“This site contains affiliate links for which OEMDTC may be compensated” |
September 1, 2021 NHTSA CAMPAIGN NUMBER: 21V684000
Brake Pedal Cotter Pin Not Installed Properly
An unsecured brake pedal can cause a loss of braking ability and increase the risk of a crash.
NHTSA Campaign Number: 21V684
Manufacturer Mack Trucks, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 2,823
Summary
Mack Trucks, Inc. (Mack) is recalling certain 2020-2022 Mack MD vehicles. The cotter pin that retains the brake pedal clevis pin may not have been properly installed, which could result in an unsecured brake pedal.
Remedy
Dealers will inspect the cotter pin installation and repair it as necessary, free of charge. Owner notification letters were mailed on September 13, 2021. Owners are advised to not drive their vehicles until the remedy has been performed. Owners may contact Mack’s customer service at 1-800-866-1177. Mack’s number for this recall is SC0429.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Description
Mack Trucks, Inc. (Mack) is recalling certain 2020 through 2022 MD model vehicles manufactured from November 18, 2019 through August 31, 2021. The cotter pin that retains the brake pedal clevis pin may not have been properly installed.
If the cotter pin comes out, the clevis pin may work loose, which can affect the operation of the brake pedal and the ability to stop the vehicle. This presents a risk of a vehicle crash. Mack has not received any reports of vehicle crashes.
Out of an abundance of caution, the owner letter will request customers to park these vehicles until they are inspected and cleared or repaired.
The cotter pin will be inspected and repaired if needed.
Model and Model Years Affected
- Certain Mack 2020 & 2022 MD model vehicles
Vehicle Quantities
- 2,946 (2,823 US, 123 Canada)
Dealer Responsibilities
- The National Traffic and Motor Vehicle Safety Act and Canadian Motor Vehicle Safety Act requires dealers to ensure that all new and used vehicles are free of safety defects and comply with all relevant safety standards at the time of delivery to the consumer.
- Dealers should make their personnel aware of the safety recall. In the event that a dealer has a vehicle included in the safety recall in their inventory to be sold, the condition must be corrected before releasing it to a customer.
- Due to nature of this issue, we request that dealers with the ability send technicians to customer locations in order to perform the recall as quickly as possible. This activity will be compensated by the recall.
Notification Release Schedule
- Vehicle list will be posted on the Trucks Dealer Portal on September 3, 2021
- Owner notification letters will be released on or before September 13, 2021
Contact
If you have questions or concerns about this recall, contact the Regulatory Affairs Department at vtna.regulatoryaffairs@volvo.com.
Brake Pedal Inspection MD6 and MD7
RECALL INFORMATION
(September, 2021)
Mack has determined that certain model years 2020 through 2022 Mack Medium Duty (“MMD”) vehicles, may have improper installation of the cotter pin that retains the brake pedal clevis pin. If the cotter pin comes out, the clevis pin may work loose, which can affect the operation of the brake pedal and the ability to stop the vehicle. This presents a risk of a vehicle crash.
Mack Trucks has not received any complaints or reports of vehicle crashes because of this possible safety concern.
To ensure that these vehicles meet Mack’s stringent quality requirements, an inspection of the securing hardware is required.
VEHICLES AFFECTED
Certain Mack North America vehicles manufactured between November 18, 2019 through August 31, 2021.
VEHICLE QUANTITY
There are 2946 vehicles affected by this recall (2,823 U.S., 123 Canada).
Parts Information
Part Numbers | Part Names | Quantity |
25092821 | Split Pin | As needed |
Repair Instructions
- Park the vehicle on a level surface.
- Apply the parking brake.
- Place the gear lever in neutral.
- Install the wheel chocks.
- Disconnect the cable from the negative terminal
- Remove the screws.
- Remove the panel.
- Remove the screw.
- Remove the panel.
- Remove the screws.
- Remove the panel.
- Inspect the service brake pedal hardware, Clevis Pin (#1) and Split Pin (#2), for proper installation.
a. If incorrect installation, missing hardware, or the split pin not adequately spread is found report this quality issue; by open an E-Service Case to Reliability Department using the Recall Number SC0429 in the title. A picture of the quality issue found is required.
b. If installation of brake pedal is correct, continue with reassemble. No E-Service to Reliability is needed.
