| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10194471
Manufacturer Communication Number: Bulletin 2019-4
Summary
“Warranty Bulletin no 2019-4
Valve Train Covers Paint Peeling”
PROBLEM
Valve train covers paint peeling on some vehicles.
SOLUTION
Inspect vehicle for valve train covers paint defects.
Replace valve train covers if inspection reveals defects.
PARTS REQUIRED
Order parts through regular channel.
| DESCRIPTION | PART NUMBER | QTY |
| Valve train upper cover | 420210863 | 1 |
| Gasket | 420450040 | 1 |
| Valve train lower cover | 420210296 | 1 |
| Gasket | 420450010 | 1 |
| Recommended oil as per SHOP MANUAL | – | 100 ml (3.38 U.S. oz) |
CORRECTIVE ACTION
Inspection
Clean the valve train covers using XPS ROADSTER WASH (P/N 219 701 703) to remove any grease or dust.
Apply a high adhesive tape such as DUCT TAPE on the valve train covers.
Remove the tape.
Inspect for paint discoloration or any paint peeling.
If inspection does not reveal any defects, no other action is necessary.
If inspection reveals defects, perform the repair.
Repair
Lift vehicle LH side from the ground in order to prevent oil spillage.
Replace the valve train covers according to appropriate SHOP MANUAL procedure using new gaskets.
Return vehicle on the ground.
Verify oil quantity and refill as necessary.
Start engine and make sure there is no leak.
SEOCONTENT-START
WARRANTY
BULLETIN
WARRANTY CAMPAIGN
CAUTION: All involved customers must be notified, all involved units must be corrected as per instruction herein.
Can-Am® On-Road SpyderTM
February 12, 2019 Subject:Valve Train Covers Paint Peeling No. 2019-4
MODEL YEAR MODEL ADMISSIBLE UNITS
2019 Spyder F3
Go to BOSSWeb/Warranty/Campaign Monitoring to know the
quantity of units in your inventory impacted by this campaign
IMPORTANT
– When a vehicle comes in for service, always type the VIN in Knowledge Center to
check for pending campaigns or alerts.
– When performing any work on a vehicle, it is good practice to connect it to BUDS2
to ensure that all needed updates are done.
WARRANTY
Submit a warranty claim using the following information.
NOTE: Please refer to VIN Search in the Knowledge
Center to identify which of the 3 below campaigns
applies to the vehicle
For claiming procedure, refer to the DEALER/DISTRIBUTOR
WARRANTY GUIDE.
Inspection Only
Product Line Spyder
Unit Model Year 2019
Campaign/Bulletin/
Description
5 / 2019-4/ F3 ENGINE
COVER INSPECTION
Total Labor time paid 0.3 hour
Expiration date April 30, 2022
Repair of the Upper Cover
Product Line Spyder
Unit Model Year 2019
Campaign/Bulletin/
Description
6 / 2019-4 / F3 UPPER
ENGINE COVER
REPLACEMENT
Total Labor time paid 0.2 hour
Expiration date April 30, 2022
NOTE: A fix amount was included to cover the
cost of oil refill.
Repair of the Lower Cover
Product Line Spyder
Unit Model Year 2019
Campaign/Bulletin/
Description
7 / 2019-4 / F3 LOWER
ENGINE COVER
REPLACEMENT
Total Labor time paid 0.3 hour
Expiration date April 30, 2022
NOTE: A fix amount was included to cover the
cost of oil refill.
SEOCONTENT-END
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| CAN-AM | SPYDER F3 | 2019 |
1 Associated Document
Manufacturer Communications
2019-4
February 12, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10194471
MC-10194471-0001.pdf 1623.065KB
Loading...
Reload document 
Open in new tab
- Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
- Race derived technology for maximum engine acceleration
- Extreme high temperature air-cooled performance and water-cooled engine performance
- Excellent shear stability to prevent viscosity breakdown
- Exceeds API SL and JASO MA-2
- 100% Synthetic Ester
- Formulated To Meet The Latest Manufacturers' Specifications
- Improved High Temperature Deposit Protection And Sludge Control
- Ensures Optimum Clutch Performance At Start-Up, Acceleration, And Full Speed
- Standards: Ape Sn, Jasso Ma2
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wear protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Ideally suited for wet clutches
- Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
- Full synthetic 5W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, oil breakdown, and improves low-temperature flow
- Exceptional wear protection for longer life in a wide range of heavy-duty engine applications — from pickup trucks to tractors to semi rigs
- Enhanced fuel economy capability of 1.5 percent without compromising engine protection or durability (compared to 15W-40 oils)
- Multi-functional dispersant additives provide an enhanced level of protection against the effects of soot, dirt, and other contaminants (compared to previous formulation)
- Increased shear stability for better viscosity control and optimal engine oil pressure
- 100% Synthetic Double Ester
- Designed for highly modified engines
- Electrochemical bonding to metal parts
- Up to 5x higher film strength
- 0% shear loss on Bosch ASTM D6278 test
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wearing protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Ideally suited for wet clutches
- Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
- Please see Product Description regarding the California Proposition 65 Warning
- Practiced and tested extensively with KTM, Husqvarna, Yamaha, Kawasaki, Honda, Aprilia, BMW, Suzuki, Ducati, Triumph, and Moto-Guzzi motorcycles
- High performance full synthetic oil utilizing the latest lubrication technology
- Excellent engine protection in all conditions including extreme high stress racing conditions
- Excellent cold start lubrication, low oil evaporation tendency, suitable for motorcycles with catalytic converters
- XPS synthetic 4-stroke oil is specifically engineered to meet the particular lubrication requirements of Can-Am, Spyder and Sea-Doo vehicles equipped with Rotax 4-TEC 4-stroke engines.
- Powersport formula with premium anti-wear and anti-corrosion additives
- Designed for high-performance off-road, on-road and PWC 4-stroke engines, including turbo or supercharged Powersports engines
- Provides superior engine and transmission protection against rust and corrosion even in extreme conditions
- Ambient temperature operating range: -31°F / 104°F (-35°C / 40°C)
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.