Headlamp Relay May Disconnect from Fuse Box – 2015-2020 Autocar Xspotter

“This site contains affiliate links for which OEMDTC may be compensated”

December 27, 2019 NHTSA CAMPAIGN NUMBER: 19V922000

Headlamp Relay May Disconnect from Fuse Box

Headlights failing can cause reduced visibility, increasing the risk of a crash.

 

NHTSA Campaign Number: 19V922

Manufacturer Autocar, LLC

Components ELECTRICAL SYSTEM, EXTERIOR LIGHTING

Potential Number of Units Affected 3,448

 

Summary

Autocar, LLC (Autocar) is recalling certain 2015-2020 Xspotter vehicles. The headlamp relay may disconnect from the fuse box, causing the headlights to shut off.

 

Remedy

Autocar will notify owners, and dealers will install a fuse box relay retainer, free of charge. Autocar issued owners an interim notification on February 24, 2020. The recall began August 27, 2020. Owners may contact Autocar customer service at 1-888-218-3611 or 1-877-973-3486. Autocar’s number for this recall is ACTT-2002.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


Autocar
Autocar

 


SAFETY RECALL BULLETIN

NHTSA RECALL 19V922

AUTOCAR, LLC SAFETY RECALL ACTT-2002

August, 2020

 

Attention:

Service Managers/Parts Managers Subject:

Autocar has determined that relays located in the cab fuse box may become disconnected on certain Xspotter 2014-2020 model-year vehicles, resulting in the malfunctioning of the head lamps.

 

Safety Recall Information:

This document provides work instructions for the installation of a ribbed retainer plate inside the cab fuse box.

 

Vehicles Affected:

There are 3448 vehicles affected, manufactured after March 25, 2014. To determine if a vehicle is affected by this recall, log in to the Autocar Warranty

Management System at www.autocartruck. com. From the main menu, select “View Recalls/Service Programs” and look for the Autocar recall number above. An excel file will be accessible with the VIN list of affected vehicles. Alternatively, to determine if a single vehicle is affected, select “VIN Profile” from the main menu. In the “Chassis Number” field, enter the last 6 of the VIN. Once the VIN profile is displayed, scroll down to the “Recall/Service Program Information” section to determine if the recall is open.

 

Service Responsibility:

Service sites must perform this recall on affected vehicles at no charge to the owner regardless of vehicle mileage, age or ownership. If a vehicle affected by this recall is taken into or is currently in your vehicle inventory, or at your center for service, you must perform this recall before the vehicle is sold or released to the owner.

 

Required Parts:

(1) S8705000K001 Service kit
(1) A8701012-001 Ribbed retainer plate

 

To Obtain Parts:

DO NOT submit a Solutions ticket. Ensure that you have authorization from the customer to perform this work, and send an e-mail to: warranty@autocartruck.com and include the following:

  • VIN(s) or last 6 digits of VIN(s)
  • ‘Attention To’ name
  • ‘Ship To’ address

 

Claims for Reimbursement:

Submit a claim for reimbursement in accordance with Autocar’s Warranty Administration Manual.

 

Claim Coding Information:

Labor Operation Code Number Time Allowance SRT Description
16.5.3 .50 HR Ribbed Retainer Plate Install

 

Tools Required:

N/A

 

SAFETY NOTICES:

WARNING

Allow the vehicle’s engine and cooling system to cool to ambient temperature before performing the repair procedure.  A hot engine or cooling assembly may cause burns or other personal injury.

WARNING

To prevent eye injury, always wear eye protection when performing vehicle maintenance, service or inspection.

WARNING

Before working on a vehicle, set the parking brake,  place the transmission in neutral and block the wheels.  Failure to do so can result in unexpected vehicle movement and can cause serious personal injury or death.

 

Working on CNG/LNG Trucks

SAFETY INSTRUCTIONS

If you store or dispense Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG), or if you work on CNG or LNG trucks, your location must be fully compliant with applicable codes, regulations and standards, including National Fire Protection Associate (NFPA) codes, Society of Automotive Engineers (SAE) standards, American National Standards Institute (ANSI) Natural Gas Vehicle (NGV) standards, the United States Code of Federal Regulations (CFR) and your state and local fire and other applicable codes (including, for example, the California Code of Regulations and the Texas Administrative Code).

