CSN 672 – Leveling Yoke Inspection – 1997-2017 Altec LRV & LR7 Aerial Devices

February 14, 2018

Platform Leveling Yoke Failure

Failure of the platform leveling yoke can cause the occupant of the platform to fall out, increasing their risk of injury.

 

NHTSA Campaign Number: 18V110

Manufacturer Altec Industries Inc.

Components EQUIPMENT

Potential Number of Units Affected 18,000

 

Summary

Altec Industries Inc. (Altec) is recalling certain 1997-2017 LRV, and LR7 Aerial devices. The platform leveling yoke may fail, possibly causing an occupant to fall from the platform.

 

Remedy

Altec will notify owners, and will inspect the leveling system to verify the correct alignment, replacing any improperly aligned yokes, free of charge. The recall began on April 11, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec’s number for this recall is CSN 672.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

---

IMPORTANT SAFETY RECALL

This notice applies to your vehicle. See attached serial number list.

NHTSA Safety Recall
No. 18V-110

April 5, 2018

Dear Altec Owner,

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act, and Canada Motor Vehicle Safety Act.

Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in certain LRV and LR7 Units. These units have a yoke in the platform leveling system that can fail. If the yoke fails, the plaform occupant can fall resulting in death or serious injury.

Refer to CSN 672 for the items covered under the warranty policy. Altec will supply, free of charge, a replacement yoke to correct this condition.

In order to determine if your unit is affected by CSN 672, compare the serial number of your unit with the list of affected units attached to the CSN. The repair can be performed by the customer or you may contact Altec at 1-877-GO-ALTEC (1-877-462-5832) for further assistance. The repair is expected to take two hours to complete.

At any time, you may contact Altec at 1-877 GO ALTEC (1-877-462-5832) with your unit’s serial number to determine if there are any other outstanding notices.

For US owners: after contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or  go to https://www.safercar.gov.

For Canadian Owners: if you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec Customer Service at 1-877-GO-ALTEC (1-877-4625832).

If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. If you have sold or retired the unit please call Altec at 1-877-GO-ALTEC (1-877-4625832) so the records may be changed.

If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice.

We are sorry to cause this inconvenience; however we are taking this action in the interest of your safety and continued satisfaction with Altec products.

Thank you for your immediate attention on this important matter.

---

Customer Service Notice

Date: April 5,  2018

Units Affected: All LRV units and LR7 units built before January 2018 (units with serial numbers beginning with 0118). This does NOT include units with platform rotator.

Leveling Yoke Inspection

Altec is committed to providing our customers with safe and reliable products from initial delivery throughout the useful life of the machine.

The LRV and LR7 Series aerial devices feature a mechanical, rod-and-chain leveling system to hold the platform level as the boom moves during operation. A chain sprocket at the end of the lower boom is connected to a threaded yoke (see Figure 1). The yoke is adjustable to allow for proper sprocket alignment due to the slight variations in the leveling system assembly.  The threaded portion of the yoke is long enough that improper adjustment  to under the minimum allowable range is possible.

There have been a few field reports of improperly adjusted leveling yokes failing.  Failure of the leveling yoke and the leveling system can increase the risk of the occupant falling from the platform. Death or serious injury can result if occupant is not wearing required fall protection equipment.

Altec requires that customers to perform the following actions.

• Use the procedure beginning on Page 2 to measure the leveling system yoke length atthe next preventive maintenance inspection, but no later than 90 days after the receipt of this CSN.
• Select and order the correct yoke kit for the unit from the inspections results table onPage 3 ONLY if the length of the yoke adjustment is NOT within specifications. Schedule the yoke repair within 30 days after receiving the kit.
• Install the warning placard provided with this mailing on the unit. Stick a label providedwith this mailing in the operator’s and in the maintenance manual. Order additional placards or labels using the part numbers from the inspections results table on Page 3.

This repair is covered under the Altec Warranty Policy and can be performed by Altec, the customer, or the customer’s warranty provider. Altec will perform the repair for free.  If the customer, or the customer’s warranty provider performs the repair, a warranty claim must be submitted to be reimbursed for the cost of the parts and/or labor. Altec will allow up to $180 for the labor to perform this repair. There is no warranty reimbursement for the inspection.Call 1-877-GO ALTEC (1-877-462-5832) to schedule the work to be done by an Altec service technician. Customers are responsible for the travel costs of an Altec Mobile Service technician if the technician performs the inspection or repair at the owner’s location.

---

21 Affected Products

Vehicle

MAKE	MODEL	YEAR
ALTEC	AERIAL DEVICE	1997-2017

 

---

7 Associated Documents

ISSUED Owner Notification Letter(Part 577)

RCONL-18V110-5476.pdf 305.895KB

 

---

Recall Acknowledgement

RCAK-18V110-4362.pdf 299.807KB

 

---

Recall 573 Report

RCLRPT-18V110-6088.PDF 214.492KB

 

---

Recall 573 Report

RCLRPT-18V110-1268.PDF 214.492KB

 

---

Recall Quarterly Report #2, 2018-3

RCLQRT-18V110-8302.PDF 214.61KB

 

---

Recall Quarterly Report #3, 2018-4

RCLQRT-18V110-3902.PDF 211.32KB

 

---

Recall Quarterly Report #4, 2019-1

RCLQRT-18V110-7745.PDF 211.428KB

 

---

Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V110&docType=RCL

---