| “This site contains affiliate links for which OEMDTC may be compensated” |
November 13, 2019 NHTSA CAMPAIGN NUMBER: 19V811000
Electrical Connector Incorrectly Mounted to Floor
If the floor gets wet where the electrical connection is mounted, there is an increased risk of an electrical short and fire.
NHTSA Campaign Number: 19V811
Manufacturer Winnebago Industries, Inc
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 638
Summary
Winnebago Industries, Inc. (Winnebago) is recalling certain 2017-2020 Itasca Vista, Sunstar, and Adventurer 35F motorhomes. An electrical connector was mounted directly on the floor instead of to a standoff backet as intended.
Remedy
Winnebago will notify owners, and dealers will correctly mount the electrical connector onto a metal standoff bracket, free of charge. The recall began December 10, 2019. Owners may contact Winnebago customer service at 1-641-585-6939 or 1-800-537-1885. Winnebago’s number for this recall is 160.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
INSTRUCTIONS TO PERFORM RECALL CAMPAIGN 160
(Residential Refrigerator)
Models Affected
| 2017 | Winnebago Vista | Itasca Sunstar | |
| 2018 | Winnebago Vista | Itasca Sunstar | |
| 2019 | Winnebago Vista | Itasca Sunstar | Winnebago Adventurer |
| 2020 | Winnebago Adventurer |
INSTRUCTIONS TO PERFORM RECALL CAMPAIGN 160
FOR RESIDENTIAL REFRIGERATOR APPLICATIONS
Tools and Parts Required
Cardboard – or – similar material for floor protection
Screw Gun
Bit Holder Extensions
3/8” magnetic socket driver bit
#2 Philips bit
Brad nailer – or – hammer
1 ½” Brad nails
Recall Repair Kit # RC 7645-20-760
NOTE: Only use the parts supplied in the recall kit to complete this repair.
Unit Prep
– Locate the refrigerator access door found on the coach exterior right sidewall.
– Inside the access door
– Unplug the refrigerator
– Disconnect the icemaker line ensuring the valve is in the closed position.
– Locate the refrigerator inside the coach
– Lay down material such as cardboard to protect the floor covering
– Ensure the refrigerator door travel latch is engaged
Component Removal
– Remove the trim pieces above and below the refrigerator. Be careful of the nails sticking out from the trim. Using pliers, remove the nails and discard. Place these trim pieces to the side for later use.
– Remove the metal bracket and 8 screws which secures the refrigerator to the cabinet. Place the screws and bracket to the side for later use.
– Locate the top brackets which secures the refrigerator to the sidewall.
– Using the bit extensions and the 3/8” magnetic socket driver bit. Remove the 4 fasteners, retaining and setting off to the side for later use.
Remove the refrigerator
– This step will require more than one person. Practice safe lifting techniques when maneuvering the refrigerator out of the opening and on to the floor.
– Be aware of the potential for damage to the refrigerator cabinet face frame and use safeguards to prevent damage from happening.
– Remove the refrigerator cabinet floor.
– Retain the floor pieces and screws, setting aside for later use.
– Locate the Electrical connector which is installed to the rear of the furnace and fastened to the floor.
– Detach the electrical connector from the floor by taking out the four screws which pass through the connector body.
– Remove clamps holding the wire at each end of the connector.
– Retain and set aside the connector screws, clamps, and clamp screws.
Recall Remedy
– Obtain the standoff bracket and familiarize yourself with the orientation, attachment method, and predrilled mounting holes for the electrical connector and wire clamps.
– In the same location where the electrical connector was detached, place the standoff bracket and ensure the correct orientation for attachment.
– Using the #8 screws supplied in Recall Repair Kit attach the bracket to the floor.
– Line up the attachment holes of the connector with the predrilled holes found on the bracket.
– Using screws removed from the connector earlier, attach the connector to the bracket.
– Using the clamps and screws removed earlier, place the clamps so they align with the predrilled holes and reattach with the screws.
