“This site contains affiliate links for which OEMDTC may be compensated” |
July 14, 2020 NHTSA CAMPAIGN NUMBER: 20V404000
Damaged Circuit Board May Affect Lighting Function
Non-functioning exterior marker lights can increase the risk of a crash.
NHTSA Campaign Number: 20V404
Manufacturer Daimler Trucks North America LLC
Components ELECTRICAL SYSTEM, EXTERIOR LIGHTING
Potential Number of Units Affected 12,038
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2018 Freightliner Custom Chassis Corporation (FCCC) XBP, 2016-2019 XCM, 2017-2020 XCS, 2018-2019 XBR, 2017-2019 XBS, 2016-2019 XCL, 2017-2020 XCP and 2016-2020 XCR recreation vehicle chassis that received the ‘inspection-only’ remedy from recall 18V-582. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.
Remedy
DTNA will notify owners, and dealers will replace the PDM, free of charge. DTNA issued owners an interim notification September 4, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-856.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Daimler Trucks
North America LLC
September 2020
FL856
Interim Recall Notice
NHTSA #20V-404
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: FCCC Motorhome Chassis Rear PDMs
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis
Corporation, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2016–2019 Freightliner Custom Chassis X-Line chassis manufactured December 7, 2015, through November 30, 2018, and equipped with a certain Power Distribution Module (PDM).
On certain X-Line multiplexed chassis, the rear marker, brake lights, or left turn signal lights may cease to function while driving. Brake lights that do not function correctly may not notify motorists of a braking event, which may increase the risk of a crash.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. Daimler Trucks is currently securing replacement parts. There is no action for you to take at this time.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the Recall for your vehicle.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Daimler Trucks
North America LLC
November 2020
FL856
Interim Recall Notice
NHTSA #20V-404
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: FCCC Motorhome Chassis Rear PDMs
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis
Corporation, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2016–2020 Freightliner Custom Chassis X-Line chassis manufactured November 23, 2015, through June 3, 2019, and equipped with a certain Power Distribution Module (PDM).
On certain X-Line multiplexed chassis, the rear marker, brake lights, or left turn signal lights may cease to function while driving. Brake lights that do not function correctly may not notify motorists of a braking event, which may increase the risk of a crash.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. Daimler Trucks is currently securing replacement parts. There is no action for you to take at this time.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the Recall for your vehicle.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-856
Date of Submission: August 7, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2018 Model Yr. End: 2018
Make: Freightliner Custom Chassis Model: XBP Chassis
Model Yr. Start: 2018 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XBR Chassis
Model Yr. Start: 2017 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XBS Chassis
Model Yr. Start: 2016 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XCL Chassis
Model Yr. Start: 2016 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XCM Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCP Chassis
Model Yr. Start: 2016 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCR Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCS Chassis
Production Dates: Begin: 11/23/2015 End: 11/30/2018
Descriptive Information: Chassis receiving an inspection only repair from recall campaign FL-788 and additional chassis’ equipped with a certain PDM manufactured within the suspect dates.
Number potentially involved: 11,077 Estimated percentage of involve with defect: 100%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance: On certain FCCC XB and XC chassis’, during manufacturing of the rear mounted Power Distribution Module (PDM), which is a PDM unique to these chassis, the internal circuit board may be inadvertently subject to bending stresses which may, after a period of vehicle use, lead to intermittent open circuits, in which the rear marker, brake lights or left turn signal lights may not function.
Describe the safety risk: Brake lights not working correctly may not notify motorists of a braking event which may lead to an increase crash risk.
Identify any warning which can precede or occur: Inoperative exterior lights can be detected during a pre-trip inspection.
