“This site contains affiliate links for which OEMDTC may be compensated” |
March 31, 2021 NHTSA CAMPAIGN NUMBER: 21V225000
A loss of both headlight beams can reduce visibility and increase the risk of a crash.
NHTSA Campaign Number: 21V225
Manufacturer Harley-Davidson Motor Company
Components EXTERIOR LIGHTING
Potential Number of Units Affected 31,346
Summary
Harley-Davidson Motor Company (Harley-Davidson) is recalling certain 2019-2021 Sportster (XL) motorcycles and 796 headlight assemblies that may have been sold as replacement parts for 2005-2019 Sportster, 2005-2017 Softail, 2005-2017 Dyna, and 2005-2011 V-Rod motorcycles. The glass bulb within the headlight assembly may fail, causing a loss of both high and low beams.
Remedy
Harley-Davidson will notify owners, and dealers will install a headlamp bulb shield, free of charge. The recall began April 15, 2021. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson’s number for this recall is 0177.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Harley-Davidson Recalls
M1524
2021-04-08
M1524: RECALL 0177 – 2019 – 2021 SPORTSTER – HEADLAMP
Purpose for Service Bulletin
Harley-Davidson has learned the headlamp assembly (Part No. 68297-05A), used in 2019-2021 Sportsters® as seen in Table 1 may have a shorter life than expected. These configurations of vehicles built between February 1, 2019 and March 23, 2021 may develop a hole in the headlamp bulb tip due to thermal conditions caused by having a glossy, chrome finish on the interior of the bulb shield. This results in the sealed gas escaping and the powered filament failing prematurely. Switching to a different beam to restore lighting will then cause the second filament to fail.
A loss of both headlamp beams in succession may increase the risk of a crash.
NOTE
The new bulb shield has a matte interior finish.
Motorcycles Affected
Table 1.
Platform | Year | Model |
Sportster | 2019 | XL883L, XL883N, XL1200C, XL1200CX, XL1200X, XL1200XS, XL1200NS |
2020 | XL883N, XL1200CX, XL1200X, XL1200NS | |
2021 | XL883N, XL1200X, XL1200NS |
Other vehicles not included in the recall population may have received a potentially affected headlamp assembly (68297-05A) as a replacement service part. 2005-2019 Sportsters, 2005-2017 Softails®, 2005-2017 Dynas® and 2005-2011 V-Rods® that had a replacement assembly installed between February 1, 2019 and April 6, 2021 are also covered for recall replacement as an SNV claim type.
Markets Affected
Domestic (DOM) and Canadian markets.
Part Numbers
Recall Bulb Shield Kit
Table 3. Kit Number
Part No. | Item Description |
68297-05A | Headlamp Assembly |
Recall Bulb Shield Kit
Table 3. Kit Number
Kit No. | Item Description |
91500107 | Kit, Recall, Bulb, Headlamp |
Kit Ordering Information
A single wave shipment containing 5 kits per dealer will start shipping the week of April 12, 2021.
After the five kits are depleted use the standard order system covered in M1483.
Required Dealer Action
- Verify that vehicle is part of recall 0177.
- H-Dnet.com > FAVORITES > MY TOOLBOX > Vehicle Information. Then enter the Vehicle
Identification Number (VIN) of the vehicle in question.
Remove
Visor Equipped Vehicles
- See Figure 1. loosen bracket screws (2).
- See Figure 2. Remove bracket to visor screws (2) and washers (3).
- Remove visor (1).
All Vehicles
- Remove bulb. See the service manual.
Bulb Shield
- See Figure 3. Remove screw (3).
- Remove bulb shield (2).
Install
New Bulb Shield
NOTE
Do not touch or get oils on the bulb or new bulb shield (2). Clean gloves are recommended.
- See Figure 3. Position bulb shield (2).
- Apply threadlocker to threads of screw (3).
Consumable: LOCTITE 243 MEDIUM STRENGTH THREADLOCKER AND SEALANT (BLUE) (99642-97)
NOTE
Due to the reuse of the self-tapping screw, do not exceed recommended torque.