Component Reinstall
– Through the remedy process, many components will be moved around. Components cannot contact the furnace enclosure. Using the wire ties and screws provided in the recall kit, secure all items away from the furnace.
– Reinstall the refrigerator cabinet floor using the floor pieces and screws set aside earlier.
– Reinstall the refrigerator
– This step will require more than one person. Practice safe lifting techniques when maneuvering the refrigerator from the floor and into the opening.
– Be aware of the potential for damage to the refrigerator cabinet face frame and use safeguards to prevent damage from happening.
– Using the bit extensions and the 3/8” magnetic socket driver bit. Reinstall the 4 fasteners set aside earlier into the existing holes.
– Align the top brackets with the holes previously used for attachment.
– Using the flat bracket and 8 fasteners set aside earlier, align and reinstall the bracket securing the refrigerator bottom to the refrigerator cabinet.
– Reinstall the trim pieces removed and set aside earlier using 1 ½” brad nails and the brad nailer or
hammer.
– Inspect the work area and cabinet to ensure damage is not present.
– Locate the access door found on the right sidewall outside of the coach.
– Reconnect the icemaker line.
– Plugin the refrigerator
Test
– Since the icemaker line was disconnected, testing of the water distribution system will be necessary.
– Follow the established water system test checking the system for leaks.
– If necessary, winterize the coach.
▪ If you are not familiar with the test or winterization process, please contact: Technical Assistance 1-866-653-4329
INSTRUCTIONS TO PERFORM RECALL CAMPAIGN 160
(LP Refrigerator)
Models Affected
| 2017 | Winnebago Vista | Itasca Sunstar | |
| 2018 | Winnebago Vista | Itasca Sunstar | |
| 2019 | Winnebago Vista | Itasca Sunstar | Winnebago Adventurer |
| 2020 | Winnebago Adventurer |
INSTRUCTIONS TO PERFORM RECALL CAMPAIGN 160
FOR LP REFRIGERATOR APPLICATIONS
Tools and Parts Required
Cardboard – or – similar material for floor protection
Screw Gun
Bit Holder Extensions
#2 Philips bit
½” Wrench
Recall Repair Kit # RC 7645-20-760
NOTE: Only use the parts supplied in the recall kit to complete this repair.
Unit Prep
– Turn off the LP supply before proceeding to the following steps.
– Locate the refrigerator access door found on the coach exterior right sidewall.
– Inside the access door
– Unplug the refrigerator
– Disconnect the icemaker line.
– Disconnect the LP line.
– Locate the refrigerator inside the coach
– Lay down material such as cardboard to protect the floor covering
– Ensure the refrigerator doors are latched, preventing them from opening
Component Removal
– Through the exterior access, remove fasteners located at brackets to the front and rear. Retain and set these fasteners aside for later use.
– Remove the vent cover located above the refrigerator on the roof. Retain the cover and four screws for later use.
– Through the vent expanded metal, gain access to the screws which attach the two brackets to the refrigerator.
– Remove the screws which attach the bracket to the refrigerator. Retain the screws for later use.
– From inside the coach remove the fasteners securing the refrigerator.
– These fasteners are located along the top and bottom.
– The refrigerator doors will need to be open for access.
– Retain the trim pieces, fasteners and screw covers for later use.
– Remove the refrigerator
– This step will require more than one person. Practice safe lifting techniques when maneuvering the refrigerator out of the opening and on to the floor.
– Be aware of the potential for damage to the refrigerator cabinet face frame and use safeguards to prevent damage from happening.
– Remove the refrigerator cabinet floor.
– Retain the floor pieces and screws, setting aside for later use.
– Locate the Electrical connector which is installed to the rear of the furnace and fastened to the floor.
– Detach the electrical connector from the floor by taking out the four screws which pass through the connector body.
– Remove clamps holding the wire at each end of the connector.
– Retain and set aside the connector screws, clamps, and clamp screws.