- Replace any missing hardware and ensure the Split Pin (#2) is spread to 70 degrees (as seen in image above).
- Install the panel.
- Install the screws.
- Torque tighten the screws.
- Install the panel.
- Install the screw.
- Install the panel.
- Install the Screws.
- Torque tighten the screws.
- Connect the cable to the negative terminal.
- Remove the wheel chocks.
- Return vehicle to service.
3 Affected Products
Vehicle
MAKE | MODEL | YEAR |
MACK | MD | 2020-2022 |
12 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-21V684-3642.pdf 140.138KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21V684-1847.PDF 211.243KB
Recall Acknowledgement
RCAK-21V684-2032.pdf 645.776KB
Defect Notice 573 Report
RCLRPT-21V684-4824.PDF 213.831KB
Recall 573 Report- Amendment 2
RCLRPT-21V684-5391.PDF 214.042KB
Recall 573 Report- Amendment 1
RCLRPT-21V684-2524.PDF 214.042KB
Remedy Instructions and TSB
RCRIT-21V684-4241.pdf 1177.507KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21V684-0983.PDF 211.144KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V684-9031.pdf 114.103KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V684-9054.pdf 122.325KB
Owner Notification Letter(Part 577)
RCONL-21V684-6704.pdf 674.752KB
Recall Quarterly Report #3, 2022-1
RCLQRT-21V684-1838.PDF 211.322KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V684&docType=RCL
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test; ✅Advanced ECU Coding;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen, Injector Coding,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems.Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚜ADVANCED ECU CODING & PROGRAMMING:ANCEL V5 HD diesel truck scan tool comes with a powerful ECU programming and coding function, allowing you to reprogramme and decode the electronic control units (ECUs) of the vehicle.This feature is especially useful for technicians who need to update software,adjust parameters,or perform other modifications to the vehicle's electronic systems.🚦Note: ECU Coding is not universal to all cars, please check compatibility with VIN before order.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
- 🌟【Run Your DPF Cleaner, Longer -Renew, Don't Replace!】Safeguard your truck from breakdowns and and high repair costs with focused DPF care. Opt for HD3400, featuring DPF regen, reset, DPR state control, and more, tailored for engines like Cummins, Detroit, Caterpillar, etc. Imagine this: easy and cost-effective DPF regen saving you from potential $10,000 to $30,000 in repairs. Unlock compliance-free operation for improved fuel efficiency, extended engine life, and significant cost savings
- 🚜【Maximize Caterpillar Engine Trucks' Potential!】HD3400 Plus diesel scanner, exclusively for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more) commonly found in trucks like Caterpillar, Ford Pick-up, Freightliner, Peterbilt, Kenworth. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration and more. Unleash your Caterpillar engine's power!
- 🚛【Designed for Detroit Engine Trucks】ANCEL HD3400 heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks – class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7.
- 🚐【Designed for Paccar Engine Trucks】ANCEL HD3400 heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13. ❗Note: PACCAR engines post-2016 require a CAN-3 adapter for forced DPF regeneration. If you want to perform DPF regen for your PACCAR engines manufactured after 2016, please find us to get the additional CAN-3 adapter.
- 🌟【Unlock Advanced DPF Regeneration】Our diesel scanner diagnostic tool excels in DPF reset, providing active/forced regeneration and advanced DPF state control. Save time and money on DPF maintenance, making it the top choice for truck diagnostics. Elevate your DPF maintenance with our advanced features!
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 PRO heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks from 1996 and latest.
- 【OE-Level Full System Diagnostic】HD601 PRO Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, BendixWabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money.
- 【Enhanced Diesel OBD Scanner】As a 2-in-1 code reader, it supports the latest ISO27145 and Euro6 protocols and enables diagnosis of car and truck engines. In addition to reading codes, clearing codes and displaying live data in a text or graphic format for trucks, you can also retrieve vehicle information, view freeze frames and look up DTCs. To ensure that this device works with different engines, it is also equipped with 6, 9 and 16 pin cables that allow you to easily turn off the CEL light.
