“This site contains affiliate links for which OEMDTC may be compensated” |
September 25, 2020 NHTSA CAMPAIGN NUMBER: 20V591000
A damaged engine block may leak oil, which can contact hot engine or exhaust components, increasing the risk of a fire.
NHTSA Campaign Number: 20V591
Manufacturer Forest River, Inc.
Components ELECTRICAL SYSTEM, ENGINE AND ENGINE COOLING
Potential Number of Units Affected 79
Summary
Forest River, Inc. (Forest River) is recalling certain 2020-2021 Dynamax Isata vehicles. Inadequate warmup protection can cause a lack of oil film on the engine connecting rod bearings while the engine is reaching operating temperature. This can result in engine damage and connecting rod failure, which could potentially puncture the engine block.
Remedy
Forest River will notify owners, and FCA dealers will reprogram the engine calibration software to enhance the engine warm up protection, free of charge. The recall began October 13, 2020. Owners may contact FCA customer service at 1-800-853-1403. Forest River’s number for this recall is 51-1234. FCA’s number for this recall is W57.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Safety Recall W57 / NHTSA 20V-511 Powertrain Control Module Software
IMPORTANT SAFETY RECALL
NHTSA RECALL: 20V591
CANADA RECALL: N/A
FR ID: 51-1234
FCA: 20V511
<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>> <<ZIP-XXX>>
<<DATE>>
This Notice applies to your vehicle VIN listed above.
Dear Forest River Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2020 – 2021 Dynamax Isata motorhome recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
WHAT IS THE DEFECT/NONCOMPLIANCE?
The Powertrain control module may have engine calibration software that does not provide adequate engine warm up protection.
EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
Inadequate warm up protection can cause a lack of film on the main rod bearing, resulting in engine damage such as connecting rod failure, which may puncture the engine, increasing the risk of a fire.
WHAT IS FCA AND FOREST RIVER GOING TO DO?
Forest River is notifying dealerships of the recall. FCA US will inspect and reprogram the Powertrain Control Module. This service will be performed at no charge.
WHAT SHOULD YOU DO?
Call your authorized Chrysler/Dodge/Jeep/Ram Dealership to schedule an appointment. Alternatively, you may call the FCA Recall Assistance Center at (800) 853-1403. An agent can confirm part availability and help schedule an appointment.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is .5 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.
WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?
If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.
Please send the service invoice to the following email address:
www.fcarecallreimbursement.com
What if you no longer own this vehicle?
If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner within 10 working days after the day in which the notice is received. You have received this letter because government regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the current owner.
PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.
MAY FOREST RIVER ASSIST YOU FURTHER?
If you have difficulties getting your vehicle repaired, please contact your FCA at the phone number listed below:
CONTACT | PHONE |
FCA CUSTOMER SERVICE | (800) 853-1403 |
If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you may write to the following address:
For US Owners Please Contact:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590
Or you may call the toll free Vehicle Safety Hotline at 1-888-327-4236 or (TTY: 1-800-424-9153).
Or visit www.safercar.gov and search;
Recall ID: 20V591
SEOCONTENT-START
IMPORTANT SAFETY RECALL
Page 1 of 2
<<DATE>>
This Notice applies to your vehicle VIN listed above.
Dear Forest River Customer:
This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to
you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of
Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2020
– 2021 Dynamax Isata motorhome recreational vehicles. This is to inform you that your vehicle may contain a defect that
could affect the safety of a person.
WHAT IS THE DEFECT/NONCOMPLIANCE?
The Powertrain control module may have engine calibration software that does not provide adequate engine warm up
protection.
EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.
Inadequate warm up protection can cause a lack of film on the main rod bearing, resulting in engine damage such as
connecting rod failure, which may puncture the engine, increasing the risk of a fire.
WHAT IS FCA AND FOREST RIVER GOING TO DO?
Forest River is notifying dealerships of the recall. FCA US will inspect and reprogram the Powertrain Control Module. This
service will be performed at no charge.
WHAT SHOULD YOU DO?
Call your authorized Chrysler/Dodge/Jeep/Ram Dealership to schedule an appointment. Alternatively, you may call the
FCA Recall Assistance Center at (800) 853-1403. An agent can confirm part availability and help schedule an
appointment.
HOW LONG WILL THE REMEDY PROCESS TAKE?
The estimated time of repair is .5 hours. However, the dealership may need to keep your vehicle or schedule an
appointment with you for a later date to fit into their regular service schedule.
WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?
If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall
inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope
of this defect under recall.
Please send the service invoice to the following email address:
www.fcarecallreimbursement.com
What if you no longer own this vehicle?
If you no longer own this vehicle and have the address for the current owner, please forward this letter to the new owner
within 10 working days after the day in which the notice is received. You have received this letter because government
regulations require that a notification is sent to the last known owner of record. Our records indicate that you are the
current owner.
PLEASE NOTE: FEDERAL LAW REQUIRES THAT ANY VEHICLE LESSOR RECEIVING THIS RECALL NOTICE
MUST FORWARD A COPY OF THIS NOTICE TO THE LESSEE WITHIN TEN DAYS.
DEPARTMENT OF COMPLIANCE
VEHICLE SAFETY AND RECALL MANAGEMENT
BUILDING 11
423 N MAIN ST
MIDDLEBURY, INDIANA 46540-9218
NHTSA RECALL: 20V591
CANADA RECALL: N/A
FR ID: 51-1234
FCA: 20V511
<<VIN>>
<<OWNER NAME/DEALERNAME>>
<<ADDRESS>>
<<CITY>>, <<ST>> <<ZIP-XXX>>
O Integrity
O Safety
O Quality
O Customer Service
IMPORTANT SAFETY RECALL
Page 2 of 2
MAY FOREST RIVER ASSIST YOU FURTHER?
