| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10144751
Manufacturer Communication Number: SMB181
Summary
This Service Manual Bulletin Updates the “DANGER” Notification Related to the Disposal of a Spring Brake Chamber in the Service Manual Instructions.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| NEW FLYER | NEW FLYER | 9999 |
SMB-181
ISSUE DATE: Aug 27 2018
Spring Brake Disposal
2 – REAR AXLE & SUSPENSION
This bulletin provides a”DANGER” related to the disposal of a spring brake chamber that may have been missed in your New Flyer Service Manual.
Make this Service Bulletin available to service personnel to inform them of changed information.
SEOCONTENT-START
SMB-181 1 of 2
SERVICE MANUAL BULLETIN
This Service Manual Bulletin is prepared by the Publications Department of New Flyer Industries
Canada ULC. Refer to details below.
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2018 New Flyer Industries Canada ULC
ISSUE DATE: Aug 27 2018
SMB-181
APPLICABILITY
VEHICLE LENGTH 30ft. 35ft. 40ft. 60ft. ALL
VEHICLE TYPE
Xcelsior® MiDi® Invero®
ALL
Low Floor High Floor
FUEL TYPE
Diesel Diesel/Electric CNG LNG
ALL
Fuel Cell Trolley/Electric Battery/Electric
SUBJECT Spring Brake Disposal
SECTION TITLE 2 – REAR AXLE & SUSPENSION
DETAILS This bulletin provides a”DANGER” related to the disposal of a spring
brake chamber that may have been missed in your New Flyer Service
Manual.
Make this Service Bulletin available to service personnel to inform them
of changed information.
2 of 2 SMB-181
SERVICE MANUAL BULLETIN
SMB-181
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2018 New Flyer Industries Canada ULC
1. REAR BRAKE CHAMBERS
Spring brake chambers contain powerful
springs that must be disarmed prior
to disposal. Contact the spring brake
manufacturer to obtain their recommended
disarming procedures.
Carefully follow all the manufacturers
warnings and cautions before discarding
or disposing of spring brake chambers.
SMB181
https://www.nhtsa.gov/recalls?nhtsaId=10144751
https://static.nhtsa.gov/odi/tsbs/2018/MC-10144751-9999.pdf
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
- TYPE - Air Brake Chamber Type 3030 30/30 30 30
- REPLACEMENT - Bendix 165255 K049898 NT3030STD120 NT3030STD-120 802547 // Meritor 3030TN2-HNTRX-C // Dayton 3030C // Haldex GC3030 GC3030P40 // Freightliner 3030TS // Mack 19QE441RP1
- SPECS - Brake Chamber Type: 3030 // Stroke: Standard // Stroke Length: 2-1/2" // Port Thread: 2x3/8" NPT // Bolt Thread: 5/8"-11 UNC // Push Rod Length: 11-3/4" // Weight: 21lbs
- FEATURES -
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- TYPE - Long Stroke Air Brake Chamber Type 3030 30/30 30 30 Welded Clevis
- REPLACEMENT - Bendix NT3030ELSWC NT3030ELS-WC // Haldex GC3030LCW LC3030LCW // Freightliner HDX1373030215 // Automann 179.SB3030SLW225 // IHC 3541891C91 // Others BTS-3030LS-WCR GTA-3030LS-WCR
- SPECS - Actuator Type Size: 3030 // Stroke Type: Long // Available Stroke: 3" // Length from mounting bracket to end of Spring Housing: 9-7/8" // Length of Piggyback: 7-3/8" // Dimension at rolled Spring Housing flange: 8-5/16" // Dimension at Service Clampband: 10-3/16" // Pushrod Length from face of Service Housing: 1" // Distance to Clevis Pin centerline from face of Service Housing: 2-1/4" // Weight: 21.9 lbs.
- FEATURES - Combination with Welded Clevis Long Stroke Size 3030 Square Bosses // Superior Power Spring Technology; Advanced powder coating process; // Resists corrosion and fatigue // Double O-ring Centerseal; Two o-rings for positive sealing and plastic bearings for long life // World Class Diaphragm; High quality rubber compound, resistant to heat and cold // Self-piloting Dust Shield // Sizes to fit all drum brake applications
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- 2 Year Warranty
- Direct Replacement
- Quality Certificated
- Genuine Haldex Brake Chamber - SC20LCW
- Item Package Dimension: 8.59L x 8.39W x 8.39H inches
- Item Package Weight - 7.0 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- National Drivetrain
- Genuine Haldex Brake Chamber 30x30 - MID3030P76
- Item Package Dimension: 24.497L x 10.37W x 8.74H inches
- Item Package Weight - 22.0 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- TYPE - Air Brake Chamber Service Type 20 T20
- REPLACEMENT - Bendix K028225 801811 801812 5019641 509642 // Haldex SC20 SC20D 125200101 // MGM 1420001 1621-CS20L // TSE 20HSCND2-3630 20SCLD2H // Dayton 05-120 // Velvac 30017
- SPECS - Actuator Type Size: 20 // Stroke Type: Standard // Available Stroke: 2-1/4", 57mm // Length from mounting bracket to end of Spring Housing: 4", 102mm // Dimension at Service Clampband: 8-5/8", 218mm // Stud Spacing with 5/8-11 UNC studs: 4-3/4", 120.7mm // Pushrod Length from face of Service Housing: 10-3/16" // Pushrod threads 5/8"-18 UNF // Service Clampband position: 0 degree Air Port position: 90 degree Weight:7.5 lbs. , 3.4 kg.
- FEATURES - Steel Pressure Housing; Powder coated with resistance welded air ports // World Class Diaphragm; High quality rubber compound, resistant to heat and cold; Superior flexibility even at -40?F // Sturdy Service Housing; Powder coated for corrosion resistance; Step bottom with 12 gauge steel // Self-piloting Dust Shield
- WARRANTY - 1-Year Unlimited Mile Warranty - includes assurances about the quality of the item, as well as a promise to provide replacement if something goes wrong within a set amount of time.
- Excellent Quality - Enhances the longevity and reliability of your Air Brake Chamber, reducing maintenance costs.
- Easy to Install - OE standard design, can be completely replaced as a replacement part directly, Direct replacement for Bendix 165255 K049898 NT3030STD120 802547.
- Services - If you encounter any problems in daily use or any quality issues, please feel free to contact us, we will reply within 24 hours.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.