March 11, 2020 NHTSA CAMPAIGN NUMBER: 20V141000
Without the seatbelt warning reminder, the driver may forget to fasten the seatbelt, increasing the risk of injury in the event of a crash.
NHTSA Campaign Number: 20V141
Manufacturer Turtle Top
Components SEAT BELTS, ELECTRICAL SYSTEM
Potential Number of Units Affected 5
Turtle Top is recalling certain 2019 Turtle Top Odyssey vehicles built on GMC Savana and Chevrolet Express chassis. The seatbelt-unfastened warning light will not illuminate for approximately five seconds after the ignition is moved to the "on" or "start" position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Turtle Top will notify owners, and GM dealers will reprogram the instrument panel cluster, free of charge. The recall is expected to begin April 2020. Owners may contact Turtle Top customer service at 1-800-296-2105.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
2 Associated Documents
Non-Compliance Notice 573 Report
Latest Recalls Documents
Approved J2534 Device with TIS2WEB can reprogram 1996 and later All GM Modules.
To obtain the latest electronic controller calibration information for your vehicle, go to https://tis2web.service.gm.com/tis2web and enter the vehicle's 17 character Vehicle Identification Number (VIN) and select 'Get CAL ID’.
You can then compare the latest part number with the actual number installed on the vehicle to determine if a reprogram is needed.
The Service Programming System (SPS) application is part of the TIS2Web system. To program an ECU, the SPS application must communicate with the vehicle control modules using the proper J2534 programming interface tool.
The following are the supported interface tools:
The Tech 2 supports model years 1996 and beyond. With the addition of the CAN Diagnostic Interface (CANdi) module, Tech 2 is fully backward compatible with current Tech 2 functionality and operates transparently when diagnosing non-CAN-equipped vehicles.
Servicing the next generation Global A vehicles will require the diagnostic software, GDS2, Global Diagnostic System 2 running on a local PC device while the MDI is connected to the vehicle.
The GM MDI is the Global Diagnostic tool for future vehicles starting with Global A vehicles. The GM MDI was introduced in the fall of 2007 for Pass-Thru programming and offers faster programming speed. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and into the future. Click here to view a list of GDS supported vehicles.
- 【XP400 Programmer 】XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc. Please send VIN number to▲Autelonline @outlook.com▲ to check compatibility before purchasing.
- 【KEY PROGRAMMING Function】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly.
- 【IMMO & J2534 Reprogrammer】The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210 feet (70 m). You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash.【 Note: J2534 can't program ECU with the IM608】
- 【ECU CODING & ACTIVE TEST & 23 Services Function】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.
- 【No IP Lock & 1 Year Free Update + Life-long time tech-support】More langauage are available such as French, German, Italian, Polish, Dutch, Swedish, Korean, Japanese, Russian. Please contact by providing SN if needing authorized.
- 【SUPERIOR CODING & PROGRAMMING】 Supports coding and programming especially for BMW and Mercedes. With the VCI of MK908P for SAE J2534-1 and J2534-2 protocols, it can replace the existing software and firmware in ECU without expensive original equipment.
- 【WIDE DIAGNOSTIC SOLUTIONS】 Well capable of VCM coding and programming, TPMS coding, intelligent cruise control (ICC), ECU coding, live data, dashboard matching, airbag system reset, anti-theft key matching and more.
- 【POWERFUL DIAGNOSTIC TOOL】 The oscilloscope MP408 combine with MaxiCOM MK908P is able to measure and test virtually all the electrical and electronic components and circuits in any modern vehicles, providing you an insight to the inner workings of a vehicle’s electronic circuits.
- 【HIGH-EFFICIENCY OF USE】 Being MS908P upgraded, it is Autel’s latest and most sophisticated diagnostic scanner which boasts the best hardware including Hexa-CPU, 2GB RAM etc. for fast boot-up and multitasking, and the ergonomic design to resist damage of heavy use.
- 【WARRANTY & UPDATE】 You can get quality related services within 12 months warranty, besides, 12 months free online update is available for the latest bug fixes and newly added parameters and car models.
