2018-2020 Renegade Vienna, IKON, Classic, Toters, & Garage Recreational Vehicles Window Adhesive Failure

“This site contains affiliate links for which OEMDTC may be compensated”

Window Adhesive Failure

Adhesive failure may cause the vent portion of the window to detach, increasing the risk of a crash or injury.

 

NHTSA Campaign Number: 21V644

Manufacturer Kibbi, LLC

Components STRUCTURE, EQUIPMENT

Potential Number of Units Affected 418

 

Summary

Kibbi, LLC (Kibbi) is recalling certain 2018-2020 Renegade Vienna, IKON, Classic, Toters, and Garage recreational vehicles equipped with Lippert Hehr 6400 series windows. The adhesive that bonds the vented portion of the window may fail.

 

Remedy

Dealers will inspect the windows, and replace the vent if necessary, free of charge. Owner notification letters were mailed on September 1, 2021. Owners may contact Kibbi’s customer service at 1-574-966-0196.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


We have been notified by Lippert Components Inc. of a potential defect with 6400 Series windows installed in your unit. Lippert Components Inc. has issued a formal recall on these windows and will execute a remedy at no charge to the end user as quickly as possible.

 

This notice pertains to Vin. #Unit #

Once Recall is remedied via the attached instructions provided by Lippert , please have the service center return this notice providing the completed information below to Jeremy Slinker (contact information below).

 

Date Remedied

Dealer Representative

Renegade is committed to providing the best products that enable our customers to enjoy a mobile lifestyle and we apologize for any inconvenience this may cause.

 


OEM CUSTOMER NOTIFICATION

This Customer Notification is sent to you in accordance with the requirements of the United States National Traffic and Motor Vehicle Safety Act.

 

REASON FOR THIS RECALL

Lippert has conducted a thorough investigation and determined an issue which relates to motor vehicle safety may exist in certain vehicles equipped with a 6400 Series window vent produced by our Michigan facility which was formerly Hehr International. There is the possibility of the vent portion of the involved windows experiencing an issue with the window adhesive bonding. Our records indicate that your company purchased one or more of the involved 6400 series windows built between 10/01/2018 and 08/13/2020 which are the subject of this recall. The 6400 Series Vented Windows sold to you which are subject to the recall arc listed in detail in a spreadsheet included with this notice. If these products are still in your inventory, you must not sell or install these into units. It is a violation of federal law to sell any of the listed 6400 series windows covered by this recall until the defect is remedied. The window vent inspection instructions are enclosed with this letter.

 

WHAT WE WILL DO

Lippert will supply a gauge to be used while conducting inspections of the vent portion of the 6400 series windows (Recall Inspection Part Number 2021094575), as well as a replacement vent if the original vent is found to have an adhesive bond issue. Lippert will also reimburse you for 0.4 labor charged by your dealers to inspect the involved vented windows and/or replace any needed vent at the flat rate of 0.5 hour. The parts for the remedy are currently available.

 

WHAT YOU SHOULD DO

You or your dealer must inspect the involved component as outlined on the attached instructions and submit a claim documenting the completed repair for payment of the labor charges. Lippert’s Customer Service department may be reached via email at recall@lcil.com or via phone at 574-538-4514 if there are any questions. Lippert does not require advance contact or a pre-auth be obtained; labor allowance for this inspection is 0.4 and labor allowance for the repair is 0.5 with the original vent not required to be returned. Lippert will coordinate shipments of the needed inspection gauge as well as window vent with the RV Manufacturer.

If you are not satisfied, we have done our best to remedy this situation, you may submit a written complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590. You may call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

We regret any inconvenience this concern may cause you. As we are sure you will appreciate, the safety and quality of our products are of the utmost importance to us. Thank you for your attention and cooperation in this matter.

Sincerely,

Lippert Components, Inc.

 


HEHR 6400 SERIES WINDOW VENT RECALL

 

21E047 Hehr 6400 Series Windows Adhesive Failure

 


15 Affected Products

Vehicles

MAKE MODEL YEAR
RENEGADE CLASSIC 2018-2020
RENEGADE GARAGE 2018-2020
RENEGADE IKON 2018-2020
RENEGADE TOTERS 2018-2020
RENEGADE VIENNA 2018-2020

 


4 Associated Documents

Recall Acknowledgement

RCAK-21V644-4535.pdf 645.573KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.44 KB]

 


Defect Notice 573 Report

RCLRPT-21V644-2993.PDF 214.218KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.20 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V644-0454.pdf 7216.32KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [6.88 MB]

 


Recall Quarterly Report #1, 2021-3

RCLQRT-21V644-4552.PDF 211.113KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V644&docType=RCL

 


 

