“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10110621
Manufacturer Communication Number: SMB131
Summary
Service Manual Bulletin – Brake Inspection.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NEW FLYER | NEW FLYER | 9999 |
SMB-131
ISSUE DATE: Jan 31 2014
Brake Inspection
Models: VOK-07, HY1336 & HY1350
1 – FRONT AXLE & SUSPENSION
2 – REAR AXLE & SUSPENSION
This bulletin provides revised OEM information on the disc brake system on your New Flyer vehicle.
This information supersedes any prior information on this subject already provided in your New Flyer Service Manuals. Make this Service Bulletin available to service personnel to inform them of changed information.
SEOCONTENT-START
SMB-131 1 of 2
SERVICE MANUAL BULLETIN
This Service Manual Bulletin is prepared by the Publications Department of New Flyer Industries
Canada ULC. Refer to details below.
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2014 New Flyer Industries Canada ULC
ISSUE DATE: Jan 31 2014
SMB-131
APPLICABILITY
VEHICLE LENGTH ???? 30ft. ???? 35ft. ???? 40ft. ???? 60ft. ???? ALL
VEHICLE TYPE ???? High Floor ???? Low Floor ???? Invero ???? Xcelsior ???? ALL
FUEL TYPE
???? Diesel ???? Electric ???? CNG ???? LNG
???? ALL
???? Diesel/Electric ???? Gas/Electric ???? Fuel Cell
SUBJECT Brake Inspection
Models: VOK-07, HY1336 & HY1350
SECTION TITLE 1 – FRONT AXLE & SUSPENSION
2 – REAR AXLE & SUSPENSION
DETAILS This bulletin provides revised OEM information on the disc brake system
on your New Flyer vehicle.
This information supersedes any prior information on this subject
already provided in your New Flyer Service Manuals. Make this Service
Bulletin available to service personnel to inform them of changed information.
DRAFT
2 of 2 SMB-131
SERVICE MANUAL BULLETIN
SMB-131
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2014 New Flyer Industries Canada ULC
1. Brake Disc Run-Out
Inspection
☞NOTE:
Confirm that the wheel hub axial play is
within limits prior to proceeding with this
inspection. Refer to your New Flyer Service
Manual for wheel hub inspection procedure.
Ensure that the dial gauge is mounted with
the tip of the dial gauge perpendicular to
the disc at 1.40” (35 mm) down from the
outer rim of the disc. See “Fig. 1: Rotor
Run-Out Measurement Point” on page 2.
Maximum allowable lateral run-out has
been revised from 0.002″ (0.05 mm) to
0.006″ (0.15 mm).
Fig. 1: Rotor Run-Out Measurement Point
2. Brake Disc Crack Inspection
The maximum allowable depth and width
of radial cracks has been revised from
0.059″ (1.5 mm) to 0.020″ (0.5 mm)
????????????????????????????????????????????????????
s122265a.svg
DRAFT
SMB131
https://www.nhtsa.gov/recalls?nhtsaId=10110621
https://static.nhtsa.gov/odi/tsbs/2014/MC-10110621-9999.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- Qnkaa Dial Indicator Gauge: Measuring Range from 0-1". Resolution up to 0.001".
- With fine adjustment knob for precise positioning.
- Strong 2 magnet surfaces with ON/OFF control, overall height 9" magnetic stand base.
- Flat back or lug back option included (hole size 1/4”, 6.3mm). 22 pieces test tips included in the storage case.
- We are dedicated to ensuring your 100% satisfaction, If you have any issue during use, please feel free to contact us, our technical staff will reply and resolve the problem within 24 hours.