Contact your local fire department for guidance and additional compliance information.

Technicians working on Autocar trucks with CNG or LNG engines must be trained in the proper repair of CNG and LNG trucks and engines and the safe storage and dispensing of CNG and LNG.

 

Working on CNG Fuel Systems

WARNING

CNG fuel systems include a high pressure (3600 psi) system for fuel storage and a low pressure system (125 psi) for consumption by the engine.  Understanding the characteristics of CNG and how the fuel system works will prevent injury and damage to persons and property.

Attempting to operate or maintain any CNG fuel system without proper training is dangerous. Complete training and consult instructional bulletins from the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Safely Working on CNG Fuel Systems.

Welding and Hot Work Near CNG and LNG Trucks.

WARNING

Welding, grinding and other “hot work” can be safely performed on or near a CNG or LNG vehicle, but certain precautions must be followed.  Understand and perform the necessary precautions provided by the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Welding and Hot Work Precautions Near CNG and LNG Vehicles.

 

CNG Cylinders

WARNING

CNG fuel containers must meet Federal Motor Vehicle Safety Standard (FMVSS) 304 (Compressed Natural Gas Fuel Container Integrity) and/or ANSI/CSA NGV2 (Basic

Requirements for Compressed Natural Gas Vehicle Fuel Containers).  Both standards specify a detailed visual examination every three years.

Ensure that every truck owner completes the required inspections, in accordance with the applicable standards and other resources, such as the Clean Vehicle Education Foundation and NGVAmerica’s Compressed Natural Gas (CNG) Container Visual Inspection Advisory.

FMVSS 304 also requires that cylinders not be used after the end of life (EOL) date provided on the tank label.  The EOL date is also displayed in the engine compartment and at the fueling connection of each truck.  If there is any question as to proper decommissioning of a cylinder, contact the manufacturer, whose name and address is also required to be on the label.

 

CNG Fuel Container Pressure Relief Devices (PRDs)

WARNING

PRDs must be properly maintained and positioned for safe operation of a CNG fuel system.  Missing vent caps can allow moisture into PRDs and vent lines, which can freeze and damage these safety components.  Debris which clogs the PRDs and/or vent lines can prevent proper function.

PRDs must be positioned to vent upward, not outward, from a vehicle.

Ensure that every truck owner completes periodic inspections of the PRDs and vent lines and systems, in accordance with guidance provided by the system component suppliers.

 

Alert First Responders to CNG and LNG

DANGER

In the event of a fire or other emergency, alert first responders to the presence and location of CNG fuel systems, tanks and dispensers. Ensure that emergency personnel are aware of proper precautions, such as those provided in Agility’s First Responder Guide: CNG and LNG Vehicle Fuel Systems.

 

CAUTION

LOCKOUT/TAGOUT PROCEDURES

Before entering the vehicle or vehicle body, read and follow OSHA regulations concerning entry and working in “CONFINED SPACE” OSHA 1910.146 and “LOCKOUT/TAGOUT” OSHA 1910.147. Follow OSHA regulations while performing any work on the vehicle. The vehicle must be disabled by the following steps before performing any work on the vehicle:

  1. Place the transmission in NEUTRAL.
  2. Set the parking brake.
  3. Shut the engine OFF.
  4. Lock cab doors, keep the key in your pocket. Block the wheels before entering the body or performing any work on the vehicle.
  5. Turn the battery disconnect switch OFF, if equipped.
  6. Completely drain the air from the primary/A system and secondary/B system by opening the drain valves on the air tanks themselves or by using the drain manifold if supplied. When draining the air tanks, do not look into the area where air is draining. Dirt or sludge particles may be expelled in the air stream and can cause eye injury.
  7. Place magnetic “DANGER” signs on both cab doors before entering the body or performing any work on the vehicle.
  8. Take proper precautions before working under the vehicle. Use ramps approved for the weight of your vehicle, or use floor jacks and stands. Never work under a vehicle supported by jacks alone. Always use jack stands to support the vehicle.

