| “This site contains affiliate links for which OEMDTC may be compensated” |
August 9, 2021 NHTSA CAMPAIGN NUMBER: 21V621000
A fresh water tank that detaches from the frame could increase the risk of a crash.
NHTSA Campaign Number: 21V621
Manufacturer Forest River, Inc.
Components EQUIPMENT
Potential Number of Units Affected 336
Summary
Forest River, Inc. (Forest River) is recalling certain 2019-2021 Salem, Wildwood and 2020-2021 Stealth EVO travel trailers. The fresh water tank may not be properly secured to the vehicle’s frame.
Remedy
Dealers will properly secure the holding tank, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact Forest River customer service at 1-503-831-5410. Forest River’s number for this recall is 22-1400.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Dear Forest River Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
WHAT IS THE DEFECT/NONCOMPLIANCE?
The fresh water tank may not be secured properly.
EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
If the tank comes loose from the frame this could cause property damage, personal injury or result in a crash.
WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?
Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest River completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.
WHAT SHOULD YOU DO?
Please contact your dealer immediately and request a service appointment to schedule the free remedy. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy.
You may also visit www.forestriverinc.com for dealer locations.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is .50 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.
WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?
If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following address:
Salem/Wildwood
Forest River, Inc.
Attn: WARRANTY MANAGER
1429 SouthEast Uglow
Dallas, OR 97338
RECALL 21V621, 2021-498 REMEDY INSTRUCTIONS
| Make(s): SALEM & WILDWOOD Model(s): Many Model Year(s): 2019 – 2021 |
Repair Code: RC-672-12-00-004086 Allotted Time: .25 HRS Inspection Code: RC-672-05-00-004085 Allotted Time: .25 HRS |
| Concern:
The fresh water tank may not be secured properly. |
Photo(s) Required: Yes Prior Authorization Required: Yes Part(s) Kit Number: N/A Part(s) Return: N/A |
Disconnect the vehicles’ battery Positive and Negative, disconnect any House battery(s) Positive and Negative, if equipped with a generator ensure it is off and lastly, ensure the vehicle is disconnected from shore power. Block any tires/wheels to prevent the vehicle from rolling. Failure to do so may result in electrocution, fire or other personal injury, property damage and/or death.
INSPECTION
STEP 1: LOCATE THE FRESH TANK DRAIN. IT WILL LOOK LIKE THIS. THE DRAIN LOCATION IDENTIFIES THE LOCATION OF THE FRESH TANK.
STEP 2: IN SOME MODELS YOU WILL HAVE ONE FOREST INSTALLED TANK BAR ON ONE SIDE OF THE TANK AND A CHASSIS TANK MOUNT ON THE OTHER. SOME MODELS WILL BE TWO TANK BARS, ONE ON EITHER SIDE OF THE TANK. IN EITHER CASE, A TANK BAR SHOULD BE INSTALLED WITH TWO SELF-TAPPING SCREWS COMING THROUGH THE I BEAMS ON BOTH ENDS OF THE TANK BAR. IF INSTALLED CORRECTLY, IT WILL LOOK LIKE THIS ON THE EXTERIOR OF THE I BEAMS. CHECK THE I BEAMS ON BOTH SIDES OF THE UNIT AND VERIFY BOTH ENDS OF EACH TANK BAR WERE SECURED WITH TWO SELF-TAPPING SCREWS AS SHOWN IN THE PICTURE. FOR THE MODELS WITH TWO INSTALLED TANK BARS (ONE ON EACH SIDE OF THE FRESH TANK) YOU WILL NEED TO VERIFY BOTH BARS ARE INSTALLED USING TWO SELF-TAPPING SCREWS ON EITHER END. IF YOU FIND ONE OR MORE OF THE SELF-TAPPING SCREWS ARE NOT INSTALLED, THE UNIT WILL NEED TO HAVE A REPAIR COMPLETED TO AVOID POSSIBLE FAILURE OF THE SECUREMENT.
STEP 3: IF ALL SELF-TAPPING SCREWS ARE PRESENT, VERIFY THE TANK IS EMPTY AND THEN SHAKE THE TANK BACK AND FORTH BETWEEN THE TANK BARS. IF THE TANK MOVES 3/8THS OF AN INCH OR MORE BACK AND FORTH BETWEEN THE TANK BARS, THE TANK BARS SHOULD BE RE-SECURED TIGHTER TO THE TANK TO AVOID EXCESS PLAY AND POSSIBLE FAILURE OF THE SECUREMENT.
STEP 4: IF ALL SELF-TAPPING SCREWS ARE FOUND TO BE PRESENT AND THE TANK DOES NOT HAVE EXCESS PLAY WHEN SHAKEN, THE INSPECTION IS COMPLETE AND NO REPAIR IS NEEDED.