If applicable, identify the manufacture of the defective or noncompliant component.: Eaton Corporation
Involved Components
Component Name: Power Distribution Module
Component Description: Power Distribution Module
Component Part Number: A66-05172-000, A66-05172-001, A66-05172-002, A66-05172-004,
A66-05172-005, A66-05172-006, A66-05172-008, A66-05172-009
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision.: June 18, 2020, NHTSA notified DTNA of one vehicle owner questionnaire (VOQ) and two field complaints that may be related to FL-788. DTNA opened an investigation to reevaluate the scope of FL-788. Complaint reviews, study of changes to supplier manufacturing and inspection processes revealed additional vehicles manufactured after the FL-788 population bookend June 29, 2018. Further, the voltage test used for a portion of the recall FL-788 population may not be adequate in identifying a failed PDM. July 7, 2020, DTNA, with an abundance of caution, decided to initiate a voluntary recall to campaign vehicles that received an inspection-only remedy and campaign vehicles not initially captured in the original FL-788 population. August 7, 2020, DTNA has removed additional suspect vehicles that received a PDM replacement.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement.: Vehicles will receive a new rear Power Distribution Module (PDM). Repairs will be performed by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.: Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected.
Planned Dealer Notification Begin Date: 09/10/2020
Planned Dealer Notification End Date: 09/10/2020
Planned Owner Notification Begin Date: 09/10/2020
Planned Owner Notification End Date: 09/10/2020
Manufacture’s identification code for this recall (if applicable): FL-856
DTNA Representative;
Daimler Trucks North America
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
***************************************************************************************************
Amended Defect Information Report
(Section 573.6)
FL-856
Date of Submission: June 17, 2021
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2018 Model Yr. End: 2018
Make: Freightliner Custom Chassis Model: XBP Chassis
Model Yr. Start: 2017 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XBR Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XBS Chassis
Model Yr. Start: 2016 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XCL Chassis
Model Yr. Start: 2016 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCM Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCP Chassis
Model Yr. Start: 2016 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCR Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCS Chassis
Production Dates: Begin: 11/23/2015 End: 06/03/2019
Descriptive Information: Chassis receiving a PDM with serial 18106398 or lower from FL-788 and additional chassis equipped with a certain PDM manufactured within the suspect dates.
Number potentially involved: 16,776 Estimated percentage of involve with defect: 100%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance: On certain FCCC XB and XC chassis, during manufacturing of the rear mounted Power Distribution Module (PDM), which is a PDM unique to these chassis, the internal circuit board may be inadvertently subject to bending stresses which may, after a period of vehicle use, lead to intermittent open circuits, in which the rear marker, brake lights or left turn signal lights may not function.
Describe the safety risk: Brake lights not working correctly may not notify motorists of a braking event which may lead to an increase crash risk.
Identify any warning which can precede or occur: Inoperative exterior lights can be detected during a pre-trip inspection.
If applicable, identify the manufacture of the defective or noncompliant component.: Eaton Corporation
Involved Components
Component Name: Power Distribution Module
Component Description: Power Distribution Module
Component Part Number: A66-05172-000, A66-05172-001, A66-05172-002, A66-05172-004,
A66-05172-005, A66-05172-006, A66-05172-008, A66-05172-009, A66-05172-010, A66-05172-011
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision.: June 18, 2020, NHTSA notified DTNA of one vehicle owner questionnaire (VOQ) and two field complaints that may be related to FL-788. DTNA opened an investigation to reevaluate the scope of FL-788. Complaint reviews, study of changes to supplier manufacturing and inspection processes revealed additional vehicles manufactured after the FL-788 population bookend June 29, 2018. Further, the voltage test used for a portion of the recall FL-788 population may not be adequate in identifying a failed PDM. July 7, 2020, DTNA, with an abundance of caution, decided to initiate a voluntary recall to campaign vehicles that received an inspection-only remedy and campaign vehicles not initially captured in the original FL-788 population. August 7, 2020, DTNA has removed additional suspect vehicles that received a PDM replacement. July – October 2020, DTNA continued to receive returned parts from the field for supplier analysis. October 2020, the supplier proposed expanding the FL856 population, reviewed the supplier proposal and performed a statistical analysis on parts returned to expand campaign FL-856 population to June 2019. October 30, 2020 with an abundance of caution, decided to expand a voluntary recall to campaign additional vehicles that may have received a PDM manufactured before November 30, 2018 either in the standard manufacturing process or in the recall remedy for FL-788.