 

 

INSTALLATION OF RIBBED

RETAINER PLATE INSIDE CAB FUSE BOX

  1. Locate the cab fuse box (see Figure 1).
  2. Remove the cover from the cab fuse box (see Figure 2).
  3. Peel off the protective backing from the ribbed retainer plate (A8701012- 001), exposing the adhesive.
  4. Press the ribbed retainer plate onto the inside top of the fuse box cover. The tall rib should be over relay not fuses (see Figure 3).
  5. Replace the fuse box cover.
  6. Installation of retainer plate is complete.

 


IMPORTANT SAFETY RECALL

This notice applies to your vehicle(s) with the VIN(s) indicated on the enclosed owner response cards.

 

AUTOCAR, LLC SAFETY RECALL ACTT-2002
NHTSA RECALL NO. 19V922

August 2020

 

Dear Autocar Truck Owner:

This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3448, 2015-2020 model year Xspotter chassis. These chassis were manufactured between March 25, 2014 and August 6, 2019 with non-sequential serial numbers in the range of 217590 through 231570. Our records indicate that your vehicle was manufactured within this time period and may contain the defect described herein.

MODELS
AFFECTED:
Autocar Xpotter MY 2015-2020
 COMPONENTS AFFECTED:  The headlamp relay can become disconnected.
 SAFETY DEFECTS AND POTENTIAL RISKS:  If the headlamp relay becomes disconnected during nighttime operation there will be a sudden loss of headlamps, which could result in property damage, personal injury or a crash.                                              
REPAIR
REQUIRED:
  A fuse box relay retainer will be installed at no charge.
TIME REQUIRED
FOR THE REPAIR:
The labor time to repair your vehicle is .50 hours.
WHAT YOU
SHOULD DO:
To have your vehicle repaired, contact your local authorized Autocar service site or email    warranty@autocartruck.com
PRIOR REPAIRS: If you previously paid for a repair that addresses the recall described in this notice, you may be eligible for a refund. To verify eligibility and learn how to request a refund, please contact Autocar’s Service & Warranties Department, at the following address:

Autocar LLC
Service & Warranties Department
551 S. Washington St.
Hagerstown, Indiana 47346

In addition owners may contact Autocar by telephone (toll free) at 888-218-3611 or 877973-3486

NOTICE
REGARDING
LEASED
VEHICLES:
If you are a Lessor (as defined below) of a vehicle affected by this notice, you are obligated under federal law to provide a copy of this Notice to the lessee of such vehicle  within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the lessee(s) to whom you send a copy of this Notice, the date you send the Notice and the VIN of the vehicle that you have leased to the lessee(s).

For purposes of this Notice, the term “Lessor” means a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the date of this Notice.

OWNER RECALL
RESPONSE CARD:
The enclosed Owner Recall Response Card identifies your vehicle.   Please complete this postage-paid card and return it to Autocar.  If you do not own, have sold or have traded the vehicle identified on the card, please indicate that on the postage-paid card and return it to Autocar.
ASSISTANCE If you need assistance with this recall, call our toll-free numbers below or write to Autocar at:

Autocar LLC
Service & Warranties Department
551 S. Washington St.
Hagerstown, Indiana 47346

In addition owners may contact Autocar by telephone (toll free) at 888-218-3611 or 877973-3486

You may also submit a complaint to:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue
SE Washington, DC 20590

or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.

 

We regret any inconvenience this recall may cause, but we hope you recognize Autocar’s concern for your safety and satisfaction with your vehicle.

 

Sincerely,

 

AUTOCAR, LLC

ACF 00002 Rev. 000

551 South Washington Street, Hagerstown, IN  47346 – Office: 765.489.5499 – Fax: 765.489.5230

 


IMPORTANT SAFETY RECALL

This notice applies to your vehicle(s) with the VIN(s) indicated on the enclosed owner response cards.

