February 2, 2022 NHTSA CAMPAIGN NUMBER: 22V055000
Awning May Detach from Motorhome
An awning that detaches while the vehicle is in motion can increase the risk of a crash or injury.
NHTSA Campaign Number: 22V055
Manufacturer Tiffin Motorhomes, Inc.
Components STRUCTURE, EQUIPMENT
Summary
Tiffin Motorhomes, Inc. (Tiffin) is recalling certain 2020-2022 Allegro Red motorhomes. The patio awning may have been improperly installed, allowing it to detach.
Remedy
Dealers will inspect and secure the awning, free of charge. Owner notification letters were mailed March 18, 2022. Owners may contact Tiffin customer service at 1-256-356-0261. Tiffin’s number for this recall is TIF-121.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
RECALL INSPECTION AND REPAIR INSTRUCTIONS
NHTSA Recall #: 22V-055
TC #: 2022-059
Tiffin #: TIF-121
Models Involved: 2020, 2021 & 2022 Allegro RED 360, 37PA floorplan with sidewall mounted patio awnings
Purpose: To secure the patio awning to the sidewall of the motorhome.
Tools Needed:
2 8’ Step Ladders
25’ Tape Measure
Drill
3/8” Hex Nut runner bit
13/64” Drill Bit
4mm Allen Wrench
Parts Needed:
5131352 Patio Awning Bracket repair kit, 1 per bracket needing repair
EternaBond Tape (shop supply)
INSPECTION PROCEDURE:
- Verify the brand of patio awning that is installed on the motorhome. If a Dometic brand of awning is installed, that unit is not involved in the recall. Please file the warranty claim using the inspection only code above for the inspection of units not involved for 6 minutes with Tiffin Motorhomes so that recall can be cleared from the motorhome.
- If the unit is not a Dometic Brand of patio awning, locate the patio awning switch in overhead cabinet above driver’s seat. Push & release “Out” button, allow awning to extend approximately 3’, press “Stop” button.
- Place ladders at each end of awning in close proximity to the shoulder of each arm at the sidewall. Have two individuals climb the ladders. Each person should then begin to apply upward pressure to the awning lead rail while watching the connection of the silver awning plates to the fiberglass sidewall. Note: There will be up to ¼” of movement in the awning plate. If any separation between plate and fiberglass allows you to see the fasteners through the wall, the plate is improperly installed.
- Relocate one ladder to the center arm and apply upward pressure on the awning lead rail to inspect the connection of the center connection plates. Note: There will be up to ¼” of movement in the awning plate. If any separation between plate and fiberglass allows you to see the fasteners through the wall, the plate is improperly installed.
CORRECTION PROCEDURE:
!! CAUTION!! PATIO AWNING WEIGHS APPROXIMATELY 100 lbs.!! CAUTION !!
- Open refrigerator access door and disconnect the 9-position matrix connector for the patio awning wires.
- Using the 4mm Allen Wrench, loosen the two setscrews on bottom of each of the four awning brackets as pictured below.
- Have a person at each end of the patio awning. Begin rotating the bottom of the awning away from the body of the coach and lift the entire awning off the mounting plates. Set the awning down on the top platform of each ladder. Carefully pull the remainder of awning wiring through the hole.
- Carefully move the awning off top of the ladders and place on the ground being careful not to damage the awning.
- Hook the tape measure to the forward edge of the slide trim and confirm placement of each of the four awning mounting plates per drawing. These measurements are to the center of each bracket. (See print included on page 4)
- If additional brackets are necessary to meet specifications, each additional bracket will need to be prepped by applying EternaBond tape to back side of each bracket. Ensure the sealant tape covers each of the four holes through the bracket.
- Maintaining a straight line across the top of all brackets, attach the new awning bracket(s) at the appropriate dimension(s) using four of the 5/16” X 1 ½” hex head screws.
- With the awning back on top of the ladders, feed the 9-position wire connector through the fiberglass hole.
- Lift the awning over the awning brackets, allowing the top edge to make contact first. Once it sets down over the brackets, the bottom of the awning will then rotate against the bottom of the awning brackets.
- Using the 4mm Allen Wrench, tighten the two setscrews on the bottom of each of the four awning brackets.
Chronology :
12/17/2021 Tiffin was contacted about an awning bracket detaching on one end of the patio awning on of a 2022 37 PA Allegro Red.
