“This site contains affiliate links for which OEMDTC may be compensated” |
January 28, 2021 NHTSA CAMPAIGN NUMBER: 21V030000
Seat Belt Wiring Harness May Chafe
The vehicle may stall and not restart, without warning, increasing the risk of a crash, personal injury or property damage.
NHTSA Campaign Number: 21V030
Manufacturer Autocar, LLC
Components SEAT BELTS
Potential Number of Units Affected 3,196
Summary
Autocar, LLC (Autocar) is recalling certain 2018-2021 Xpeditor vehicles. These vehicles may have a seat belt harness routing located too close to the seat mechanism. If the harness chafes and short circuits, the circuit protection fuse will open, and the engine will shut off and not restart.
Remedy
Autocar will notify owners, and dealers will route and secure the seatbelt wiring clear of the seat mechanism, free of charge. The recall began on March 25, 2021. Owners may contact Autocar customer service at 1-888-218-3611 or 1-877-973-3486. Autocar’s number for this recall is ACX-2101.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SAFETY RECALL BULLETIN
NHTSA RECALL 21V030
AUTOCAR, LLC SAFETY RECALL ACX-2101
March, 2021
ATTENTION:
Service Managers / Parts Managers.
SUBJECT:
Autocar has determined that a safety defect may exist in the routing of the seat belt wiring harness on certain 2018-2021 model year Xpeditor® vehicles. The seat belt wiring harness routing may be too close to the seat mechanism and may chafe, if the harness becomes chafed and short circuits, the circuit protection fuse will open, and the engine will shut off and not restart.
Note: This recall applies to left drive, right drive, and dual drive sit-down seating applications with suspension type seating. The repair time allowance is applicable to left, right or both. Stand-up drive and fixed position seating positions are not included or suspect under this recall.
SAFETY RECALL INFORMATION:
This document provides work instructions to inspect, repair or route the seat belt wiring harness(s).
VEHICLES AFFECTED:
There are 3196 units manufactured after September 1, 2017. To determine if a vehicle is affected by this Recall, log in to the Autocar Warranty Management System at www.autocartruck.com. From the main menu, select “View Recalls/Service Programs” and look for the Autocar recall number above. An excel file will be accessible with the VIN list of affected vehicles. Alternatively, to determine if a single vehicle is affected, select “VIN Profile” from the main menu in the Autocar Warranty Management System. In the “Chassis Number” field, enter the last 6 of the VIN. Once the VIN profile is displayed, scroll down to the “Recall/Service Program Information” section to determine if the Recall is open.
SERVICE RESPONSIBILITY:
Service sites must perform this recall on affected vehicles at no charge to the owner regardless of vehicle mileage, age, or ownership. If a vehicle affected by this recall is taken into or is currently in your vehicle inventory, or at your center for service, you must perform this Recall before the vehicle is sold or released to the owner.
REQUIRED PARTS:
Cable ties (obtain locally).
CLAIM CODING INFORMATION:
Repair Number (Op Code) | Time Allowance (SRT) | Description |
85208-0-28 | .60 HR | Seat Belt Wiring Harness |
SAFETY NOTICES:
WARNING
Allow the vehicle’s engine and cooling system to cool to ambient temperature before performing the repair procedure. A hot engine or cooling assembly may cause burns or other personal injury.
WARNING
Never rely on the hydraulic pressure to hold the cab in an open position. Always use the safety pin in the cab tilt lock tube to prevent serious personal injury or death.
WARNING
To prevent eye injury, always wear eye protection when performing vehicle maintenance, service or inspection.
WARNING
Before working on a vehicle, set the parking brake, place the transmission in neutral and block the wheels. Failure to do so can result in unexpected vehicle movement and can cause serious personal injury or death.
Working on CNG/LNG Trucks
SAFETY INSTRUCTIONS
If you store or dispense Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG), or if you work on CNG or LNG trucks, your location must be fully compliant with applicable codes, regulations and standards, including National Fire Protection Associate (NFPA) codes, Society of Automotive Engineers (SAE) standards, American National Standards Institute (ANSI) Natural Gas Vehicle (NGV) standards, the United States Code of Federal Regulations (CFR) and your state and local fire and other applicable codes (including, for example, the California Code of Regulations and the Texas Administrative Code).
