“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10094164
Manufacturer Communication Number: SMB133
Summary
SERVICE MANUAL BULLETIN – PREVENTATIVE MAINTENANCE – CNG SECONDARY FUEL FILTER SERVICE.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NEW FLYER | NEW FLYER | 9999 |
SMB-133
ISSUE DATE: Feb 27 2014
CNG Secondary Fuel Filter
PM – PREVENTIVE MAINTENANCE
This bulletin provides clarification on the preventive maintenance instructions for the secondary fuel filter installed on your New Flyer CNG vehicle.
Ensure that the Zone One Venting Procedure is performed prior to replacing the CNG secondary fuel filter. Refer to “Zone/Stage One Venting Procedure” in Section 7 of your New Flyer Service Manual for procedure.
This information supersedes any prior information on this subject already provided in your New Flyer Service Manuals. Make this Service Bulletin available to service personnel to inform them of changed information.
SMB133
https://www.nhtsa.gov/recalls?nhtsaId=10094164
https://static.nhtsa.gov/odi/tsbs/2014/MC-10094164-6903.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【TWO MODES】: The 1/2 PSI gas regulator have both propane and natural gas mode. The factory setting of the nature pressure regulator is propane mode, if you need natural gas mode, please open the knob on the cover to convert the screw to natural gas mode, please refer to our picture for details.
- 【SPECIFICATIONS】:The therad on the Regulator is 1/2" Male Thread and the end of house is 3/8" Female Flare. When using LPG regulating valve: LP inlet pressure is 2.74Kpa(11 "w.c), outlet pressure is 2.45~2.55 kpa(10 "w.c), gas flow rate is 30L/min; When using natural gas regulating valve: LP inlet pressure is 1.74Kpa(7 "w.c). Outlet pressure is 0.95~1.05 kpa(4 "w.c), flow rate is 50L/min.
- 【FUNCTIONS】: This 102-B model rugulator converts your equipment that uses propane to one that uses natural gas. You can use it to replace the Kitchen Aid Natural Gas Conversion Kit 710-0003.Functions the same as the original part contents.
- 【CONVERSION MODEL】: This natural gas pressure regulator can converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787, 720-0787D, 720-0819, 720-0819A, 720-0891B, 720-0826, 720-0891R, 720-0893.
- 【WARM TIPS】: The natural gas conversion Kit is rated to operate from -32°F to 225°F (0°C to 107°C) Do not install the regulator too close to heating equipment or use it in very cold environments. Heat and cold will change the resistance of the spring inside the regulator. The gas pressure regulator will not shut off the gas flow.
- ❤ Same as Origina Replacement Parts of Kitchen Aid NATURAL GAS CONVERSION KIT 710-0003 Natural Regulator Inside Not Including the Qucik Connect Hose. 𝐓𝐡𝐞 𝐏𝐫𝐞𝐬𝐞𝐭 𝐨𝐟 𝐠𝐚𝐬 𝐢𝐬 𝐟𝐨𝐫 𝐋𝐏 𝐏𝐫𝐨𝐩𝐚𝐧𝐞, If you want to use for Natural, Please adjust the top of regulator according our description steps by hand.
- ❤ This conversion kit turns your KitchenAid liquid propane grill into a natural gas grilling machine by swapping out the existing components with an NG regulator and your current Natural hose.
- ❤ Converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787, 720-0787D, 720-0819, 720-0819A, 720-0891B, 720-0826, 720-0891R, 720-0893
- ❤ Converts your dual-gas propane grill to natural gas ( You need an existed Natural Hose to Use with this NG Regulator Kit) . The Regulator is Adjustable. When the LPG gas regulating valve is used: LP inlet pressure is 2.74Kpa(11"w.c), outlet pressure is 2.45~2.55 kpa(10"w.c), and gas flow rate is 30L/min; When the natural gas regulating valve is used: LP inlet pressure is 1.74Kpa(7"w.c). Outlet pressure is 0.95~1.05 kpa(4"w.c), flow rate: 50L/min
- ❤ The 1/2 PSI gas regulator of the 102-B model is compatible with natural gas and liquefied gas valves. The Fitting on the Regulator with 1/2" Male Thread and 3/8" Female Flare Fittings on the Hose.