12/20/2021 Tiffin started investigation.
1/25/2022 Determined scope to include only the Allegro Red 37 PA floorplan due to the installation process and location of backers.
1/25/2022 Issue and findings of investigation were brought before Safety Committee members where all members voted to recall the 2020 – 2022 Allegro Red 37 PA motorhomes with sidewall mounted patio awnings.
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
TIFFIN | ALLEGRO RED | 2020-2022 |
11 Associated Documents
Defect Notice 573 Report
RCLRPT-22V055-7194.PDF 213.551KB
RCLRPT-22V055-7194
Recall Acknowledgement
RCAK-22V055-7708.pdf 726.323KB
Recall 573 Report – 2/8/2022
RCLRPT-22V055-1501.PDF 213.567KB
RCLRPT-22V055-1501
Recall 573 Report – 2/15/2022
RCLRPT-22V055-9917.PDF 213.57KB
RCLRPT-22V055-9917
Remedy Instructions and TSB
RCRIT-22V055-9785.pdf 475.976KB
RCRIT-22V055-9785
ISSUED Owner Notification Letter(Part 577)
RCONL-22V055-5251.pdf 226.84KB
RCONL-22V055-5251
Recall Quarterly Report #1, 2022-1
RCLQRT-22V055-7375.PDF 211.128KB
RCLQRT-22V055-7375
Recall Quarterly Report #2, 2022-2
RCLQRT-22V055-3028.PDF 211.215KB
RCLQRT-22V055-3028
Recall Quarterly Report #1, 2022-1
RCLQRT-22V055-1199.PDF 211.215KB
RCLQRT-22V055-1199
Recall Quarterly Report #3, 2022-3
RCLQRT-22V055-6423.PDF 211.296KB
RCLQRT-22V055-6423
Recall Quarterly Report #4, 2022-4
RCLQRT-22V055-6673.PDF 211.408KB
RCLQRT-22V055-6673
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V055&docType=RCL
- FABRIC FOR RV AWNINGS: Replace your old, worn-out RV awning fabric! ShadePro's premium vinyl fabric will renew your canopy. The attractive fade print offers a seamless styling, while the heavyweight, weatherproof material provides reliable outdoor coverage from the sun, rain, and cold wherever you roam. Set includes awning fabric and install instructions.
- DURABLE VINYL CANOPY: Built for the great outdoors! ShadePro's 13 Oz, 3 ply premium-grade vinyl fabric resists UV and water and is cold-crack tested to -20°F. This ultra-durable, weatherproof material is reinforced with webbing at the stress points to prevent tattering and tearing in the elements.
- MADE FOR YOUR AWNING: Designed to fit most RV awnings without metal covers! ShadePro's universal fabric replacement will perfectly fit your RV's existing awning, such as Carefree, Dometic, Lippert, Carter, and Faulkner. Carefully measure the distance from the centerline of one awning arm to the centerline of the other to ensure the correct fabric size for your RV, camper, or motorhome.
- SIMPLE TO INSTALL: Easy, breezy setup! No need for special tools. ShadePro's premium vinyl fabric for RV awnings features two sewn-in polyrods and straightforward step-by-step instructions to ensure the easiest do-it-yourself awning fabric installation experiences.
- SHADEPRO: Helping RV enthusiasts optimize their rigs and travel adventures for over 35 years! ShadePro carries only the highest quality recreational vehicle sun screens and shade control accessories professionally crafted and built to last for long-term enjoyment you can count on.
- Replace your old and worn-out awning with SunWave brand awning fabric! Our fabric combines Style, Durability, Price, Warranty and Service. Premium Quality RV Awning Fabric fits Carefree, Dometic (A&E), Lippert and Carter awnings.
- We've selected the best quality vinyl for our awnings. Vinyl is the ideal material option for awnings fabric since it is strong and long-lasting. Our Awning canopy is made of durable 15 oz vinyl (tensile strength 140 PSI) . Weather-Guard is made of heavy duty 16 oz vinyl. Canopy and Weather-Guard are bonded together by HF heat welding. This construction has the fabric lasting much longer than one piece.
