2019-2020 Freightliner Sprinter NV3LETULPX Hydraulic Power Steering Hoses May Detach

“This site contains affiliate links for which OEMDTC may be compensated”

April 6, 2021 NHTSA CAMPAIGN NUMBER: 21V241000

Hydraulic Power Steering Hoses May Detach

A hydraulic fluid leak may cause a sudden loss of power steering assist, increasing the risk of a crash.

 

NHTSA Campaign Number: 21V241

Manufacturer Daimler Vans USA, LLC

Components STEERING

Potential Number of Units Affected 4,444

 

Summary

Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The hydraulic power steering return line hoses may detach and cause hydraulic fluid to leak.

 

Remedy

DVUSA will notify owners, and dealers will install a screw-type clamp, free of charge. Owner notification letters were mailed on May 28, 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA’s number for this recall is NV3LETULPX.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Daimler Vans Recalls

 


 

TO:  Freightliner Principals, General Managers, Sales Managers, Service Managers, Parts Managers FROM: Anthony Washington, Department Manager, Regulations and Certifications
Re:  Launch Recall Campaign Notification
Model 907 (Sprinter)
Model Years 2019-2020
Inspect Power Steering Hose Clamps
DATE:  May, 2021

 

IMPORTANT RECALL CAMPAIGN INFORMATION

 

Please see the attached documents related to the campaign listed above

 

 


Campaign No. : Campaign Desc. : Inspect Power Steering Hose Clamps
2021050003 NV3LETULPX
This is to notify you of a Launch Recall Campaign concerning the inspection of the power steering hose clamps on approximately 82 MY19-20 Freightliner Sprinter vans.  The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers.  All affected VINs will be flagged as “OPEN” in VMI and cannot be sold.
Background
Issue Mercedes-Benz AG (“MBAG”), the manufacturer of Freightliner vans, has determined that on certain Freightliner Sprinter vehicles with 907 (VS30) platforms, the hydraulic power steering return line hoses might detach at their connection points under certain operating conditions, which may cause hydraulic fluid to leak, resulting in the loss of power steering assist. If the hydraulic power steering hose detaches, the driver will still have manual steering functionality, but increased steering effort is needed, particularly at low speeds. Sudden loss of power steering as well as the loss of hydraulic steering fluid to the road surface could increase the risk of a crash.
What We’re Doing DVUSA is conducting a voluntary recall. An authorized Freightliner dealer will check the return line connections of the power steering system and if needed, install the respective new replacement clamp.
Parts Part is Available

 

Vehicles Affected
Vehicle Model Year(s) Model Year 2019-2020
Vehicle Model Sprinter VS30, Platform 907
Vehicle Populations
Total Recall 82
Dealer Inventory 1
Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired.

 

Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired.

 

Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new Sprinter vehicles covered by this notification until the vehicle has been repaired.

 

Next Steps/Notes
Customer Notification Timeline An owner notification letter to be mailed in End of May, 2021.
AOMS/SOMS AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP.
Rental Fleet Partners This recall may affect vehicles in your fleet. Please contact your respective DVUSA fleet representative for further information and next steps. For repairs, please contact your preferred DVUSA dealer.
While we regret any inconvenience this may cause, we are determined to maintain a high level of vehicle quality and customer satisfaction.

 


 

Campaign No. 2021050003, May, 2021

 

TO: ALL MERCEDES-BENZ & FREIGHTLINER CENTERS
SUBJECT: Model 907 Sprinter, Model Year 2019-2020
Inspect Power Steering Hose Clamps

 

Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz and Freightliner vans, has determined that on certain Mercedes-Benz and Freightliner Sprinter vehicles from platform 907 (VS30) , the hydraulic power steering return line hoses may detach at their connection points under certain operating conditions and may cause hydraulic fluid to leak resulting in the loss of power steering. If the hydraulic power steering hose detaches, the driver will still have manual steering functionality, but increased steering effort is needed, particularly at low speeds. Sudden loss of power steering as well as the loss of hydraulic steering liquid to the road surface may increase the risk of a crash. An authorized Mercedes-Benz or Freightliner Sprinter dealer will check the return line connections of the power steering system and if needed, install the respective replacement clamp.