- Perfect Fit: Fit for Kitchen-Aid 710-0003, fit for 720-0709 720-0709B 720-0709C 720-0826 720-0893 720-0819B 720-0745B 720-0745 720-0745A 720-0787D
- Multifunctional Compatibility: This regulator fits various grill models and can easily convert your liquid propane grill to a natural gas grill. Before purchasing, confirm with your grill supplier if you need to replace the orifice
- High-Quality Brass: Made with safe and reliable materials, our natural gas converter is not easily broken or deformed, works better, and lasts longer
- Easy to Install: Equipped with a 3/8 "Female Flare by 1/2" Male Flare Brass Adapter, this converter is easy to install. Just connect it to your grill and dial in your desired temperature
- What's Included: 1 x natural gas converter. If you have any problems with the products you received, please contact us in time
- Inlet Pressure: 250PSI / Pressure Regulating Range: 3 to 30 PSI
- Flow Rate: 49 SCFM
- Port Size: 1/4" NPT
- Includes 0 - 30 PSI Pressure Gauge & Bracket
- 1 Year Limited Warranty. Manufactured In Korea
- Air regulator for precisely regulating and maintaining constant air pressure
- Accurate downstream air pressure regulation between 1 and 150-psi
- High impact composite regulator knob and steel protected gauge
- 60-Scfm at 100-PSI with 1/4-inch NPT ports
- Comes with a 1-year limited
- Fitment: for Honda Accord EX, EX-L 3.5L V6 - Gas 2008-2017,for Honda Civic DX, EX, GX, Hybrid, LX 1.3L L4 - Electric/Gas, 1.8L L4 - CNG, 1.8L L4 - Gas 2006-2011,for Honda Civic Hybrid, Hybrid-L 1.5L L4 - Electric/Gas 2012-2015,for Honda Civic Touring, Type R 1.5L L4 - Gas, 2.0L L4 - Gas 2017-2020,for Honda Clarity Plug-In Hybrid, Plug-In Hybrid Touring 1.5L L4 - Electric/Gas 2018-2021,for Honda CR-V EX, EX-L, LX 2.4L L4 - Gas 2012-2014.
- Reference OE Part Number: 37260RNAA01/499000-7931. Good quality fuel rail pressure sensor, made of good quality, has strong stability and long-lasting durability.
- Powerful Function: Measure the pressure of the fuel in the common rail with sufficient accuracy and in a relatively short period of time to ensure that the proper pressure is transmitted to the fuel injector for smooth idling and acceleration.
- Easy Installation: You can replace the parts yourself with a fuel regulator to solve your vehicle problems, just remove the old parts and replace them with new ones, saving you a lot of money and time as well as improving the usability of your vehicle.
- NOTE: Make sure these parts fit your vehicle before buying, check that the dimensions match, if they don't, they are susceptible to wear and tear, and can make the sensor not fully functional, and may even create a safety issues. The sensors are manufactured to the same original equipment (OE) specifications as those produced by automakers to ensure proper system operation and restore vehicle performance without damaging the vehicle.
- IMPROVE EFFICIENCY - The air flow control valve can measure pressure of 0-140PSI;0-10 BAR, precisely control air output and helps ensure optimal atomization for HVLP paint application to reduce rework.
- WIDE APPLICATION - The regulator has a universal 1/4" thread inlet and a 1/4" thread swivel outlet, perfect compressed air accessory for air tools such as spray guns, sandblasters, plasma cutters, HVLP guns and more.
- CLEAR GAUGE - With different color to distinguish the pressure to make it easy to see at a quick glance. Simple and quick adjustment also improve the work efficiency.
- EASY ADJUSTMENT - Regulator and valve in one unit allows for effortless air pressure setting and control. Rotating the knob at the side while reading the pressure gauge.
- DURABLE - The whole body is made of aluminum and the rotating knob is zinc alloy with chrome plating that is durable and will withstand everyday use.
- Size: 1/4" NPT ; Material: Brass,Metaled housing gauge.
- Suitable for all 1/4 inch air tools and air compressor.
- Easy thumbscrew adjustment valve control & more easier and quicker to connect air tools.
- Provides fine air flow control for spray guns and air tools.
- High-quality in-line air flow regulator.
- PRESET IN-LINE PRESSURE REGULATOR FOR PNEUMATIC AIR TOOLS, CONNECTS DIRECTLY TO YOUR TOOL
- 1/4" FEMALE NPT INLET X 1/4" MALE NPT OUTLET TO AIR TOOL
- 94 PSI PRESET PRESSURE SETTING, LIGHT WEIGHT ALUMINUM BODY
- 230 MAX INPUT PRESSURE, 2 1/2" OVERALL LENGTH
- GRASP EXCELLENT AIR PRESSURE:Digital air pressure regulator is applicable to fixed air pressure source, with 1/4 "NPT male and female connector, which can be connected with any pneumatic tool such as spray gun and air compressor to control the flow of air output, help you adjust the air pressure in the spray gun more accurately, so that the spray gun can spray paint more quickly and evenly
- INTELLIGENT AND DURABLE: Compared with the traditional mechanical pressure regulator, the digital air pressure regulator is equipped with LCD digital display screen, which can clearly read data at any time to accurately control the working state of the spray gun. The product is equipped with batteries and can be replaced. With automatic shutdown function, it is more power saving and convenient
- EXCELLENT MATERIAL: The aluminum shell at the interface can effectively prevent the impact injury caused by impact or fall, and ensure that you will not affect the accurate air pressure adjustment for other reasons when using. The ABS material used in the shell is not only resistant to high temperature, but also can effectively resist various types of chemicals and solvents, suitable for various complex environments
- MULTIPLE AIR UNITS: Digital air pressure regulator supports the range display of multiple air units: 0-150PSI, 0-11BAR, 0-1100KPA and 0-11Kgf/cm ², It can be adjusted accurately in 0.5 units
- PROFESSIONAL AND CONVENIENT: Digital air pressure regulators can help you control pressure more accurately and professionally when painting walls, painting cars, painting walls, and coloring furniture. The product is small in size, light in weight, portable and easy to install, making it your most professional choice
Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.