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 【Full Systems Heavy Duty Scanner Tool】:this heavy duty scanner tool supports Read DTC and Clear DTC, Live Data,Engine Check, Transmission, Drivetrain, Suspension, Cluster, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols,
- 【OBD2/HDOBD/EOBD All Diagnosis】: supports both all 12V and all 24V truck, with 6 pin and 9 pin adapters for different interfaces.It support reading code, earsing trouble codes, Live Data, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, O2 Sensor Test, On-board Monitor, Vehicle Identification Info.It can lookup DTC, translates the related code's meaning to help you know what's wrong with the car.
- 【Suitable for Most Trucks】:diesel diagnostic scanner support all truck standard protocols SAEJ1939/ J1587/ J1708,it work on heavy duty trucks/ light truck/ mini vans/ buses/ pickups from1996 to now.
- 【CANBUS System】:Detect the CANBUS node, and easily find out the wrong modoles and lines.
- 【Professional Automotive Scanner Diagnostic Tools】:Designed specifically for HDOBD/OBD2/EOBD.This HD10 covers all the functions of HDOBD,OBD2,and EOBD. What is more important is that it provide the results correctly and quickly, and you can read the results with graghs, which make you easier to read.
- 👍【2024 Newest wide Coverage for Heavy truck】: With support for standard HD OBD protocols and customized protocols, ANCEL HD3400 PRO provides 98% coverage for heavy truck models in the US market, including those with Cummins, Detroit, Caterpillar, Paccar engines,and trucks like Ford, Autocar, western star, Freightliner, Kenworth, Peterbilt, caterpillar,Terex, Thomas, Sany, Komatsu, Agrifac , Isuzu, Fuso, Hino,Volvo and more.
- 🚛【Available for Cummins 】ANCEL HD3400 Pro is specifically designed to support a wide range of Cummins engines found in trucks like Ford, Volvo, Freightliner, Kenworth, and more, as well as Sany machinery, Agrifac vehicles, RVs, and more. Compatible with ISX, ISM, ISN, QSB, X12, ISB, ISC, ISD, ISG, ISK, ISL, X15, B6.7, L9, L9N, QSM11, and other popular models.
- 🚒【Available for Caterpillar】exclusively designed for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more), you can perform top-notch diagnostics to keep your trucks running reliably. Compatible with popular truck models like Kenworth, Peterbilt, Freightliner, International, Mack, and Volvo.
- 🚛【Available for Paccar&Detroit】ANCEL HD3400 PRO is compatible with a wide range of engine types, including Detroit engines (Series 50, Series 55, Series 60, OM501, OM502, DD5, DD13, DD15, DD16,MBE 900, MBE 4000, DD8, DDDL 6, DDDL 7, CPC2, CPC02T, CPC04T, CPC302T and More) and Paccar engines(PX-7, PX-9, MX-11, MX-13 and more). like medium-duty or light-duty trucks, or even semi-trucks
- 🚒【Superb Lifetime Free Update,Best Bang For The Buck】ANCEL HD3400 PRO diesel code reader allow our customers get the latest version with free update via WIFI,With Lifetime Free Update,HD3400 PRO is way more valuable by comparing with the other OBD diagnosis,which can save hundreds of dollar for our customers!
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Date Number Release Page 09.2021 SC0429 01 1(7)
Brake Pedal Inspection
MD6 and MD7
RECALL INFORMATION (September, 2021) Mack has determined that certain model years 2020 through 2022 Mack Medium Duty (“MMD”) vehicles, may have improper installation of the cotter pin that retains the brake pedal clevis pin. If the cotter pin comes out, the clevis pin may work loose, which can affect the operation of the brake pedal and the ability to stop the vehicle. This presents a risk of a vehicle crash. Mack Trucks has not received any complaints or reports of vehicle crashes because of this possible safety concern. To ensure that these vehicles meet Mack’s stringent quality requirements, an inspection of the securing hardware is required. VEHICLES AFFECTED Certain Mack North America vehicles manufactured between November 18, 2019 through August 31, 2021. VEHICLE QUANTITY There are 2946 vehicles affected by this recall (2,823 U.S., 123 Canada).