- Meets ASME and ANSI standards
- 001-inch resolution provides maximum accuracy and specificity
- Stainless steel rack and contact tip for reliable readings
- Rotatable bezel and adjustable markers help provide reference points for your measurements
- Features a 2-inch display face, a 1.5-inch long plunger, a 1/4-inch lug hole, and a two-year warranty
- Aluminum Alloy Digital Dial Indicator-- Large LCD Display with 3 Digits, Be Used to Accurately Measure Small Linear Distances in Mechanical and Industrial Processes without Reading Errors, An Ideal Tool for Mechanical, Industrial Processes and Laboratory Use
- 0 ~ 25.4 mm Measuring Range-- Measuring Range from 0 ~ 25.4 mm (0 ~ 1 inch), High Resolution up to 0.01 mm (0.0005")
- Included Rear Cover-- Hole Diameter: 6.5mm, It is Removable and Can be Used on Different Magnetic Base Holder Stand
- Inch/Metric Conversion-- Switchable between mm and inch, Suitable for All Kinds of Measurement
- Zero Setting, with Conveniencet Ports-- RS232 Data Output Interface and LR44 Battery Compartment, East to Replace Battery( Note: It Does Not Remember Zero Setting Position After Auto Off)
- Measuring range: 0-10mm (0.4") with graduation 0.01mm (0.004").
- Strong 2 magnet surfaces with ON/OFF control provides 176lbs (80kg) Max Pull (30mm and up thickness metal countertop/surface required for 176lbs pull)
- With fine adjustment knob for precise positioning.
- Lug back included (hole size 1/4”, 6.3mm). 22 pieces test tips included in the storage case.
- We are dedicated to ensuring your 100% satisfaction, If you have any issue during use, please feel free to contact us, our technical staff will reply and resolve the problem within 24 hours.
- Inch and Metric Reading Function; Extra Large LCD Screen: 1.6" x 0.7"; Auto Off after 5-7 mins (remember 0 position when turn on again)
- Flat Back or Lug Back Option Included (hole size 6.5mm); Stem Diameter: 3/8"; UNF 4-48 Threaded Tip
- Measure Range: 0-1"/25.4mm; Graduation: 0.0005"/0.01 mm; Accuracy: ±0.001"/0.03 mm
- 2 Magnetic faces available; Max pull 176 lbs (requires 30mm and up thickness metal/steel); The magnet works much better on thicker metal piece, thin metal/steel results less magnetic force
- Featured RS232 Data transfer port, must connect with “Clockwise Tools DTCR-01” Cable (NOT INCLUDED) to make data transfer to PC. DO NOT CONNECT WITH REGULAR USB CABLE; Professional Certificate Included
- 【Dial Test Indicator Tester Gage】: Mornajina magnetic dial indicator holder set with fine adjustment long arm, on and off switch, is made of steel hardened, professional and durable. Universal rotating shaft with fine-tuning knob for more accurate measurement. 0-1.0" Tester Gage, Dial Test Indicator Graduation 0.001" Precision.
- 【Magnetic Dial Indicator with Base Holder】: These dial Indicator with magnetic base precision measuring Gauge Tools Kit, strong 2 magnet surfaces with ON/OFF control, could provide 140lb-160lbs, power pull. For 160lb, it requires 30mm and up thickness metal countertop/surface.
- 【Measurement】: 1" dial indicator: graduation 0.001", 3/8" stem diameter. 2" Flat back or lug back option included (hole size 1/4”, 6.3mm). 9" Height Magnetic base, on and off switch. 2" width X 2-1/2" depth Base measures. 22-pieces indicator point set: AGD specifications (4-48 threads).
- 【Wide Application】: Applicable to various comparative measurements in the workshop and inspection room. It can be used with machine tools, equipment, and other measuring equipment to compare two heights or distances between narrow limits, to determine the errors in the geometrical form, to take accurate measurements of deformation, to take determine positional errors of surface, and to check the alignment of lathe centers.
- 【Package Includes】: 1 x 0-1" .001" Dial Indicator, 1 x Magnetic Base Holder, 1 x Orange Hard Plastic Case, 1 x 22-pieces Indicator Points Set. Great Dial Indicator with Magnetic Base and Point Precision Inspection Set. (NOTE: 100% satisfaction guarantee. For any problem for this item, please don't hesitate to contact us, we will reply you within 12 hours.)