- Install screw (3). Tighten.
Torque: 5.8–6 in-lbs (0.66–0.68 N·m)
All Vehicles
- Install bulb. See the service manual.
Visor Equipped Vehicles
- See Figure 2. Position visor (1).
- Install bracket to visor washers (3) and screws (2). Tighten. Torque: 35–44 in-lbs (4–5 N·m)
- See Figure 1. Hand tighten visor bracket screws (2).
- Align visor to the rim of the headlamp assembly.
- Tighten visor bracket screws. Torque: 10–16 ft-lbs (13.5–21.6 N·m)
Supplemental Procedure Video
Always review the appropriate service procedure prior to performing it. This video is intended to supplement, not replace, documented service procedures. Attempting service procedures without the proper training, tools, equipment, and manuals could result in death or injury to you or others. This could also damage the motorcycle or cause the motorcycle to operate improperly. (10406a)
This video is a supplement of the procedure covered in the document. This video can only be viewed through Service Information Portal (SIP).
Dealer Inventory Instructions
Make the repairs as stated in the Required Dealer Action : Bulb Shield.
File a warranty claim per Table 5 or Table 7.
Credit Procedure
NOTE
Enter bulletin and recall number into comment section of claim.
U.S. Market
On Vehicle Bulb Shield Repair – US Market
Submit a warranty claim per Table 4 for all on vehicle bulb shield repair.
Table 4. On Vehicle Bulb Shield Repair – US Market
ITEM | DATA |
Claim Type | SRC |
Problem Part Number | 68297-05A |
Quantity | Leave Blank |
Primary Labor Code | 2824 |
Time | 0.2 h |
Customer Concern Code | 0177 |
Condition Code | 9981 |
Replacement Part No. | 91500107 |
Quantity | 1 |
Upon submission of the properly completed claim, dealers are credited 0.2 h of labor time for performing the procedure. Submit campaign events on their own warranty claim. Do not mix claims with other warranty events.
Inventory Bulb Shield Repair – US Market
Submit a warranty claim per Table 5 for all in-stock inventory bulb shield repair.
Table 5. Inventory Bulb Shield Repair – US Market
ITEM | DATA |
Claim Type | SNV |
Problem Part Number | 68297-05A |
Quantity | Leave Blank |
Primary Labor Code | Leave Blank |
Event Detail Labor Code | 8888 |
Time | 0.1 h |
Customer Concern Code | 0177 |
Condition Code | 9982 |
Replacement Part No. | 91500107 |
Quantity | 1 |
Upon submission of the properly completed claim, dealers are credited 0.1 h of labor time for performing the procedure. Submit campaign events on their own warranty claim. Do not mix claims with other warranty events.
Canadian Market
On Vehicle Bulb Shield Repair – Canadian Market
Submit a warranty claim per Table 6 for all on vehicle bulb shield repair.
Table 6. On Vehicle Bulb Shield Repair – Canadian Market
ITEM | DATA |
Claim Type | SRC |
Problem Part Number | 68297-05A |
Quantity | Leave Blank |
Primary Labor Code | 2828 |
Time | 0.2 h |
Customer Concern Code | 0177 |
Condition Code | 9983 |
Upon submission of the properly completed claim, dealers are credited 0.2 h of labor time for performing the procedure, plus appropriate administrative time. Submit campaign events on their own warranty claim. Do not mix claims with other warranty events.
Inventory Bulb Shield Repair – Canadian Market
Submit a warranty claim per Table 7 for all in-stock inventory bulb shield repair.
Table 7. Inventory Bulb Shield Repair – Canadian Market
ITEM | DATA |
Claim Type | SNV |
Problem Part Number | 68297-05A |
Quantity | Leave Blank |
Primary Labor Code | Leave Blank |
Event Detail Labor Code | 8888 |
Time | 0.1 h |
Customer Concern Code | 0177 |
Condition Code | 9984 |
Upon submission of the properly completed claim, dealers are credited 0.1 h of labor time for performing the procedure, plus appropriate administrative time. Submit campaign events on their own warranty claim. Do not mix claims with other warranty events.