Contact your local fire department for guidance and additional compliance information.
Technicians working on Autocar trucks with CNG or LNG engines must be trained in the proper repair of CNG and LNG trucks and engines and the safe storage and dispensing of CNG and LNG.
Working on CNG Fuel Systems
WARNING
CNG fuel systems include a high pressure (3600 psi) system for fuel storage and a low pressure system (125 psi) for consumption by the engine. Understanding the characteristics of CNG and how the fuel system works will prevent injury and damage to persons and property.
Attempting to operate or maintain any CNG fuel system without proper training is dangerous. Complete training and consult instructional bulletins from the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Safely Working on CNG Fuel Systems.
Welding and Hot Work Near CNG and LNG Trucks
WARNING
Welding, grinding, and other “hot work” can be safely performed on or near a CNG or LNG vehicle, but certain precautions must be followed. Understand and perform the necessary precautions provided by the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Welding and Hot Work Precautions Near CNG and LNG Vehicles.
CNG Cylinders
WARNING
CNG fuel containers must meet Federal Motor Vehicle Safety Standard (FMVSS) 304 (Compressed Natural Gas Fuel Container Integrity) and/or ANSI/CSA NGV2 (Basic Requirements for Compressed Natural Gas Vehicle Fuel Containers). Both standards specify a detailed visual examination every three years.
Truck owners are required to complete all necessary inspections, in accordance with the applicable standards and other resources, such as the Clean Vehicle Education Foundation and NGVAmerica’s Compressed Natural Gas (CNG) Container Visual Inspection Advisory.
FMVSS 304 also requires that cylinders not be used after the end of life (EOL) date provided on the tank label. The EOL date is also displayed in the engine compartment and at the fueling connection of each truck. If there are any question as to proper decommissioning of a cylinder, contact the manufacturer, whose name and address is also required to be on the label.
CNG Fuel Container Pressure Relief Devices (PRDs)
WARNING
PRDs must be properly maintained and positioned for safe operation of a CNG fuel system. Missing vent caps can allow moisture into PRDs and vent lines, which can freeze and damage these safety components. Debris which clogs the PRDs and/or vent lines can prevent proper function.
PRDs must be positioned to vent upward, not outward, from a vehicle.
Ensure that every truck owner completes periodic inspections of the PRDs and vent lines and systems, in accordance with guidance provided by the system component suppliers.
Alert First Responders to CNG and LNG
DANGER
In the event of a fire or other emergency, alert first responders to the presence and location of CNG fuel systems, tanks and dispensers. Ensure that emergency personnel are aware of proper precautions, such as those provided in Agility’s First Responder Guide: CNG and LNG Vehicle Fuel Systems.
LOCKOUT/TAGOUT PROCEDURES:
CAUTION
Before entering the vehicle or vehicle body, read and follow OSHA regulations concerning entry and working in “CONFINED SPACE” OSHA 1910.146 and “LOCKOUT/TAGOUT” OSHA 1910.147. Follow OSHA regulations while performing any work on the vehicle. The vehicle must be disabled by the following steps before performing any work on the vehicle:
1. Place the transmission in NEUTRAL.
2. Set the parking brake.
3. Shut the engine OFF.
4. Lock cab doors, keep the key in your Block the wheels before entering the body or performing any work on the vehicle.
5. Turn the battery disconnect switch OFF, if equipped.
6. Completely drain the air from the primary/A system and secondary/B system by opening the drain valves on the air tanks themselves or by using the drain manifold if supplied. When draining the air tanks, do not look into the area where air is Dirt or sludge particles may be expelled in the air stream and can cause eye injury.
7. Place magnetic “DANGER” signs on both cab doors before entering the body or performing any work on the vehicle.
8. Take proper precautions before working under the vehicle. Use ramps approved for the weight of your vehicle, or use floor jacks and Never work under a vehicle supported by jacks alone. Always use jack stands to support the vehicle.