AUTOCAR, LLC SAFETY RECALL ACTT-2002
NHTSA RECALL NO. 19V922

February 2020

Dear Autocar Truck Owner:

This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3448, 2015-2020 model year Xspotter chassis. These chassis were manufactured between March 25, 2014 and August 6, 201 9 with non-sequential serial numbers in the range of 217590 through 231570. Our records indicate that your vehicle was manufactured within this time period and may contain the defect described herein.

MODELS
AFFECTED:
Autocar Xspotter MY 2015-2020
COMPONENTS AFFECTED: The headlamp relay can become disconnected.
SAFETY DEFECTS
AND POTENTIAL
RISKS:
If the headlamp relay becomes disconnected during nighttime operation there will be a sudden loss of headlamps, which could result in property damage, personal injury or a crash.
REPAIR
REQUIRED:
A fuse box relay retainer will be installed at no charge.
TIME REQUIRED
FOR THE REPAIR:
The labor time to repair your vehicle is .10 hour.
WHAT YOU
SHOULD DO:
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming recall to correct the issue noted above. The parts required for the repair are being procured and we expect to have components available within the next 60 days. You may continue to operate your vehicle. The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your local authorized Autocar service site or email warranty@autocartruck.com. If you have questions or concerns regarding this notification, please contact Autocar technical support at 888-218-3611.
PRIOR REPAIRS: If you have previously paid for repairs relating to this recall you may be entitled to recover the amount you paid for those repairs. Submit a copy of all documentation supporting your claim to Autocar at the address set forth below in the “Assistance” section.
NOTICE
REGARDING LEASED
VEH!CLES:
If you are a Lessor (as defined below) of a vehicle affected by this notice, you are obligated under federal law to provide a copy of this Notice to the lessee of such vehicle within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the lessee(s) to whom you send a copy of this Notice, the date you send the Notice and the VIN of the vehicle that you have leased to the lessee(s).

For purposes of this Notice, the term “Lessor” means a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the date of this Notice.

OWNER RECALL
RESPONSE CARD:
The enclosed Owner Recall Response Card identifies your vehicle. Please complete this postage-paid card and return it to Autocar. If you do not own, have sold or have traded the vehicle identified on the card, please indicate that on the postage-paid card and return it to Autocar.
ASSISTANCE If you need assistance with this recall, call our toll-free numbers below or write to Autocar at:

Autocar, LLC
Service & Warranty Departments
551 S. Washington St.
Hagerstown, Indiana
47346
888-218-361 1 (Toll Free)
877-973-3486 (Toll Free)

You may also submit a complaint

to: Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue
SE Washington, DC
20590

or call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.

 

We regret any inconvenience this recall may cause, but we hope you recognize Autocar’s concern for your safety and satisfaction with your vehicle.

Sincerely,

AUTOCAR, LLC

 

ACF 00002 Rev. 000

 

551 South Washington Street, Hagerstown, IN 47346 – Office: 765.489.5499 – Fax: 765.489.5230

 


IMPORTANT SAFETY RECALL

 

AUTOCAR, LLC SAFETY RECALL ACTT-2002
NHTSA RECALL NO. 19V922

August 2020

 

TO: U.S. Distributors
Dealer Principals, Service Managers, Warranty Managers, Parts Managers

 

This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 3448, 2015-2020 model year Xspotter chassis. These chassis were manufactured between March 25, 2014 and August 6, 2019 with non-sequential serial numbers in the range of 217590 through 231570. Accordingly, a recall to address this issue is being initiated effective August 27, 2020.

MODELS
AFFECTED:
Autocar Xpotter MY 2015-2020
COMPONENTS
AFFECTED:
The headlamp relay can become disconnected.
SAFETY DEFECTS
AND POTENTIAL
RISKS:
If the headlamp relay becomes disconnected during nighttime operation there will be a sudden loss of headlamps, which could result in property damage, personal injury or a crash.
REPAIR REQUIRED: A fuse box relay retainer will be installed at no charge to the owner.
REPAIR AVAILABLE: VIN profiles in the Autocar Warranty System will be updated to show the open recall on  August 27, 2020 and a spreadsheet of the affected VINs will be available in the Warranty system.
REMINDER: It is a violation of Federal law to sell or lease a vehicle covered by this recall notice unless the recall remedy has been completed. Substantial civil penalties apply to violations of this law.