- 👍【SAME AS MK908P & BETTER TECH SUPPORT】 MS908S Pro has EXACTLY the same diagnostics and service functions as MK908P and Autel MaxiSys Elite. Unlike online product MK908P, MS908S Pro is a mature product that has been tested and approved by workshops across US!
- 👍【J-2534 ECU PROGRAMMING】Autel MaxiSys MS908S Pro is a professional automotive diagnostic scanner that utilizes powerful Cortex A7+A15 six-core processor that can perform OE level all systems diagnostics and various special functions. With J2534 ECU Programming Device included, it is capable of replacing the existing software & firmware and programming new ECUs(PCM, ECM) for specific BMW and Benz.
- 👍【25 SPECIAL FUNCTIONS FOR PROS】 Autel MS908S Pro is an advanced auto scan tools that can perform various special functions: Oil Reset, EPB reset, DPF Regen, ABS Bleed, SAS, Battery Registration, Injector Coding, Power Balance, Crankshaft Variation Learn and etc. NOTE: Special Functions are NOT universally compatible. Pls send VIN to 🚘[email protected]🚘 to check compatibility before purchase.
- 👍【EXTENSIVE VEHICLE COVERAGE】 MS908S Pro diagnostic scanner computer covers more than 80 US, Asian and European vehicle makes. The scan tool can work on most OBDII-compliant vehicles to locate check engine issues, 80+ makes and models to scan all available systems. For special functions, coverage varies across vehicles, please send VIN number to 🚘[email protected]🚘 to check compatibility first.
- 👍【HASSLE-FREE PURCHASE】 Autel MaxiSys MS908S Pro car scanner comes with 12 Months FREE software updates and services and is backed by Amazon 30 Day Return Policy. If there are any issues or concerns, please contact us directly via 🚘[email protected]🚘 for prompt tech support and best after-sales services! Purchase now to solve drivability issues, emission issues and save both time & money.
- 🌝[Vehicle Coverage] One device Compatible for Ford and Compatible for Mazda, Support vehicle till 2018 year. (Can't Support Ford F-150 ). Support Automatic Vehicle Recognition.
- 🌝[ECU Functions] Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.). Live Data-stream with Recording & Playback Functions for Main ECUs. New Software Re-flash for Existing ECUs.
- 🌝[Functional] Connect via USB. Support Read & Clear Diagnostic Trouble Codes (DTCs); Set, Adjust or Remove Speed Governors; Steering Angle Resets, Guided Fault Finding&All Other Dealer Functions.
- 🌝[Update] Update by CD with Unlocked Firmware. ★Please Note: If you have any problem when you install the software, please feel free to contact us, our technology team will provide customers service to help you solve the problem. Multilingual: Support English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil).
- 🚩Firmware support update online. If you have any problem, please fell free contact to us, we will help you fix it by TeamViewer or message support.
- OE-Level OBD Scanner: The diagnostic tool serves as the most advanced automotive diagnostic tool, comes with a J2534 ECU programming device that helps Benz and BMW users replace the existing software/firmware in the ECU, program new ECUs and fix software-controlled driving performance and emission issues. Welcom to contact [email protected] or ask through Q&A for your specific need and to ensure the vehicle compatibility
- All-system Diagnose & Active Test: Provided with full-systems diagnosis(ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). The diagnostic tool supports bi-direction control to check the vehicle operating conditions. The bi-directional control of the ECM in Component Test enables the MK908P to transmit control commands to operate the vehicle systems
- 30+ Service Functions: As the advanced version of MS908P,MS908S,MS908E, MS908PS PRO, MK908P also offers another 30+ service functions to help your repairing work faster, easier, and more professional, These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more
- Broad Compatibility: The software of MK908P has a wide range of compatibility and can be used to diagnose vehicles from over 80 brands in the US, Europe and Asia. Moreover, you can get more newly added car models with the fast-release software update service. The MaxiFix provides you with an online troubleshooter database, and Remote Desk allows you to get help from others via TeamViewer software
- With TS401 TPMS Relearn Tool: Since MK908P only supports basic detection functions for TPMS, so it is equipped with TS401, a powerful TPMS tire pressure reset tool, which can help you to program a sensor and do the Relearn procedure
- 👍【Works with Autel MK908, MS908, MK908P, MS908S Pro, MaxiSys Elite】Autel J2534 work with these scan tool to program ECUs on specific BMW and Benz vehicles. NOTE: To work with MK908, MS908 and etc scan tools to program ECUs, you need to have valid subscription to be able to download data from Autel server. For any issues, please contact 🚘[email protected]🚘 directly for satisfaction-guaranteed support!