- 【 Precision Dial Indicator 】The measuring range of the dial indicator is 0-1”, 001" increments for absolute precision. with fine-tuning knob for more accurate measurement. Professional measurement and calibration tools,Apply to measurement and calibration of different workshop machine
- 【Wide Application】You can quickly set-up, tune up, and check the accuracy of your shop's tools after use the dial Indicator .Applicable to various comparative measurements in the workshop ,ensure the accuracy of the work
- 【Adjustable 】There are 6 holes for the dial indicator rod .The chamfered groove rod has a spring plunger and two leveling nuts, you can adjust the nut to perfectly fit your mitered groove.
- 【 Durable & Water proof 】 Made of aluminium alloy, professional and durable.The exterior of the case is tightly sealed and has good water resistance.
- 【XDOVET SERVICE】We are committed to providing you with good products and excellent service .If you find any problems when you use it, feel free to contact with us. We would try our best to assist you and ensure your satisfaction
- Stainless steel stem
- Lug back
- Hardened steel spindle
- Hard coated crystal for scratch resistance
- Improved resistance to dust and water
- 【Professipnal Table Saw Gauge】Neoteck table saw gauge is designed according to the standard miter grooves(3/8 inchx 3/4 inch).It can check table saw miter slot to blade squareness, blade and fence alignment, arbor and blade run-out, or any other alignment and measurement you want, in order to make the table saw in its best condition, which is suitable for most table saws and can be widely used for aligning and calibrating work,shop machinery,band saws,drill presses.
- 【Accurate Digital Dial Indicator】The measuring range of the digital indicator is from 0 ~ 25.4 mm (0 ~ 1 inch) with high resolution up to 0.01 mm (0.0005"),also it is cwitchable between mm and inch with zero setting function. Compared with the dial gauge, Neoteck digital indicator can provide more convenient use experience and quickly help you finish the alignment work.
- 【CNC Anodized Aluminum Bar】2Pcs 0.75inch adjustable Long Anodized Aluminum Bar can meet most of your needs and processed by CNC machine to ensure the stability, 3 Chute partition ensure the hardness and applicability of the rod. Also, there are 6 holes for the dial indicator rod, so when you need to adjust the accuracy of different workshop machines, even if the distance between the chamfer groove and the blade is different, you can use this table saw aligment gauge.
- 【Easy to Install】You can quickly set-up, tune up, and check the accuracy of your shop's tools. This system is the self-adjusting “Smart Bar” that will stay tight in a miter slot that isn’t the same size along it’s slot length. You only need to adjust the spring plungers once, and after that, its a perfect fit in the miter slot, which is more efficient and convenient.
- 【Durable Package】Package includes: 1 x Digital Dial Indicator, 1 x Digital dial indicator ear back cover, 2 x plum blossom nut, 2 x spring plunger, 2 x Hexagon socket nut, 2 x Hexagon socket wrench, 2 x metal shop. What's more the durable storage case can well protect your table saw gauage set and it is more convenient for you to storage the gauge and can be carry with you to everywhere.
- Inch and Metric Reading Function:Switchable between mm and inch, Suitable for All Kinds of Measurement
- Extra Large LCD Screen: 1.6" x 0.7"; Be Used to Accurately Measure Small Linear Distances in Mechanical and Industrial Processes without Reading Errors, An Ideal Tool for Mechanical, Industrial Processes and Laboratory Use
- Flat Back or Lug Back Option Included (hole size 6.5mm); Stem Diameter: 5/16"; It is Removable and Can be Used on Different Magnetic Base Holder Stand
- Measure Range: 0-0.1"/25.4mm; Graduation: 0.0005"/0.01 mm; Accuracy: ±0.0005"/0.01 mm
- Zero Setting, with Conveniencet Ports-- RS232 Data Output Interface and LR44 Battery Compartment, East to Replace Battery( Note: It Does Not Remember Zero Setting Position After Auto Off)
Last update on 2024-03-22 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.