Return Parts
Dealer may be requested to ship the part back to Harley-Davidson, if the part is not requested follow the direction below.
Hold all claimed parts for 60 d from date of credit issued for possible field inspection and/or request to return to factory. After 60 d, destroy and discard the parts.
IMPORTANT SAFETY RECALL
Owner Notification
This notice applies to your vehicle, VIN #
April 15, 2021
Harley-Davidson Recall No. 0177
NHTSA Recall No. 21V225
Dear Harley-Davidson® Motorcycle Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Harley-Davidson Motor Company, Inc. has decided that a defect which relates to motor vehicle safety exists on certain model year 2019 – 2021 Sportster (XL) models (see model list below). We are notifying you because our records indicate that you may own one of these motorcycles.
What is the Issue?
High-heat conditions caused by having a glossy, chrome finish on the interior of the bulb shield in the headlamp assembly may cause a hole to develop in the tip of the dual-filament bulb. This hole may allow the sealed gas to escape from the bulb, which can cause the powered filament to fail prematurely. Investigation of this issue indicates that switching to a different beam (high to low or low to high) to restore lighting causes the second filament to fail. A loss of both high and low headlamp beams in succession may reduce visibility and increase the risk of a crash.
What Should You Do?
Recall kits that include a new headlamp bulb shield will be available beginning the week of April 12. To schedule an appointment to have your motorcycle repaired, contact your Harley-Davidson dealer. The repair will be performed at no cost to you and should take less than one hour. However, due to scheduling, the dealer may require your motorcycle for a longer period. Once the service has been completed, your dealer will ask you to sign a recall claim.
IMPORTANT: If you choose to ride your motorcycle before this safety recall service has been completed, to reduce the risk associated with this condition, we recommend that you check for proper headlamp function before every ride. Note: If the Security Lamp in the speedometer remains continuously lit, this could be an indication that one or both headlamp filaments has failed. If you experience a filament failure (high or low) during a ride, you may switch to the other filament, but be advised that if the recall condition exists on your motorcycle, the second filament will fail within 10 minutes or less.
If you have sold your motorcycle and have an address for the current owner, it is important that you forward this notice to the new owner. Alternatively, you may contact us at the Harley- Davidson phone numbers listed below and provide us with the new contact information so that we may notify the new owner of this recall. Also, federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.
What If You Have Additional Questions or Concerns?
If you previously paid to remedy the specific condition that is the subject of this recall, you may be eligible for reimbursement. For more information regarding eligibility, or if you take your motorcycle to your dealer on a mutually agreed upon date and they are unable to perform the required service to your satisfaction, please contact Harley-Davidson Motor Company, Inc. for immediate assistance at 1-800-258-2464 in the U.S. or 1-414-343-4056 world-wide.
If you are still having difficulty getting your vehicle serviced in a reasonable time, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY:1-800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this may cause you, but we are initiating this action in the interest of your personal safety and satisfaction with our products. Thank you for your cooperation.
Sincerely,
Harley-Davidson Motor Company, Inc. Recall 0177
Model Year List (production date range: 02/01/19 to 03/23/21)
Year | Models |
2019 | XL883L, XL883N, XL1200C, XL1200CX, XL1200X, XL1200XS, XL1200NS |
2020 | XL883N, XL1200CX, XL1200X, XL1200NS |
2021 | XL883N, XL1200X, XL1200NS |
IMPORTANT SAFETY RECALL INFORMATION
Safety Recall Campaign 0177 – XL Headlamp Bulb Shield
SUMMARY
- Harley-Davidson Motor Company, Inc. has decided that a defect which relates to motor vehicle safety exists on certain model year 2019 – 2021 Sportster (XL) models built between 02/01/2019 and 03/23/2021 in the DOM, CAL, and CAN configurations.
- A hole may develop in the tip of the dual-filament bulb in the headlamp assembly, part number 68297-05A. This hole may allow the sealed gas to escape from the bulb, thereby causing the powered filament to fail prematurely. Switching to a different beam (high to low or low to high) to restore lighting causes the second filament to fail. A loss of both high and low headlamp beams in succession during nighttime riding may increase the risk of a crash.