The following work instructions are divided into three sections as follows:
Section I is applicable to left drive and dual drive sit-down suspension seating applications.
Section II is applicable to right drive and dual drive sit-down suspension seating applications.
Section Ill includes functional tests to be performed to verify seat belt warning function.
Section I
Left and dual drive sit-down suspension seating.
1. Follow all lockout/tagout procedures and verify the battery disconnect switch is in the “OFF” If the unit is not equipped with a battery disconnect switch, disconnect the battery cables beginning with the negative cables, follow by the positive cables.
2. Unlock and open the left door.
3. Locate the seat belt wiring harness and inspect for any chafing or damage (see Figures 1 and 2).
Note: If any chafing or damage is found, please contact Autocar Technical Support at 888- 218-3611 for further instructions.
4. After any repairs are completed or if no damage is found, verify the routing of the seat belt wiring harness is as indicated or route and secure the seat belt wiring harness as indicated using cable ties obtained locally (see Figure 2).
5. For left drive units proceed to Section III.
Section II
Right drive and dual drive sit-down suspension seating.
1. Unlock and open the right door.
2. Locate the seat belt wiring harness and inspect for any chafing or damage (see Figures 3 and 4).
Note: If any chafing or damage is found, please contact Autocar Technical Support at 888- 218-3611 for further instructions.
3. After any repairs are completed or if no damage is found, verify the routing of the seat belt wiring harness is as indicated or route and secure the seat belt wiring harness as indicated using cable ties obtained locally (see Figure 4).
4. Proceed to Section III.
Section III
Perform a functional test of the seat belt warning system.
1. Verify the battery disconnect switch is in the “ON” Or, if previously disconnected, reconnect the battery cables beginning with the positive connections followed by the negative connections.
2. For single drive position units (left or right): From the driver position, cycle the key switch to the on position (key on engine off) and observe the seat belt warning telltale. With the seat belt un-latched the telltale should be illuminated (see Figure 5).
3. Latch the seat belt and observe the seat belt warning With the seat belt latched, the telltale should no longer be illuminated. If the functional test passes, proceed to step 7. If the functional test fails, please contact Autocar technical support at 888-218-3611 for further diagnostic instructions.
Note: Steps 4 through 6 are applicable to dual drive dual sit-down suspension seating units.
4. For dual drive position units: From either driver position, verify the drive mode switch is selected for the seating position to be tested, cycle the key switch to the on position (key on engine off) and observe the seat belt warning telltale. With the seat belt un-latched the telltale should be illuminated (see Figures 6 and 7).
5. Latch the seat belt and observe the seat belt warning telltale. With the seat belt latched, the telltale should no longer be illuminated.
6. Repeat steps 4 and 5 for the opposite drive position. If the functional test fails, please contact Autocar technical support at 888-218-3611 for further diagnostic instructions.
7. If the functional tests pass, repairs are complete.
Note: If you have questions or concerns regarding this Recall, please contact Autocar technical support at 888-218-3611.
Autocar, LLC
4680 Pinson Valley Parkway
Center Point, AL 35215
888-218-3611
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s) with the VIN(s) indicated on the enclosed owner response cards.
AUTOCAR, LLC SAFETY RECALL ACX-2101
NHTSA RECALL 21V030
March 2021
Dear Autocar Truck Owner:
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3196, 2018-2021 model year Xpeditor chassis manufactured between September 9, 2017 and July 28, 2020 with non-sequential serial numbers between 224486 and 234305. Our records indicate that your vehicle was manufactured within this time period and may contain the defect described herein.
MODELS AFFECTED:
Autocar Xpeditor MY 2018-2021
COMPONENTS AFFECTED:
Seat Belt Wiring Harness May Chafe
SAFETY DEFECTS AND POTENTIAL RISKS:
The seat belt wiring harness routing may be too close to the seat mechanism, if the harness becomes chafed and short circuits, the circuit protection fuse will open, the engine will shut off and not restart, increasing the risk of a crash, personal injury or property damage.
