“This site contains affiliate links for which OEMDTC may be compensated” |
January 21, 2022 NHTSA CAMPAIGN NUMBER: 22V021000
Brake Hose Missing Designation Marking/FMVSS 106
The air brake hose end fitting may not be traceable should there be a safety recall, increasing the risk of a crash, injury, or fire.
NHTSA Campaign Number: 22V021
Manufacturer Hino Motors Sales U.S.A., Inc.
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 1
Summary
Hino Motors Sales U.S.A., Inc. (Hino) is recalling one 2021 NJ8A vehicle. The end fittings on the replacement air brake hose assembly may not have the manufacturer designation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 106, “Brake Hoses.”
Remedy
A dealer will replace the air brake hose, free of charge. Owners may contact Hino customer service at 1-248-699-9390. Hino’s number for this recall is AANT0.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
September 2021 ~December 2021
During the development of the new model vehicle, it was discovered that a particular replacement air brake hose assembly did not have the manufacturer designation on the air brake hose end fittings. Investigation revealed that a replacement air brake hose assembly was sold via a Hino dealer and installed in a single vehicle.
No other affected vehicles were identified.
January 17, 2022
Based on the investigation above, Hino confirmed that the subject air brake hose assembly meets all requirements of FMVSS 106 with the exception of the manufacturer’s designation specifically required for assemblies under FMVSS 106 S7.2.3. Therefore, Hino has determined to perform a recall on the air brake hose assemblies which were distributed through the service parts network.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
HINO | NJ8A | 2021 |
5 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-22V021-7136.PDF 216.583KB
Recall Acknowledgement
RCAK-22V021-5101.pdf 645.721KB
Recall 573 Report- (02/23/2022)
RCLRPT-22V021-2421.PDF 216.971KB
Recall Quarterly Report #1, 2022-1
RCLQRT-22V021-9148.PDF 211.146KB
Owner Notification Letter(Part 577)
RCONL-22V021-8212.pdf 167.09KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V021&docType=RCL
- Audible Audiobook
- Mile One Press (Author) - John Flaherty (Narrator)
- English (Publication Language)
- 12/15/2022 (Publication Date) - Mile One Press (Publisher)
- 【43 PCS PACKAGE】- The DOT air brake fittings kit includes: 6 pcs brass tube tee fittings, 6 pcs brass straight union connectors, 14 pcs brass straight push connectors NPT thread, 14 pcs 90°elbows NPT thread, 2 pcs brass 1/4" inflation Schrader valve, 1 pc tube cutter. Air brake fitting assortment types: 1/8", 1/4", 3/8", 1/2".
- 【PREMIUM QUALITY】- Our DOT air hose fittings are made of high-quality CA360 brass, meets D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.
- 【MAX WORKING INTENSITY】- The brass fittings can be operated in pressures from vacuum to 250psi and in temperatures from -40°F to +200°F (-40°C to +93°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations.
- 【EASY INSTALLATION】- The quick connect design and precise NPT threading make installation of air brake accessories easy, just push to connect. And there is pre-applied sealant on NPT male thread for better sealing.
- 【WIDE APPLICATION】- The brass DOT air brake fittings can be used with air suspension systems, copper tubing in airlines brake systems, perfect for truck /RV repair air line leak, also ideal for industrial workshops, daily garden or lawn mower repair, towing machine hose connection, etc.
- Direct Replacement Easy to Install
- Replaces || Red Air Supply Knob: Bendix 298817 | Yellow Parking Brake Knob: Bendix 298818
- Application || Mount on Threaded Mv-3 type dash valve to moderate pressure
- Quality || Made High Quality Plastic solid light And durable
- Specs || Thread: 5/8"
- 【14 PCS PACKAGE】- The air hose & DOT air fittings kit includes: 50 ft 1/4" air hose, 4 pcs 1/4" tee fittings, 4 pcs 1/4“ straight union, 2 pcs 1/4" 90°elbows, 2 pcs 1/4" Y splitters, 1 pc tube cutter. Air brake fitting assortment types: 1/4".
