onto the upper plate then carefully hook it on to the side stand lug.

 

6. Check the operation of the side stand before riding the motorcycle. Make sure the spring holds the stand securely in the retracted position.

 


WHAT IS THE PROBLEM?

The side stand leg may bend over time and use, causing an affected motorcycle to lean beyond its designed angle of lean when parked. This increased side stand lean angle will be noticeable to the rider.

 

WHAT WILL TRIUMPH DO?

To address this condition, Triumph is launching a new recall as described in the above Safety Recall Action Notice 593. All arrangements for updating of our computer systems have been completed.

Notification letters to current customers will be mailed on or shortly after 23rd February explaining the action and advising them to return their bike to a Triumph dealer to have the modification carried out free of charge. Customers will be advised to adhere to national Covid-19 general movement and social distancing rules.

The bulletin instructs that affected VINS will require the side stand leg to be replaced.

 

WHAT SHOULD YOU DO?

All affected motorcycles are to be repaired in accordance with the above Safety Recall Action Notice.

It is imperative that any owner who has purchased an affected machine be contacted by you immediately and asked to return the machine for modification.

 

Triumph Dealers should take the following actions:

  1. Quarantine all unsold motorcycle stock (including motorcycle stock for sale on your website and with 3rd parties) and make arrangements to repair as per the above Safety Recall Action Notice prior to any further deliveries to customers.
  1. Quarantine all unsold new stocks of side stand leg (Triumph part number: T2086607). Do not sell to customers. Notify Triumph for destruction & credit information.

 

  1. Owners of machines outside of the a ected VIN range are not connected with this action and may therefore require reassurance.
  1. This action is likely to increase visitor tra c to your showroom and service areas. Please ensure all arrangements are made to best accommodate them.

U.S. LAW PROHIBITS THE DELIVERY OF A RECALLED MOTORCYCLE UNDER A SALE OR LEASE UNTIL THE REMEDY HAS BEEN PERFORMED.

We apologize for the inconvenience this may cause, but we are taking this action in the interest of our customers’ personal safety and satisfaction with our products. We thank you in advance for your anticipated cooperation.

If you have any additional questions, please contact Triumph Customer Support at (888) 2846288.

 


Chronology :

Mar21: Warranty Dept. identifies the symptom in service and commences initial information gathering.

Apr21: Quality Dept. commence investigation. Warranty to continue to monitor in-service performance of part.

Jan22: Warranty department identifies: 4 x Warranty claims; 1 x Field Report; No Deaths or Injuries.

Quality Dept. discussion with Claims Management Dept. on in-service campaign options. Triumph arrive at safety defect determination decision.

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
TRIUMPH TRIDENT 2022

 


12 Associated Documents

Defect Notice 573 Report

RCLRPT-22V062-5714.PDF 212.777KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.79 KB]

 


Recall Acknowledgement

RCAK-22V062-5262.pdf 645.96KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.82 KB]

 


Remedy Instructions and TSB

RCRIT-22V062-7357.pdf 99.482KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [97.15 KB]

 


Manufacturer Notices(to Dealers,etc) – TOL NOTICE (US&CA) – February 21, 2022 TOL Ref. # 20846-SVC Subject: Service/Technical

RCMN-22V062-3106.pdf 159.425KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [155.69 KB]

 


Owner Notification Letter(Part 577)

RCONL-22V062-0923.pdf 102.527KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [100.12 KB]

 


Recall 573 Report – 02/14/2022

RCLRPT-22V062-3218.PDF 213.507KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.50 KB]

 


Recall Quarterly Report #1, 2022-1

RCLQRT-22V062-3823.PDF 211.135KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #2, 2022-2

RCLQRT-22V062-3913.PDF 211.23KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


ISSUED Renotification Notice – Outstanding Safety Recall Email

RCRN-22V062-1696.pdf 353.548KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [345.26 KB]

 


Manufacturer Notices(to Dealers,etc) – Email

RCMN-22V062-6110.pdf 179.844KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [175.63 KB]

 


Recall Quarterly Report #3, 2022-3

RCLQRT-22V062-8247.PDF 211.315KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.36 KB]

 