- 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact 🚘[email protected]🚘 directly for satisfaction-guaranteed support!
- 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘[email protected]🚘 directly for satisfaction-guaranteed support!
- 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures quickly reprogramming even the newest controllers & Internet upgradable and updatable.
- 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘[email protected]🚘 to check compatibility before your order.
- 【XP400 Key Programmer for IMMO & VCI-J2534 Programming】: The XP400 is specially designed to read transponder data (including Mercedes Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, Freescale 9S12 MCUs. The J2534 is a fully compliant SAE J2534-1/J2534-2 device, specially designed to provide users with PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus and offer the most significant features by OEM Customers.
- 【Reliable Key Programmer & ECU Programming Tools】: Equipped with XP400 key programmer and MaxiFlash ECU re-programmer, this Autel scanner performs IMMO Add Key, All Key Lost and Key Learning for 3rd generation Benz. Besides convenient PC communication and ECU reprogramming capabilities from the MaxiFlash tool, it can read transponder data (including Mercedes Benz infrared smart key), clone/generate exclusive keys, etc. by working with the XP400 key programmer.
- 【All System Diagnostic & Advanced Maintenance Services】: Autel Diagnostics application can access the ECM of various vehicle control systems after VCI connection. The Maintenance Service covers Oil Reset/EPB/TPMS(sensor activate)/BMS/ABS(brake bleeding)/Aftertreatment/IMMO(advanced IMMO & key programming)/Injector/SAS/Suspension/Throttle/Win Dr Roof/Seats/Odometer/Lang Change/Headlamp/CHG tire size/TEC learn/SRS/Cylinder/VGT learn/Speed&PTO/Clutch/Trans adaption/Airbad reset/AF setting ...more
- 【Active Test & ECU Coding】: During an active test, the tester outputs commands to the ECU in order to drive the actuators. This test determines the integrity of the system or parts by reading the engine ECU data, or by monitoring the operation of the actuators, such as switching a solenoid, relay, or switch, betweentwo operating states. After repairs or replacements of vehicle parts, Autel IM608 can reprogram adaptive data for certain components of the test vehicle through ECU Coding.
- 【1 Year Warranty with 45Days Replacement & Free Software Updated】: One Year Free updated through Autel Update Application. The IM608 Tablet automatically searches for available updates for all of the MaxiIM components when it's connected to the Internet. 7*24hours Local Technical Support & Satisfaction Guarantee. So Click“Buy it now”and enjoy a high-quality product with confidence. (If you need to confirm your car model, pls message us: )
- 【KEY PROGRAMMING & IMMO Function Tool】The most advanced and smart key programming tool that combines the most powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet, it helps perform complete key programming quickly. Please send VIN number to▲Autelonline @outlook.com▲ to check compatibility before purchasing.
- 【XP400 Programmer & Powerful OE level】Powerful OE level diagnostics for more than 80 US, Asian and European makes and models. XP400 is to read transponder data (especially Benz infrared smart key), clone and generate exclusive keys, read/write on-board EEPROM data, etc. IMMO application provides Smart Mode and Expert Mode to guide technicians performing IMMO related functions, including Key Learning, Remote Control Learning, Remote Control Add, etc
- 【ADVANCED IMMO & J2534 VCI】The Wireless Diagnostic Interface supports two communication methods with the tablet: BT and USB. The working range for BT communication is about 210 feet (70 m). You can perform key programming and vehicle diagnosis on various vehicles conveniently, by pairing the tablet separately to each of the MaxiFlash. J2534 can't program ECU with IM608.