- 【PREMIUM DOT FITTINGS】- Our DOT air hose fittings are made of high-quality CA360 brass and high-strength plastic, meet D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.
- 【PREMIUM PA12 AIR HOSE】- Our air hose fittings are made of high-quality PA12 Polyamide, meet D.O.T. FMVSS 571.106 approved, SAE J844 air brake system requirements, with corrosion resistance, high-temperature ductility, high pressure resistance and long service life.
- 【MAX WORKING INTENSITY】- The brass fittings can be operated in pressures from vacuum to 250 PSI and in temperatures from -30°F to +180°F (-34°C to +82°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations.
- 【EASY INSTALLATION】- The DOT quick connect design makes the installation of air brake accessories easy, just push to connect.
- 【High Quality in Air Brake Coiled】Our air brake coiled hose is designed with superior craftsmanship and high quality nylon materials, delivering a reliable and secure connection for your air brake system.The reinforced air hose provides added protection and longer lasting performance.
- 【Brass Fitting】Air hose coiled with a 1/2" swivel brass fitting and spring guard for a secure, tractor-end connection, these air lines meet or exceed SAE J844 A hose requirements and DOT FMVSS 106 ensuring that you're getting a product that meets industry standards.
- 【SPRING JOINT】Designed air coil and power cord with a spring guard for easy coupling and uncoupling, save you time and effort. Plus, their durable construction and easy-to-install design provide peace of mind and reliable performance for years to come.
- 【Why Choose Us?】7 Way Trailer coiled is made of pure copper for long-lasting performance and excellent electrical and thermal conductivity. This ensures that your car lights, such as turn signals and brake lights, work properly during your drive.
- 【Versatile Applications】 Dazakoot electric power cables are perfect for connecting the trailer, brake, reverse, turn signals and auxiliary power on your tail, RV, camper, caravan, food van, and other towed vehicles. Before beginning any operations on the product, please refer to the diagram for guidance.
- Comprehensive Kit: the DOT air brake fittings kit includes 12 DOT union, 6 DOT tee, 4 bushing, 8 DOT male elbow connector (90°), 8 DOT straight male connector, 4 DOT male elbow connector (45°), 2 compression fittings 1/4" tube and 1/4" male, and 1 tubing cutter; Fitting types, 1/4", 3/8", 1/2", 1/8", 5/8"; They are packed in a plastic storage box with flip lock tabs; This comprehensive assortment ensures that you have the right fittings for various connections and configurations
- Quality Material: crafted mainly from CA360 brass, these air line fittings are meet with D. O. T. FMVSS 571.106 certification and compatible with SAE J1131 air brake system requirements; They are corrosion resistant, exhibit high temperature ductility, low permeability, and boast a long service life; The use of quality material ensures reliability and longevity in various air brake system applications
- Maximum Working Strength: the brass components in this brake line fittings set can operate under pressures ranging from vacuum to 300psi and temperatures from -40°F to +200°F (-40°C to +93°C); It's important to refer to the pressure and temperature recommendations from the pipe manufacturer for optimal performance and safety
- Easy Installation: featuring a quick connect design and precise threads compatible with NPT, these air brake fittings facilitate simple installation with a push to connect mechanism; Additionally, you can apply sealant on the external threads to enhance the sealing effect, making the installation process more efficient and reliable
- Wide Application: this brass air fittings set is suitable for use in air suspension systems, copper tubing in airline brake systems, truck air pipe leak repairs, industrial workshop applications, as well as maintenance for everyday garden or lawn equipment and trailer hose connections; The broad applicability of these fittings makes them a practical choice for various scenarios
- Contain common air brake fitting styles
- D.O.T Union:1/4"(4 pcs), 3/8"(4 pcs), 1/2"(4 pcs), 5/8"(2 pcs)
- D.O.T Tee:1/4"(2 pcs), 3/8"(2 pcs), 1/2"(2 pcs); Bushing: 3/8" NPT Female x 1/2" NPT Male(2 pcs)
- D.O.T Male Elbow:1/4" OD x 1/8" NPT Male(2 pcs), 1/4" OD x 1/4" NPT Male(2 pcs), 3/8" OD x 3/8" NPT Male(2 pcs), 1/2" OD x 3/8" NPT Male(2 pcs)
- D.O.T Sraight Male Connector: 1/4" x 1/8" NPT Male(2 pcs), 1/4" x 1/4" NPT Male(2 pcs), 3/8" x 3/8" NPT Male(2 pcs), 1/2" x 3/8" NPT Male(2 pcs)
- 【Includes 1 Cutter】For no air leakage, the cross section of the air line must be smooth and flat, no gap, uneven, and the tube cannot be oval. Our air tube come with a tube cutter to make cutting more convenient and easier!