SaleBestseller No. 1
3M Auto Glass Urethane Windshield Adhesive, 08693, Medium Viscosity, High-Strength, Fast-Curing, 310 mL/10.5 fl oz Cartridge , Black
  • CURES RAPIDLY: Fast-curing adhesive produces rapid results
  • EASY AND CLEAN APPLICATION: Formulated as a medium viscosity and non-sag adhesive for easy and clean application
  • RAPIDLY PRODUCES HIGH BOND STRENGTH: High bond strength designed for windshield bonding and stationary glass attachment
  • MEET REQUIREMENTS: Adhesive properties meet many application demands and strength requirements
SaleBestseller No. 2
Auto Glass Sealant Windshield Urethane Glue Sikaflex P2G Primerless Adhesive x 2
  • 6 Hour SDAT
  • One Component
  • Short Cut-Off String
  • High Viscosity
  • This listing include 2 tube of Sikaflex P2g
SaleBestseller No. 3
Dow U-428 Plus Auto Glass Windshield Urethane Primer Less Adhesive Glue Sealant, 10 Tube
  • Primer less to glass
  • Fast curing
  • One-component and conventional-cure adhesives
Bestseller No. 4
[2 Pack] Polyurethane Windshield Adhesive with Fast Curing Formula - High Bond Strength Window Sealant Compound - Easy Automotive Glass Glue - Windshield Sealant Black - Vehicle & RV Polyurethane Glue
  • 2 Pack | Ultimate Bonding Strength –– A secure, permanent hold is one application away. This single-component glass repair glue sets the standard for optimal sealing and safety. This glass sealant meets the strength requirements set out by manufacturers for windshield replacement
  • Effortless Application –– Get the job done right the first time with this medium viscosity auto glass adhesive that can be loaded into any standard caulking gun. The non-sag properties ensure that the compound doesn't bleed for enhanced control
  • Rapid Results –– Add weather-resistant protection that lasts. Tackle your auto glass project today with this quick cure urethane adhesive compound. Use this windshield glue that delivers a secure hold that you can count on
  • For Every Auto Glass Project –– From convertibles to RVs, windshields to sidelights, this car window sealant has you covered. Suitable for interior or exterior use, apply this urethane window adhesive for any windshield or stationary glass attachment, including side and backlights
  • 2 Pack Complete Convenient Kit –– For professional mechanics to DIY enthusiasts, this set includes what you need to get the job done. This automotive glass adhesive kit comes with nitrile gloves for added personal protection and an application tip to make the process even easier
Bestseller No. 5
Polyurethane Windshield Adhesive with Fast Curing Formula - High Bond Strength Window Sealant Compound - Easy to Apply Automotive Glass Glue - Windshield Sealant Black - Vehicle & RV Polyurethane Glue
  • Ultimate Bonding Strength –– A secure, permanent hold is one application away. This single-component glass repair glue sets the standard for optimal sealing and safety. This glass sealant meets the strength requirements set out by manufacturers for windshield replacement
  • Effortless Application –– Get the job done right the first time with this medium viscosity auto glass adhesive that can be loaded into any standard caulking gun. The non-sag properties ensure that the compound doesn't bleed for enhanced control
  • Rapid Results –– Add weather-resistant protection that lasts. Tackle your auto glass project today with this quick cure urethane adhesive compound. Use this windshield glue that delivers a secure hold that you can count on
  • For Every Auto Glass Project –– From convertibles to RVs, windshields to sidelights, this car window sealant has you covered. Suitable for interior or exterior use, apply this urethane window adhesive for any windshield or stationary glass attachment, including side and backlights
  • Complete Convenient Kit –– For professional mechanics to DIY enthusiasts, this set includes what you need to get the job done. This automotive glass adhesive kit comes with nitrile gloves for added personal protection and an application tip to make the process even easier
Bestseller No. 6
2 Tube of DOW U-428 Plus Auto Glass Windshield Urethane Primerless Adhesive Glue Sealant
  • Primerless to glass
  • One-component, conventional-cure adhesives
  • Automotive Urethane, Adhesive
  • A Dow /Dupont Chemical OEM product For use on all auto glass installations
Bestseller No. 7
Akfix Urethane Windshield Adhesive Black (2x10.1 fl.oz.) - Fast Curing Car Window Sealant, High Bond Strength Auto Glass Sealant | 2 Pack
  • Enhanced Safety and Performance: Experience unmatched bonding strength with Akfix windshield sealant, ensuring high mechanical performance and vehicle integrity with every use. Perfect for professionals dedicated to precision and safety.
  • Fast and Efficient: Akfix windshield adhesive's fast-curing formula allows rapid strength development, minimizing downtime and accelerating workflow for automotive glass professionals.
  • Versatile and Durable: With good non-sag properties and cold application capability, Akfix windshield glue delivers reliable performance in any weather, proving ideal for a wide range of automotive glass bonding needs.
  • Seamless Application: Our one-component formulation and short cut-off string ensure a smooth, hassle-free application, making Akfix the go-to urethane windshield adhesive for a flawless finish that can be overpainted to match any vehicle.
  • Innovative Solution for Leak Prevention: Tackle windshield leaks head-on with Akfix windshield sealant for leaks, designed to provide a watertight seal that lasts, ensuring peace of mind for both technicians and vehicle owners.
Bestseller No. 8
Dow U-428 Plus Auto Glass Windshield Urethane Primer Less Adhesive Glue Sealant
  • Primer less to glass
  • Fast curing
  • One-component and conventional-cure adhesives
Bestseller No. 9
DURVOL Auto Glass Urethane Windshield Adhesive Sealant Pack of 1 Black
  • Easy to apply, one-component adhesive sealant requires no mixing, fast curing and high bond strength
  • Strong power offers a permanent bond, it's conventional-cure adhesive, strong bonds to auto glass to car bodies
  • Automotive urethane adhesive sealant, use on all auto glass installations
  • Has excellent weathering characteristics and is suitable for use in all climates
  • Tough, flexible bonds, retaining strong bonds even during vibration, swelling, or shocking
Bestseller No. 10
Dow Automotive-U-418 Beta Seal Glass Adhesive , Black
  • Rely on the moisture in the air to cure.
  • Application process is quick and easy
  • Minimal odor
  • Country of origin: United States

Last update on 2024-02-19 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...