REPAIR INSTRUCTIONS FOR MISSING SELF-TAPPING SCREWS AND OR EXCESS MOVEMENT
NOTE: FOR MODELS WITH UNDER BELLY MATERIAL INSTALLED, CUTTING ACCESS HOLES OR PARTIAL
REMOVAL OF THE UNDERBELLY WILL BE REQUIRED FOR A PROPER REPAIR TO THE UNIT. IF ACCESS IS GAINED VIA ACCESS HOLES, THE BELLY MUST BE PROPERLY REPAIRED WITH A PERMANENT, VISUALLY ACCEPTABLE REPAIR.
STEP 1: IF THE TANK BAR OR BARS ARE MISSING SELF TAPPING SCREWS WITH NO EXCESS MOVEMENT OF THE TANK: SELF-TAPPING SCREWS NEED TO BE ADDED FROM THE INSIDE OF THE I BEAM, TO THE EXISTING UNUSED HOLES IN THE TANK BAR FLANGES. ONCE ADDED, THE SECUREMENT SHOULD APPEAR SIMILAR TO THE PICTURES.
STEP 2: IF THE TANK HAS EXCESS MOVEMENT: REMOVE THE EXISTING SELF-TAPPERS FROM ONE TANK BAR SO THAT TANK BAR IS FREE TO BE REPOSITIONED TIGHTER TO THE TANK. PUSH THE TANK ITSELF, TIGHT INTO THE TANK BAR OR CHASSIS MOUNT THAT IS STILL SECURE. THEN SLIDE THE LOOSE TANK BAR UP TIGHT TO THE TANK. RE-SECURE THE TANK BAR MAKING SURE ALL REQUIRED SELF-TAPPING SCREWS ARE INSTALLED ON BOTH ENDS.
| Model year | Model | Unit item | USA |
| 2019 | Salem Towable | SMT167RB-OR | 1 |
| 2019 | Salem Towable | SMT171RBXL-OR | 11 |
| 2019 | Salem Towable | SMT177BH-OR | 10 |
| 2019 | Salem Towable | SMT181RT-OR | 2 |
| 2019 | Salem Towable | SMT201BHXL-OR | 24 |
| 2019 | Salem Towable | SMT210RBXL-OR | 10 |
| 2019 | Salem Towable | SMT220BHXL-OR | 4 |
| 2019 | Salem Towable | SMT230BHXL-OR | 6 |
| 2019 | Salem Towable | SMT233RBXL-OR | 16 |
| 2019 | Wildwood Towable | WDT167RB-OR | 1 |
| 2019 | Wildwood Towable | WDT170SS-OR | 1 |
| 2019 | Wildwood Towable | WDT177BH-OR | 15 |
| 2019 | Wildwood Towable | WDT201BHXL-OR | 8 |
| 2019 | Wildwood Towable | WDT210RBXL-OR | 5 |
| 2019 | Wildwood Towable | WDT220BHXL-OR | 1 |
| 2019 | Wildwood Towable | WDT230BHXL-OR | 10 |
| 2019 | Wildwood Towable | WDT233RBXL-OR | 14 |
| 2020 | Salem Towable | SMT177BH-OR | 7 |
| 2020 | Salem Towable | SMT201BHXL-OR | 13 |
| 2020 | Salem Towable | SMT230BHXL-OR | 5 |
| 2020 | Salem Towable | SMT233RBXL-OR | 9 |
| 2020 | Stealth Evo Towable | SJT177BQ-OR | 9 |
| 2020 | Stealth Evo Towable | SJT177FQ-OR | 9 |
| 2020 | Stealth Evo Towable | SJT178RT-OR | 7 |
| 2020 | Stealth Evo Towable | SJT179DB-OR | 15 |
| 2020 | Stealth Evo Towable | SJT180SS-OR | 11 |
| 2020 | Stealth Evo Towable | SJT2160RBX-OR | 7 |
| 2020 | Stealth Evo Towable | SJT2260BHX-OR | 2 |
| 2020 | Wildwood Towable | WDT177BH-OR | 2 |
| 2020 | Wildwood Towable | WDT201BHXL-OR | 3 |
| 2020 | Wildwood Towable | WDT230BHXL-OR | 9 |
| 2020 | Wildwood Towable | WDT233RBXL-OR | 12 |
| 2021 | Salem Towable | SMT177BH-OR | 10 |
| 2021 | Salem Towable | SMT233RBXL-OR | 3 |
| 2021 | Stealth Evo Towable | SJT177BQ-OR | 2 |
| 2021 | Stealth Evo Towable | SJT177FQ-OR | 6 |
| 2021 | Stealth Evo Towable | SJT178RT-OR | 4 |
| 2021 | Stealth Evo Towable | SJT179DB-OR | 20 |
| 2021 | Stealth Evo Towable | SJT180SS-OR | 9 |
| 2021 | Stealth Evo Towable | SJT2160RBX-OR | 9 |
| 2021 | Stealth Evo Towable | SJT2260BHX-OR | 4 |
| 2021 | Wildwood Towable | WDT178BHSK-OR | 1 |
| 2021 | Wildwood Towable | WDT220BHXL-OR | 1 |
| 2021 | Wildwood Towable | WDT233RBXL-OR | 8 |
| Grand Total | 336 |
SEOCONTENT-START
IMPORTANT SAFETY RECALL
Page 1 of 2
August 20, 2021
This Notice applies to your vehicle VIN listed above.