KEY DATES
- On or about 4/08/2021: Service Bulletin posts
- On or about 4/12/2021: Recall kits begin shipping
- On or about 4/15/2021: Owner notification letters begin mailing
CONTACT
- U.S. dealers: Call 800-664-7762 and select the appropriate prompts
- International dealers: Contact their regional office
April 6, 2021
Dear Dealer:
Harley-Davidson has learned that thermal conditions caused by having a glossy, chrome finish on the interior of the bulb shield in the XL Headlamp Assembly, part number 68297-05A, used on certain model year 2019 – 2021 XL models (see model list below) for the DOM, CAL, and CAN configurations built between 02/01/19 and 3/23/21, may cause a hole to develop in the tip of the dual-filament bulb. This hole may allow the sealed gas to escape from the bulb, which can cause the powered filament to fail prematurely. Investigation of this issue indicates that switching to a different beam (high to low or low to high) to restore lighting causes the second filament to fail. A loss of both high and low headlamp beams in succession during nighttime driving may increase the risk of a crash.
We have voluntarily declared that this condition constitutes a safety defect to allow us to formally recall (Campaign 0177) all affected motorcycles. The remedy is to first confirm that the motorcycles are covered by this recall. If covered, perform the recommended recall update per Service Bulletin M1524 to replace the bulb shield in the headlamp. As part of Campaign 0177, any affected headlamp assemblies (part number 68297-05A) in your service parts inventory must also be updated with the recall remedy. Service Bulletin M1524 outlines the repair and credit procedures for the recall update. Please reference the bulletin for additional information.
In the interest of our customers’ safety, and as required by federal law, you may sell but not deliver any affected motorcycles until the remedy is complete. Please refer to H-Dnet / My Toolbox / Warranty Campaign Center. Select “Safety Campaign Open VIN list,” then select “0177” Campaign to view the VIN list.
In accordance with federal regulations administered by the National Highway Traffic Safety
Administration (NHTSA) and other appropriate market- specific government agencies, HarleyDavidson Motor Company, Inc. or authorized Harley-Davidson dealers will provide notice to all owners of record of affected products with direction to arrange for the recall service.
We take pride in the quality standards and controls we employ in our drive to lead the industry and deliver the world’s most desirable motorcycles. Thank you for your cooperation.
Sincerely,
Harley-Davidson Motor Company, Inc.
Recall 0177
For: Dealer Operator, General Manager, All P&A Roles, All Service Roles, Vehicle Sales Manager
Sent to: All U.S, Canada, Guam and Puerto Rico Dealers
Model Year List (production date range: 02/01/19 to 03/23/21)
Year | Models |
2019 | XL883L, XL883N, XL1200C, XL1200CX, XL1200X, XL1200XS, XL1200NS |
2020 | XL883N, XL1200CX, XL1200X, XL1200NS |
2021 | XL883N, XL1200X, XL1200NS |
14 Affected Products
Vehicles
MAKE | MODEL | YEAR |
HARLEY-DAVIDSON | XL1200C | 2019 |
HARLEY-DAVIDSON | XL1200CX | 2019-2020 |
HARLEY-DAVIDSON | XL1200NS | 2019-2021 |
HARLEY-DAVIDSON | XL1200X | 2019-2021 |
HARLEY-DAVIDSON | XL1200XS | 2019 |
HARLEY-DAVIDSON | XL883L | 2019 |
HARLEY-DAVIDSON | XL883N | 2019-2021 |
8 Associated Documents
Remedy Instructions and TSB
RCRIT-21V225-7394.pdf 271.493KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V225-6848.pdf 156.395KB
Recall 573 Report – Amendment 1
RCLRPT-21V225-9417.PDF 216.983KB
Recall Acknowledgement
RCAK-21V225-5516.pdf 696.858KB
Defect Notice 573 Report
RCLRPT-21V225-9033.PDF 216.413KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V225-2292.pdf 183.88KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V225-8692.PDF 211.323KB
Recall Quarterly Report #1, 2021-2
RCLQRT-21V225-9461.PDF 211.136KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V225&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- [High-Quality Headlight] Zmoon 7 inch led headlight made of aluminum alloy die-casting, sturdy and durable, and have excellent heat dissipation performance, fully sealed and effective waterproof, so this 7'' led motorcycle headlight has a service life of more than 80,000 hours. The high-quality PC lens has a light transmittance of more than 98%, ensuring safe driving at night.
