Spindle Nuts Improperly Tightened – 2021 Inland Empire (IE) Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

January 24, 2022 NHTSA CAMPAIGN NUMBER: 22V028000

Spindle Nuts Improperly Tightened

Improperly tightened spindle nuts may cause excessive axle vibration and overheat the bearings, affecting vehicle control, and increasing the risk of a crash.

 

NHTSA Campaign Number: 22V028

Manufacturer Inland Empire Trailers

Components SUSPENSION

Potential Number of Units Affected 50

 

Summary

Inland Empire Trailers (Inland Empire) is recalling all 2021 Inland Empire (IE) trailers. The spindle nuts on the axles may have been improperly tightened during assembly.

 

Remedy

Inland Empire will inspect the spindle nuts and bearings, tighten the spindle nuts and replace the bearings as necessary, free of charge. Owner notification letters are expected to be mailed Feb. 21, 2022. Owners may contact Inland Empire at 1-909-999-5422.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

Aug-2-2021 – IE Trailers received a letter informing us of an important safety recall (Safety Recall #21E-067)

Aug-2-21-IE trailers segregated All terran axles from production axles and created a report of customers that potentially could have received the the axle from the date we received the axles from Terran axles Jul-14-21 and the date all axles were repaired Sep-8-21

Sep-8-21-All terran axles repaired in inventory and returned to production

No reports of failures reported till date.

 


21E067 Terran Axle Trailer Axles Spindle Nuts Improperly Tightened

 

21E067 Terran Axle Trailer Axles Spindle Nuts Improperly Tightened

 


9 Affected Products

Vehicles

MAKE MODEL YEAR
INLAND EMPIRE TRAILERS CAR HAULER TRAILER 2021
INLAND EMPIRE TRAILERS CUSTOM TRAILER 2021
INLAND EMPIRE TRAILERS DUMP TRAILER 2021
INLAND EMPIRE TRAILERS ENCLOSED TRAILER 2021
INLAND EMPIRE TRAILERS FLAT DECK TRAILER 2021
INLAND EMPIRE TRAILERS RZR TRAILER 2021
INLAND EMPIRE TRAILERS UTILITY TRAILER 2021
INLAND EMPIRE TRAILERS UTILITY/ DUMP TRAILER 2021
INLAND EMPIRE TRAILERS VENDING TRAILER 2021

 


5 Associated Documents

Defect Notice 573 Report

RCLRPT-22V028-4370.PDF 212.288KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.31 KB]

 


Recall Acknowledgement

RCAK-22V028-5696.pdf 646.669KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [631.51 KB]

 


Recall 573 Report – 2/3/2022

RCLRPT-22V028-5689.PDF 212.489KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.51 KB]

 


Recall 573 Report – 2/10/2022

RCLRPT-22V028-8584.PDF 216.346KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [211.28 KB]

 