 

Prior to performing this Recall Campaign:

  • Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
  • Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.

 

Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

 

Approximately 4,444 vehicles are involved.

Order No. V-RC-2021050003

This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records.

 


Model 906 with engine 642, 651

Model 907 with engine 642, 651 with code ZG1 (Engageable all-wheel drive)

Model 907 with engine 642, 651

with code ZG3 (Engageable all-wheel drive with gear reduction)

Operation no. of the operation texts or standard texts and flat rates

Category Op. no. Operation text Time Damage Code Code
L 02 1352 Operations: Check hydraulic lines of power steering 0.2hrs 46 950 80 NV3LETULP X
L 02 1359 Operations: Replace one hose clamp on power steering oil cooler (after check) 0.2hrs 46 950 80 NV3LETULP X
L 02 1355 Operations: Replace 2 hose clamps on power steering oil cooler (after check) 0.2hrs 46 950 80 NV3LETULP X
L 02 1354 Operation: Correct position of hose clamp on power steering expansion reservoir (after check) 0.2hrs 46 950 80 NV3LETULP X

 

The following test and operation steps are shown on a vehicle with engine 651 and must be performed in the same way on vehicles with engine 642.

All 3 clamps (1, 2, 4) together with the listed connections must always be checked.

On vehicles with engine 642, the as-built configuration may deviate slightly (see first picture), which does not impair the procedure shown here.

 

D46.25-A008-79

 

Shown on model 906

Shown on model 906
1 Clip
2 Clip
3 Return hose
4 Clip
5 Low-pressure hose
8 Air ducting
a Dimension (2 to 4 mm)

1 Clip
2 Clip
3 Return hose
5 Low-pressure hose
b Dimension (2 to 7 mm)

 

Warning Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid. Depressurize hydraulic system completely before starting any work on it. Wear protective clothing and safety glasses. AS00.00-Z-0013-01A
Warning Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
Notice Notes on avoiding damage through contamination and foreign objects AH00.00-P-5000-01A

 

Check
1 Check, whether the vehicle is affected by the measure. Affected vehicles: Check hydraulic hoses of power steering (code: NV3LETULPX, acc. no.: 46 950 80)

Model 906.### ## as of 90634 up to 774547 with engine 642, 651

SM46.25-D-0032-01AAA
Affected vehicles: Check hydraulic hoses of power steering (code: NV3LETULPX, acc. no.: 46 950 80)

Model 907.### ## as of 000231 up to 390764 with engine 642, 651 with code ZG1 (Engageable allwheel drive)

Model 907.### ## as of 000231 up to 390764 with engine 642, 651 with code ZG3 (Engageable allwheel drive with gear reduction)

 

For authorized Mercedes‑Benz service partners, only the entry in the Extended VEGA Application (EVA) system, in the “Current” tab, is decisive. An additional test of the affected vehicles in the workshop information system (WIS) or vehicle list is thereby not necessary.

SM46.25-D-0032-01AAB
2 Remove air ducting (8).
3 Check hydraulic hoses and clamps (1, 2) of power steering.  

Check the following points:

→ Check both connections of hydraulic lines for leak tightness.

→ Check installation position of clamps (1, 2) on respective hydraulic hose. The clamps must be seated centrally between the markings (arrows) on the hoses. Also check whether the distance indicated by dimension (b) is maintained. See specification in picture.

If clamps (1, 2) are not correctly positioned or if there is a leakage (see fail image above),

replace affected clamp (1, 2). To do so, see operation step 5 onward in reference document. Replace clamps on hydraulic hoses of power steering (code: NV3LETULPX, acc. no.: 46 950 80)

SM46.25-D-0032-02SG

 

4 Check return hose (3) and clamp (4) at power steering expansion reservoir.  

Check the following points:

→ Check connection of return hose (3) at power steering expansion reservoir for leak tightness.