Recall Quarterly Report #4, 2022-4

RCLQRT-22V062-1461.PDF 211.425KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.47 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V062&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
CICMOD CNC Adjustable Kickstand Side Stand Black Kick Stand for CBR 600 1000 RR 600RR 1000RR
  • 100% Brand new and high quality
  • Material: Billet Aluminum,CNC Machined
  • Color: black,come as the picture shown.
  • Easy to install,installation instructions not included.
  • Fitment: 2003-2014 CBR 600RR 2004-2007 CBR 1000RR
Bestseller No. 2
Eapele Triangle Stand for Dirt Bike, T-shaped Central Support for Greater Bearing Capacity, Solid Steel Structure with Black Powder Coated Protection
  • Hold well---Made from steel with a black powder coated finish for maximum durability. Strong Welded tip fits in the axle of virtually any bike from 80cc bikes to 500cc bikes. Black powder coated steel for durability.
  • Extra sturdy design --- The uniquely designed internal T-shaped support structure increases the load-bearing capacity of the triangle to prevent bending and deformation.
  • Cost-efficient way to rest your dirt bike---Quick and easy side stand hooks into your rear axle. Able to use rear axles which inner diameters are greater than 11mm.But to make sure, measure the size of the hole in your bike's rear axle first.
  • Eapele dirt bike stand is really handy when you’re out riding and need a quick stand to hold the bike up while you’re grabbing a drink. Help angle the bike perfectly into a nice parking stance.
  • Manufacturer Warranty---Eapele fence post anchor brackets covered in an 18months warranty. If you have any concerns, just contact us on Amazon. We will always be there.
SaleBestseller No. 3
Motorcycle Kickstand, Metal Alloy Motorcycle Side Stand for Most Motorcycles
  • Versatile Compatibility: Our heavy-duty motorcycle kickstand is the perfect replacement for most motorcycles, including popular models like monkey Z50 Bike. Whether you have a dirtbike, motocycle, or any other type of motorcycle, our kickstand is designed to fit them all
  • Enhanced Stability: Our kickstand features an enlarged bottom plate, which disperses pressure when parked, effectively safeguarding the floor from scratches. Additionally, the increased foot support on soil ground prevents the vehicle from collapsing or falling
  • Unmatched Durability: Crafted from a premium metal alloy, our motorcycle side stand offers exceptional toughness and hardness. With a black paint coating, it is resistant to oxidation and rust, ensuring long-lasting durability even in harsh weather conditions
  • Effortless Installation: Our motorcycle kickstand has been professionally engineered and processed for seamless installation. It comes with matching screws and springs, making the installation process quick and hassle-free
  • The Perfect Upgrade: If you're looking for an ideal replacement or refurbishment for your motorcycle, look no further. Our meticulously manufactured motorcycle side stand provides stability and durability, ensuring a reliable and safe parking experience
SaleBestseller No. 4
vevor Motorcycle Stand Lift, 850lbs Front Rear Combo Stand Lift Stand, Front Wheel Fork Stand, Rear U+L Fork Swingarm Spool Stand, Compatible with Most Yamaha Honda Kawasaki Suzuki Motorcycles, Black
  • Large Load Capacity: With a powerful 850 lb (0.39 Ton) load capacity, our motorcycle stand is designed for a tire radius within 13.8 inches, making it compatible with most motorcycles, including popular brands like Yamaha, Kawasaki, Honda, and Suzuki.
  • Sturdy Construction: Crafted from heavy-duty steel, our motorcycle forklift stand features precise bracket joint slot positioning and reinforced limit clips, ensuring stable and shake-free lifting. The supportive triangular force points minimize deformation during long-term motorcycle support.
  • Adjustable Universal Fork Heads: The front stand with double forks head boasts an extensive adjustment range of 6.5-9.5 in (165-240 mm), the rear stand with U-shaped fork head support adjustable from 8.9-13.8 in (225-350 mm). And we provide a pair of L-shaped fork head, it can be adjusted from 9.1-13 in (230-330 mm). These versatile options provide stable support for both sides of your vehicle.
  • Easy Assembly & Use: Our motorcycle frame stand comes with a detailed assembly guide and a quick assembly process. Featuring four 3-inch PP casters and extended handles, you'll be able to lift your motorcycle effortlessly in just 2–3 seconds.
  • Convenient Maintenance & Storage: Combined front and rear motorcycle paddock stand allow you to lift your motorcycle entirely off the ground, making at-home repairs, oil changes, and cleaning a breeze. Long-term holding won't compress the tires or cause flat spots and air leaks. Upgrade your motorcycle maintenance experience with our versatile stand!