REPAIR REQUIRED:
The seat belt wiring will be routed and secured clear of the seat mechanism.
TIME REQUIRED FOR THE REPAIR:
The labor time to repair your vehicle is .60 hour.
WHAT YOU SHOULD DO:
To have your vehicle repaired, contact your local authorized Autocar service site or email warranty@autocartruck.com.
PRIOR REPAIRS:
If you have previously paid for repairs relating to this recall you may be entitled to recover the amount you paid for those repairs. Submit a copy of all documentation supporting your claim to Autocar at the address set forth below in the “Assistance” section.
NOTICE REGARDING LEASED VEHICLES:
If you are a Lessor (as defined below) of a vehicle that is affected by this notice, you are obligated under federal law to provide a copy of this Notice to the lessee of such vehicle within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the lessee(s) to whom you send a copy of this Notice, the date you send the Notice and the VIN of the vehicle that you have leased to the lessee(s).
For purposes of this Notice, the term “Lessor” means a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the date of this Notice.
OWNER RECALL RESPONSE CARD:
The enclosed Owner Recall Response Card identifies your vehicle. Please complete this postage-paid card and return it to Autocar. If you do not own, have sold or have traded the vehicle identified on the card, please indicate that on the postage-paid card and return it to Autocar.
ASSISTANCE:
If you need assistance with this recall, call our toll-free numbers below or write to Autocar at:
Autocar, LLC
Service & Warranty Departments
551 S. Washington St.
Hagerstown, Indiana 47346
888-218-3611 (Toll Free)
877-973-3486 (Toll Free)
You may also submit a complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE
Washington, DC 20590
or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this recall may cause, but we hope you recognize Autocar’s concern for your safety and satisfaction with your vehicle.
Sincerely,
AUTOCAR, LLC
IMPORTANT SAFETY RECALL
AUTOCAR, LLC SAFETY RECALL ACX-2101
NHTSA RECALL NO. 21V030
March 2021
TO: U.S. Distributors
Dealer Principals, Service Managers, Warranty Managers, Parts Managers
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3196, 2018-2021 model year Xpeditor chassis manufactured between September 9, 2017 and July 28, 2020 with non-sequential serial numbers between 224486 and 234305 accordingly, a recall to address this issue is being initiated effective March 25, 2021.
MODELS AFFECTED:
Autocar Xpeditor MY 2018-2021
COMPONENTS AFFECTED:
Seat Belt Wiring Harness May Chafe
SAFETY DEFECTS AND POTENTIAL RISKS:
The seat belt wiring harness routing may be too close to the seat mechanism, if the harness becomes chafed and short circuits, the circuit protection fuse will open, the engine will shut off and not restart, increasing the risk of a crash, personal injury or property damage.
REPAIR REQUIRED:
The seat belt wiring will be routed and secured clear of the seat mechanism at no charge to the owner.
REPAIR AVAILABLE:
VIN profiles in the Autocar Warranty System will be updated to show the open recall on March 25, 2021 and a spreadsheet of the affected VINs will be available in the Warranty system.
REMINDER:
It is a violation of Federal law to sell or lease a vehicle covered by this recall notice unless the recall remedy has been completed. Substantial civil penalties apply to violations of this law.
If you have any questions or concerns, please contact the Autocar Warranty Department at warranty@autocartruck.com.
Sincerely,
AUTOCAR, LLC
ACF 00002 Rev. 000
551South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
SEOCONTENT-START
General Recall Reimbursement Plan
I. Introduction
Pursuant to 49 U.S.C. 30120(d), 49 C.F.R. Parts 573 and 577, and other applicable requirements, Autocar, LLC and Autocar Industries, LLC (collectively “Autocar”) hereby provides the National Highway Traffic Safety Administration (“NHTSA”) its general reimbursement plan for the cost of remedies paid for by vehicle owners before they are notified of a related safety recall.