March 2021, DTNA is accumulating parts needed for this recall and due to supply constraints, we do not have the minimum available to release the recall at this time. DTNA is working with our supplier to get parts that are needed for release. As DTNA informed NHTSA on June 10, 2021, DTNA anticipates promptly sending final owner letters when NHTSA approves the letter submitted to the agency on June 2, 2021 and when parts become available.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement.: Vehicles will be inspected and receive a new rear Power Distribution Module (PDM) as needed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.: Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected.
Planned Dealer Notification Begin Date: 09/03/2020
Planned Dealer Notification End Date: 09/30/2021
Planned Owner Notification Begin Date: 09/03/2020
Planned Owner Notification End Date: 09/30/2021
Manufacture’s identification code for this recall (if applicable): FL-856
DTNA Representative;
Daimler Trucks North America
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
*************************************************************************************************
Amended Defect Information Report
(Section 573.6)
FL-856
Date of Submission: March 19, 2021
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2018 Model Yr. End: 2018
Make: Freightliner Custom Chassis Model: XBP Chassis
Model Yr. Start: 2017 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XBR Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XBS Chassis
Model Yr. Start: 2016 Model Yr. End: 2019
Make: Freightliner Custom Chassis Model: XCL Chassis
Model Yr. Start: 2016 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCM Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCP Chassis
Model Yr. Start: 2016 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCR Chassis
Model Yr. Start: 2017 Model Yr. End: 2020
Make: Freightliner Custom Chassis Model: XCS Chassis
Production Dates: Begin: 11/23/2015 End: 06/03/2019
Descriptive Information: Chassis receiving a PDM with serial 18106398 or lower from FL-788 and
additional chassis equipped with a certain PDM manufactured within the suspect dates.
Number potentially involved: 16,776 Estimated percentage of involve with defect: 100%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance: On certain FCCC XB and XC chassis, during manufacturing of
the rear mounted Power Distribution Module (PDM), which is a PDM unique to these chassis, the internal
circuit board may be inadvertently subject to bending stresses which may, after a period of vehicle use,
lead to intermittent open circuits, in which the rear marker, brake lights or left turn signal lights may not
function.
Describe the safety risk: Brake lights not working correctly may not notify motorists of a braking event
which may lead to an increase crash risk.
Identify any warning which can precede or occur: Inoperative exterior lights can be detected during
a pre-trip inspection.
If applicable, identify the manufacture of the defective or noncompliant component.: Eaton
Corporation
Involved Components
Component Name: Power Distribution Module
Component Description: Power Distribution Module
Component Part Number: A66-05172-000, A66-05172-001, A66-05172-002, A66-05172-004,
A66-05172-005, A66-05172-006, A66-05172-008, A66-05172-009, A66-05172-010, A66-05172-011
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.: June 18, 2020, NHTSA notified DTNA of one vehicle owner questionnaire
(VOQ) and two field complaints that may be related to FL-788. DTNA opened an investigation to
reevaluate the scope of FL-788. Complaint reviews, study of changes to supplier manufacturing and
inspection processes revealed additional vehicles manufactured after the FL-788 population bookend
June 29, 2018. Further, the voltage test used for a portion of the recall FL-788 population may not be
adequate in identifying a failed PDM. July 7, 2020, DTNA, with an abundance of caution, decided to
initiate a voluntary recall to campaign vehicles that received an inspection-only remedy and campaign
vehicles not initially captured in the original FL-788 population. August 7, 2020, DTNA has removed
additional suspect vehicles that received a PDM replacement. July – October 2020, DTNA continued to
receive returned parts from the field for supplier analysis. October 2020, the supplier proposed
expanding the FL856 population, reviewed the supplier proposal and performed a statistical analysis on
parts returned to expand campaign FL-856 population to June 2019. October 30, 2020 with an
abundance of caution, decided to expand a voluntary recall to campaign additional vehicles that may
have received a PDM manufactured before November 30, 2019 either in the standard manufacturing
process or in the recall remedy for FL-788.
March 2021, DTNA is accumulating parts needed for this recall and due to supply constraints, we do not
have the minimum available to release the recall at this time. DTNA is working with our supplier to get
parts that are needed for release.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.: Vehicles will be inspected and receive a new rear Power Distribution Module (PDM)
as needed. Repairs will be performed by Daimler Trucks North America authorized service facilities.
