| “This site contains affiliate links for which OEMDTC may be compensated” |
February 26, 2020 NHTSA CAMPAIGN NUMBER: 20V113000
Warning Systems May Deactivate
If the exterior warning lights and stop sign indicator stop working, other drivers may inadvertently proceed driving before the school bus loading/unloading of students is complete, increasing the risk of an injury.
NHTSA Campaign Number: 20V113
Manufacturer Daimler Trucks North America LLC
Components EXTERIOR LIGHTING, OTHER
Potential Number of Units Affected 24,771
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2020 Thomas Built Buses Saf-T-Liner C2 school buses configured with a specific Switch Hub Module (part numbers 204803 and 216434) combined with a 500k Bulk Head Module and a certain 3-position momentary switch warning light package. The Switch Hub Module (SHM) that controls the exterior warning lights and stop sign may fail, resulting in deactivation of the red warning lights, stop sign and system indicator.
Remedy
DTNA will notify owners, and dealers will update the SHM, free of charge. The recall began April 15, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-844.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Recall Campaign
April 2020
FL844A
NHTSA#20V-113
Transport Canada #2020-078
Subject: TBB Saf-T-Liner C2 Warning Lights
Models Affected: Specific Thomas Built Buses Saf-T-Liner C2 school buses manufactured January 2, 2019, through February 13, 2020.
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Thomas Built Buses (TBB), has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.
There are approximately 3,600 vehicles involved in this campaign.
The warning lights and stop sign on buses with a specific combination of switch hub module, bulkhead module, and warning light switch may experience a communication issue, resulting in deactivation of the red warning lights, stop sign, and system indicator. If this happens, drivers may be incorrectly signaled to proceed before loading/unloading of students is complete, increasing the risk of personal injury.
The switch hub module software will be updated to correct the communication issue. Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions.
Replacement Parts
Replacement parts are not needed for this recall. The repair is a software update.
Removed Parts
Please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts.
Labor Allowance
Table 2 – Labor Allowance
| Campaign Number |
Procedure | Time Allowed (Hours) |
SRT Code | Corrective Action |
| FL844-A | Reprogram switch hub module to release 1.24 | 0.2 | 996-R199A | 12 – Repair Recall/Campaign |
Table 1
Claims for Credit
You will be reimbursed for your parts, labor, and handling by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL:
- Claim Type is Recall Campaign.
- In the Campaign field, enter the campaign number (FL844-A)
- In the Primary Failed Part field, enter 25-FL844-000.
- Enter nothing In the Parts section. No parts are needed for this repair, it is a software update.
- In the Labor section, enter the appropriate SRT from the Labor Allowance Table.
- The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
- U.S. and Canada – Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following:
- Accept the documentation of the previous repair.
- Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement.
- Submit a Recall Pre-Approval request for a decision and authorized amount.
- Submit a “based on” claim for the approved pre-approval.
- Attach the documentation to the pre-approval request.
- When your claim is paid, reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed.
If you have any questions or need additional information, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com / WSC.
To return excess kit inventory related to this campaign, U.S. dealers must submit a Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number.
A sample letter notifying vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days.
Copy of Notice to Owners
Subject: TBB Saf-T-Liner C2 Warning Lights
The U.S. notice is used for reference: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, Inc., has decided that a defect which relates to motor vehicle safety exists on specific Thomas Built Buses Saf-T-Liner C2 school buses manufactured January 2, 2019, through February 13, 2020.
The warning lights and stop sign on buses with a specific combination of switch hub module, bulkhead module, and warning light switch may experience a communication issue, resulting in deactivation of the red warning lights, stop sign, and system indicator. If this happens, drivers may be incorrectly signaled to proceed before loading/unloading of students is complete, increasing the risk of personal injury.
The switch hub module software will be updated to correct the communication issue.
To arrange for repairs, you should contact your local Thomas Built Buses dealer immediately. The repair should take approximately half an hour and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/get VinLookupPage.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m to 4:00 p.pm, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
THOMAS BUILT BUSES WARRANTY DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your Thomas Built Buses authorized dealer concerning this matter.
Work Instructions
Subject: TBB Saf-T-Liner C2 Warning Lights
Models Affected: Specific Thomas Built Buses Saf-T-Liner C2 school buses manufactured January 2, 2019, through February 13, 2020.