Safety
Recall
Mack Trucks Inc.
Greensboro, NC USA
Page 2 of 7
Parts Information
Repair Instructions
1. Park the vehicle on a level surface.
2. Apply the parking brake.
3. Place the gear lever in neutral.
4. Install the wheel chocks.
5. Disconnect the cable from the negative terminal
6. Remove the screws.
7. Remove the panel. Part Numbers Part Names Quantity
25092821
Split Pin
As needed
Mack Truck Inc.
Safety Recall Date 09.2021 Page 3 of 7
8. Remove the screw.
9. Remove the panel.
10. Remove the screws.
11. Remove the panel.
Page 4 of 7
12. Inspect the service brake pedal hardware, Clevis Pin (#1) and Split Pin (#2), for proper installation.
a. If incorrect installation, missing hardware, or the split pin not adequately spread is found report this quality issue; by open an E-Service Case to Reliability Department using the Recall Number SC0429 in the title. A picture of the quality issue found is required.
b. If installation of brake pedal is correct, continue with reassemble. No E-Service to Reliability is needed.
13. Replace any missing hardware and ensure the Split Pin (#2) is spread to 70 degrees (as seen in image above).
14. Install the panel.
15. Install the screws.
16. Torque tighten the screws.
Mack Truck Inc.
Safety Recall Date 09.2021 Page 5 of 7
17. Install the panel.
18. Install the screw.
19. Install the panel.
20. Install the Screws.
21. Torque tighten the screws.
22. Connect the cable to the negative terminal.
Page 6 of 7
23.Remove the wheel chocks.
24.Return vehicle to service.
Mack Truck Inc.
Safety Recall Date 09.2021 Page 7 of 7
REIMBURSEMENT
This repair is covered by an authorized Safety recall. Reimbursement is obtained through the normal claim handling process.
UCHP Reimbursement Claim Type (used only when uploading from the Dealer Business System)
40
Recall Status
Vehicle repaired per instructions
1-Modified per instructionsLabor Codes
Primary Labor Code: 1720-16-09-01 Campaign, General x3
0.3 Causal Part
82218333 Authorization Number
C6632
Note: Dealers are to perform Safety Recall on all subject vehicles at no charge to the vehicle owner regardless of mileage, age of vehicle or ownership (original purchaser or subsequent purchasers). Whenever vehicles are subject to a Safety Recall are brought to your dealership for service, or taken into your dealership vehicle inventory, it is strongly recommended that every effort be made to perform the recall correction before the vehicle is sold or released to the owner.
**************************************************************************************************************
A IVI..A.C:1<0 IMPORTANT SAFETY RECALL INFORMATION. URGENT ACTION REQUIRED! DO NOT OPERATE VEHICLE UNTIL BRAKE PEDAL IS INSPECTED AND/ OR REP AIRED September 16, 2021 Subject: Recall SC0429, Brake Pedal Inspection Dear Valued Mack Customer, This letter is being sent to inform you of a safety-related defect that requires immediate attention. The defect is the cotter pin that retains the brake pedal clevis pin may not have been properly installed. The safety risk is that if the cotter pin comes out, the clevis pin that holds the brake pedal may work loose, which can affect the operation of the brake pedal and ability to stop the vehicle. Out of an abundance of caution, we are asking that the suspect vehicles be parked until an inspection can be performed and the vehicle cleared as good or repaired if the cotter pin is not properly secured. Our staff, dealers, and service facilities are ready to support you to either have your vehicle(s) towed or a technician sent to the vehicle to perform the inspection. You should contact the nearest Mack Parts and Service Center and make an appointment. Mack dealers will inspect the cotter pin and repair if needed at no charge to you. You can locate the closest Mack Patts and Service Center by going on line to https://www.macktrucks.com/ and selecting “Dealer & Service Locations” or by .calling our toll-free number: 1-800-866-1177. This notification is an additional notification to the letter being sent by First Class Mail that you may have already received. The first-class mail letter will contain a list of Vehicle Identification numbers (VINs) that according to our rec01:ds are registered to your company. A list of the VINs that we show registered to you is also provided below or attached: We regret any inconvenience this may cause to your operation but hope you will appreciate our sincere efforts to demonstrate Mack’s commitment to provide our customers with the best possible product. MACK TRUCKS, INC. Mack Trucks, Inc. 7825 National Service Road Greensboro, NC 27409 Telephone 336-393-2000
**************************************************************************************************************
SC0429_OWNER_LTR
September 2021
DEAR MACK TRUCK OWNER:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Mack Trucks, Inc. has decided that a defect which relates to motor vehicle safety may exist in a certain 2020 through 2022 MD model vehicles manufactured from November 18, 2019 through August 31, 2021.