Details of the reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.: Customer notification will be made by first class mail
using Daimler Trucks North America records to determine the customers affected.
Planned Dealer Notification Begin Date: 01/03/2021
Planned Dealer Notification End Date: 01/03/2021
Planned Owner Notification Begin Date: 01/03/2021
Planned Owner Notification End Date: 01/03/2021
Manufacture’s identification code for this recall (if applicable): FL-856
DTNA Representative;
Daimler Trucks North America
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
*****************************************************************************************************
REF #:
ICI20-037
Effective:
11/18/20
Release:
11/18/20
SUBJECT:
FL856 – Interim Recall Notice
This letter is to inform you that an Interim Recall Notice was sent to affected customers for upcoming recall FL856 ~ FCCC Motorhome Chassis Rear PDMs. The interim notice will begin mailing on November 20, 2020 and is attached to the back of this letter for your reference.
This notice is for informational purposes only. There is no action for customers or dealers to take at this time. If customers inquire, please refer them to the Interim Recall Notice and let them know the recall will begin when all preparations are completed.
If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC Link on DTNAConnect.
WARRANTY CAMPAIGNS DEPARTMENT
P.O. Box 4090
800-547-0712
Portland, Oregon 97208-4090
ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager
Freightliner Dealers – U.S. and Canada
Western Star and Sterling Dealers – U.S. and Canada
FCCC Dealers – U.S. and Canada
Thomas Built Buses Dealers – U.S. and Canada
Direct Warranty Customers – U.S. and Canada
Detroit Diesel Distributors
Export Distributors
SEOCONTENT-END
27 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FCCC | XBP | 2018 |
FCCC | XBR | 2018-2019 |
FCCC | XBS | 2017-2019 |
FCCC | XCL | 2016-2019 |
FCCC | XCM | 2016-2019 |
FCCC | XCP | 2017-2020 |
FCCC | XCR | 2016-2020 |
FCCC | XCS | 2017-2020 |
12 Associated Documents
Defect Notice 573 Report
RCLRPT-20V404-8199.PDF 217.274KB
Recall Acknowledgement
RCAK-20V404-1649.pdf 244.789KB
Recall 573 Report- Amendment 1
RCLRPT-20V404-6208.PDF 217.339KB
Miscellaneous Document- 573 Defect Information Report
RMISC-20V404-6497.pdf 626.509KB
Manufacturer Notices(to Dealers,etc)
Manufacturer Notices(to Dealers,etc)
Miscellaneous Document- Amended Defect Information Report
RMISC-20V404-3185.pdf 957.418KB
Recall 573 Report- Amendment 3
RCLRPT-20V404-8224.PDF 218.523KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V404-0377.pdf 228.786KB
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-20V404-2223.pdf 50.724KB
Miscellaneous Document-Amended Defect Information Report
RMISC-20V404-6112.pdf 627.256KB
Recall 573 Report- Amendment 4
RCLRPT-20V404-5260.PDF 218.576KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V404&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- What you receive: package comes with 10 pieces 3157 miniature bulbs, enough quantity to meet your multi usages, you can share them with your friends or as backup
- Durable to use: our miniature light bulb is made of quality material, can be applied for longer time than most standard bulbs, which can serve you for long time
- Nice design: the filament and gas mixture of the long time bulb have been engineered for withstanding road vibration and provide longer life than traditional bulbs
- Low Maintenance: our mini light bulbs are designed for durability, requires low maintenance, so you needn't to spend much time and effort on repairing these 3157 light bulbs
- Warm Note: the 3157 light bulb can only be applied for specific models, please make sure whether your models fit before purchase
- Twice The Life Of Standard Incandescent Bulbs
- Philips Offers A Wide Range Of Smart Light Bulbs, Lamps, Fixtures And Accessories
- Original Equipment Quality Seal For The Most Reliable Performance
- Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Bulbs Dim Over Time
- 【SUPER BRIGHT】 – Yorkim 3157 LED bulbs are powered by 18 pcs of high quality 5050 chipsets to offer ultra brightness for your vehicle. 360 degree lighting angle, no blind spot, super brighter than the stock yellowish halogen bulb, updates your car interior to a modern look
- 【SPECIFICATIONS】- Head diameter 18mm, Length 47mm, Voltage 12v, 6500K Xenon White. A 50w Load resistor(ASIN:B07KS6KMYG)might be needed to prevent error message when replace for Turn Signal Lights. You may also need a flasher relay to solve the fast blinker issue for some vehicles
- 【FITMENT】 - 3056 3057 3156 3157 4157, commonly used for backup reverse lights, brake lights, tail lights or turn signal lights.