- [2-Color & 4 Lighting Modes] 6000K/3500K dual-color 7 inch round led headlight has 4 lighting modes, high beam, low beam, white halo and amber halo, which perfectly replaces the original halogen.
- [Super Bright ] Zmoon 7 inch motorcycle headlight adopts high-strength LED chip, built-in EMC anti-flashing function.It does not require an additional decoder and is brighter than other headlights.
- [Compatibility] Zmoon 7 inch headlight is not limited to use on motorcycles, but also compatible with jeep wrangler JK LJ CJ TJ. And please determine the size of your motorcycle light housing before purchasing. (Diameter: 7.01'', Thickness: 3.67in'')
- [Plug and Play] This 7 inch LED headlight package contains H4-H13 adapters, the mounting bracket or mount housing is not included. If the adapter is not suitable for your motorcycle, please contact us, we will provide you with recommendations according to your situation. (NOTE:For Switchback, Road King, Street Glide, Electra Glide and Ultra Limited models need ring to fix headlight firmly).
- 【Four Lighting Modes】This 6.5-inch LED motorcycle headlight has 4 lighting modes, including 5000LM high beam, 2800LM low beam, and white daytime running lights.Brighter and more durable than halogen lamps and recessed headlamps.
- 【High-quality and Energy-saving】The motorcycle LED headlight shell is made of thickened die-casting aluminum alloy + PC material lens, which has better heat dissipation. This headlight features energy-saving technology and has a lifespan of over 80,000 hours.
- 【Easy to Install】White: Running lights. Black: Negative. Brown: low beam. Green: High beam. 2 brackets are included in the package. You can install it in about 10 minutes. (Working Voltage: DC 12V; Adapter/Plug: 3-Pin H4)
- 【Waterproof and Safe】This motorcycle headlight adopts IP67 waterproof protection grade lens and high-intensity led chip, and the effective irradiation distance is longer than other headlights. Keep your driving safe even in harsh environments day or night.
- 【Universal Model】This 6.5 inch headlight is suitable for various models.Such as for Dy-na Low Ri-der, for Dy-na Su-per Gli-de, for Dy-na Conver-tible, Sof-tail Deu-ce, Sof-tail Stan-dard, Heri-tage S-pringer, S-pringer Sof-tail, S-portster 1200, S-portster 883, Wi-de Gli-de, I-ron 883, S-treet Bob, Super-Low, Street 500, 700, Night Train, Night Rod, Breakout, Rocker C, Cross Bones, XR1200, Forty-Eight, Seventy-Two, etc.
- Adaptability: Universal headlight for all motorcycles with 12V voltage, Chopper Cruiser Bobber Touring Cafe Racer and other costume motorcycles.
- 【Material】 The headlight is made of high-quality metal material, strong toughness and long service life.
- Easy to install: 12V
- New Design: Fit your needs and make your bike charming. Suitable for motorcycles, motocross, scooters, cruisers, helicopters, etc.
- Package: 1 headlight with bracket.
- ✔Nice Exterior: Chromed Aluminum with Glass Lens, enhance the look of your Motorcycle with these Custom Headlights.
- ✔Easy to Install and Remove: 3 wires are configured, installed in a variety of motorcycles easily, which can be directly connected to the motorcycle ACC circuit, (AAC circuit means Adaptive Cruise Control .Which is the position where the key is controlled).Use the nut to secure the product in places you want to install.
- ✔Fitment: Universal fit for most motorcycle/cruisers/bikes with 10 mm mounting bolt thread.
- ✔Old School Style But Without Losing Grace. H4 Halogen Bulb ( Low Beam & High Beam)
- ❤FATECIM service: If the product make you dissatisfied or have any quality problems, just contact us by email, we would replace any defective products for our customers. Plesae don't hesitate to contact us by email.