- Our vinyl material is resistant to UV radiation and color won't fade away anytime soon. SunWave awning is color coated on both sides and it will look as good as new for years. The awning valance has a straight edge. The design gives the fabric a pretty and clean look. Our vinyl is flame retardant and will not crack below frozen point. Fabric can be cleaned by regular soap and clean water.
- To make the installation smooth and easy, an Installation Tool and a new Pull Strap are included in the package.
- 3-year warranty and 30-day risk-free return policy.
- 18ft Awning Replacement: Our gray fade RV awning replacement fabric size is 17.2 ft x 8 ft/524 x 240 cm. And it is a necessary supplement for your RV accessories and works with most RV awnings in the market.
- Premium Vinyl Awnings: This RV replacement awning is made of 15 oz vinyl, with heat insulation and waterproof characteristics; keep the interior of your RV in a cool environment. And it is solid and durable enough to accompany your RV for a long time. Andinyl material is easier to clean, so you don't have to worry so much about tree sap and dirt settling in to stay.
- Block UV & Rain: As a premium awning replacement, it can provide you and your family with a cool place in the hot weather. Vinyl awnings can also effectively block ultraviolet rays and protect your skin and eyes. Similarly, it can also keep you dry on rainy days.
- One Person Job: We provide a set of practical accessories: 1 x Pull Strap, 1 x Pressing Plate. By instructions and the replacement pull strap, it is easy to do it yourself to change your old worn-out, torn, peeling awning fabric. All polyrods are sewn in, making the installation of this RV awning fabric replacement easier.
- Expand Your Activity Space: This RV awning fabric can provide you with extra outdoor space and improve your overall living space. You can breathe fresh air and lovely breeze freely in the hot outdoors, not just inside the RV Wait. In addition, it is very convenient to use.
- FABRIC FOR RV AWNINGS: Replace your old, worn-out RV awning fabric! ShadePro's heavy duty vinyl fabric will renew your canopy. The attractive dual-sided striped print offers a seamless styling, while the heavyweight, weatherproof material provides reliable outdoor coverage from the sun, rain, and cold wherever you roam. Set includes awning fabric and install instructions.
- DURABLE VINYL CANOPY: Built for the great outdoors! ShadePro's 15 Oz, 3 ply heavy duty vinyl fabric resists UV and water and is cold-crack tested to -20°F. This ultra-durable, weatherproof material is reinforced with webbing at the stress points to prevent tattering and tearing in the elements.
- MADE FOR YOUR AWNING: Designed to fit most RV awnings without metal covers! ShadePro's universal fabric replacement will perfectly fit your RV's existing awning, such as Carefree, Dometic, Lippert, Carter, and Faulkner. Carefully measure the distance from the centerline of one awning arm to the centerline of the other to ensure the correct fabric size for your RV, camper, or motorhome.
- SIMPLE TO INSTALL: Easy, breezy setup! No need for special tools. ShadePro's heavy duty vinyl fabric for RV awnings features two sewn-in polyrods and straightforward step-by-step instructions to ensure the easiest do-it-yourself awning fabric installation experiences.
- SHADEPRO: Helping RV enthusiasts optimize their rigs and travel adventures for over 35 years! ShadePro carries only the highest quality recreational vehicle sun screens and shade control accessories professionally crafted and built to last for long-term enjoyment you can count on.
- Custom Looking Graphical - No Faded AMERICAN FLAG awning fabric replacement for your RV, offer you happier & distinctive camping but not only regular sun block and waterproof. Other custom graphical available to check with us
- Innovated RV Awning Replacement Fabric Material - 15oz super heavy vinyl coated high strength twist polyester make the fabric much more strong for tearing resistant; special treatment on camper trailer awning fabric to provide -28℉ COLD CRACK resistant; anti-UV, frame resistant, to match American Standard (ASTM). Leaveshade offers 5 YEARS weathering
- Well Workmanship and Easier Installation - Awning fabric edging cover by mesh screen fabric sewn makes the awning fabric looks premium made; 3 poly-cord (double ends) sewn in the awning fabric make you install it much easier than regular replacement fabric. Replacement pull straps included
- HOW TO ORDER - Actual finished Fabric Measurement of 15'3'' is fit for 16 FT RV Awning (CAREFULL on MEASURING: the RV Awning using Center of Arm to Center of Arm measurement), and universal fits the most of awning brands such as Carefree, Dometic (A&E), Lippert, Carter, Faulkner, Fiamma, Solera, etc. Fit for RV awning Sizes: 7', 8', 9', 10', 11', 12', 13', 14', 15', 16', 17', 18', 19', 20', 21', 22', 23', and customized size available, we are manufacture!