Dear Forest River Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
WHAT IS THE DEFECT/NONCOMPLIANCE?
The fresh water tank may not be secured properly.
EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
If the tank comes loose from the frame this could cause property damage, personal injury or result in a crash.
WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?
Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest River completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.
WHAT SHOULD YOU DO?
Please contact your dealer immediately and request a service appointment to schedule the free remedy. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy.
You may also visit www.forestriverinc.com for dealer locations.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is .50 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.
WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?
If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following address:
Salem/Wildwood
Forest River, Inc.
Attn: WARRANTY MANAGER
1429 SouthEast Uglow
Dallas, OR 97338
DEPARTMENT OF COMPLIANCE
VEHICLE SAFETY AND RECALL MANAGEMENT
BUILDING 11
423 N MAIN ST
MIDDLEBURY, INDIANA 46540-9218
NHTSA RECALL: 21V621
CANADA RECALL: 2021-498
FR ID: 22-1400
<>
<>
<
<>, <> <>
O Integrity
O Safety
O Quality
O Customer Service
IMPORTANT SAFETY RECALL
Page 2 of 2
What if you no longer own this vehicle?
If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner within 10 working days after the day in which the notice is received. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.
PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.
MAY FOREST RIVER ASSIST YOU FURTHER?
If you have difficulties getting your vehicle repaired, please contact your Forest River Representative listed below:
CONTACT
PHONE
CUSTOMER SERVICE
(503) 831-5413
If you are still having difficulty getting your vehicle repaired in a reasonable amount of time or without charge, you may write to the following address:
For Canadian Owners Please Contact:
Head of Recalls
Motor Vehicle Safety Investigations Laboratory
Transport Canada
80 Noël street, Gatineau, Quebec, J8Z 0A1
Telephone (800) 333-0510
Facsimile (819) 420-4292
Recall ID: 2021-498
For US Owners Please Contact:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590
Or you may call the toll free Vehicle Safety Hotline at 1-888-327-4236 or (TTY: 1-800-424-9153).
Or visit www.safercar.gov and search;
Recall ID: 21V621**************************************************************************************************************IMPORTANT SAFETY RECALL
Page 1 of 2
August 2021
Pursuant to USC49CFR §577.13 – Notification to Dealerships and Distributors – Paragraph B
“It is a violation of Federal Law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by the notification under a sale or lease until the defect or noncompliance is remedied. Substantial civil penalties apply to violations of this law.”
–Forest River motorized and towable products are contained in this section-
CANADA: Pursuant to the Canadian Motor Vehicle Safety Act, section 5
Companies who sell new non-complying vehicles may be in violation of the Motor Vehicle Safety Act. Substantial penalties apply to violations of this law. This notice is being sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
Forest River – Office of Corporate Compliance (“OCC”) has decided that a safety defect exists in certain 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer recreational vehicles. Forest River is recalling the defect model(s) to ensure the safety of our future retail consumers and your dealership. Forest River apologizes for any inconvenience this action may cause your dealership; however, safety continued satisfaction and our commitment to building great products are of the utmost importance to Forest River.
The identified VIN referenced in the attached document(s).
The designated Date range of production is
Salem 6/29/2018 – 8/6/2020
Wildwood 7/20/2018 – 8/20/2020
Stealth EVO 10/9/2019 – 8/25/2020
DEFECT/NONCOMPLIANCE:
The fresh water tank may not be secured properly.
EVALUATION OF RISK:
If the tank comes loose from the frame this could cause property damage, personal injury or result in a crash.
SERVICE PROCEDURE:
Dealership Service Department Service procedures for addressing the tank securement is located on Dealer Connect.
Pictures are required for the remedy and/or inspection after installation. Pictures of the remedy are a condition of payment in which must be provided with a claim against the repair code(s).