→ Check whether return hose (3) is pushed on power steering expansion reservoir up to end stop.

→ Check installation position of clamp (4) on power steering expansion reservoir. The clamp (4) must be seated centrally between the markings (arrows) on the return hose (3). See specification in picture. If markings (arrows) are no longer visible, then check distance against dimension (a).

If clamp (4) is not positioned correctly or if a leakage is present,

reposition affected clamp (4). To do so, see operation steps 1 to 4 in reference document.

Replace clamps on hydraulic hoses of power steering (code: NV3LETULPX, acc. no.: 46 950 80)

If all specifications and test criteria of operation steps 3 and 4 are fulfilled,

install air ducting (8) and end measure.

SM46.25-D-0032-02SG
Concluding work
5 Clean integral carrier and surrounding component parts.  

Only required if hydraulic fluid has dripped down onto the integral carrier and surrounding component parts. Use cleaner.

Assembly cleaner

BR00.45-Z-1028-04A
Warning Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. AS00.00-Z-0005-01A
6 Fill hydraulic power steering and bleed. If a clamp (1, 2) was replaced.
Model 906 with engine 642, 651 AR46.30-S-0010S
Model 907 with engine 642, 651 AR46.25-D-3300-02TSX
Steering gear oil BF46.00-N-1001-01A
7 Install air ducting (8).

 

Steering

Number Designation Model 906 Model 907 with code ZG1 (Engageable all-wheel drive) or with code ZG3 (Engageable all-wheel drive with gear reduction)
BF46.00-N-1001-01A Steering gear oil Filling capacity Liter ≈1,0 ≈1,0
Sheet BB00.40-

P-0236-03A

BB00.40-

P-0236-03A

 

Repair materials

Number Designation Order number
BR00.45-Z-1028-04A Assembly cleaner A 000 986 56 01

 

Parts ordering note

Part no. Designation Quantity
N 000000 000665

*no substitution allowed

Clamp (low-pressure hose to oil cooler hydraulic line / return hose to oil cooler hydraulic line) n. B.

 

V-RC-2021050003

 



18 Affected Products

Vehicles

MAKE MODEL YEAR
FREIGHTLINER SPRINTER (VS30) 2019
FREIGHTLINER SPRINTER 1500 2019-2020
FREIGHTLINER SPRINTER 2500 2019-2020
FREIGHTLINER SPRINTER 3500 2019-2020
FREIGHTLINER SPRINTER 4500 2019-2020
MERCEDES-BENZ SPRINTER (VS30) 2019
MERCEDES-BENZ SPRINTER 1500 2019-2020
MERCEDES-BENZ SPRINTER 2500 2019-2020
MERCEDES-BENZ SPRINTER 3500 2019-2020
MERCEDES-BENZ SPRINTER 4500 2019-2020

 


11 Associated Documents

Defect Notice 573 Report

RCLRPT-21V241-3306.PDF 214.173KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.15 KB]

 


Recall Acknowledgement

RCAK-21V241-9658.pdf 645.676KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.54 KB]

 


Recall Quarterly Report #1, 2021-2

RCLQRT-21V241-3100.PDF 211.144KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Owner Notification Letter(Part 577)

RCONL-21V241-8526.pdf 181.14KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [176.89 KB]

 


Owner Notification Letter(Part 577)

RCONL-21V241-4738.pdf 202.196KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [197.46 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V241-2022.pdf 707.833KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [691.24 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V241-0661.pdf 637.159KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [622.23 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V241-7446.pdf 1466.467KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.40 MB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V241-3266.pdf 1469.185KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.40 MB]

 


Recall Quarterly Report #3, 2021-4

RCLQRT-21V241-1111.PDF 211.336KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


Recall Quarterly Report #2, 2021-3

RCLQRT-21V241-0081.PDF 211.246KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V241&docType=RCL

 


 