If you have any questions or concerns, please contact the Autocar Warranty Department at warranty@autocartruck.com.

 

Sincerely,

 

AUTOCAR, LLC

 

ACF 00002 Rev. 000

 

551 South Washington Street, Hagerstown, IN  47346 – Office: 765.489.5499 – Fax: 765.489.5230

 


General Recall Reimbursement Plan

 

I. Introduction

Pursuant to 49 U.S.C. 30120(d), 49 C.F.R. Parts 573 and 577, and other applicable requirements, Autocar, LLC and Autocar Industries, LLC (collectively “Autocar”) hereby provides the National Highway Traffic Safety Administration (“NHTSA”) its general reimbursement plan for the cost of remedies paid for by vehicle owners before they are notified of a related safety recall.

As set forth at 49 C.F.R. 573.6(c)(8)(i) and 49 C.F.R 573.13, the following information sets forth Autocar’s general plan to reimburse owners and purchasers for costs incurred for remedies in advance of notification of potential safety-related defects or noncompliance.

 

II. Reimbursement Notification 

Autocar’s notice to a vehicle owner in accordance with 49 C.F.R. Part 577 will indicate whether Autocar is offering a refund. A vehicle owner will be eligible for reimbursement if the owner paid to have service to remedy the defect or noncompliance prior to a specified ending date.

As set forth at 49 C.F.R 573.13(c)(2), the ending date shall be 10 calendar days after the date on which Autocar mailed the last of its Part 577 notifications to owners in the United States, unless a specific reimbursement plan is made available for a particular recall.

Autocar’s notice will instruct owners to seek eligible reimbursement through Autocar’s Service & Warranties Department, at the following address or otherwise applicable business address:

Autocar LLC
Service & Warranties Department
551 S. Washington Street
Hagerstown, Indiana 47346

Owners will also be instructed that they may contact Autocar by telephone (toll free) at 888-218-3611 or 877-973-3486

NHTSA’s regulations (see 49 C.F.R. 573.13(c)) permit Autocar to identify a beginning date for reimbursement eligibility. Accordingly, an owner who paid to remedy the defect or noncompliance prior to the identified beginning date would not be eligible for reimbursement. Autocar puts its owners and customers first, and therefore, the company has generally has not firmly established such a beginning date for reimbursement eligibility, and as of the date of this policy, does not presently anticipate changing this general policy.

Should Autocar determine (as NHTSA permits) that a beginning date is appropriate, Autocar will indicate that date in the specific reimbursement plan for that particular recall. As permitted by 49 C.F.R. 577.11(e), Autocar may not include a reimbursement notification when all vehicles are well within the warranty period, subject to approval by NHTSA.

 

III. Costs to be Reimbursed 

For vehicles, reimbursement will not be less than the lesser of:

  • The amount paid by the owner for the remedy that specifically addressed and was reasonably necessary to correct the defect or noncompliance that is the subject of the recall; or,
  • The costs of the part(s) for the remedy (to be no more than the manufacturer’s list retail price for authorized part(s)), plus associated labor at local labor rates, miscellaneous fees (such as disposal of waste), and taxes.

For replacement equipment, reimbursement will be the amount paid by the owner for each replacement item (limited to the amount of the retail list price of each defective or noncompliant item that was replaced, plus taxes, where the brand or model purchased by the owner was different than the brand or model that was subject to the recall). If the item of motor vehicle equipment was repaired, the reimbursement provisions identified above for vehicles will apply.

As set forth at 49 C.F.R. 573.13(d)(1), costs incurred by the owner within the period during which Autocar’s original or extended warranty would have provided for a free repair of the defect or noncompliance will not be eligible for reimbursement.