Switch Hub Module Reprogramming
DOWNLOAD FILE (Before Beginning the Recall on the First Bus)
- On the computer(s) to be used for this procedure, use the link below to go to the file needed on the Thomas Dealer Portal:
https://www.thomasbusonline.com/mytbb/Manuals_Recalls.aspx
After logging in, click on the indicated file, see Figure 1:
- Save 24.exe to the desktop of the computer. An icon will appear on the desktop. See Figure 2.
REPROGRAM SWITCH HUB MODULE
- Park the vehicle on a level surface, turn the key completely off, put the bus in Park, and set the parking brake. Chock the tires.
- Open the file (click the icon on the desktop).
- Select Configure Driver (must be done each time the software is opened). See Figure 3.
- Click Select in the RP1210B Setup dialog box, then choose the device from the list that matches your tool. See Figure 4.
- The tool/device name will show in the first field. Check the Override Device Defaults box, change the baud rate from 250000 to 500000, then click OK. See Figure 5.
- Connect the diagnostic tool to the 9-pin connector.
- Turn the ignition to the On position, the engine does not need to be running.
- Click Read Software Version to confirm the connection to the bus and the current software level, for example, 1.23 or 1.22 will be displayed in the SHM: field. See Figure 6.
- Click Program 01.24. Programming will start. Progress will be shown in the Programming Status When complete, 100% will be shown and a message confirming success will be displayed. If you get an error message, select Program 01.24 again to restart. See Figure 7.
- Turn the ignition to “Off.”
- Disconnect the diagnostic tool from the 9-pin connector.
- Remove the chocks from the tires.
Memorandum
To: All TBB Dealers
From: Michael Stotler
Date: 4/13/2020
Re: Information regarding recall FL844 SHM reprogramming
Recall FL844 SHM reprogramming release
The recall will be released onto DTNA Connect on 4/8/2020. I want to thank all of the dealers that reacted quickly to address this issue and get many of these done prior to the official release, due to the importance of this recall. Since we first announced this pending recall, allot of work was still taking place behind the scenes, mainly to identify the cause of the issue. When we first reported this problem to the dealer network, we had over 26,000 buses in the population. We did not know the root cause and “erred on the side of caution”. We have since been able to narrow the population down to just over 6,000 buses. The buses in the population that will require the programing were built 1/2/2019 to 2/13/2020.
Important: For units that have already been reprogrammed ahead of the release, using the original lists sent to you, please create a list of those units and provide them to your dealer manager. You will be reimbursed via policy for those units. The campaign will be open to accepting claims for units on the official population list beginning 04/8/2020. Remember that the claim repair date cannot be earlier than 04/8/2020 or the claim will be rejected by the system.
SHM Program
FL844 draft
2/26/2020
Switch Hub Module will need to be programmed with 1.24 software level. To program a SHM you will need the file located on the Thomas Built Dealer Portal under the section Documents/Reporting tools and then Recall Documents and inside the folder labeled downloads.
Once the file is saved to your desktop you will see this icon
- Open the file
- Each time you open the software you will need to set the configure driver
Select Configure driver
You will need to hit select to choose your adaptor tool driver such as Nexiq USB
The tool will show in the first line. Then select override device defaults box and change the rate from 250000 to 500000 and click ok
You are now ready to program a bus
- Connect your diagnostic tool to the 9 pin connector
- Turn ignition to on position, you do not need the engine running to program
- Click read software version to ensure you are connected to the bus and the current level example 1.23 or 1.22 will be displayed to the right of the box
- Click Program 01.24 and the software will initialize and display the status in the programming status area on the screen. If you get an error that programming failed select program button again to restart. Once complete it will show 100% and provide a message the programing was successful
Programing should take less than 1 minute
- Turn the ignition switch off and disconnect your tool from the diagnostic connector. If programing other buses leave the program open and complete process again starting at step 3
SHM
Key Talking Points
Introduction: The purpose of this call is to communicate an important customer service development concerning the operation of the electrical system in certain Thomas school buses. Our communication will be specific and at this time we will not be able to elaborate or take any additional questions. We realize that there will be many questions but it is imperative that we follow specific NHTSA guidelines. Please keep this information confidential at this time. We do commit to further communication and will do so at the appropriate times and with the appropriate methods. Thank you for your understanding. Here are the key points of our message:
- Thomas Built Buses will be issuing a recall on school buses with selected warning light packages.
