“This site contains affiliate links for which OEMDTC may be compensated” |
January 8, 2021 NHTSA CAMPAIGN NUMBER: 21V002000
Lift Gate License Plate Light Alignment
A license plate light aimed toward other drivers may increase the risk of a crash.
NHTSA Campaign Number: 21V002
Manufacturer Marion Body Works Inc.
Components EXTERIOR LIGHTING, STRUCTURE
Potential Number of Units Affected 1
Summary
Marion Body Works Inc. (Marion) is recalling one 2018 Freightliner M2-106 Medium Duty vehicle equipped with a Maxon License Plate Kit. A license plate light may have been installed that aims rearward and not towards the license plate.
Remedy
Marion will notify the owner, and a dealers will provide a replacement kit, free of charge. The recall began January 11, 2021. Owners may contact Marion customer service at 1-715-754-5261. Marion’s number for this recall is 20E-034.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
FREIGHTLINER | M2 | 2018 |
5 Associated Documents
Recall Acknowledgement
RCAK-21V002-3751.pdf 244.691KB
Recall 573 Report
RCLRPT-21V002-9150.PDF 214.193KB
Recall 573 Report- Amendment 1
RCLRPT-21V002-7774.PDF 214.192KB
Recall Quarterly Report #1, 2021-1
RCLQRT-21V002-3193.PDF 211.133KB
Recall Quarterly Report #2, 2021-2
RCLQRT-21V002-0456.PDF 211.234KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V002&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Voltage: 12V, color: 6000K xenon white, power: 2w/pc, lumen:240lm/pc, dimensions: 1 by 0.47 inches, net weight: 2g/pc. Low power consumption for longer lifespan
- Each bulb has 24 pieces of 3014 led chips on it, 360 degree lighting angle, no blind spot, super bright brings your car a refreshed new look
- Fit bulb sizes: 168, 175, 194, 2825, W5W, T10, etc. Easy to install, just plug and play. Canbus error free, no error after installation
- Wide application: These led bulbs can be used for license plate tag light, map lights, dome light, front/rear side marker lights, trunk cargo room lights, turn signal lights, reading lights, glove box lights, inner tail light bulb, etc
- Package includes 2 pieces of AUXITO 194 led bulbs. Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
- 【Bright Light and Waterproof】: This truck license plate led bulb powered by 6 pieces upgrade LED chips. Principle of arc surface optical illumination outputs more and brighter beams. Sealed by high quality waterproof gel, this strong waterproof function allows you to driving worry-free in rainy or snow days.
- 【Parameter】:Voltage: 12V-30V; Wattage: 1.2W; Bulb Size: 66*33*22mm L*W*H (2.6*1.3*0.9in).; Wire length:152mm(6in); Weight: 14g(0.03lb)/bulb; Brightness: 100 lumens for each bulb. Screw hole distance 55 mm(2.2in). Two wires design. Easy to install, red wire for positive and black for negative.
- 【Long Lifespan】: Gold wire copper bracket lamp beads and smart IC driver insure bright light, low consumption, constant current and long lifespan. High temperature resistant PC lens, Anti-vibration ABS shell, high strength and good toughness.100% quality guarantee and buy with no worry.
- 【Warm Prompt】:Amazon's Recommender System is not 100% accurate.Please measure the location before purchasing.The distance from screw hole to screw hole is 2.2in (55mm).There are four screws inside the packaging.And the LED license plate light can directly screwed into the installation position.Convenient and firm.
- 【Application】: Our truck license plate led lights can be used as license plate light, courtesy light, dome/roof light, trunk/cargo light for truck, SUV, trailers, motorcycle, off-road truck, vans, bus, boat and other different kind of vehicles.
- Compatible with 1999 to 2016 Ford F-Series Superduty F250 / F350 / F450 / F550, 1990 to 2014 Ford F150, 1990 to 1999 Ford F250, 1990 to 1997 Ford F350, 2004 Ford F150 Heritage, 1990 to 1996 Ford Bronco, 1984 to 1988 Ford Bronco II, 1983 to 2011 Ford Ranger, 1991 to 2004 Ford Explorer, 1991 to 2010 Ford Explorer Sport Trac, 2000to 2005 Ford Excursion, 1997 to 2002 Ford Expedition, 2006 to 2008 Lincoln Mark LT
- Brighter Than Stock Bulbs: Built-in high power 3 SMD LED chips, super bright 6000k white light output illuminates license effectively. With CANBUS control unit, no error code, a best replacement for OEM
- Fully sealed: Our license plate lights passed waterproof test, made of high quality material, no corrosion, anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather, no water inside after a heavy rain or car wash anymore
- Easy Installation: Plug and play, exact fit and direct replacement, no modification or trimming needed, just take out your original bulbs and insert new plug into socket. Non-Polarity, no need to worry positive and negative connections
- Package Including: 2 x license plate lamps with instruction. 90 day manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period
- 12SMD high brightness LED chips per lights for maximum illumination.
- Working Voltage: 12V, universal fit for any 12V cars, trucks, trailers, & RV's.
- Just fit the hole distance of the license plate, very simply 2 wires hook-up installation.
- More than 300% brighter than original halogen bulb, built in stable current IC driver for longer lifespan.
- Warranty: fully ONE YEAR guaranteed for the manufacturer defect. Please check the fitment note application before purchasing.
- COMPATIBILITY: Compatible with Chevy Silverado 1500 2500 3500, Suburban Tahoe, Chevy Avalanche, GMC Sierra 1500 2500 3500, Yukon /Yukon XL, for Escalade, etc. (For more details, please refer the description.)