DEALER REPAIR CODES: Dealer Connect
UNITED
STATES
CANADA
REPAIR
CODE
DESCRIPTION
ALLOWABLE HOUR(S)
21V621
2021-498
RC-672-05-00-004085
INSPECTION FOR TANK BRACKETS
.25
21V621
2021-498
RC-672-12-00-004086
REPAIR FOR TANK BRACKETS
.25
HELPFUL CONTACT INFORMATION:
CONTACT
PHONE
CUSTOMER SERVICE
(503) 831-5413
DEPARTMENT OF COMPLIANCE
VEHICLE SAFETY AND RECALL MANAGEMENT
BUILDING 11
423 N MAIN ST
MIDDLEBURY, INDIANA 46540-9218
NHTSA RECALL: 21V621
CANADA RECALL: 2021-498
FR ID: 22-1400
<>
< >
<>, <> <>
O Integrity
O Safety
O Quality
O Customer Service
IMPORTANT SAFETY RECALL
Page 2 of 2
The Recall shall be considered the utmost priority to remedy the 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer in question. The retail consumer shall not be charged any amount of monies for remedy to their 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer listed under this Recall.
If your dealership has already performed the remedy to 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer, your dealership is entitled to the reimbursement as stated above by filing a claim using the indicated repair code(s). If the remedy needs to be performed on an out of warranty 2019 – 2021 Salem, 2019 – 2021 Wildwood Travel Trailers and 2020 – 2021 Stealth EVO Travel Trailer in which the VIN falls under as stated in the identified VIN listing, your dealership is entitled to the reimbursement as stated above by filing a claim using the indicated repair code(s).
Notice:
In no manner shall a Forest River Product Owner or Coachmen Product Owner be charged any fee(s) for scheduling, conduction or completion of the recall. Additionally, all dealership(s) that are Forest River and/or Coachmen dealership(s) are Federally Mandated to perform the recall once presented with this recall whether by the Owner or Dealership receipt of this letter, without denial of service to the Owner. Lastly, denial of a remedy for this recall is a Federal Violation punishable by law resulting substantial fines and/or civil penalties.
Federal Regulation requires that any lessor receiving this Recall must forward a copy of this notice to the lessee within ten days. If your dealership no longer owns this vehicle, please inform the Warranty Manager of the product listed above of the change of ownership.***************************************************************************************************************
*
*
*
*
*
*
*
***************************************************************************************
8 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FOREST RIVER | SALEM | 2019-2021 |
| FOREST RIVER | STEALTH EVO | 2020-2021 |
| FOREST RIVER | WILDWOOD | 2019-2021 |
10 Associated Documents
Remedy Instructions and TSB
RCRIT-21V621-8177.pdf 286.631KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #1, 2021-3
RCLQRT-21V621-0114.PDF 211.125KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-21V621-4243.pdf 210.514KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-21V621-9957.pdf 220.108KB
Loading...
Defect Notice 573 Report
RCLRPT-21V621-4117.PDF 216.154KB
Loading...
Recall Acknowledgement
RCAK-21V621-5527.pdf 645.755KB
Loading...
Defect Notice 573 Report
RCLRPT-21V621-1931.PDF 216.154KB
Loading...
Miscellaneous Document – Model Listing
RMISC-21V621-1249.pdf 103.613KB
Loading...
Recall Quarterly Report #2, 2021-4
RCLQRT-21V621-8700.PDF 211.227KB
Loading...
Recall Quarterly Report #3, 2022-1
RCLQRT-21V621-6916.PDF 211.309KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V621&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- This 16 gallon water tank measures 24" x 15" x 10" (not including fittings)
- These rotational molded fresh water tanks are made from a high quality durable polyethylene material.
- One piece seamless construction - No Seams to burst
- All tanks come with (1) 1.25" water fill inlet and (3) 3/8" NPT connections. Non-Pressurized Tank - The tank must be vented
- Stain, corrosion and rust resistant features make them ideal for replacement or OEM installation on RVs, horse trailers or marine products.
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 65 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 33 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 36” Longest Length (not including fittings) x 12” x 17.75” Average thickness 7/32” +/- (+/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 75 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 50.5” Longest Length (not including fittings) x 17.5” x 19.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 16 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 26” Longest Length (not including fittings) x 9” x 16” ” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 42 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage
- WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (THREE) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank prior to use to remove any debris, scuffs or marking from the manufacturing process.
- 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement)
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process.
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose
- classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX AMPS 8.0A SHUT OFF PRESSURE 45PSI/3.1 Bar ON-DEMAND PUMP only turns on when senses pressure changes in line 12 VOLT POWER ONLY 110/115/220 volt will damage the unit - READ INSTRUCTION BOOKLER BEFORE INSTALLATION
Last update on 2024-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.