- This will impact approximately 27K C2 school buses.
- This recall is being issued with an abundance of caution, while the failure may never happen, the failure when exhibited is as follows: On the affected school buses the switch hub module (SHM) controlling the exterior warning lights and stop sign may experience a communication issue resulting in deactivation of the red warning lights and stop sign.
- All buses with affected warning packages will receive software updates, a procedure that will take less than 10 minutes.
- The software update is available at this time and instructions will be forthcoming on how you can access it. Each affected dealership will receive an email with their VINs and instructions for downloading the software.
- Buses can continue to operate until the repair is completed. This is the verbiage on the 573 report.
(4)(m) Precaution(s) to be taken Prior to Corrective Measures Implementation: Watch for unexpected change of working system indicator and/or movement of signage and crossing arm. Pressing the momentary activation switch will turn the warning lights back on and deploy the stop sign.
RECALL LETTER INFO
- Registered owners will receive communications per the standard recall methodology
HOLD INFO
- All units ready for pickup at TBB are off hold.
That’s what I have to communicate today. I understand that it’s not a pleasant message and I understand that it comes pretty quickly on the heels of another significant one. What I will communicate is that we’ll quickly have information to you and it will be our top priority in the coming weeks.
We thank you again for your understanding and ask for your cooperation with our request for confidentiality. We anticipate NHTSA posting the recall data to their website in the immediate future and wanted to make sure you are aware of this prior to hearing from owners. We do understand that there will be many questions and we will address them at the appropriate time. Thank you for your time today.
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-844
Date of Submission: April 15, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2020 Model Yr. End: 2021
Make: Thomas Built Buses
Model: Saf-T-Liner C2
Production Dates: Begin: 01/02/2019 End: 02/13/2020
Descriptive Information:
School Buses configured with a specific Switch Hub Module (P/N: 204803 and 216434) combined with a
500k Bulk Head Module and certain 3-position momentary switch warning light packages
Number potentially involved: 6,010 Estimated percentage of involve with defect: 5%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On the affected school buses the switch hub module (SHM) controlling the exterior warning lights and
stop sign may experience a communication issue resulting in deactivation of the red warning lights, stop
sign, and system indicator.
Describe the safety risk:
If the red exterior warning lights stop flashing, and the stop sign retracts, other drivers may be
incorrectly signaled to stop driving before the school bus loading/unloading of students is complete
therefore increasing the risk to injury.
If applicable, identify the manufacture of the defective or noncompliant component.
John Deere Electronic Solutions
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
January 2020, DTNA received a dealer report concerning a specific exterior warning light option package
working intermittently. DTNA began inspecting school buses at the School Bus Plant. The plant inspection
of 25 vehicles revealed four vehicles had exterior warning lights turning off without additional driver
input after operating continuously for an extended period of time. An inspection conducted by the dealer
of 98 school buses revealed 53 school buses reporting a similar issue. February 2020, DTNA received an
additional dealer report of a school bus exhibiting a similar issue manufactured prior to the parameter
update. February 20, 2020 DTNA with an abundance of caution, decided to conduct a voluntary recall
campaign on school buses equipped with the above configuration. February 2020 – April 2020, DTNA
conducted an in-depth analysis of warranty and test data in conjunction with the SHM supplier. Findings
indicated there were no warranty claims, reports from the field or testing that indicated the issue was
present prior to Jan 2019. April 2020, DTNA amends the 573 defect report to modify the start date of the
recall population to January 2, 2019. No incidents have been reported in the field. Only in unique
circumstances could the issue be replicated.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.:
The software in the SHM will be updated — Repairs will be performed by Daimler Trucks North America
authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification
letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date: 04/25/2020
Planned Dealer Notification End Date: 04/25/2020
Planned Owner Notification Begin Date: 04/25/2020
Planned Owner Notification End Date: 04/25/2020
Manufacture’s identification code for this recall (if applicable): FL-844
DTNA Representative;
Andy Jones
Manager
Compliance and Regulatory Affairs
4 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| THOMAS BUILT BUSES | SAF-T-LINER C2 | 2017-2020 |
14 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-20V113-2249.pdf 53.682KB
Loading...
Reload document 
Open in new tab
Recall 573 Report- Amendment 1
RCLRPT-20V113-7383.PDF 213.852KB
Loading...
