MC 20-13 – 2021 Kawasaki Z400 ABS, Ninja 400 & Ninja 400 ABS Camshaft Chain Tensioner Replacement

“This site contains affiliate links for which OEMDTC may be compensated”

December 11, 2020 NHTSA CAMPAIGN NUMBER: 20V774000

Camshaft Chain Tensioner Improperly Heat-Treated

A damaged camshaft chain tensioner can cause the engine to stall, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V774

Manufacturer Kawasaki Motors Corp., U.S.A.

Components ENGINE, ENGINE AND ENGINE COOLING

Potential Number of Units Affected 1,770

 

Summary

Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2021 Z400 ABS (ER400D), Ninja 400 (EX400H) and Ninja 400 ABS (EX400G) motorcycles. The strength of the camshaft chain tensioner may be insufficient due to improper heat treatment, possibly causing it to be damaged.

 

Remedy

KMC will notify owners, and dealers will replace the camshaft chain tensioner, free of charge. Note: Owners are advised to not ride their motorcycles until the repair has been completed. The recall began December 21, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC’s number for this recall is MC20-13.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Kawasaki Recalls

 


SERVICE

MC 20-13
December 18, 2020

 

TITLE: 2021 Z400 ABS, NINJA® 400 & NINJA® 400 ABS CAMSHAFT CHAIN TENSIONER REPLACEMENT

 

CAMSHAFT CHAIN TENSIONER REPLACEMENT

RECALL

THIS BULLETIN IS OF THE HIGHEST PRIORITY AND MUST BE ACTED UPON IMMEDIATELY TO ENSURE CUSTOMER SAFETY.

 

Eligibility

Eligible Units

Year Model Model Codes
2021 Z400 ABS ER400DMFNL, ER400DMFNN
2021 NINJA 400 EX400HMFAL, EX400HMFAN, EX400HMFNL, EX400HMFNN
2021 NINJA 400 ABS EX400GMFAL, EX400GMFAN,

EX400GMFBL, EX400GMFBN

EX400GMFNL, EX400GMFNN

 

Verify eligibility using VIP in K-Dealer before starting the repair.

Please check VIP (Vehicle Information Portal) in K-Dealer for other possible repair campaigns for eligible units.

 

Subject

On some eligible units the strength of the camshaft chain tensioner is insufficient due to improper heat treatment. Continued use can result in camshaft chain tensioner damage, leading to noisy operation, and possibly, engine stalling, which could result in loss of control and increase the risk of a crash.

 

Kawasaki Action

Initiate Campaign:

Kawasaki has initiated a Recall campaign to repair all eligible units. The repair consists of replacing the camshaft chain tensioner.

 

Notify Registered Owners:

Kawasaki is sending a Recall letter to all registered owners of eligible units. A copy of the letter is printed on page 6 of this bulletin.

 

Dealer Action

Repair Eligible Units:

Repair all eligible units including sold units in the field and unsold units in your dealership inventory prior to delivery to the retail purchaser. It is the obligation of authorized Kawasaki retail Dealers to repair eligible units in Dealer’s possession prior to retail sale. Failure to comply with this obligation to repair all units eligible for Recall or FDM campaigns by the Dealer constitutes a breach of the Dealer Sales and Service Agreement. Refer to Service Policies bulletin SP 08-01. Refer to the Repair Procedure section of this bulletin for details.

 

IMPORTANT NOTE:

  • It’s the law! Under the U.S. National Highway Traffic Safety Administration (NHTSA), Federal Law 49 U.S.C. Section 30120(i) requires dealers to perform Recall repairs before delivering any vehicle affected by the Recall to a purchaser

 

Document Completed Repairs:

Federal law requires manufacturers to maintain accurate follow-up records on repairs performed on eligible units. Dealers MUST submit a Warranty Claim for each repair. Refer to the Warranty Information section of this bulletin for details.

 

NOTE:

  • If you fail to submit a Warranty Claim for a new unit that is subsequently sold and registered, the new owner will receive the Recall letter requesting the return of the vehicle to you for repair.