SAFETY DEFECT:
The cotter pin that retains the brake pedal clevis pin may not have been properly installed.
SAFETY RISK:
If the cotter pin comes out, the clevis pin may work loose, which can affect the operation of the brake pedal and the ability to stop the vehicle. This presents a risk of a vehicle crash.
PRECAUTIONS YOU CAN TAKE:
TIME REQUIRED FOR THE REPAIR:
Mack requests customers to park these vehicles until they are inspected and cleared or repaired.
The time required to inspect and/or repair your vehicle is approximately 0.5 hours.
WHAT YOU SHOULD DO:
You should contact the nearest Mack Parts and Service Center and make an appointment. Mack dealers will inspect the cotter pin and repair if needed at no charge to you.
You can locate the closest Mack Parts and Service Center by going on line to https://www.macktrucks.com/ and selecting “Dealer & Service Locations” or by calling our toll-free number: 1-800-866-1177.
IMPORTANT SAFETY RECALL SC0429
NHTSA RECALL # 21V-684
SC0429_OWNER_LTR
September 2021
NOTICE REGARDING LEASED VEHICLES:
If you are a Lessor of vehicles subject to this Notice, you have an obligation under Federal Law to provide a copy of this Notice to all Lessees within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the Lessee(s) to whom you send a copy of this letter, the date you send this letter, and the Vehicle Identification Number(s) of the vehicle(s) that you have leased to that lessee. For purposes of this Notice, the term Lessor means: a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles (as defined in CFR Section 577.4), as of the date of notification by the manufacturer of the existence of a safety-related defect or non-compliance with a Federal Motor Vehicle Safety Standard in one or more of the leased motor vehicles.
OWNER RECALL RESPONSE CARD:
The enclosed “Notice of Vehicle Recall” identifies your vehicle. If you no longer own the vehicle, please help us update our records by completing the “Vehicle Disposition Record” portion of the enclosed postage-free Notice of Mandatory Safety Campaign card and mailing it back to us.
ASSISTANCE/
COMPLAINTS:
PRE NOTIFICATION
REMEDIES:
If your vehicle has not been repaired within a reasonable time after delivering it to a Mack Parts and Service Center, please contact:
Mack Trucks, Inc.
Regulatory Affairs Department,
P.O. Box 26115
Greensboro, NC 27402-6115
vtna.regulatoryaffairs@volvo.com
You may also submit complaints to the Administrator of the National Highway Traffic Safety Administration (1200 New Jersey Avenue, S.E., Washington DC 20590 or call the toll-free Auto Safety Hot Line at 1-888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov if you believe that Mack has failed to remedy the defect without charge, or has failed to remedy the vehicle within 60 days of the owners first tender to obtain repair following the earliest time that parts are available.
If you have previously paid for repairs as a result of this issue, you may be entitled to recovery of those expenses.
Submit copies of all documentation supporting your claim according to the rules specified in the “General Plan for Reimbursement of Pre-notification Remedies” provided in this mailing.
We regret any inconvenience this may cause to your operation, but hope you will appreciate our sincere efforts to demonstrate Mack’s commitment to provide our customers with the best possible product.
MACK TRUCKS, INC.
**************************************************************************************************************
MACK TRUCKS
RECALL ALERT
© Mack Trucks, Inc. CONFIDENTIAL – For limited distribution only to circulation list above. This bulletin, and any information herein, is subject to change by Company without notice. For the most current and accurate information, always refer to Trucks Dealer Portal for the electronic version of this document.