Remedy Instructions and TSB
RCRIT-20V113-3257.pdf 269.83KB
Loading...
Miscellaneous Document
RMISC-20V113-5251.pdf 903.44KB
Loading...
Miscellaneous Document
RMISC-20V113-6893.pdf 299.201KB
Loading...
Recall Acknowledgement
RCAK-20V113-3835.pdf 244.966KB
Loading...
Miscellaneous Document- Key talking points – Warning Light
RMISC-20V113-9319.pdf 140.031KB
Loading...
Miscellaneous Document- Email to Dealer
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V113-7765.pdf 111.215KB
Loading...
Defect Notice 573 Report
RCLRPT-20V113-3132.PDF 212.93KB
Loading...
Miscellaneous Document- Defect Information Report
RMISC-20V113-2636.pdf 460.777KB
Loading...
Recall Quarterly Report #3, 2020-4
RCLQRT-20V113-3860.PDF 211.327KB
Loading...
Recall Quarterly Report #1, 2020-2
RCLQRT-20V113-7236.PDF 211.139KB
Loading...
Recall Quarterly Report #2, 2020-3
RCLQRT-20V113-7355.PDF 211.242KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V113&docType=RCL
Heavy Duty Truck Reprogramming
Description:
Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.
Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.
The USB-Link™ 3 comes with the following:
- Latching USB Cable (PN 404032)
- 9-Pin Deutsch Adapter, 1 Meter (PN 493128)
- J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)
The USB-Link™ 3: Wireless is also available (PN 121052).
Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1708
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud
Windows® Vehicle Communication API
Windows® Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)
Operating System Compatibility
iOS
Android™
Windows® 10, 11
Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetooth® 2.1 + EDR
Wi-Fi (dual band)
Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
VCAD Elite Mack/Volvo
V-MAC Service Tools
Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International ABS
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4
 |
Diesel Laptops Nexiq USB Link 3 Wireless Edition with Repair Information & Diagnostic Software |
|
Diesel Laptops Nexiq USB Link 3 Wired Edition with Repair Information & Diagnostic Software |
|
Nexiq Blue-Link Mini Product Number NQ126015 Nexiq Blue Link Mini™ Vehicle Communication Interface |
|
NEXIQ Technologies 124032 USB-Link 2 Connector |
|
Dearborn DPA5 Pro Universal RP1210 Protocol Adapter |
Daimler Truck
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test; ✅Advanced ECU Coding;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen, Injector Coding,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems.Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚜ADVANCED ECU CODING & PROGRAMMING:ANCEL V5 HD diesel truck scan tool comes with a powerful ECU programming and coding function, allowing you to reprogramme and decode the electronic control units (ECUs) of the vehicle.This feature is especially useful for technicians who need to update software,adjust parameters,or perform other modifications to the vehicle's electronic systems.🚦Note: ECU Coding is not universal to all cars, please check compatibility with VIN before order.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🌟【Run Your DPF Cleaner, Longer -Renew, Don't Replace!】Safeguard your truck from breakdowns and and high repair costs with focused DPF care. Opt for HD3400, featuring DPF regen, reset, DPR state control, and more, tailored for engines like Cummins, Detroit, Caterpillar, etc. Imagine this: easy and cost-effective DPF regen saving you from potential $10,000 to $30,000 in repairs. Unlock compliance-free operation for improved fuel efficiency, extended engine life, and significant cost savings
- 🚜【Maximize Caterpillar Engine Trucks' Potential!】HD3400 Plus diesel scanner, exclusively for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more) commonly found in trucks like Caterpillar, Ford Pick-up, Freightliner, Peterbilt, Kenworth. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration and more. Unleash your Caterpillar engine's power!
- 🚛【Designed for Detroit Engine Trucks】ANCEL HD3400 heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks – class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7.
- 🚐【Designed for Paccar Engine Trucks】ANCEL HD3400 heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13. ❗Note: PACCAR engines post-2016 require a CAN-3 adapter for forced DPF regeneration. If you want to perform DPF regen for your PACCAR engines manufactured after 2016, please find us to get the additional CAN-3 adapter.
- 🌟【Unlock Advanced DPF Regeneration】Our diesel scanner diagnostic tool excels in DPF reset, providing active/forced regeneration and advanced DPF state control. Save time and money on DPF maintenance, making it the top choice for truck diagnostics. Elevate your DPF maintenance with our advanced features!
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.