 

IV. Entity Authorized to Provide Reimbursement

Autocar will directly reimburse owners, unless a specific reimbursement plan is made available for a particular recall, and will encourage owners to pursue requests for reimbursement directly through its Service & Warranties Department to expedite reimbursement, as set forth above in Section II. In whatever manner the request for reimbursement is made, under this Plan or a specific reimbursement plan, the owner will be directed to submit the required documentation, upon which reimbursement eligibility will be determined.

 

V. Required Documentation

The reimbursement determination will depend upon the information provided by the owner.

As set forth at 49 C.F.R. Part 573.13(d)(4), the owner must submit all of the following information:

  • Claimant’s name and mailing address;
  • For motor vehicles, the vehicle identification number (or “VIN”), vehicle make, model, and model year;
  • For replacement equipment, a description of such equipment or, for tires, the model and size;
  • Identification of the applicable recall (either Autocar’s recall number, or NHTSA’s applicable recall campaign number);
  • Identification of the owner of the recalled vehicle at the time that the pre-notification remedy was obtained;
  • An original receipt for the pre-notification remedy that includes a breakdown of the amount for parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt covers work other than to address the recall or noncompliance, Autocar may require the claimant to separately identify costs that are eligible for reimbursement.
  • If the remedy was obtained during the warranty period, documentation indicating that the warranty was not honored or that the warranty repair did not correct the problem related to the recall.

Failure to submit all of the above information may result in denial of the reimbursement request.

 

VI. Additional Information

The Part 577 required owner notice will provide a toll-free telephone number through which specific information about the reimbursement plan can be requested from Autocar.

As set forth at 49 C.F.R. 573.6, this general reimbursement plan will be incorporated into notifications by reference. Information specific to a particular recall also may be incorporated into the Part 573.6 notification.

 

VII. Response to Requests for Reimbursement

Autocar will act upon requests for reimbursement as follows:

  • Autocar will act upon a claim for reimbursement within 60 days of its receipt. If Autocar denies the claim, Autocar will send a notice to the claimant within 60 days of receipt of the claim that includes a clear, concise statement of the reasons for the denial.
  • If a claim for reimbursement is incomplete when originally submitted, Autocar will advise the claimant within 60 days of receipt of the claim of the documentation that is needed and offer an opportunity to resubmit the claim with complete documentation.

Reimbursement shall be in the form of a check from Autocar.

 

VIII. Miscellaneous

Autocar will make a copy of this plan available to the public, upon request.

As permitted by 49 C.F.R. 573.13(m), Autocar will not reimburse owners for recalls based solely on noncompliant or defective labels.

As set forth at 49 C.F.R. 573.13(n), reimbursement for a pre-notification remedy will not be provided to an owner if, in the case of a motor vehicle or replacement equipment other than a tire, it was bought by the first purchaser more than 15 calendar years before notice is given under 49 U.S.C. 30118(c) or an order is issued under section 49 U.S.C. 30118(b). In the case of a tire, this period shall be 5 calendar years.

Dated: June 1, 2020

 


Chronology :

11/2018 – Autocar received first report of failed relay retention.

3/2019 – Autocar engineering begins investigations. Q2 2019 – Autocar engineering performs various tests to determine root cause.

8/2019 – Autocar discovers that harness supplier may not be installing the relay retainer.

9/2019 – Autocar issues stop ship to cover vehicles in yard, orders harness supplier to follow the bill of materials.

11/2019 – Autocar replicates failures, verifying that lack of retainer is root cause.

12/20/2019 – Autocar management team meets and decides to issue recall for all affected vehicles.

 


6 Affected Products

Vehicle

MAKE MODEL YEAR
AUTOCAR XSPOTTER 2015-2020

 


10 Associated Documents

Interim Owner Notification Letter(Part 577)

RIONL-19V922-3927.pdf 208.448KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [203.56 KB]

 


Recall Acknowledgement

RCAK-19V922-7969.pdf 245.267KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.52 KB]

 


Defect Notice 573 Report

RCLRPT-19V922-8190.PDF 214.308KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.29 KB]

 


Recall Quarterly Report #1, 2020-3

RCLQRT-19V922-1447.PDF 211.135KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Miscellaneous Document- Recall Card

