29-1252 – Battery Box Incorrectly Welded – 2019-2020 Forest River Rockport Work Trucks

“This site contains affiliate links for which OEMDTC may be compensated”

November 6, 2020 NHTSA CAMPAIGN NUMBER: 20V688000

Battery Box Incorrectly Welded

If the battery box detaches, it can increase the risk of a crash.

 

NHTSA Campaign Number: 20V688

Manufacturer Forest River, Inc.

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 94

 

Summary

Forest River, Inc. (Forest River) is recalling certain 2019-2020 Rockport work trucks. The battery box installed on these vehicles may be inadequately welded, and could detach.

 

Remedy

Forest River will notify owners, and dealers will inspect the battery box for proper welding, and if necessary install rivets to secure the battery box, free of charge. The recall began December 8, 2020. Owners may contact Forest River customer service at 1-574-522-7599. Forest River’s number for this recall is 29-1252.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


RECALL 20V688 REMEDY INSTRUCTIONS

Make(s): ROCKPORT
Model(s): RP5A2410290 & RP5A2610290
Model Year(s): 2019

Repair Code: 10-20V688
Allotted Time: 1.50 HRS.
Inspection Code: N/A
Allotted Time: N/A

Concern:
The battery box may not be welded adequately to the vehicle and may detach.

Photo(s) Required: YES
Prior Authorization Required: NO
Part(s) Kit Number: F0200020 (20V688)
Part(s) Return: NO

 

Block any tires/wheels to prevent the vehicle from rolling. Failure to do so may result in electrocution, fire or other personal injury, property damage and/or death.

 

TOOLS REQUIRED:

  • “F” DRILL BIT
  • MONO BOLT GUN
  • STANDARD DRILL
  • KIT F0200020 (20V688)

 

STEP 1: LOCATE THE BATTERY AND PUMP BOX LOCATED ON THE REAR CURBSIDE OF THE TRUCK;

 

STEP 2: REMOVE THE COVERS;

 

STEP 3: ONCE THE COVERS ARE REMOVED, LOCATE THE DRILLING AREAS SHOWN BELOW. DRILL THROUGH THE BATTERY BOX AND PUMP BOX HANGERS AND THE I-BEAM CROSS-MEMBERS WITH AN “F” BIT. TWO PER CROSS-MEMBER FRONT, AND BACK;

 

STEP 4: ADD THE RIVET USING A RIVET GUN AS SEEN BELOW;

 

STEP 5: ENSURE THE RIVET HAS FULLY ATTACHED, THERE SHOULD BE NO GAPS BETWEEN RIVET AND THE STEEL BRACE. ONCE RIVETS ARE INSTALLED IT SHOULD LOOK SIMILAR TO THIS;

 

Now that this is completed, you can move to any other fasteners that are required.  Please send a picture of the repair along with the last 8 of the VIN number to rockportwarranty@forestriverinc.com.

Call 574-327-2392 for any questions.

 



2 Affected Products

Vehicle

MAKE MODEL YEAR
FOREST RIVER ROCKPORT 2019-2020

 


8 Associated Documents

Manufacturer Notices(to Dealers,etc)

RCMN-20V688-0265.pdf 220.708KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [215.54 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V688-2209.pdf 207.813KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [202.94 KB]

 


Recall Quarterly Report #1, 2020-4

RCLQRT-20V688-2675.PDF 211.128KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Remedy Instructions and TSB

RCRIT-20V688-1126.pdf 614.845KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [600.43 KB]

 


Recall 573 Report – Amendment 1

RCLRPT-20V688-8200.PDF 213.618KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.61 KB]

 


Recall Quarterly Report #3, 2021-2

RCLQRT-20V688-7819.PDF 211.309KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.36 KB]

 


Defect Notice 573 Report

RCLRPT-20V688-4489.PDF 213.546KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.54 KB]

 