- 【SAE J 844 DOT Approved】SAE J 844 Type 1/4” OD × 50FT Air Brake Line DOT approved, Tube Size: 1/4" OD × 4.35mm ID, Working Temperature: -40℉ to +248℉(-40℃ to +120℃), Max Working Pressure: 200 PSI.
- 【PA12 Nylon - High Resistance & Multiple Transfer】Boeray 1/4 inch × 50’ air hose is made of high quality Polyamide 12 nylon, meet a wide range of transportation needs, such as water, air, fuel, oil, etc. High quality abrasion and impact resistance to withstand most wear and tear.
- 【High Flexibility for easy bending】High toughness nylon tube, you can bend it easily. Note: please bend it under limited condition, do not over bend it to affect the usage.
- 【Application】Our 50ft air line is perfect for air suspension and air brake systems, fluid transfer like water oil and fuel for automotive vehicle marine, chemical transport, instrumentation lines, paint spraying, garden irrigation control systems, LPG and compressed natural gas systems, misting systems, pneumatic systems, Clutch Systems, etc.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Hino Motors Sales, U.S.A., Inc. 45501 W 12 Mile Road Novi, MI 48377 KALMER URM 45501 W 12 Mile Rd NOVI Ml 48377 IMPORTANT SAFETY RECALL MY2021 NJ7A (L6) Conventional on-road Medium Duty Truck Air Brake Hose Designation NHTSA 22V-021 Hino AANT0 This notice applies to your vehicle: VIN: Dear Hino Truck Owner: This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Hino has determined that a defect, which relates to motor vehicle safety, exists in certain 2021 Hino conventional trucks. You received this notice because our records, which are based primarily on state registration and title data, indicate that you are the current owner. What is the Condition? Hino identified a single subject vehicle with a replacement air brake hose assembly in which the end fittings of that air brake hose lacked a manufacturer designation. What will Hino do? For the subject vehicles, the dealer will replace the subject air brake hose. Please make an appointment with your authorized Hino Dealer to have the remedial work performed. This repair will be performed at NO COST to you. What should you do? You do not need an owner letter to have this recall completed; however, to assist the dealer in confirming vehicle eligibility, we request that you present this notice at the time of your service appointment. If you would like to update your vehicle ownership or contact information, you may do so by contacting Hino Warranty at warranty@hino.com or by telephone 1-248-699-9390. You will need your full 17-digit Vehicle Identification Number (VIN) to update the new ownership or contact information. What if you have other questions? URGENT SAFETY RECALL This is an important Safety Recall. The remedy will be performed at NO CHARGE to you This is an Important Safety Recall Please contact any authorized Hino dealer to schedule an appointment to have the remedial work performed as soon as possible. This repair will take approximately 1 hour to complete. 2 • Your local Hino dealer will be more than happy to answer any of your questions and set up an appointment to perform the repair. • You can locate a Hino dealer in your area by going online and visiting www.hino.com • If you require further assistance, you may contact Hino Warranty at 1-248-699-9390, Monday through Friday, 9:00 a.m. to 5:00 p.m. Eastern Time. If you believe that the dealer or Hino has failed or is unable to remedy the defect within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue S.E., Washington, D.C. 20590, or call the toll free Vehicle Safety Hot Line at 1-888-327-4236 (TTY: 1-800-424-9153), or go to www.safercar.gov. If you are a vehicle lessor, Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. We have sent this notice in the interest of your continued satisfaction with our products, and we sincerely regret any inconvenience this issue may have caused you. Thank you for being a valued Hino customer. Sincerely, HINO MOTORS SALES, U.S.A., INC.