 

Submit Product Registration:

Submit the product registration to Kawasaki via K-Dealer immediately after retail sale of any eligible unit. Be sure to supply the correct customer name and mailing address. Kawasaki uses the product registration information for customer notification. Also, if you know that the customer has moved, please submit a Customer Update via K-Dealer.

 

Parts Information

Repair Kit Part Number:

Install repair parts on all eligible vehicles.

Order parts to complete the FDM through K-Dealer as outlined in Service Bulletin SP15-03.

Kit, Camshaft Chain Tensioner, MC20-13

P/N 99999-0795

Ref Contents Qty
1 Tensioner Body 1
2 O-Ring 1

 

Repair Procedure

Refer to the appropriate service manual for detailed information related to parts removal and installation:

ER400D 99832-0015-02
EX400G/H 99832-0021-02

 

Preparation

  • Remove the rear seat.
  • Remove the front seat.
  • Remove the right side cover.
  • Remove the lower fairing (EX400 Only).
  • Remove the lower inner fairing (EX400 Only).
  • Remove the right middle fairing (EX400 Only).
  • Remove and retain the frame bracket bolts [A].
  • Remove and retain the right frame bracket [B].

 

NOTICE

Do not turn over the crankshaft while the tensioner is removed. This could upset the camshaft chain timing, and damage the valves.

 

Camshaft Chain Tensioner Removal

  • Remove and retain the camshaft chain tensioner cap bolt [A] and washer [B].

 

  • Remove and retain the spring [A].
  • Remove and retain the camshaft chain tensioner mounting bolts [B].
  • Remove and discard the camshaft chain tensioner [C].

 

Camshaft Chain Tensioner Installation

  • Install the new O-ring [A] from the repair kit on the new camshaft chain tensioner [B] from the repair kit.
  • Release the stopper [C] and push the push rod [B] fully into the tensioner body [D].

 

  • Install the tensioner body [D] so that the longer edge [E] of the push rod [B] and the stopper [C] faces upward.

 

  • Tighten the camshaft chain tensioner [A] mounting bolts [B] to 87 in·lb (1.0 kgf·m, 9.8 N·m).

 

  • Install spring [A], washer [B] and cap bolt [C].
  • Tighten the camshaft chain tensioner cap bolt [C] to 15 ft·lb (2.0 kgf·m, 20 N·m).

 

Install Removed Parts

  • Install the right frame bracket [B] and tighten front bolt [A] to 25 ft·lb (3.5 kgf·m, 34 N·m).
  • Tighten the rear bolt [A] to 25 ft·lb (3.5 kgf·m, 34 N·m).

 

  • Install the right middle fairing (EX400 Only).
  • Install the lower inner fairing (EX400 Only).
  • Install the lower fairing (EX400 Only).
  • Install the right side cover.
  • Install the front seat.
  • Install the rear seat.

 

Perform Operational Check

  • Start the engine and listen for any abnormal noise from the cam chain and camshaft chain tensioner

 

NOTICE

If abnormal noise is present after installing the new tensioner, check the camshaft timing and replace any damaged parts. Call Kawasaki Dealer Care at 1-800-854-3800 for authorization.

 

Warranty Information

This is a safety Recall campaign. Repair is authorized regardless of ownership or warranty status. Repairs MUST BE PERFORMED IMMEDIATELY ON ALL ELIGIBLE UNITS in the field and during initial assembly and preparation if the inspection reveals a damaged brake hose or sensor wire.

See the Warranty Policies and Procedures Manual (claim type 3 information) for detailed instructions when submitting the Warranty Claim.

ER400D EX400G/H
Job Code 22537 22538
Flat Rate Time 0.2 0.5
Claim Type 3 3
Part Number 99999-0795 99999-0795
Description Kit, Camshaft Chain Tensioner, MC20-13 Kit, Camshaft Chain Tensioner, MC20-13
Quantity 1 1

 

Repair Verification

  • The white paint mark on the new camshaft chain tensioner as shown below will serve as repair verification.