- NEW TECHNOLOGY - Leaveshade improved many points for rv awning fabric, to provide a new and different and amazing visual sense experience when Rving
- Installed on the vehicle rooftop rail to provide 54 sq.ft shade, easily cover area to shield from sun, rain, and wind
- Made of 420D oxford fabric with 2000mm PU coating, UV50+ protection and water resistance; Stable aluminum alloy structure, rust resistant and standing in calm conditions
- Telescoping poles with twist-lock design, quickly extend and collapse, provide quick and simple setup and tear-down; Adjustable Height: 59" to 85" (150cm to 216cm)
- Installation hardware, made of high-quality 304 stainless steel, is INCLUDED
- Can be retracted, saving space; Waterproof carry bag for easy transport and storage
- Enjoy the outdoors in any season with Awnlux's Retractable RV Awning, designed to fit perfectly with your camper or RV. This retractable awning is made with utility in mind and can be opened and closed quickly without the use of electricity; simply pull the strap to extend and retract your awning as needed.
- RV AWNING FABRIC — Our RV awning fabric is made of high-quality 16oz vinyl material, which is waterproof and thermally insulated, and improve the durability of this sun shade fabric.
- RV AWNING DIMENSIONS — 12 x 8 Feet.Actual Fabric Dimensions: 11 Feet 2 Inches x 8 Feet.Both fabric roller and fabric lock rail are spliced and installed, which is more stable to use.
- MULTIPLE SIZING & COLOR OPTIONS — Fitting RV ranging from 10' to 20' and available in 8 color fabrics,Manual Modular Retractable RV Awnings are designed to help meet the needs of your RV’s size and your personal style preferences.
- EASY TO INSTALL — Our assembly contains all the parts needed for installation. There is a detailed installation video on the website, if you have any questions, you can communicate with us in time.
- RV AWNING DIMENSIONS — 15 x 8 Feet.Actual Fabric Dimensions: 14 Feet 2 Inches x 8 Feet.Both fabric roller and fabric lock rail are spliced and installed, which is more stable to use.
- HIGH QUALITY - Our premium vinyl awnings are made with a 16oz vinyl. Built to last, these fabrics stand up to the light, weather and cleaners better than any other fabric.our thread is already in use with our popular Premium 16oz Vinyl Fabrics and is a key reason why we are able to offer a warranty on the Premium VInyl fabric construction. We are excited to offer this premium enhancement to our replacement fabrics.
- KEEP COOL & BLOCK UV -This 16oz vinyl fabric for RV is used as the front awning of the RV. It can provide shaded place for you and your family in hot weather to keep you cool. The best RV awning provides plenty of shade to keep you protected in all weather conditions. You can park in spots you like and enjoy the outdoors.You’ll be protected from UV as you relax outside your RV.
- EASY TO INSTALL:Our suncode rv awning frame assembly gives you everything you need to upgrade your rv, whih included awning fabric.Our rv awning assembly comes with all the hardware you need for installation, so you do not need to run to the store to get screws and brackets.
- WIDE RANGE OF COLORS&SIZES:comes with huge selection of colors and configurations designed to fit perfectly with your camper,trailer or RV.Our awning frame assembly is available in a total of fourteen different sized ,making it easy to find the right size for your RV.
- 🚗【RV Awning Fabric】Replace worn-out RV awning fabric! Richeer's High-Quality PVC fabric will bring new vitality to your awning. The charming blue gradient print provides a seamless shape, and the thick weatherproof material provides reliable outdoor coverage, which can withstand the Sunlight and UV no matter where you walk
- 🚗【Durable Oxford Cloth】Specially made for outdoor sports! Three layers of fabric resist UV and rain.This super durable fabric improves the service life of the awning, better prevents tearing and cracking under strong sunlight, provides shade for you and your family, and can effectively block harmful ultraviolet rays, protect your skin and eyes
- 🚗【Awning For You】Suitable for most RV awnings without metal cover! Richeer's replacement parts will perfectly fit the existing awning of your RV. We carefully measure the distance from the center-line of one awning arm to the center-line of the other to ensure the correct fabric size for your RV, camper or RV
- 🚗【Simple Installation】All installations do not require special tools, and installation is convenient and simple. Two sewn polyethylene rods and simple step-by-step instructions are used to ensure the simplest installation experience of self-help awning fabric
- 🚗【Product Warranty】Help enthusiasts optimize their equipment, provide high-quality accessories, professionally made, durable, and worthy of long-term enjoyment. This product enjoy a one-year warranty from the date of purchase. If you have any questions or are not satisfied with the product, please contact us. We will provide professional answers and services

- RV AWNING FABRIC REPLACEMENT: Use Dulepax's high quality vinyl fabric with resistant design.By replacing the RV awning by yourself,You get a premium fabric and it's much cheaper than going to the RV shop to replace it.You will be happy with the awning fabric replacement.