Recall Acknowledgement

RCAK-20V688-3924.pdf 244.716KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [238.98 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V688&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Automotive, Marine, Boat, RV Battery Tray - Group 27 Series with Strap, Battery Holder (27 Series)
  • Extreme-duty battery tray for Automotive, Marine, RV batteries
  • Battery Tray is constructed from high impact, heavy polypropylene plastic
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
  • Accommodates 27 series batteries up to 7" x 12.5", Safety Strap and buckle are included.
  • 8 mounting points (4 per long length)
Bestseller No. 2
NOCO BT31S Group 31 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24-31 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
SaleBestseller No. 3
Metal Steel Battery Mounting Box Tray Bracket DIY,Easy Bolt-In Battery Tray,Overall Length - Fits up to a 10.63” × 7.06” × 7.5” Battery, Anti-corrosion, No Rusting
  • 【Powerful Support】 The whole battery tray is made of steel. The steel sheet is connected to the steel sheet, the material is strong and has strong support, can easily carry the weight of the battery
  • 【Longer Life】The battery box has multiple round holes that facilitate air circulation and reduce water retention. The round holes also facilitate heat dissipation, which can improve battery life
  • 【Adjustable Size】The battery tray has adjustable bolts. This battery tray can hold batteries up to 10.63 "L × 7.06 "W × 7.5 "H, so it's compatible with most sizes of batteries. Please make sure that it is compatible with the size of the battery being used before selecting it.
  • 【Easy to install & Wide applications】The Battery mounting box adopts simple bolt-on design, no need to re-solder. Easy to install, easy to disassemble, save more time and money. Can be used in a variety of scenarios, such as car racks, camping, self-built cabins or boat cabins
  • 【More Sately】The surface of the battery bracket adopts flame retardant plastic spraying process, which effectively prevents oxidation, rust and corrosion. The main material of the battery bracket is carbon steel, which has good insulating properties and prevents the spread of battery leakage, providing higher safety.
Bestseller No. 4
NOCO BT27S Group 27 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 27 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
Bestseller No. 5
Attwood 9099-5 Battery Tray With Strap, 29/31 Series Battery, 12 7/8-Inches L x 7-Inches W, For Up to 10 1/2 Inches Tall
  • Reliable battery holder that fits into limited spaces
  • Simple to install
  • For 29/31 Series battery up to 10 1/2 inches tall
  • Molded base mounts easily with 4 #10 panhead fasteners
  • Battery remains easily accessible for charging or replacing
Bestseller No. 6
Camco Camper/RV Standard Battery Hold-Down Tray | Holds 24/24M Automotive Batteries | Fits Batteries Up to 11 1/8" L x 6 ¾" W x 8" H (55394)
  • Holds Batteries in Place: Safely holds group 24/24M automotive batteries to prevent movement during transportation
  • Safe and Durable Construction: Constructed of heavy-duty, acid-resistant plastic with stainless steel hardware
  • Fit: Fits batteries up to 11 1/8-inches (L) x 6 ¾-inches (W) x 8-inches (H)
  • Overall Dimensions: 11 9/16-inches (L) x 8 ½-inches (W) x 9 5/8-inches (H)
  • Includes: (1) tray, (2) rods, (1) cross bar and (1) knob
Bestseller No. 7
THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)
  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance.
  • The groove design prevents the battery from contacting the tray fasteners; the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need.
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55
Bestseller No. 8
Universal Battery Tray Hold Down Trunk battery Relocation Box Billet Aluminum 551181 For Optima Race Racing Mount Red Yellow Blue Top 34 34/78 D34 D34/78 34M D34M Battery Mount
  • Application - For Most Car and Truck batteries including the following optima sizes: For Red top: 34, 34R, 34/78 & For Yellow top: D34, D34/78 & For Blue top: 34M, D34M .
  • Package includes: 1*Base plate, 1*Top plate, 3*All-thread hold downs, 3*thread sleeves & 6*Matching nuts.
  • Quality - Made of high-quality aluminum alloy and iron, it is durable, rust-proof, and perfectly protects the battery.
  • Features - Designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware.
  • Perfect Design - Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).
Bestseller No. 9
Attwood 9092-5 Battery Tray with Strap, 24/24M Series Battery, 7-Inches L x 11-Inches W, for Up to 10 1/2 Inches Tall
  • Reliable battery holder that fits into limited spaces
  • Simple to install
  • designed to hold a 24/24M Series battery up to 10 1/2 inches tall
  • Molded base mounts easily with 4 #10 panhead fasteners
  • Battery remains easily accessible for charging or replacing
Bestseller No. 10
NOCO BT24S Group 24 Heavy-Duty Battery Tray for Marine, RV, Camper and Trailer Batteries
  • Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24 battery
  • Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
  • Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
  • Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
  • Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...