As set forth at 49 C.F.R. and 49 C.F.R 573.13, the following information sets forth Autocar’s general plan to reimburse owners and purchasers for costs incurred for remedies in advance of notification of potential safety-related defects or noncompliance.
II. Reimbursement Notification
Autocar’s notice to a vehicle owner in accordance with 49 C.F.R. Part 577 will indicate whether Autocar is offering a refund. A vehicle owner will be eligible for reimbursement if the owner paid to have service to remedy the defect or noncompliance prior to a specified ending date.
As set forth at 49 C.F.R 573.13(c)(2), the ending date shall be 10 calendar days after the date on which Autocar mailed the last of its Part 577 notifications to owners in the United States, unless a specific reimbursement plan is made available for a particular recall.
Autocar’s notice will instruct owners to seek eligible reimbursement through Autocar’s Service & Warranties Department, at the following address or otherwise applicable business address:
Autocar LLC
Service & Warranties Department
551 S. Washington Street
Hagerstown, Indiana 47346
Owners will also be instructed that they may contact Autocar by telephone (toll free) at 888-218-3611 or 877-973-3486 NHTSA’s regulations (see 49 C.F.R. 573.13(c)) permit Autocar to identify a beginning date for reimbursement eligibility. Accordingly, an owner who paid to remedy the defect or noncompliance prior to the identified beginning date would not be eligible for reimbursement. Autocar puts its owners and customers first, and therefore, the company has generally has not firmly established such a beginning date for reimbursement eligibility, and as of the date of this policy, does not presently anticipate changing this general policy.
Should Autocar determine (as NHTSA permits) that a beginning date is appropriate, Autocar will indicate that date in the specific reimbursement plan for that particular recall. As permitted by 49 C.F.R. 577.11 (e), Autocar may not include a reimbursement notification when all vehicles are well within the warranty period, subject to approval by NHTSA.
III. Costs to be Reimbursed
For vehicles, reimbursement will not be less than the lesser of:
- The amount paid by the owner for the remedy that specifically addressed and was reasonably necessary to correct the defect or noncompliance that is the subject of the recall; or,
- The costs of the part(s) for the remedy (to be no more than the manufacturer’s list retail price for authorized part(s)), plus associated labor at local labor rates, miscellaneous fees (such as disposal Of waste), and taxes.
For replacement equipment, reimbursement will be the amount paid by the owner for each replacement item (limited to the amount of the retail list price of each defective or noncompliant item that was replaced, plus taxes, where the brand or model purchased by the owner was different than the brand or model that was subject to the recall). If the item of motor vehicle equipment was repaired, the reimbursement provisions identified above for vehicles will apply.
As set forth at 49 C .F .R. 573.13(d)( I j, costs incurred by the owner within the period during which Autocar’ s original or extended warranty would have provided for a free repair of the defect or noncompliance will not be eligible for reimbursement.
IV. Entity Authorized to Provide Reimbursement
Autocar will directly reimburse owners, unless a specific reimbursement plan is made available for a particular recall, and will encourage owners to pursue requests for reimbursement directly through its Service & Warranties Department to expedite reimbursement, as set forth above in Section Il. In whatever manner the request for reimbursement is made, under this Plan or a specific reimbu13ement plan, the owner Will be directed to submit the required documentation, upon which reimbursement eligibility Will be determined.
V. Required Documentation
The reimbursement determination will depend upon the information provided by the owner.
set forth at 49 C.F.R. Part 573.13(d)(4), the owner must submit all of the following information:
- Claimant’s name and mailing address;
- For motor vehicles, the vehicle identification number (or ‘VIN”), vehicle make, model, and model year;
- For replacement equipment, a description of such equipment or, for tires, the model and size;
- Identification of the applicable recalled (either Autocar’s recall number, or NHTSA’s applicable recall campaign number);
- Identification Of the owner Of the recalled vehicle at the time that the pre-notification remedy was obtained;
- An original receipt for the pre-notification remedy that includes a breakdown Of the amount for parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt covers work other than to address the recall or noncompliance, Autocar may require the claimant to separately identify costs that are eligible for reimbursement.