- LONG LASTING VINYL MATERIAL: Our Camper Awning Replacement uses a heavy duty 14Oz- 3 ply high quality fabric. It is UV protection and waterproof.The fabric receibes a Special treatment to provide crack resistance down -30 degrees.It is suitable for all weather conditions in the United States.
- INSTALLING AWNING FABRIC:Dulepax's RV Awning Fabric is sewn with three polycords.One polycord slide into the RV body canopy rolltube slot.The another two polycords slide into the extended canopy slot.The three polycords are designed to loosen the fabric completely close,with no folds in the middle.All installations require no special tools and are easy to install.
- RENEW YOUR CANOPY:The shipment includes the rv awning fabric replacement, one heavy duty replacement pull strap.It fits most trailer Awning Brands in US market,Such as Dometic (A&E), Carefree, Fiamma, Solera, etc.
- HOW TO ORDER - Actual finished Fabric Measurement of 13.2 FT is fit for 14 FT RV Awning (BE CAREFULL on MEASURING: Measure the RV Awning using Center of Arm to Center of Arm), RV awning Sizes available:10', 11', 12', 13', 14', 15', 16', 17', 18', 19', 20', 21', and customized size available, we are manufacturer!
Last update on 2023-05-08 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
SEOCONTENT-START
Page 1 of 4 RECALL INSPECTION AND REPAIR INSTRUCTIONS NHTSA Recall #: 22V-055 TC #: 2022-059 Tiffin #: TIF-121 Models Involved: 2020, 2021 & 2022 Allegro RED 360, 37PA floorplan with sidewall mounted patio awnings Purpose: To secure the patio awning to the sidewall of the motorhome. Tools Needed: 2 8’ Step Ladders 25’ Tape Measure Drill 3/8” Hex Nut runner bit 13/64” Drill Bit 4mm Allen Wrench Parts Needed: 5131352 Patio Awning Bracket repair kit, 1 per bracket needing repair EternaBond Tape (shop supply) FLAT RATE CODES AND TIMES When filing the warranty claim for payment please use the following flat rate codes and times. For inspection of units not involved, RD9856RC01, for 0.10 hrs. (6 minutes) For inspection of units that do not need repair, RD9856RC01, for 0.50 hrs. (30 minutes) For replacing a bracket, RD9857RC01, we are allowing an additional 0.50 hrs. (30 minutes per bracket to repair) INSPECTION PROCEDURE: 1. Verify the brand of patio awning that is installed on the motorhome. If a Dometic brand of awning is installed, that unit is not involved in the recall. Please file the warranty claim using the inspection only code above for the inspection of units not involved for 6 minutes with Tiffin Motorhomes so that recall can be cleared from the motorhome. 2. If the unit is not a Dometic Brand of patio awning, locate the patio awning switch in overhead cabinet above driver’s seat. Push & release “Out” button, allow awning to extend approximately 3’, press “Stop” button. 3. Place ladders at each end of awning in close proximity to the shoulder of each arm at the sidewall. Have two individuals climb the ladders. Each person should then begin to apply upward pressure to the awning lead rail while watching the connection of the silver awning plates to the fiberglass sidewall. Note: There will be up to ¼” of movement in the awning plate. If any separation between plate and fiberglass allows you to see the fasteners through the wall, the plate is improperly installed. Page 2 of 4 4. Relocate one ladder to the center arm and apply upward pressure on the awning lead rail to inspect the connection of the center connection plates. Note: There will be up to ¼” of movement in the awning plate. If any separation between plate and fiberglass allows you to see the fasteners through the wall, the plate is improperly installed. 5. Close the awning using the switch in cabinet over driver’s seat. CORRECTION PROCEDURE: !! CAUTION!! PATIO AWNING WEIGHS APPROXIMATELY 100 lbs.!! CAUTION !! 1. Open refrigerator access door and disconnect the 9-position matrix connector for the patio awning wires. 2. Using the 4mm Allen Wrench, loosen the two setscrews on bottom of each of the four awning brackets as pictured below. 3. Have a person at each end of the patio awning. Begin rotating the bottom of the awning away from the body of the coach and lift the entire awning off the mounting plates. Set the awning down on the top platform of each ladder. Carefully pull the remainder of awning wiring through the hole. Page 3 of 4 4. Carefully move the awning off top of the ladders and place on the ground being careful not to damage the awning. 5. Hook the tape measure to the forward edge of the slide trim and confirm placement of each of the four awning mounting plates per drawing. These measurements are to the center of each bracket. (See print included on page 4) 6. If additional brackets are necessary to meet specifications, each additional bracket will need to be prepped by applying EternaBond tape to back side of each bracket. Ensure the sealant tape covers each of the four holes through the bracket. 