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-021 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Hino Motors Sales U.S.A., Inc. Submission Date : JAN 21, 2022 NHTSA Recall No. : 22V-021 Manufacturer Recall No. : AANT0 Manufacturer Information : Manufacturer Name : Hino Motors Sales U.S.A., Inc. Address : 45501 Twelve Mile Road Novi MI 48377 Company phone : 248-699-9300 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 HINO NJ8A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : ALL Power Train : DIESEL Descriptive Information : Hino identified a single subject vehicle with a replacement air brake hose assembly in which the end fittings of that air brake hose lacked a manufacturer designation. The parts that are subject to the recall, which were distributed through the Service Parts Network, may not contain a manufacturer designation pursuant to 49 C.F.R. 571.106 S7.2.2(b) and 49 C.F.R. 571.106 S7.2.3.1. Production Dates : JAN 31, 2020 – JAN 31, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Noncompliance : Description of the Noncompliance : On certain replacement part air brake hose assemblies, air brake hose end fittings may not have a designation for identifying the manufacturer. Therefore, the air brake hose end fittings may not contain the designation requirement of FMVSS No.106 S7.2.2 (b) and FMVSS No.106 S7.2.3.1. FMVSS 1 : 106 – Brake hoses FMVSS 2 : NR Description of the Safety Risk : An air brake hose end fitting without the manufacturer designation may not be traceable should there be a concern with performance. Hino has determined the brake hose assembly, although missing the manufacturer’s designation, meets all of the performance requirements of FMVSS 106. Description of the Cause : A change in replacement part air brake hose assembly supplier resulted in the missing manufacturer designation. Identification of Any Warning that can Occur : N/A Part 573 Safety Recall Report 22V-021 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : HOSE SUB-ASSY, AIR Component Description : AIR BRAKE HOSE Component Part Number : S4703-E0W40 Supplier Identification : Component Manufacturer Name : MEIJI FLOW SYSTEMS CO., LTD. Address : Kasei-Machi 31-7, Nobusawa Kanagawa Prefecture Ashigarakami-Gun Foreign States 256-0026 Country : Japan Chronology : September 2021 ~December 2021 During the development of the new model vehicle, it was discovered that a particular replacement air brake hose assembly did not have the manufacturer designation on the air brake hose end fittings. Investigation revealed that a replacement air brake hose assembly was sold via a Hino dealer and installed in a single vehicle. No other affected vehicles were identified. January 17, 2022 Based on the investigation above, Hino confirmed that the subject air brake hose assembly meets all requirements of FMVSS 106 with the exception of the manufacturer’s designation specifically required for assemblies under FMVSS 106 S7.2.3. Therefore, Hino has determined to perform a recall on the air brake hose assemblies which were distributed through the service parts network. Description of Remedy : Description of Remedy Program : For the subject affected vehicle, the dealer will directly contact the owner and replace the subject hose free of charge. How Remedy Component Differs from Recalled Component : The remedy air brake hose assembly has the manufacturer designation on the end fittings. Identify How/When Recall Condition was Corrected in Production : N/A Part 573 Safety Recall Report 22V-021 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-021 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Hino Motors Sales U.S.A., Inc. Submission Date : FEB 23, 2022 NHTSA Recall No. : 22V-021 Manufacturer Recall No. : AANT0 Manufacturer Information : Manufacturer Name : Hino Motors Sales U.S.A., Inc. Address : 45501 Twelve Mile Road Novi MI 48377 Company phone : 248-699-9300 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 HINO