- If the remedy was obtained during the warranty period, documentation indicating that the warranty was not honored or that the warranty repair did not correct the problem related to the recall.
Failure to submit all of the above information may result in denial of the reimbursement request.
VI. Additional Information
The Part 577 required owner notice will provide a toll-free telephone number through which specific information about the reimbursement plan can be requested from Autocar.
As set forth at 49 C.F.R. 573.6, this general reimbu1Nment plan will be incorporated into notifications by reference. Information specific to a particular recall also may be incorporated into the Part 573.6 notification.
VII. Response Requests Reimbursement
Autocar will act upon requests for reimbursement as follows:
- Autocar will act upon a claim for reimbursement within 60 days of its receipt. If Autocar denies the claim, Autocar will send a notice to the claimant within 60 days of receipt of the claim that includes a clear, concise Statement of the reasons for the denial.
- If a claim for reimbursement is incomplete When originally submitted, Autocar Will advise the claimant within 60 days of receipt of the claim of the documentation that is needed and offer an opportunity to resubmit the claim with complete documentation.
Reimbursement shall be in the form of a check from Autocar.
VIII. Miscellaneous
Autocar Will make a COPY or this plan available to the public, upon request.
As permitted by 49 Autocar will not reimburse owners for recalls based solely on noncompliant or defective labels.
As set forth at 49 C .R. 573.13(n), reimbursement for a pre-notification remedy will not be provided to an owner if, in the case of a motor vehicle or replacement equipment other than a tire, it was bought by the first purchaser more than 15 calendar years before notice is given under 49 U S.C. 30118(c) or an order is issued under section 49 U.S.C. 30118(b). In the case Of a tire, this period shall be 5 calendar years.
Dated: June 1, 2020
SEOCONTENT-END
4 Affected Products
Vehicle
MAKE | MODEL | YEAR |
AUTOCAR | XPEDITOR | 2018-2021 |
11 Associated Documents
Recall Quarterly Report #2, 2021-2
RCLQRT-21V030-3819.PDF 211.232KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V030-6216.pdf 107.149KB
Remedy Instructions and TSB
RCRIT-21V030-3008.pdf 5054.27KB
Defect Notice 573 Report
RCLRPT-21V030-1557.PDF 215.195KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V030-2006.pdf 164.403KB
Safety Bulletin
RCSB-21V030-3363.pdf 5054.27KB
Recall Acknowledgement
RCAK-21V030-4530.pdf 645.818KB
Manufacturer Reimbursement Plan
RMRP-21V030-3235.pdf 613.304KB
Recall Quarterly Report #1, 2021-1
RCLQRT-21V030-1306.PDF 211.132KB
Recall Quarterly Report #3, 2021-3
RCLQRT-21V030-3977.PDF 211.32KB
Recall Quarterly Report #4, 2021-4
RCLQRT-21V030-5572.PDF 211.435KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V030&docType=RCL
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- 🚌【ABS OBD2 SCANNER】:The FX2000 diagnostic scanner for all vehicles can read and clear the Diagnostic Trouble Codes (DTC) data stream transmitted from the ABS. By retrieving the ABS code data, the obd scanner can check the various brake components and accurately diagnose problems.
- SIMPLIFYING CAR REPAIR - Our goal is to simplify your car repair process. Our device turns your smartphone into a powerful OBD2 scanner diagnostic tool, allowing you to quickly understand your vehicle's problem, view recommended fixes, and purchase the necessary parts for repair.
- EXPERIENCE PROFESSIONAL DIAGNOSTICS - BLCKTEC's enhanced vehicle diagnostics gives you access to advanced features typically found only on high-end scanners. With our car code reader you can read and clear engine codes, ABS (brakes), SRS (airbags), TPMS codes, and many more.
- RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.
- COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Our bluetooth OBD2 scanner works with most vehicles made after 1996, including cars, trucks, and SUVs, making it a versatile tool for any DIYer.