7. Maintaining a straight line across the top of all brackets, attach the new awning bracket(s) at the appropriate dimension(s) using four of the 5/16” X 1 ½” hex head screws. 8. With the awning back on top of the ladders, feed the 9-position wire connector through the fiberglass hole. 9. Lift the awning over the awning brackets, allowing the top edge to make contact first. Once it sets down over the brackets, the bottom of the awning will then rotate against the bottom of the awning brackets. 10. Using the 4mm Allen Wrench, tighten the two setscrews on the bottom of each of the four awning brackets. 11. Reconnect the 9-position matrix connector for the patio awning wires. Page 4 of 4
**************************************************************************************************************
Page 1 of 2 IMPORTANT SAFETY RECALL This notice applies to your vehicle, identified by the VIN below NHTSA Recall # 22V-055 TC Recall # 2022-059 Tiffin Recall # TIF-121 March 9, 2022 Sidewall Mounted Patio Awning, 2020 – 2022 Allegro RED 360 37PA floorplan only Dear Tiffin Motorhome Owner or Dealer, For US Owners: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. For Canadian Owners: This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Tiffin Motorhomes has decided that a defect, which relates to motor vehicle safety, exists on the following models of motorhomes: 2020, 2021 & 2022 Allegro RED 360 37PA built between May 2, 2019 and January 4, 2022 that are equipped with a certain brand of sidewall mounted patio awnings. Tiffin Motorhomes has become aware of the possibility that certain sidewall mounted patio awnings may not be securely fastened to the motorhome. If the awning is not securely attached, there is the possibility that it may detach from the sidewall of the motorhome and this could lead to an accident or a personal injury. Tiffin Motorhomes will have the awnings inspected to verify that they are correctly installed and then correct the installation if needed. Please arrange to take your motorhome to a reputable service center OR dealer of your choice to have the inspection completed. The recall inspection will take approximately 30 minutes and will be completed at no charge to you, the owner. If the awnings are not securely attached to the motorhome and repair is needed, please allow up to one hour for the repair. 105 2nd Street NW Red Bay, Alabama 35582 Page 2 of 2 On some 2020 models of 37PA Allegro RED’s, the patio awning that is installed is a Dometic Brand awning that has a different method of attachment. If your motorhome is equipped with a Dometic Brand awning, there is no work to be done. Please contact Tiffin Motorhomes by phone at 256-356-8661 extension 2176 or by email at recalls@tiffinmotorhomes.com with your name and VIN so that we can clear the recall from your motorhome. If you are using a service center that is not a Tiffin Motorhomes authorized repair facility, please make sure that they contact Tiffin Motorhomes for the required instructions and time allowed for the repair. Tiffin Motorhomes will not pay over the allowed time unless the repair facility receives a prior authorization. For authorization, contact Tiffin Motorhomes at 256-356-0261 or service@tiffinmotorhomes.com You may be liable for any progressive damage that results from your failure to complete the recall within a reasonable time after receiving notification. If owners have paid to have this repair completed, please send a copy of the invoice that was paid by the owner to Tiffin Motorhomes at the following address: Tiffin Motorhomes, attn: Recalls, 105 2nd Street NW, Red Bay AL 35582 or by email to service@tiffinmotorhomes.com Please make sure the invoice notes who paid for the repair, the VIN of the motorhome and the date the repair was completed. If you do not own the vehicle that corresponds to the vehicle identification number which appears on this Recall Notification, please return the notification to the Tiffin Warranty Department with any information you can furnish that will assist us in locating the present owner. You may also call us at 256-356-8661 ext. 2176 or send an email to recalls@tiffinmotorhomes.com. If you are unable to have the defect remedied without charge and within a reasonable time after you tender the vehicle for repair, please contact the Tiffin Warranty Department, at 1-256-356-8661, 8:00 a.m. to 3:30 p.m., Central Time. For US Customers: You may also wish to notify the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington DC 20590, or phone 1-888-327-4236 (TTY: 1-800-424-9153): or go to http://www.safercar.gov. For Canadian Customers: If after contacting your dealer and/or manufacturer customer service you have additional questions with regards to this recall, you may contact Transport Canada-Road Safety, 80 rue Noël, Gatineau, Quebec J8Z 0A1, or call 1-800-333-0510. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. We regret any inconvenience this action may cause, but feel certain you understand our interest in motor vehicle safety. Tiffin Recall Department