RMISC-19V922-7047.pdf 67.331KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [65.75 KB]

 


Manufacturer Reimbursement Plan

RMRP-19V922-6554.pdf 614.358KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [599.96 KB]

 


Owner Notification Letter(Part 577)

RCONL-19V922-3077.pdf 203.588KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [198.82 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-19V922-3404.pdf 145.995KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [142.57 KB]

 


Safety Bulletin

RCSB-19V922-0632.pdf 1326.397KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.26 MB]

 


Remedy Instructions and TSB

RCRIT-19V922-8426.pdf 1326.397KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.26 MB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V922&docType=RCL

 


 

Bestseller No. 1
irhapsody 5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
  • Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
  • 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
  • Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
  • Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
  • Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
Bestseller No. 2
Nilight 50003R Automotive Set 5-Pin 30/40A 12V SPDT with Interlocking Relay Socket and Wiring Harness-5 Pack, 2 Years Warranty
  • High switching capability: Normally open 40A/14V DC and normally close 30A/14V DC. Suitable for Nilight LED light bar wiring harness kit
  • Premium quality: Durable relay and harness socket with 5 wires; Made by high-grade materials to ensure superior quality and long lifespan
  • Male-female slot design: Unique male-female slot design, easy to connect the relay with harness socket, clean and neat after installation
  • Easy wiring: The relay sockets come with different colors for loads/accessories, simple and convenient wiring
  • Package include: 5 x relay and 5 x relay socket with wires.Fit type: Universal fit
Bestseller No. 3
Joinfworld Relay Box 12V Automotive Fuse Relay Box Pre-Wired Universal Waterproof Fuse and Relay Box with 6 Relays and 6 ATC/ATO Blade Fuses for Car Truck Jeep Boat
  • Assembled Relay Fuse Box: This automotive 12v relay box with wiring harness has high capacity holder box, package includes 5pcs 4Pin 40A JD1914 Relays and 1pcs 4 Pin RTT7121 Relay, 6pcs 5A, 10A, 15A, 20A, 25A, 30A blade fuses.
  • Solid Material: Joinfworld 12V Fuse and Relay Box is made of high-quality nylon material flame retardant shell, each slot has a precise cutout, and an arc socket is reserved on the edge, so that all your wiring is neat and beautiful.
  • Neat Wiring Harness: This 12v car relay fuse box has all the necessary wires pre-wired so you can connect directly to the vehicle, avoiding the hassle of wiring, it is more convenient for your installation and use.
  • High performance: Joinfworld 12V Fuse and Relay Box comes with functional powerful insulation shell, with waterproof and dust-proof top cover and bottom cover, wire opening hole is the outlet of all wires, which can be well connected together for better waterproof dust fire prevention.
  • Wide Application: The Automotive Relay Box suitable for all vehicles, 4X4 Offroad Jeep SUV UTV ATV RV Pickup Truck Trailer Camper Marine Boat, etc. For any problems, please do not hesitate to write to us.
Bestseller No. 4
Gebildet JD1912 Car Relay Harness 12V 40A 4 Pin SPST Harness Sockets with Color-labeled Wires for Automotive Truck Van Motorcycle Boat (Pack of 2)
  • Brand new heavy duty SPST(Single Pole Single Throw) relays with color-labeled wires.
  • Minimum operating voltage 8V, corresponding minimum operating current is 100mA; Standard operating voltage 12V, corresponding standard operating current is 150mA.
  • Small size/Low power consumption/High contact voltage/ High sensitivity.
  • Contact Material: Ag Alloy / Contact Resistance: ≤ 100MΩ.
  • Life Expectancy Electrical: 100,000 Operation, Life Expectancy Mechanical: 10,000,000 Operation.
Bestseller No. 5
Nilight 50023R 5 Pack 30A Fuse Relay car Truck Socket kit-30A Switch Harness Set-12V DC 4-Pin SPST Automotive 14 AWG Hot Wires-Auto Switches & Starters Set,2 Years Warranty
  • Upgraded Version - Automotive relays built in fuse socket included 30A blade fuses with heavy duty 14AWG wires for main contact. No need of a separate fuse holder, saving space and money. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