NJ8A Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : ALL Power Train : DIESEL Descriptive Information : Hino identified a single subject vehicle with a replacement air brake hose assembly in which the end fittings of that air brake hose lacked a manufacturer designation. The single replacement air brake hose assembly identified did not contain a manufacturer designation pursuant to 49 C.F.R. 571.106 S7.2.2(b) and 49 C.F.R. 571.106 S7.2.3.1. The single replacement air brake hose assembly was distributed through the Service Parts Network. Production Dates : JAN 31, 2020 – JAN 31, 2020 VIN Range 1 : Begin : 5PVNJ8AV6M5T50057 End : 5PVNJ8AV6M5T50057 Not sequential VIN Range 2 : Begin : 5PVNJ8AV6M5T50057 End : 5PVNJ8AV6M5T50057 Not sequential Description of Noncompliance : Description of the Noncompliance : The single replacement air brake hose assembly end fitting did not contain the manufacturer designation requirement of FMVSS No.106 S7.2.2 (b) and FMVSS No.106 S7.2.3.1. FMVSS 1 : 106 – Brake hoses FMVSS 2 : NR Description of the Safety Risk : Hino identified a single vehicle with an air brake hose end fitting that did not contain the manufacturer designation pursuant to FMVSS No.106 S7.2.2 (b) and FMVSS No.106 S7.2.3.1. Hino has determined the single subject air brake hose end fitting, although missing the manufacturer’s designation, met all of the performance requirements of FMVSS 106. The single subject air brake hose end fitting may not be traceable should there be a performance concern, increasing the risk of a crash, injury, or fire. Part 573 Safety Recall Report 22V-021 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of the Cause : A change in the supplier that provided the replacement part air brake hose assembly resulted in the missing manufacturer designation on a single air brake hose assembly installed as a replacement on a single vehicle. Identification of Any Warning that can Occur : N/A Involved Components : Component Name 1 : HOSE SUB-ASSY, AIR Component Description : AIR BRAKE HOSE Component Part Number : S4703-E0W40 Supplier Identification : Component Manufacturer Name : MEIJI FLOW SYSTEMS CO., LTD. Address : Kasei-Machi 31-7, Nobusawa Kanagawa Prefecture Ashigarakami-Gun Foreign States 256-0026 Country : Japan Chronology : September 2021 ~December 2021 During the development of the new model vehicle, it was discovered that a particular replacement air brake hose assembly did not have the manufacturer designation on the air brake hose end fittings. Investigation revealed that a replacement air brake hose assembly was sold via a Hino dealer and installed in a single vehicle. No other affected vehicles were identified. January 17, 2022 Based on the investigation above, Hino confirmed that the subject air brake hose assembly meets all requirements of FMVSS 106 with the exception of the manufacturer’s designation specifically required for assemblies under FMVSS 106 S7.2.3. Therefore, Hino has determined to perform a recall on the air brake hose assemblies which were distributed through the service parts network. Part 573 Safety Recall Report 22V-021 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : For the subject affected vehicle, the dealer directly contacted the owner and replaced the subject hose free of charge on February 8, 2022. How Remedy Component Differs from Recalled Component : The remedy air brake hose assembly has the manufacturer designation on the end fittings. Identify How/When Recall Condition was Corrected in Production : N/A Recall Schedule : Description of Recall Schedule : On or before February 8, 2022, the single brake hose assembly for this single subject vehicle was repaired and replaced by the dealer without charge to the owner. Notification of the noncompliance to the dealer and owner was completed on or before February 8, 2022. Planned Dealer Notification Date : FEB 08, 2022 – FEB 08, 2022 Planned Owner Notification Date : FEB 08, 2022 – FEB 08, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END