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-055 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Tiffin Motorhomes, Inc. Submission Date : FEB 15, 2022 NHTSA Recall No. : 22V-055 Manufacturer Recall No. : TIF-121 Manufacturer Information : Manufacturer Name : Tiffin Motorhomes, Inc. Address : 105 2nd Street NW PO Box 596 Red Bay AL 35582 Company phone : 999 Population : Number of potentially involved : 247 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2022 Tiffin Allegro Red Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 2020 Allegro Red – 123 2021 Allegro Red – 100 2022 Allegro Red – 24 Production Dates : MAY 02, 2019 – JAN 04, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Awning can become detached from sidewall of coach. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Awning could detach, which in turn could cause injury. Description of the Cause : Installers were not setting the awning in the correct location, so the screws were not hitting/penetrating the metal backer. Identification of Any Warning that can Occur : Visually inspecting the awning during pre-trip inspection or during maintenance inspection could show separation from sidewall and/or looseness. Involved Components : Part 573 Safety Recall Report 22V-055 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Awning Component Description : Covering attached to sidewall of coach that can be unfurled to provide shade or rain protection. Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 12/17/2021 Tiffin was contacted about an awning bracket detaching on one end of the patio awning on of a 2022 37 PA Allegro Red. 12/20/2021 Tiffin started investigation. 1/25/2022 Determined scope to include only the Allegro Red 37 PA floorplan due to the installation process and location of backers. 1/25/2022 Issue and findings of investigation were brought before Safety Committee members where all members voted to recall the 2020 – 2022 Allegro Red 37 PA motorhomes with sidewall mounted patio awnings. Description of Remedy : Description of Remedy Program : We are currently waiting for work instructions. However, each unit involved will be inspected to see if the awning loose, and if so it will be repaired at no charge to the customer. Details of the reimbursement plan will be included in the owner’s notification letter. How Remedy Component Differs from Recalled Component : The remedied component will now be audited during production to make sure installation of awning is in correct location and the screws are hitting/penetrating the metal backer. There will also be a second audit at the end of production. Identify How/When Recall Condition was Corrected in Production : The first audit during production was put into place 1-10-2022. Part 573 Safety Recall Report 22V-055 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Tiffin Motorhomes records to determine the names and addresses of involved. Repairs will be made at no charge to the customer. Planned Dealer Notification Date : APR 01, 2022 – APR 01, 2022 Planned Owner Notification Date : APR 01, 2022 – APR 01, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-055 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Tiffin Motorhomes, Inc. Submission Date : FEB 02, 2022 NHTSA Recall No. : 22V-055 Manufacturer Recall No. : TIF-121 Manufacturer Information : Manufacturer Name : Tiffin Motorhomes, Inc. Address : 105 2nd Street NW PO Box 596 Red Bay AL 35582 Company phone : 999 Population : Number of potentially involved : NR Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2022 Tiffin Allegro Red Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : Allegro Red 2020-2022 37 PA Production Dates : JAN 01, 2020 – DEC 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Awning can become detached from sidewall of coach. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Awning could detach, which in turn could cause injury. Description of the Cause : Installers were not setting the awning in the correct location, so the screws were not hitting/penetrating the metal backer. Identification of Any Warning that can Occur : Visually inspecting the awning during pre-trip inspection or during maintenance inspection could show separation from sidewall and/or looseness. Involved Components : Part 573 Safety Recall Report 22V-055 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Awning Component Description : Covering attached to sidewall of coach that can be unfurled to provide shade or rain protection. Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 12/17/2021 Tiffin was contacted about an awning bracket detaching on one end of the patio awning on of a 2022 37 PA Allegro Red. 12/20/2021 Tiffin started investigation. 1/25/2022 Determined scope to include only the Allegro Red 37 PA floorplan due to the installation process and location of backers. 1/25/2022 Issue and findings of investigation were brought before Safety Committee members where all members voted to recall the 2020 – 2022 Allegro Red 37 PA motorhomes with sidewall mounted patio awnings. Description of Remedy : Description of Remedy Program : We are currently waiting for work instructions. However, each unit involved will be inspected to see if the awning loose, and if so it will be repaired at no charge to the customer. Details of the reimbursement plan will be included in the owner’s notification letter. How Remedy Component Differs from Recalled Component : The remedied component will now be audited during production to make sure installation of awning is in correct location and the screws are hitting/penetrating the metal backer. There will also be a second audit at the end of production. Identify How/When Recall Condition was Corrected in Production : The first audit during production was put into place 1-10-2022. Part 573 Safety Recall Report 22V-055 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Tiffin Motorhomes records to determine the names and addresses of involved. Repairs will be made at no charge to the customer. Planned Dealer Notification Date : APR 01, 2022 – APR 01, 2022 Planned Owner Notification Date : APR 01, 2022 – APR 01, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-055 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Tiffin Motorhomes, Inc. Submission Date : FEB 08, 2022 NHTSA Recall No. : 22V-055 Manufacturer Recall No. : TIF-121 Manufacturer Information : Manufacturer Name : Tiffin Motorhomes, Inc. Address : 105 2nd Street NW PO Box 596 Red Bay AL 35582 Company phone : 999 Population : Number of potentially involved : 247 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2022 Tiffin Allegro Red Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 2020 Allegro Red – 123 2021 Allegro Red – 100 2022 Allegro Red – 24 Production Dates : JAN 01, 2020 – DEC 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Awning can become detached from sidewall of coach. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Awning could detach, which in turn could cause injury. Description of the Cause : Installers were not setting the awning in the correct location, so the screws were not hitting/penetrating the metal backer. Identification of Any Warning that can Occur : Visually inspecting the awning during pre-trip inspection or during maintenance inspection could show separation from sidewall and/or looseness. Involved Components : Part 573 Safety Recall Report 22V-055 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Awning Component Description : Covering attached to sidewall of coach that can be unfurled to provide shade or rain protection. Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 12/17/2021 Tiffin was contacted about an awning bracket detaching on one end of the patio awning on of a 2022 37 PA Allegro Red. 12/20/2021 Tiffin started investigation. 1/25/2022 Determined scope to include only the Allegro Red 37 PA floorplan due to the installation process and location of backers. 1/25/2022 Issue and findings of investigation were brought before Safety Committee members where all members voted to recall the 2020 – 2022 Allegro Red 37 PA motorhomes with sidewall mounted patio awnings. Description of Remedy : Description of Remedy Program : We are currently waiting for work instructions. However, each unit involved will be inspected to see if the awning loose, and if so it will be repaired at no charge to the customer. Details of the reimbursement plan will be included in the owner’s notification letter. How Remedy Component Differs from Recalled Component : The remedied component will now be audited during production to make sure installation of awning is in correct location and the screws are hitting/penetrating the metal backer. There will also be a second audit at the end of production. Identify How/When Recall Condition was Corrected in Production : The first audit during production was put into place 1-10-2022. Part 573 Safety Recall Report 22V-055 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Tiffin Motorhomes records to determine the names and addresses of involved. Repairs will be made at no charge to the customer. Planned Dealer Notification Date : APR 01, 2022 – APR 01, 2022 Planned Owner Notification Date : APR 01, 2022 – APR 01, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END