- 【EASY TO INSTALL】 - Non-polarity design, simply plug and play. Not suitable for CK sockets.
- 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 3157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
- (Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: Each 3156/3157 LED red bulb is equipped with 39 pieces high quality, high power with high performance led chips per 3156 3157 LED bulb, 360° full angle illumination with projector lens design
- Important: Extra LED resistors maybe required to avoid the signal hyper flash or error code for LED bulbs draw less current than stock lamps. Compatible with both standard and CK / SRCK type. Voltage: 12V~14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- Dual filament LEDs are universal fit for single filament and dual filaments T25 wedge base bulbs. Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.
- Application: Used for upgrading OEM dim incandescent or damaged rear turn signals, directional blinker lamps, brake stop tail lights, taillights, rear side marker light amp for much safer driving and luxury looking for automotive cars, trucks, motorcycles, SUVs, vans.
- Newly upgraded smart IC driver for better performance and longer lifespan. USA located.
- 【Awesome Pattern & Full Brightness】 AUXITO design those 3157 red bulb with scientific theory with almost 1:1 shape and same light emitting point. Giving brilliant Red fuller light in your lens, more stylish and clean
- 【Directly Fit & Multi Application】Non-polarity, auxito 3157 red leds are plug and play for stock backup reverse lights, brake lights, turn signal lights, etc. Compatible with socket 3156, 3157, 3056, 3356, 3456, 4156, 3047, 3057, 3155, 3157NA, 3357, 3457, 4057, 4114, 4157, etc,.
- 【Stable Use & Longer Lifespan】Hidden hollow-carved and aviation grade aluminum body, expediting the heat dissipation of the led 3157. With special PC lampshade protecting led chips and components, those 3157 3156 red led can work up to 30,000 hours
- Specification & Note】Voltage: DC 12V. Power: 6W/Bulb. Lumen: 3200LM/Pair. Color: brilliant red. Pls note: 50W 6ohm load resistors or flash relay may be required when use them for turn signal blinker light. Message AUXITO if you need any help
- Twice The Life Of Standard Incandescent Bulbs
- Country Of Origin : China
- Original Equipment Quality Seal For The Most Reliable Performance
- Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Bulbs Dim Over Time.
- See Sylvania’s Application Guide in the Technical Details below to confirm compatibility
- Specifically designed to withstand road vibration and provide longer life than traditional bulbs
- Filament and gas mixture have been engineered for improved longevity
- Meets industry regulations for performance, while bettering life expectancy
- Produced by a trusted OEM automotive lighting manufacturer
- 600% Brighter than Halogen: This 3157 3156 red led bulb is 15W 1200Lm with 38-SMD 3030 led chips per bulbs to produce maximum brightness output, with 360° full view angel and HD projector, you will be able to see farther and clearer when driving even the rainy or foggy night.
- CANBUS Ready & Stable Performance: 3056 3057 led brake stop light bulb built-in CANBUS system prevents error code and odd flickering on the 95% of vehicles. the intelligent IC driver builted make the bulb better performance, such as low consumption, low temprature, long lifespan.
- Up to 100X Longer Lifespan: Aluminium alloy process housing, hollow structure design, produce less heat, ensures 50,000hrs longer service time, it's 100 times lifespan than halogens.
- Wide Application: Used for replacing the stock halogen or damaged dim 3156 3157 3056 3356 3456 4156 3047 3057 3155 3357 3457 4057 4114 4157 3rd brake stop lights, high-mounted stop lights rear side marker lights rear turn signal lights lamp replacement for cars, trucks, rvs, motorcycle,etc.
- Important Note: Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your owner manual to confirm or ask a question for help. (When some of Vehicel or Position experience occasional speed flash because of difference in power, it may be required load resistor, please ask us for free resistor)
Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.