  • Mounting Design Feature - The interlocking mounting design of unique male and female slot on each socket edge, connect relays together and manage cables easily, offering clean and neat installation.
  • Easy Wiring - The relay sockets come with color-labeled wires for load/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87)
  • Wide Application - Widely used in car keys power control, over-load protection, trunk release, polarity change, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs, control motors/other electronics etc.
  • Set includes 5 relays, 5 relay harnesses, and 5 30A blade fuses. 2 Year Warranty by Nilight.
Bestseller No. 6
gunhunt 4 PCS 40A Automotive Relays, Car Relay Switch, 5 Pin Relay, 12V Waterproof Car Relay, Trim System Components, Replacement for Car Boat Outboard Motor (Black)
  • Quality Materials: The shell is made of PA66 material and pure copper enameled wire, which has good thermal conductivity, can dissipate heat faster and reduce temperature rise. The compact and repairable structure of the sloped trim relay will hardly break or deform, helping you adjust and switch circuits stably.
  • Plug and Play: Compatible with the most universal 12V 5-Pin automotive relay with a 40A switching capability. Easy to process your demand. Please check the dimensions and the direction of the poles carefully before ordering to avoid buying the incorrect product.
  • Wide Application: Outboard tilt system application and all automotive devices equipped with a 12-volt dc power source car sound systems, security systems, compressor, air.
  • Nice Replacement for Many Relays: The electrical relay box can be a nice replacement for 582195, 582472, 582473, 584416, 586147 and 586224, offering you a pleasant using experience.
  • Sufficient Quantity for Using: The package comes with 4 pieces of automotive replacement electrical system relays, enough to meet your using and replacing demands in daily life, bringing you lots of convenience.
Bestseller No. 7
10 Pack 30/40 AMP Waterproof 5-Pin 12V Relay Switch (SPDT)for 12 Volt Automotive Marine Relays for Boats Auto Fan Cars
  • 12V waterproof 5-Pin SPDT Relay Excellent waterproof and dustproof ability, high quality in any weather conditions
  • 12V 5-Pin SPDT Relay Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
  • SPDT Relay with 40A/30A High Switching Capability,it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated.
  • 12v relays can operate with anywhere between 9v and 14v,Very suitable for 12V automotive, marine, and machine circuits.
  • These 12V 5-pin relays are rated to handle 30A on normally closed pin 87a and 40A on normally open pin 87.
Bestseller No. 8
TRUE MODS 6 Pack 4-Pin 12V Bosch Style Fused Relay Switch Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPST] [30 Amp] 12 Volt Automotive relays with Fuse for Auto Cars
  • Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact.
  • Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
  • 12VDC (14V Max) and 30A High Switching Capability.
  • Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87).
  • Set includes 6 relays, 6 relay harnesses, and 6 blade fuses.
Bestseller No. 9
EHDIS Car Relay 4 Pin 12v 40amp Spst Model No.: JD2912-1H-12VDC 40A 14VDC, Auto Switches & Starters,Pack of 2
  • Heavy duty 4-prongs SPST relays, jd1912 12v 40a relay
  • Use optional Relay Harness, or female Crimp Connectors
  • High 40A coil capacity- able to handle those high current applications with ease
  • Package Include: 2 x 40A 4-Pin 12V Vehicle Relays
  • The Automotive relay is suitable for normal automobile use and simple to operate, you just need to connect the relay with the wire, no other tools needed, convenient for your use and replace, allowing your components to work properly
Bestseller No. 10
TRUE MODS 6 Pack Bosch Style 5-Pin 12V Relay Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPDT] [30/40 Amp] 12 Volt Automotive Relays for Auto Fan Cars
  • User Manual available for download under Product Information Details
  • Bosch style 12VDC (14V Max) 5-Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability.
  • Interlocking design relay socket harness base for easy cable management & organization.
  • Heavy duty 14AWG wires for the main contact and pre-wired with 6" pigtail leads.
  • Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Yellow - Output N/C (87a), and Blue - Output N/O (87).

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 

Leave a Comment

Share to...