- EXTREMELY BRIGHT: Each lamp has 18 SMD 6,000K white 3014 led chips. 300% brighter than your factory license plate lights, maximize the rear end illumination but no blind to back up camera
- 15 MINUTES INSTALLATION: Non-polarity plugs, simply plug & play, direct fit into original housing without modifications. Simple upgradation but greatly increase the visibility of your license plate.
- CAN-BUS READY: Better electric circuit stability, error free for 99% of vehicles, no OBC (on-board computer) error warnings, no interference with FM radio.100% street legal
- LONGER LIFESPAN: Made of quality and flame resistant PC material. IP65 waterproof rate ensures LESAUCE tag lights working over 50,000hrs under different circumstance
- 【HIGH QUALITY】 Each of the License Plate Light equips with 1 Piece Bright Enough 5050-SMD Three-core White Lamp. Working voltage: 12V, Power: 0.24 wattage, Wire length: 18.1 inches, Light holder dimension: 17*12mm. Cold white with little blue color. 20 Lumen per bulb.
- 【COMPATIBILITY】Universal fit for Cars, Motorcycles, Trucks, RVs, ATV, Bikes. Easy to install, replace the plate screw bolt, and simply bolt-on, tight and shock-proof.
- 【WATERPROOF DESIGN】 Waterproofing process are employed to the diodes, the connection between the screw bolt and wire, which protects the light from rain.
- 【ALUMINIUM HOLDER】 The Motorcycle License Plate Light use aluminum light holder, long lifespan and rust free. It equips with super brightness led light bulbs, provide maximum visibility and security. Keep you safer when you driving a car or motorcycle at night.
- 【SUPPORT】Please always feel free to contact us at the first time if you have any problems with the bulb, we would provide 1 year refund service to make your purchase risk free.
- HIGH QUALITY DIODE: Each of the License Plate Light Equiped with 1 Piece 12V Bright Enough 5050-SMD Three-core White Lamp (Cool Tone, Maybe Someone Thinks It is A Little Blue). Long Lifespan and Low Consumption.
- ALUMINIUM LIGHT HOLDER: Our License Tag Light Use Aluminium Light Holder, Which Finished with Thick Black Spray. Round, Cute and also Rust Free.
- RAINPROOF DESIGN: Waterproofing Process are Employed to the Diodes, the Connection between the Screw Bolt and Wire. This Design can Protect the Light from Rain.
- EASY TO INSTALL AND EXTENSIVE FITMENT TYPE: Direct Replace the Number Plate Screw Bolt, and Simply Bolt-on, Tight and Shock-proof. Legal Assistance for Passing the Inspection of Cars, Motorcycles, Trucks, RVs, ATV, Bike
- CLIENT SUPPORT: Please Feel Free to Contact Us at First If There is Any Problem When You Receive or Use Our Products. We are Always Here to Support You.
- 【Wide Application】Great for license plate light, courtesy light, dome/roof light, trunk/cargo light for trucks, SUV, trailers, vans, off-road vehicles as additional add-on lamp.
- 【Bright Light&Waterproof】This truck license plate led light powered by 6 pieces upgrade LED chips. Super bright LED(6 LED lights) provide maximum visibility and safety.
- 【Easy to install】Direct bolt-on, Easy to install, red wire for positive and black for negative. shock resistant.
- 【Long Lifespan】long life span and low power consumption. High temperature resistant PC lens, Anti-vibration ABS shell, high strength and good toughness.
- Application: license plate light, tail light, side light, license plate tag light, courtesy door step light, dome/roof light, trunk/cargo light, under hood light etc.
- ✔️【300% BRIGHTER】 Our light are 10 times brighter than OEM license plate light.Built-in 36pcs high power SMD LED chips to maximize rear view.
- ✔️【EASY INSTALLTION】 Plug and Play with no additional wiring, you can install it on your own within 10 minutes.
- ✔️【DIRECT-FIT REPLACEMENT】Identical to OEM Specification. No Modification or Trimming Needed. Compatible with 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 20102011 2012 2013 Silverado 1500 / Sierra 1500; 1999 to 2004 Silverado 2500 / Sierra 2500; 2001 to 2007 Sierra 3500 / Silverado 3500; 2007 to 2013 Silverado 3500 HD / Avalanche / Sierra 3500 HD; 1999 to 2013 Silverado 1500 2500 HD / Sierra 1500 2500 HD; For all of above model with Step Bumper
- ✔️【SAE & DOT APPROVED】100% street legal.Protctive thermal control system prevents overheating.No OBC(on-board computer)error messages.Meet all regulations in USA & Canada.
- ✔️★ ★ UNLIMITED SERVICE: You got our unlimited service, we aim to provide good product and great service.
- ILLUMINATE YOUR PLATES - Dramatically increase your vehicle or boat's visibility and aesthetics by showcasing its plates in blazingly bold cold-white LED illumination; sleek and elegant black housing makes a bold styling statement.
- SECURE SURFACE-MOUNTING - Our kit comes fully-loaded with all hardware and accessories required for surface-mounting installation; includes rust-resistant stainless steel bracket and screws.
- IP67 WATERPROOF RATED- Fully - Submersible, waterproof design protects the kit from water damage; excellent LED license plate light for all-weather driving and marine vessels like boats and personal watercrafts.
- LEGENDARY BUILD QUALITY - Meticulously crafted from rust-resistant materials; gray ABS hood designed to reduce glare from the LEDs; rugged polycarbonate lens is resistant to dust and water; features a water drainage system for marine applications.
- DOT & SAE CERTIFIED - Backed by a DOT FMVSS-108 Certification, our stud-mount LED license plate kit abides by local laws and regulations for added peace of mind.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.