Description
Mack Trucks, Inc. (Mack) is recalling certain 2020 through 2022 MD model vehicles manufactured from November 18, 2019 through August 31, 2021. The cotter pin that retains the brake pedal clevis pin may not have been properly installed.
If the cotter pin comes out, the clevis pin may work loose, which can affect the operation of the brake pedal and the ability to stop the vehicle. This presents a risk of a vehicle crash. Mack has not received any reports of vehicle crashes.
Out of an abundance of caution, the owner letter will request customers to park these vehicles until they are inspected and cleared or repaired.
The cotter pin will be inspected and repaired if needed.
Model and Model Years Affected
• Certain Mack 2020 & 2022 MD model vehicles
Vehicle Quantities
• 2,946 (2,823 US, 123 Canada)
Dealer Responsibilities
• The National Traffic and Motor Vehicle Safety Act and Canadian Motor Vehicle Safety Act requires dealers to ensure that all new and used vehicles are free of safety defects and comply with all relevant safety standards at the time of delivery to the consumer.
• Dealers should make their personnel aware of the safety recall. In the event that a dealer has a vehicle included in the safety recall in their inventory to be sold, the condition must be corrected before releasing it to a customer.
• Due to nature of this issue, we request that dealers with the ability send technicians to customer locations in order to perform the recall as quickly as possible. This activity will be compensated by the recall.
Notification Release Schedule
• Vehicle list will be posted on the Trucks Dealer Portal on September 3, 2021
• Owner notification letters will be released on or before September 13, 2021
Contact
If you have questions or concerns about this recall, contact the Regulatory Affairs Department at vtna.regulatoryaffairs@volvo.com.
Subject:
Safety Recall SC429, MD Brake Pedal cotter pin
Recall Number:
SRA-M429
Date:
September 3, 2021
Applicable Markets:
☒U.S. ☒Canada
**************************************************************************************************************
MACK TRUCKS
UPTIME
© 2020 Mack Trucks, Inc. CONFIDENTIAL – For limited distribution only to circulation list above. This bulletin, and any information herein, is subject to
change by Company without notice. For the most current and accurate information, always refer to Trucks Dealer Portal for the electronic version of this
document.
Warranty News
Thank you for your prioritized actions which have already addressed 60% of the recall population. Please review the following pointers intended to support you in our continued, joint efforts to reach 100% completion:
• ***NEW*** The Uptime Dashboard now includes the current list of vehicles associated with your dealership that are awaiting completion of this recall.
o “Safety Recall SC429” tab includes remaining VIN’s with “In-Service” status, customer name, and address of last known location.
o The list can be easily downloaded into Excel by right-clicking on the dashboard report.
o Completed vehicles will be removed from the list every Tuesday and Thursday.
• Recalled vehicles must remain parked until they are inspected and either cleared or repaired.
• Vehicles must have this recall completed before they can be registered “In-Service.” Reference Warranty Operations Manual (WOM) 4.3.9.2.
• Compensation for the costs of performing this recall includes:
o Inspection and Repair – Reference Safety Recall Service Instructions.
o Road Service – Travel time at dealer’s labor rate and service vehicle mileage.
▪ File under “Other Costs” on the Campaign claim.
o Towing – Towing cost and sublet fee to nearest authorized repair facility.
▪ File under “Other Costs” on the Campaign claim.
• Claims must be submitted within 2 days of inspection/repair completion. Reference WOM 4.3.9.2.
• The “Owner Recall Authorization and Release Form” is posted in WOM 4.3.9.2 for any customers who prefer to inspect/repair the truck themselves.
Please share any questions or recommendations via the Warranty Inquiry form here.
Thank you for your continued action and dedication to Customer Uptime!
To:
Dealer Principals
Service Managers
Warranty Administrators
Region:
☒U.S.
☒CAN
Bulletin: 2021-05
Date: October 8, 2021
Action Required? ☒Yes ☐No
From:
Kev Yacoubian, Director Warranty
Subject:
Safety Recall SC429, MD Brake Pedal Cotter Pin
SEOCONTENT-END