 

NOTE:

  • Repair verification is an essential part of the repair procedure. Along with the physical repair verification, check VIP (Vehicle Information Portal) in K-Dealer for other possible repair campaigns for eligible units.

 


2021 Z400 ABS, NINJA® 400 & NINJA® 400 ABS CAMSHAFT CHAIN TENSIONER REPLACEMENT

IMPORTANT SAFETY RECALL

NHTSA RECALL NO. 20V-774

 

Dear Kawasaki Motorcycle Owner:

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Kawasaki Motors Corp., U.S.A., has decided that a defect which relates to motor vehicle safety exists in certain 2021 Z400 ABS, NINJA 400 & NINJA 400 ABS models.

 

The reason for this notice:

On affected units, the strength of the camshaft chain tensioner is insufficient due to improper heat treatment. Continued use can result in camshaft chain tensioner damage, leading to noisy operation, and possibly, engine stalling, which could result in loss of control and increase the risk of a crash. Our records indicate that you have purchased one of these units.

 

What Kawasaki and your dealer will do:

Kawasaki has authorized your dealer to replace the camshaft chain tensioner on your motorcycle. All repairs will be performed free of charge. The actual repair will take up to 30 minutes but may take longer due to scheduling at the dealership and the time needed to obtain required parts.

 

What should you do to ensure your safety?

Please call your Kawasaki dealer to schedule an appointment to have your motorcycle inspected and repaired as required. Please have your Vehicle Identification Number (VIN) ready when calling. To locate the nearest authorized Kawasaki motorcycle dealer, please visit www.kawasaki.com and click on the “LOCATE DEALER” link. If you are unable to transport your motorcycle to your nearest Kawasaki dealer, please contact Kawasaki Motors Corp., U.S.A. to make arrangements for the transportation and repair of your motorcycle. The transportation and repair will be conducted with no cost to you.

 

DO NOT RIDE YOUR MOTORCYCLE UNTIL THE REPAIR HAS BEEN COMPLETED.

 

If you need help:

If you have questions or concerns that your dealer is not able to resolve, please contact Kawasaki’s Customer Care Department at (866) 802-9381 (toll-free) between 7:00 a.m. and 4:00 p.m. PT Monday through Friday. Please have your Vehicle Identification Number ready when calling.

If your dealer fails or is unable to remedy this defect without charge within a reasonable amount of time (60 days after your first attempt to obtain remedy), you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration,

1200 New Jersey Ave. S.E., Washington, D.C. 20590, or call the toll-free Vehicle Safety Hotline at 1(888) 327-4236 (TTY: 1-800-4249153); or go to https://www.safercar.gov.

 

If you received this notice in error:

Our records indicate you are the current owner of the motorcycle described in this letter. If you no longer have the vehicle described in this letter, please help us to update our records at www.kawasaki.com by clicking on “OWNER CENTER => OWNER SUPPORT => UPDATE OWNER INFO” or by calling Kawasaki toll free at (866) 802-9381. Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.

 

Reimbursement:

If you have experienced the failure described above prior to receiving this letter and have paid to have it corrected, you may be eligible for full or partial reimbursement for your documented cost of repair(s). To apply for reimbursement, please send copies of current owner and VIN information along with copies of repair orders and payment confirmation to the following address:

Kawasaki Motors Corp., U.S.A.
ATTN:  Consumer Services Department
P.O. Box 25252
Santa Ana, California 92799-5252

 

Please note the following conditions for reimbursement:

Claims may be excluded if proper documentation is not included. Current owner and VIN information along with copies of repair orders and payment confirmation must be provided.

We are sorry for any inconvenience this may cause, but we have taken this action in the interest of your safety and your continued satisfaction with your Kawasaki motorcycle.

Sincerely,

Kawasaki Motors Corp., U.S.A.