Bestseller No. 1
Lucas Oil 10008 Power Steering Fluid - 1 Quart
  • Package Dimensions: 23.2 H x 6.9 L x 11.2 W (centimetres)
  • Package Weight: 0.9 kilograms
  • Country of Origin : United States
  • Fit type: Universal
Bestseller No. 2
Johnsen's 4611 Power Steering Fluid - 1 Gallon
  • High quality power steering fluid and conditioner
  • Stops Noise
  • Stops slipping
  • Helps prevent unusual wear
  • Protects seals
Bestseller No. 3
Bar's Leaks High Mileage Power Steering Repair, 16 oz.
  • REDUCES NOISE AND SMOOTHES OUT HARD STEERING: A unique dual cavity bottle containing a combination of the best performance additives to repair the most common power steering fluid related problems.
  • STOPS LEAKS AND RECONDITIONS RACK & PINION: Power Steering Repair can be used to top-off the existing fluid when low, or add a bottle when changing fluid.
  • RESTORES PREFORMANCE: Works on all vehicles, domestic and import.
  • ADDS PROTECTION: Compatible with ALL types of power steering fluid or ATF, including petroleum, mineral oil and synthetic formulas.
Bestseller No. 4
Lubegard 23232 Complete Synthetic Power Steering Fluid, 32 fl. oz.
  • The service solution for ALL European, North American, and Asian vehicles (Honda fluid recommended for Honda/Acura vehicles)
  • Reduces friction and protects seals and hoses - extending the life of the power steering system
  • Provides excellent cold and high temperature performance eliminating "morning sickness" stiffness
  • Excellent for use in electric hydraulic systems
  • Cleans and frees sticky turbines and pumps
Bestseller No. 5
Prestone AS262 Power Steering Fluid with Stop Leak - 12 oz.
  • Keeps power-steering systems running smoothly and helps stop or reduce fluid loss caused by leaky seals
  • Formulated with high-quality oil and fortified with additives to revitalize dried, shrunken, and hardened seals
  • Developed for use in GM, Ford, Chrysler, and most foreign cars and light trucks
  • Anti-wear agents protect pump components
  • Corrosion inhibitors to protect metal components
SaleBestseller No. 6
Lubegard 24242 Complete Synthetic Honda Power Steering Fluid, 32 fl. oz.
  • For 2007 and up Honda and Acura vehicles, Backwards compatible with older Honda and Acura vehicles
  • Lubricates and reduces wear in the pump, Prevents rust of the steel parts
  • Lubricates and fights wear on the gear faces of the turning mechanism (eg. Rack and pinion)
  • Protects and cleans the seals and hoses
  • Contains no seal swellers
Bestseller No. 7
Prestone AS269 Power Steering Fluid for Asian Vehicles - 12 oz.
  • Premium full-synthetic formulation specifically engineered for Asian vehicles
  • Provides protection against wear, foaming, and corrosion to maintain optimal performance
  • Designed for extreme temperatures while also providing excellent operation in low temperatures
  • Delivers excellent oxidative stability for extended fluid life
  • Engineered for Honda, Acura, Toyota, Lexus, and all other Asian-manufactured vehicles
SaleBestseller No. 8
Bar's Leaks 1630 Power Steering Stop Leak - 11 oz,Grey
  • 1 bottle treats 4 to 5 quarts of oil
  • Stops and seals steering fluid leaks
  • Works with all types of power steering leaks
  • Part number: 1630
Bestseller No. 9
Lucas Oil 10011 Power Steering Stop Leak - 1 Quart
  • Formulated with a blend of special oils and petroleum-extracted additives
  • Solvent-free formula
  • Excellent preventative maintenance for new power steering units
  • Renews and conditions worn seals
  • Compatible with all power steering fluids
Bestseller No. 10
Honda 08206-9002PE Power Steering Fluid Pack of 3
  • Suitable for all Honda models
  • Honda genuine power steering fluid is manufactured for all Honda vehicle power steering systems
  • Other manufacturer's power steering fluid may damage the Honda power steering system
  • Genuine OEM Honda Parts

Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...