- Universal 7" round LED Headlight: Fit 2012-later FLD,1994-2017 Touring Fit 2012-later FLD,1994-2017 Touring(Road King, Road Glide, Street Glide and Electra Glide,Ultra Limited models.... needs ring to fix LED headlight firmly ASIN: B01DDE589C; 2014+ Road Kings,Street Glides with dual beam headlight needs, 2014+ Touring,Trike models needs 3 prong plug)
- Super Bright: DOT SAE, E-Mark Rating. With 5pcs 10W high intensity LED chip, much brighter and durable than other headlights. The effective irradiation area is also more larger than other lights. 4000LM on high beam and 2800LM on low beam. White Angel Eyes for DRL, Amber Angel Eyes for Left/Right Turn Signal. Really light up the road for safer driving.
- Simple installation - Built-in Canbus, Plug & Play. Usually only take about 20 minutes to install the lights. (Connector: H4/H13).
- Scientific Optic Design: Powerful light sources, precision engineered reflectors and high performance optics are the most importance characteristics of directional lighting, We have developed and tested new illumination and night vision technology that produce safer light sources for safer driving. It won't blind other riders or drivers like other headlights.
- Newest Fantastic Design LED Headlight replaces original halogen and HID headlight, Maintenance Free; Package included: 1 X 7Inch Round Led Headlights + H4 to H13 adapter.
- High Performance:7inch Round LED Motorcycle Headlight with white Halo amber turn signal (left & right) Angel Eyes DRL,made of high power 6000K,Cool White LED chip, Super Bright and High Efficient, Compared to the yellow light of a traditional halogen bulb, the LED lamp has unique design and produces a daylight color impression and more noticeable amber turn signal that appears more natural to the driver and better views and road reflections make driving safer.
- 7 Inch LED Headlight:High-Low Beam,White DRL,Amber Left/Right Turn Signal.LED Canbus & H4/H13 Adapte;Maintenance Free;Qty of LED: 6pcs 10W LED/lamp;Luminous Flux: 4000LM@high beam,2400LM:low beam; Connector: H4/H13.
- Easy to install:the 7Inch 7" Round LED Headlights package comes with adapter, plug and play, just remove the original 7 inch headlight and change the wiring harness adapters. Waterproof and Dustproof Shockproof , Die-cast AluminumAlloy back housing, PC Lens,long Life-span above 50,000hr. Improve the appearance of the motorcycle, even in harsh environments can work properly.
- Aftermarket led headlights Lamp Shell, replace the entire headlamp assembly directly,it universal for most all of our 7INCH LED Headlight. FITMENT:Fit any motorcycles with 32~40mm fork tubes.FXWG, FXDWG, and FXST models with 7" LED Headlight 2004-2014 Sportster XL883 XL1200,such Honda CB400/ CB1300/ CB250/ CB600F/CB919.
- Trusted Brand:1pcs 7 inch headlight+1* Black lamp shell+ Black Lamp Shell Clamps+Adapter head.All LEDUR bulbs comply with DOT regulations, making them safe for road use and eliminating dangerous glare when properly installed.
- Perfect Design of Motorcycle Driving Lights: Aviation aluminum shell body with Double Lens more durable, effectively extend the lifespan of the light over 30,000 hours.Waterproof IP65 and anti-dust design can keep light working well in harsh conditions.Headlights produces brighter and farther lighting effect,Even super bright in the daytime, improving visibility at night or in bad weather.
- Widely Application: Universal 4" square 25W LED driving lights compatible with all 12-80V vehicles more suitable for motorcycle, off-road, trucks, fork, boat, cars, motor, ATV, pick-up, tractor, forklift, cruiser, etc.
- Adjustable Mounting Bracket: Motorcycle Led Driving Lights with adjustable stainless steel mounting bracket,the light pods could be adjusted to perfect lighting angle which makes changing direction of light beam easier to meet your applications.