Bestseller No. 5
Xitomer 0-3'' for DR650 Motorcycle Adjustable Kickstand Side stand Fit for 1996-2020 2021 2022 2023 DR650 Adjustable Side Stand
  • Fitment: Fit for DR650 1996-2023
  • Material: Q235 Iron, Powder Coating Surface Finish, Much Stronger then Alloy One
  • Lowered Size: It can go from Stock to Height to Approximately 3" Lower. It is absolutely a Must-Have if you Lowered Your Bike
  • Placement on Vehicle: Left
  • Kickstand Design: Kickstand has Larger Plates at the End to Avoid Sinking into the Soft Sand or Ground when You Parking.
Bestseller No. 6
Larlansz Universal 14" KICKSTAND Motorcycle Clamp On Side Kick Stand Dirtbike HEAVY DUTY FOR CR125 CR250 CR500 KX125 KX250 KX500
  • IMPORTANT : Measures level about 14" from bottom of swingarm mount bracket to ground.
  • This is a HEAVY DUTY unit, well suited for OFF ROAD bikes.Heavy Duty Spring keeps stand in place when riding.
  • Clamp measures approx 2-1/2" tall by 1-3/16 deep
  • No drilling required.Attaches firmly and easily to the swingarm.
  • Perfectly for CR125 CR250 CR500 KX125 KX250 KX500 which Measure level about 14" from bottom of swingarm mount bracket to ground.
SaleBestseller No. 7
VBESTLIFE Motorcycle Kickstand,Motorcycle Foot Side Stand Stainless Steel Nonslip Parking Foot Support Triangular Stable Structure(20CM)
  • ANTI-SLIP: Antislip design of the motorcycle kickstand can effectively prevent sliding and is stable and reliable in use.With thickening and hardening treatment, triangular stable structure, ensuring stable parking.
  • DURABLE AND STURDY: Made of premium stainless steel material, rustproof, sturdy, durable, and has long service life,not easy to rust, wear, high strength, resistance, durable.
  • EASY INSTALLATION: Motorcycle foot side bracket is equipped with mounting screw for easy installation and can be used to replace old or damaged ones.
  • SUIT FOR: Motorcycle tripod holder, fine workmanship, exquisite style, suitable for motorcycles, and a wide range of uses.
  • EXQUISITE APPEARANCE:Exquisite appearance, full of uniqueness and personality, suitable for motorcycle modification.
Bestseller No. 8
Motorcycle Wheel Lift Stand Trail Stand Front and Rear Easy and Portable for Most Motorcycle Wheels
  • ★Provide a telescopic belt to help you tighten the brakes to prevent the wheels from slipping
  • ★High-quality aluminum and iron structure, black surface spray treatment, protect the lift stand, will lift all sports bikes
  • ★Easy to carry (retractable, shrink length 22cm), you can put it in your bag and take it out anytime, anywhere
  • ★You can check the video to get more videos about the product
  • ★This Motorcycle Wheel Lift Stand is small and easy to carry to Solve the problems of traditional lifting stands that are bulky and difficult to carry.★ As long as a Small Foldable Pole can support the front or rear wheels of a motorcycle, helping you repair the motorcycle
Bestseller No. 9
Excel PST-004 Triangle Motorcycle Stand, Silver
  • Welded tip will fit in the axle of virtually any bike from 80cc minis to 500cc ground pounders
  • Constructed from heavy-duty steel, then zinc coated to prevent rust and corrosion
  • Space saving, quick and easy motorcycle stand
  • The most cost efficient Universal motorcycle stand on the market
  • Stand Dimensions: Pin Diameter: 0.432" (10.97mm); Pin Length: 1.75" (44.5mm); Triangle Height: 13" (330mm)
Bestseller No. 10
Motoforti Universal Adjustable Motorcycle Kickstand Side Support Stand Set CNC Aluminum Alloy Black
  • Anti Slip Design: The bottom of the motorcycle stand is threaded for non slip standing, enhances the friction with the ground and grip, keeps your motorbike at the right angle to ensure a good standing position.
  • Adjustable Motorcycle Side Stand: The adjustable bracket allows you to shorten the kickstand when lowering your vehicle without having to worry about replacing stock support. Load-bearing weight up to 300KG.
  • Universal Fit: This motorcycle stand is suitable for most motorcycles, wide application range. This kickstand makes your motorcycle convenient when parking. Not fit for Yamaha Zuma 50fx scooters.
  • Easy to Install: Equipped with mounting screws for easy installation and can be used to replace old or broken ones. Top hole size: 0.9cm/0.35"; 1.3cm/0.51". Note: The vertical distance between the bottom of motorcycles and the ground should not be less than 18.5cm (7.3inch), and make sure that the kickstand screws of your original motorcycle fits the hole.
  • Durable Material: CNC aluminum alloy motorcycle side bracket is not easy to rust, wear. It is corrosion resistance, and durable.

Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...