- USER-FRIENDLY APP - Our accompanying app is easy to use and navigate, with clear and concise information displayed in an easy-to-understand format. Available on IOS and Android.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 【Multi-Function OBD2 Scanner】GODIAG GD203 code reader is a cost-effective products for your vehicle maintenance. This obd2 scanner does not only professional in checking the ABS/SRS systems, but also do a lot of special reset functions like Anti-lock Brake Reset, Electronic Park Brake Reset, Diesel Particulate Filter Reset, Oil Service Light Reset, TPMS, TPS/TBA, etc.
- 【ABS Bleeding Scan Tool】When the vehicle has replaced the ABS computer/ABS pump, replacing the brake master cylinder, brake cylinder, brake pipeline, and brake fluid, there may be air in the Car's ABS system. Our car diagnostic scanner can help you check for ABS bleeding, which you should perform the ABS bleeding to bleed the brake system to restore ABS braking sensitivity.
- 【ABS SRS Scan Tool】The function of airbags is to reduce the degree of injury to the people in the event of a vehicle collision. You need to check frequently whether the ABS SRS is functioning properly. Our code reader can help you find common airbag problems easily include: malfunctioning airbags, disconnected airbag wiring, and damaged airbag sensors.
- 【Oil Light Reset, EPA, SAS】If the brake pads are damaged, the brake pads should be replaced, and the brake pads need to be reset at the same time. When your car replaces the steering angle position sensor, the steering angle needs to be reset to find the relative zero where the car keeps driving straight. The oil light reset is required when the car oil or the mechanical parts that monitor oil life are replaced. Our obd2 scanner can do these jobs very well!
- 【Support 17 Languages and Multiple Car Models】Supported languages include English, Spanish, German, French, Portuguese, Swedish, Italian, Simplified Chinese, Traditional Chinese, Russian, Japanese, Korean, Hungarian, Thai, Slovak, Dutch and Polish. This is a car scanner tool for ABS and SRS systems that supports most types of cars on the market. (Please Note: 28 special functions are excluded!)
- ABS/SRS OBD2 Scanner > Enjoy this ABS OBD2 code reader to reveal exact issues underlying in your brake, airbag, and engine systems, test individual ABS/SRS sensors, valves, or solenoids to quickly locate malfunctions (compatible with GM, Nissan, Fiat, Benz, Volvo, Land Rover, BMW, USA Ford, please reach us for details.), making sure critical safety systems work in perfect harmony together against accidents to be safe than sorry. NOTE: Only support upgrade on windows.
- 3 Most Needed Service Functions > This OBD2 scanner guides you through step by step procedures to reset oil service light and programmed mileage intervals for engine efficiency (Oil Reset); to calibrate steering wheel position for vehicle’s traveling in a straight line (SAS Reset); to clear the original low battery fault information against coming battery failures or damage (BMS Reset); saving your needless visits to mechanics. NOTE: Not suitable for all models, please reach us for compatibility.
- Full OBD2 Diagnostics > Say goodbye to the hassle of manual check-ups via this srs code reader. Quickly correct Check Engine Light warning on most OBD2/CAN compatible vehicles. Easily access to your smog status with one simple click I/M Readiness; and being filled with features for live data readings, freeze frame data, plus EVAP system, onboard monitor test means this scan tool checks all daily car care boxes.
- Work Easier > Red-Yellow-Green LEDs in this OBD2 scanner quickly show the overall DTC status without toggling through menu selections. HELP hotkey takes you directly to detailed descriptions/tips. Read/Erase DTC, I/M readiness shortcuts are added for optimized operation, along with DTC Lookup library for interpreting codes, designing the SRS OBD2 code reader a pleasure to use right out of the package even for beginners.
- Helpful Service > Get instant, free lifetime access to the most recent updates to add new car models and troubleshooting bugs making the OBD2 scanner a long-term investment for any home mechanics. The extended 1 years of quality assurance sweetens the worry-free deal even further. Multilingual Menu: EN, FR, ES, DE, IT, RU, PT, and JP. NOTE: Only support upgrade on windows.
Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.