 


REF: 20-22 MC
CODE: National
DATE: December 11, 2020

 

IMPORTANT STOP SALE NOTICE:

STOP RETAIL SALES AND DELIVERY OF
2021 Z400 ABS, NINJA® 400 & NINJA® 400 ABS MODELS

Year Model Name Model Code
2021 Z400 ABS ER400DMFNL, ER400DMFNN
2021 NINJA® 400 EX400HMFAL, EX400HMFAN, EX400HMFNL, EX400HMFNN
2021 NINJA® 400 ABS EX400GMFAL, EX400GMFAN,

EX400GMFBL, EX400GMFBN

EX400GMFNL, EX400GMFNN

 

Subject:

Kawasaki is issuing a stop sale notice for 2021 Z400 ABS, NINJA 400 & NINJA 400 ABS models.

On eligible units, the strength of the camshaft chain tensioner is insufficient due to improper heat treatment. Continued use can result in camshaft chain tensioner damage, leading to noisy operation, and in the worst case, engine stalling, which could result in loss of control and increase the risk of a crash.

What Dealers Must Do:

  • DISCONTINUE 2021 Z400 ABS, NINJA 400 & NINJA 400 ABS MODEL SALES IMMEDIATELY
  • CONTINUE PROCESSING AND SENDING PRODUCT REGISTRATION PAPERWORK FOR RECENT Z400 ABS, NINJA 400 & NINJA 400 ABS PURCHASERS

Kawasaki expects to issue repair information to dealers the third week of December of 2020. Owners of eligible units will be notified to contact an authorized Kawasaki motorcycle dealership to schedule an appointment to complete the repairs.

We apologize for any inconvenience experienced and are working toward a resolution of this matter as quickly as possible.

KAWASAKI MOTORS CORP., U.S.A.

For a complete listing of all current Kawasaki sales programs, please see our comprehensive eBinder on k-dealer.com.

 



3 Affected Products

Vehicles

MAKE MODEL YEAR
KAWASAKI ER400D 2021
KAWASAKI EX400G 2021
KAWASAKI EX400H 2021

 


10 Associated Documents

Recall Quarterly Report #3, 2021-2

RCLQRT-20V774-7206.PDF 211.345KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.39 KB]

 


Recall Quarterly Report #2, 2021-1

RCLQRT-20V774-0171.PDF 211.259KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.31 KB]

 


Recall Quarterly Report #1, 2020-4

RCLQRT-20V774-8451.PDF 211.152KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Manufacturer Notices(to Dealers,etc) – IMPORTANT STOP SALE NOTICE

RCMN-20V774-0144.pdf 30.216KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [29.51 KB]

 


Remedy Instructions and TSB

RCRIT-20V774-9630.pdf 1976.125KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.88 MB]

 


Recall Acknowledgement

RCAK-20V774-5493.pdf 245.102KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.36 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V774-4568.pdf 120.158KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [117.34 KB]

 


Defect Notice 573 Report

RCLRPT-20V774-5146.PDF 214.635KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.60 KB]

 


Recall 573 Report – Amendment 1

RCLRPT-20V774-7592.PDF 214.636KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.61 KB]

 


Recall 573 Report – AMENDMENT 2

RCLRPT-20V774-7936.PDF 214.636KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.61 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V774&docType=RCL

 


 