- 【ACTIVE TEST & ECU CODING & 23 Reset Services】Bi-directional control of the ECM is useful in determining whetherthe ECM responds to a command well. And Auto VIN Identification, ECU Coding are available for IM608. Most useful service including: Oil Reset Service/ EPB Service/ BMS Service/ SAS Service/ DPF Service etc.
- 【No IP Restriction & 1 Year Free Update + Life-long time tech-support】More langauage are available such as French, German, Italian, Polish, Dutch, Swedish, Korean, Japanese, Russian. Please contact by providing SN if needing authorized.
- 👍【36 Service Functions & Ultimate Scan Tool for Professionals】 Autel Elite Automotive Scanner as the toppest auto scan tool, can perform various services: ECU Programming, ECU coding, Bi-Directional Control, Oil Reset, EPB reset, DPF Regen, ABS Bleed, SAS, Battery Registration, Injector Coding, Power Balance, Crankshaft Variation Learn. NOTE: All Functions are NOT universally compatible. Please send VIN to 𝘼𝙪𝙩𝙚𝙡𝙐𝙎@𝙤𝙪𝙩𝙡𝙤𝙤𝙠.𝙘𝙤𝙢 to check compatibility before order.
- 👍【Advanced J2534 ECU PROGRAMMING】Autel Maxisys Elite Diagnostic tool comes with an SAE J2534-1 & -2 compliant Pass-Thru interface, which allows you to program ECUs for Benz/BMW. Also utilizes powerful NVIDIA 4-PLUS-1 Quad-core Processor, 1.8GHz with ARM Cortex–A15 CPU that can perform OE level all systems diagnostics. With J2534 ECU Programming Device included, it is capable of replacing the existing software & firmware and programming new ECUs(PCM, ECM) for specific BMW and Benz.
- 👍【Top 3X Fastest Hardware & MV108 Add-on】This Android 4. 4. 4 KitKat OS-based, tablet-style diagnostic scanner incorporates the world’s fastest mobile processor, with internal 2GB RAM (32GB SSD), for boosted performance (boot-up time < 20 sec). Also, Elite scan tool comes with a visually stunning sharp Retina display of 9. 7”, with an 8. 0-megapixel rear camera with flashlight and autofocus. It is bound to work 3x faster than any comparable device in the market.
- 👍【Full Bi-Directional Control & ECU Coding】 Bi-direction control of the ECM in the component test enables the Autel Elite to transmit control commands to operate the vehicle systems. ECU Coding allows you to update the computer software on the vehicle to the latest version, recede adaptive data for certain components after making repairs or replacements to improve driving performance, fuel efficiency and reduce power loss. [𝙏𝙝𝙚 𝙑𝙖𝙡𝙪𝙚 𝙤𝙛 𝙈𝙑𝟭𝟬𝟴 𝙎𝙘𝙤𝙥𝙚 𝙞𝙨 𝟱𝟵.𝟵𝟵$]
- 📞【 2 Year Free Software Updates & 1 Year Warranty & 30 Day Worry Free Refund】 𝙉𝙤𝙩𝙚: 𝙤𝙣𝙡𝙮 𝙖𝙫𝙖𝙞𝙡𝙖𝙗𝙡𝙚 𝙩𝙤 𝙨𝙚𝙡𝙡 𝙞𝙣 𝙩𝙝𝙚 𝙐.𝙎. 𝙍𝙚𝙜𝙞𝙤𝙣. It will be locked out if you bring to other countries. Support English & Spanish Language menu, backed by Autel’s professional tech support and service team via 𝘼𝙪𝙩𝙚𝙡𝙐𝙎@𝙤𝙪𝙩𝙡𝙤𝙤𝙠.𝙘𝙤𝙢. If you need to 𝙘𝙝𝙖𝙣𝙜𝙚 𝙩𝙝𝙚 𝙎𝙥𝙖𝙣𝙞𝙨𝙝 𝙈𝙚𝙣𝙪 or for any issues, please contact us directly.
Last update on 2021-01-12 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-01-12 / Affiliate links / Images from Amazon Product Advertising API