If you have difficulties getting your vehicle repaired, please contact your FCA at the phone number listed below:
CONTACT PHONE
FCA CUSTOMER SERVICE (800) 853-1403
If you are still having difficulty getting your vehicle/towable repaired in a reasonable amount of time or without change, you
may write to the following address:
For US Owners Please Contact:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Ave, S.E.
Washington, D.C. 20590
Or you may call the toll free Vehicle Safety Hotline
at 1-888-327-4236 or (TTY: 1-800-424-9153).
Or visit www.safercar.gov and search;
Recall ID: 20V591
SEOCONTENT-END
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
DYNAMAX | ISATA | 2020-2021 |
6 Associated Documents
Recall 573 Report
RCLRPT-20V591-4621.PDF 213.589KB
Recall Acknowledgement
Manufacturer Notices(to Dealers,etc)
RCMN-20V591-3360.pdf 207.103KB
ISSUED Owner Notification Letter(Part 577)
RCONL-20V591-8795.pdf 207.103KB
Recall 573 Report – Amendment 1
RCLRPT-20V591-3153.PDF 213.666KB
Recall 573 Report – Amendment 2
RCLRPT-20V591-7822.PDF 213.763KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V591&docType=RCL
Chrysler Reprogramming
Chrysler J2534 Application Overview
Flash Availability - J2534/Pass Thru Device
Vehicle to Diagnostic Tool Reference Chart
Chrysler Recommended J2534 Devices
For Chrysler recommended J2534 device, see below table.
J2534 Device | Firmware Version |
CTC Vehicle Box * | 1.9 |
UCAN 2 | 1.0 |
Blue Streak -2534 Global Programmer | 2.10 |
Actia I+ME Passthru | 2.07 |
* Chrysler recommends the CTC Vehicle Box Device for Chrysler SCI ECU reprogramming. SCI reprogramming is used on most PCMs and TCMs prior to the introduction of CAN bus vehicles which began in 2004 (Durango).
Compatible J2534 Devices
Click on the link below to:
Download J2534 Application
(Install the wiTECH 2.0 J2534 Application on your computer)
Download the Setup Utility
(Configure your microPod/MDP device)
Launch wiTECH 2.0
(Once subscription and users are assigned to a tool please follow this link to access wiTECH)
https://www.mopartsp.com/support
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
- 🌐【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your scanner MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘.
- 🌐【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 🌐【High-speed Transmission Speed】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed to save more times and win more business.
- 🌐【Multiple Devices Connected with PC】Autel MaxiFlash Elite J2534 also supports multiple device connections to the PC, which can operate diagnostic and reprogramming functions on more than one vehicle at the same time. Autel MaxiFlash Elite J2534 built-in wireless and data storage, which can update via Internet. It also ensures quickly reprogramming even the newest controllers.
- 🌐【Extensive Compatibility】Autel MaxiFlash J2534 is compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 🔥【The King of Cost-Effectiveness From Autel】Fully upgraded from Autel MaxiSys EliteII /MS908S Pro/MK908P, Autel Scanner launched 2023 Newest 🅰🆄🆃🅴🅻 MaxiSys Elite II pro. 👉2 Years Free Update, ECU Programming&Coding, 38+ Service, Bidirectional Control, etc. Auto scanning 2.0 with all hardware parameters upgrade, provide total 8 (5+3)x diagnostic speed ✅CAN FD/ DOIP protocols support GM MY2020+ models, BMW E/F/G, Jaguar, Land Rover makes (Elite II can’t).
- 🔥【OE-LEVEL J2534 ECU PROGRAMMING & CODING】Enhance your diagnostics with the Elite II Pro J2534 Reprogramming scanner. This cutting-edge auto scanner supports : 1) program the new adaptive data to the on-board modules 2) replace the existing software/firmware in the ECUs 3) match the component control modules after repair or replacement 4) flash the hidden functions and 5) enhance the vehicle features. Experience 5X faster communication with SAE J2534-1 & -2 compliant programming interface.
- 🔥【38+ Maintenance Functions & High-End Functions】Autel scan tool Elite II Pro shares the same functional and deep service functions with other high-end scanners such as MaxiSys MS909/MS919/Ultra. 38+ special functions such as EPB/SAS/BMS/Oil/ABS/TPMS/Throttle/Injector/Suspension, etc., fix almost all “check engine” light issues. Bi-directional control, guided function, component matching, and scan VIN/license, together offer you effective and convenient diagnostic experiences.
- 🥇【DOIP& CAN FD Protocol, Top Hardware 5X Lightning Speed】Exclusive J2534 brings same DoIP & CAN FD protocol as Ultra/ MS919: CAN FD for GM MY2020+ Models; DOIP for BMW E/F/G Chassis, Jaguar, Land Rover makes. The improved hardware makes ELITE II PRO run more smoothly, even faster than MS919. It’s build with 8-Core CPU, Android 10.0 OS, 9.7’’ 1536*2048 touchscreen, 4GB&128GB, 11,000mAh battery, 2.4&5GHz dual-band WIFI, surpass Elite II/ Elite/ MS908S Pro II/ MK908 Pro II.
- 🔥【Free MV108 Assist Repairs】The MV108 digital inspection camera is designed to work with the MaxiSys series and PC, turning your MaxiSys scanner into a video inspection scope, allowing you to examine difficult-to-reach areas normally hidden from sight. It is capable of recording digital still images and videos, which offers you an economical solution to inspect machinery, facilities, and infrastructure quickly. One programmer tool Elite II Pro and one Videoscope MV108 make a perfect match.
- Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
- The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
- The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
- With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
- Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
- Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.