SaleBestseller No. 1
Castrol Power1 4T 5W-40 Full Synthetic Motorcycle Oil, 1 Quart, Pack of 6
  • Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
  • Race derived technology for maximum engine acceleration
  • Extreme high temperature air-cooled performance and water-cooled engine performance
  • Excellent shear stability to prevent viscosity breakdown
  • Exceeds API SL and JASO MA-2
SaleBestseller No. 2
Motul 7100 4T 5W40 100% Synthetic Engine Oil 4 Liters (104087)
  • 100% Synthetic Ester
  • Formulated To Meet The Latest Manufacturers' Specifications
  • Improved High Temperature Deposit Protection And Sludge Control
  • Ensures Optimum Clutch Performance At Start-Up, Acceleration, And Full Speed
  • Standards: Ape Sn, Jasso Ma2
Bestseller No. 3
Liqui Moly Motorbike 4T Synth 5W-40 Street Race | 4 L | Motorcycle Synthesis Technology Engine Oil | SKU: 20076
  • Optimal lubrication in all operating conditions, ensures low oil consumption
  • Very high shear and ageing stability, highest levels of wear protection
  • Tested and approved for catalytic converters, optimal engine cleanliness
  • Ideally suited for wet clutches
  • Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
SaleBestseller No. 4
Castrol Power 1 Racing 4T Motorcycle Oil - 5W40-1qt. 06113
  • Race-derived technology for maximum engine acceleration
  • Extreme high temperature air-cooled performance and water-cooled engine performance
  • Excellent shear stability to prevent viscosity breakdown
  • Fit Type: Vehicle Specific
Bestseller No. 5
Motul Scooter Power 4t Motor Oil - 5w40-1l. 832011
  • 100% synthetic
  • Designed for powerful and recent scooters and maxi-scooters fitted with 4-stroke engines, displacement from 50cc to 650cc with or without catalytic converters
  • API SL JASO-MA approved
Bestseller No. 6
Liqui Moly Motorbike 4T Synth 5W-40 Street Race | 1 L | Motorcycle Synthesis Technology Engine Oil | SKU: 20074
  • Optimal lubrication in all operating conditions, ensures low oil consumption
  • Very high shear and ageing stability, highest levels of wearing protection
  • Tested and approved for catalytic converters, optimal engine cleanliness
  • Ideally suited for wet clutches
  • Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
Bestseller No. 7
RAVENOL J1V1001 SAE 5W-40 4-Stroke Motorcycle Oil - 4-T Full Synthetic Ester JASO MA/MA2 (1 Liter)
  • Please see Product Description regarding the California Proposition 65 Warning
  • Practiced and tested extensively with KTM, Husqvarna, Yamaha, Kawasaki, Honda, Aprilia, BMW, Suzuki, Ducati, Triumph, and Moto-Guzzi motorcycles
  • High performance full synthetic oil utilizing the latest lubrication technology
  • Excellent engine protection in all conditions including extreme high stress racing conditions
  • Excellent cold start lubrication, low oil evaporation tendency, suitable for motorcycles with catalytic converters
Bestseller No. 8
Shell Rotella T6 Full Synthetic 5W-40 Diesel Engine Oil (1-Gallon, Single Pack, New Packaging)
  • Full synthetic 5W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, oil breakdown, and improves low-temperature flow
  • Exceptional wear protection for longer life in a wide range of heavy-duty engine applications — from pickup trucks to tractors to semi rigs
  • Enhanced fuel economy capability of 1.5 percent without compromising engine protection or durability (compared to 15W-40 oils)
  • Multi-functional dispersant additives provide an enhanced level of protection against the effects of soot, dirt, and other contaminants (compared to previous formulation)
  • Increased shear stability for better viscosity control and optimal engine oil pressure
Bestseller No. 9
XPS 4 Stroke Synthetic Blend Engine Oil 5W-40 - Gallon - Can Am Spyder Sea Doo 779134/293600122
  • XPS synthetic 4-stroke oil is specifically engineered to meet the particular lubrication requirements of Can-Am, Spyder and Sea-Doo vehicles equipped with Rotax 4-TEC 4-stroke engines.
  • Powersport formula with premium anti-wear and anti-corrosion additives
  • Designed for high-performance off-road, on-road and PWC 4-stroke engines, including turbo or supercharged Powersports engines
  • Provides superior engine and transmission protection against rust and corrosion even in extreme conditions
  • Ambient temperature operating range: -31°F / 104°F (-35°C / 40°C)
SaleBestseller No. 10
Motul 300V 5W40 100% Synthetic Road Racing Engine Oil 4L (104115)
  • 100% Synthetic Double Ester
  • Designed for highly modified engines
  • Electrochemical bonding to metal parts
  • Up to 5x higher film strength
  • 0% shear loss on Bosch ASTM D6278 test

Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...