Recall 573 Report – 2/15/2022

RCLRPT-22V028-9183.PDF 217.203KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [212.11 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V028&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
SaleBestseller No. 1
CE Smith - Trailer Nut Washers & Cotter Pins Spindle - Sturdy Marine Hardware - 1"
  • Two 1 inch shaft spindle nuts
  • Two 1 inch shaft washers
  • Two 1-3/4 inch long cotter pins
  • Sold in pairs
Bestseller No. 2
Trailer Hub Spindle Nut Washer Kit
Bestseller No. 3
Camotokiit New Trailer Wheel Spindle Nut Retainer For 2 to 8K Dexter 6-190 6-191, 4 nuts & 4 retainers
  • Use for: Axle Nut
  • Manufacturer Part Number: 6-191 & 6-190
  • Trailer Wheel Axle Nuts and Retainers.
  • Package Included: 4 nuts & 4 retainers
  • Fits Most axles from 2K To 8K. 8K After Aug. 2003
Bestseller No. 4
FUYEAR Trailer Nut Kit 1" Washers & 2.2"Long Cotter Pins Compatible with 1"Shaft Spindle
  • New trailer nut kits sold in pairs.
  • Kits include:Two 2.2 inch long cotter pins,Two Inner diameter 1 inch Trailer nuts, Two Inner diameter 1 inch washers.
  • Trailer Nut kits With 1" Washers & Cotter Pins Compatible With 1" Spindle.
  • After testing, it can fully cooperate with the original equipment, and it is convenient to replace and install.
  • The nut thread is precise, clearly visible, firm, corrosion-resistant, non-rusting, and lasts longer.
Bestseller No. 5
GREPSPUD 2Sets 1'' Trailer Axle Nut Kits 1'' Thread Spindle Castle Nuts Set with 1" I.D. Washers & 2.3'' Long Cotter Pins, Trailer Nut Kit for 1'' Shaft Spindle
  • 【COMPATIBILITY】- Fits 1'' Trailer Axles, EZ-Lube Axle. We also provide Long Cotter Pins. Convenient for your repair and replacement.
  • 【GREAT VALUE PACK】- These 2Sets trailer nut kits include 6Pcs parts: 2Pcs Spindle Castle Nuts (for 1'' thread) + 2Pcs Washers (1'' I.D.) + 2Pcs Cotter Pins (Long: 2.3''). Value-for-money sets! Meet the need for multiple repairs and spare parts.
  • 【LONG SERVICE LIFE】- Trailer axle nuts made of high-quality steel, the thread is precise, firm & durable. Color zinc plating treatment, corrosion-resistant, rust-resistant, longer service life.
  • 【GALVANIZED WASHERS】- Steel washers ensure good sealing performance, prevent the trailer spindle from shaking, durable enough for long time service, hardly broken.
  • 【SATISFACTION GUARANTEE】- For whatever reason, if you are not satisfied, you can contact us for replacement or full refund. Please rest assured purchase.
Bestseller No. 6
Trailer Nut Set w/ 1" Washers & Cotter Pins fits for 1" Spindle high Strength
  • Trailer Nut Set
  • 1" Washers & 2"Cotter Pins
  • Material: strengthen material,longer life.
  • Factory sells in direct, the quality is assured
Bestseller No. 7
Trailer Nut Kit with 1" Washers & 2.25" Cotter Pins Shaft Spindle Nuts SEASAIL
  • ✔️Characteristic: Contains 2*Trailer nuts (Inner diameter: 1 inch; Outer diameter: 1.45 inch), 2* cotter pins(Length2.25 inch)and 2* Washers(Inner diameter: 1 inch)
  • ✔️ Compatibility: Please note that the product is fit for 1" axle and not for a 1" threaded section
  • ✔️Longer life: It is made of new high-quality materials with reliable quality and longer service life
  • ✔️Excellent After-Sale Service: If you have any issues with the product, please contact us for troubleshooting help, replacement,or refund. Our aim is to make you satisfy the product and the service we provide.
Bestseller No. 8
iBroPrat 2Set Trailer Nut Kits 1" Spindle Shaft Can-am Castle Nuts 1" Washers 2.25" Cotter Pins for 1" Shaft Spindle
  • 【FIT】Fits 1 inch shaft spindle trailer axle.
  • 【SIZE & QUANTITY 】2PCS I.D: 1 inch Ar Castle Nut, 2PCS L: 2.4 inch Cotter Pin, 2PCS I.D: 1 inch Washer.
  • 【STURDY AND DURABLE】All boat trailer parts are made of high quality materials and fine processing.Have a long service life.
  • 【ANTI-RUST AND ANTI-CORROSION】Surface of body zinc plated.Oil-proof, waterproof and anti-corrosion.
  • 【SATISFACTION GUARANTEE】For whatever reason, if you are not satisfied, you can request a replacement or a full refund. Please do not hesitate to contact us if you have any questions. We will show you our sincere attitude and satisfactory solution. Please rest assured purchase.
Bestseller No. 9
Trailer Nut Kit Combination for 1 "Shaft Spindle,Trailer Spindle Washer, Including 1" Washer and 2.2 "Long Cotter pin High Strength Trailer Nut Kit
  • 1 castle nut for trailer axle, Nut Set W/ Washers , Cotter Pins Fit For Many Trailer with 1" Axle Shaft
  • The external thread is precision machined and tightly connected to the thread, making it precise, clearly visible, firm, corrosion-resistant, non rusting, and has a longer service life. Can be quickly installed.
  • Using high-quality steel, the manufacturer coated the product with lubricating oil, which is wear-resistant and rust-proof. It can operate in a short time and has a longer service life.
  • 100% brand new, tested by the manufacturer, fully compatible with the original equipment, easy to replace and install, very helpful to you.
  • If you receive any defects or quality issues with the product, please contact us through the Amazon platform, and we will send you a replacement or a full refund.
SaleBestseller No. 10
6-190 Trailer Spindle Nut Retainer Compatible With Jam Nut 2-8K Dexter Axle
  • [COMPATIBLE WITH]:Trailer Spindle Nut Retainer fits for Jam Nut 2K 8K Dexter Axle
  • [PRODUCT DESCRIPTION]:This is the new style nut and retainer that Dexter is using on all the new axles.With this Trailer Wheel Spindle Nut Retainer you do not need the cotter pin and the retainers clip over top of the nut after you have the nut set, it is a lot better and lasts longer then the cotter pin.
  • [PACKAGING INCLUDES]:4Pcs Trailer Spindle Nut Retainer,Excluding nuts
  • [HIGH-QUALITY]:Made from high-quality materials for ultimate durability. Manufactured to meet or exceed strict quality requirements.
  • [NOTE]:Please confirm that the parts are the correct ones you need before purchasing. If you are not sure, please contact us for verification.

Last update on 2024-03-17 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...