- Easy Installation: For most vehicles, plug and play,Red wire connects High beam;Yellow wire connects Low beam;Black wire connects Negative , it is usually installation finished within about 15 minutes.
- BEST WARRANTY: ONE YEAR quality warranty. If you have any problems with the square led headlight, please feel free to contact us and we will give you best solutions!BEST WARRANTY: ONE YEAR quality warranty. If you have any problems with the square led headlight, please feel free to contact us and we will give you best solutions!
- PROUD OF YOUR BIKE - The way you feel when you look at your bike is as important as the way you feel when you ride it. Upgrade your attitude and boost your bike's boastability with our new 5.75" halo equipped LED headlights.
- SAFETY ALWAYS - A bright headlight is the first thing on the list for safety, and should be the last thing on your mind during the ride. Armed with reliable OSRAM LEDs, an integrated heat sink and an IP66 rating, these headlights have your back.
- SEE MORE - Take your adventure further with a headlight as powerful as your Harley. The huge projector low beam and the impressively back road dominating high beam deliver the total road visibility you need to keep riding long after the sun has set.
- DOT COMPLIANT- Your Harley undergoes brutal testing to ensure that it can handle the most severe punishment. Our headlights go through rigorous testing to ensure that they meet or exceed DOT standards for strength, longevity, and visibility.
- SIMPLE, REAL - Leave the budgets and deadlines at work. Bikes are all about straightforward and uncomplicated satisfactions. These headlights, with their standard 5.75" size and plug-n-play H4 connector, keep it simple and keep you rolling.
- The Best Value Upgrade Headlights - Super bright ,8000lm/4000lm high/low beam; Best beam pattern on the market: No blind area or dim spots; Very Sturdy; Modern Look, Elegant start-up halo; Plug&Play, IP67 waterproof
- Perfect Beam Pattern - The best "Z-shaped" cut-off line better than any other led headlights, Super bright and Uniform Light, No blind area or dim spots, NEVER BLIND ONCOMING DRIVERS; DOT SAE approved
- Stable Illuminance - HWSTAR 7 inch motorcycle headlight features the latest high quality chips, a unique anti-aging circuit and a more efficient heat dissipation design, which ensures that the illumination will not attenuate, making it as bright as brand new after years
- Fitment - Fits for Road King, Street Glide, Ultra Classic, Electra Glide, Heritage Softail, Softail Deluxe, Softail Slim, Fatboy, Switchback, Ultra Limited, Tri, CVO, 1989-2019. Note: Also Fit for Softail Slim, Softail Deluxe
- Lifetime and 100% Satisfaction Guaranteed - Any product issues, feel free to contact HWSTAR via amazon message center. Notes: Login your amazon account > choose "Your orders" > find the order ID > click "Contact seller”
- 【3 lighting modes】4 lighting modes of led motorcycle headlight with halo ring, includes 5000LM high beam, 2800LM low beam, white day running light and 6000K color temperature. Much brighter and durable than factory halogen and hid headlight bulbs.
- 【Waterproof & Highlight】The 5.75 inch motorcycle headlight adopts IP67 waterproof protection grade lens and high-intensity led chips, longer valid irradiation distance than other headlights. Ensure your driving safety even in a harsh environment both day and night.
- 【Durable & Energy-saving】The housing of motorcycle LED headlight is made up of thick die-cast aluminum alloy, which has better heat dissipation. More than 80,000 hours lifespan and energy saving.
- 【Easy Installation】The package comes with 2 brackets, simply plug and play the halo LED headlight on the lightbox, usually only take about 15 minutes to install.( Voltage: 12V, )
- 【Wide Compatibility】This motorcycle round led headlight approx 5.9x6.81 inches, fit for most motorcycles. Such as for Dyna Low Rider, for Dyna Super Glide, for Dyna Convertible, Softail Deuce, Softail Standard, Heritage Springer, Springer Softail, Sportster 1200, Sportster 883, Wide Glide, Iron 883, Street Bob, SuperLow, Street 500, 700, Night Train, Night Rod, Breakout, Rocker C, Cross Bones, XR1200, Forty-Eight, Seventy-Two.
Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.