Recall Remedy
– Obtain the standoff bracket and familiarize yourself with the orientation, attachment method, and predrilled mounting holes for the electrical connector and wire clamps.
– In the same location where the electrical connector was detached, place the standoff bracket and ensure the correct orientation for attachment.
– Using the #8 screws supplied in Recall Repair Kit attach the bracket to the floor.
– Line up the attachment holes of the connector with the predrilled holes found on the bracket.
– Using screws removed from the connector earlier, attach the connector to the bracket.
– Using the clamps and screws removed earlier, place the clamps so they align with the predrilled holes and reattach with the screws.
Component Reinstall
– Through the remedy process, many components will be moved around. Components cannot contact the furnace enclosure. Using the wire ties and screws provided in the recall kit, secure all items away from the furnace.
– Reinstall the refrigerator cabinet floor using the floor pieces and screws set aside earlier.
– Reinstall the refrigerator
– This step will require more than one person. Practice safe lifting techniques when maneuvering the refrigerator from the floor and into the opening.
– Be aware of the potential for damage to the refrigerator cabinet face frame and use safeguards to prevent damage from happening.
– From inside the coach reinstall the trim pieces and fasteners retained earlier securing the refrigerator to the cabinet.
– These fasteners are located along the top and bottom.
– The refrigerator doors will need to be open for access.
Reinstall the screw covers.
– Through the exterior access, reinstall fasteners removed earlier which are located at brackets to the front and rear. Retorque these fasteners to 27 N-M (20 ft lb)
– Reconnect the icemaker line
– Reconnect the LP line
– Above the refrigerator, on the roof: Through the vent expanded metal, gain access to the two brackets used to secure the refrigerator.
– Reinstall the screws retained earlier attaching the brackets to the refrigerator.
– Before the next step, ensure the expanded metal is properly positioned.
– Reinstall the vent cover using the screws retained earlier.
– Plug in the icemaker and the refrigerator
Test
– Since the icemaker water line and the LP line were disconnected, testing of the water distribution system and LP System will be necessary.
– Follow the established water system and LP system tests checking the system for leaks.
– If necessary, winterize the coach.
▪ If you are not familiar with the test or winterization process, please contact: Technical Assistance 1-866-653-4329
12 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| WINNEBAGO | ADVENTURER | 2017-2020 |
| WINNEBAGO | SUNSTAR | 2017-2020 |
| WINNEBAGO | VISTA | 2017-2020 |
8 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V811-5606.PDF 211.24KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #1, 2019-4
RCLQRT-19V811-5659.PDF 211.141KB
Loading...
Recall Quarterly Report #3, 2020-2
RCLQRT-19V811-3962.PDF 211.326KB
Loading...
Defect Notice 573 Report
RCLRPT-19V811-5724.PDF 212.713KB
Loading...
Recall Acknowledgement
RCAK-19V811-3327.pdf 245.592KB
Loading...
Remedy Instructions and TSB
RCRIT-19V811-5125.pdf 1616.145KB
Loading...
Remedy Instructions and TSB
RCRIT-19V811-6594.pdf 1315.703KB
Loading...
Recall Quarterly Report #4, 2020-3
RCLQRT-19V811-6288.PDF 211.436KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V811&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- BESTEK Advantage: America's leading power inverter brand. Provides 300 Watts continuous DC to AC power and 700 Watts instantaneous power, featuring 2 AC outlets and 2 USB ports
- Fast Charging: two 110V AC outlets for charging larger devices such as laptops and tablets, 2 USB charging ports (0-2.4A) for powering USB compatible devices, a good choice as requisite car accessories
- Ultra Compact and Lightweight: iPhone-sized design ideal for use on vacations, work trips, and camping. 24 inch cigarette lighter plug makes the power inverter can be plugged into almost any vehicle
- Multi-Protection: built-in 40 amps fuse to protect your device. Safe charging design provides protection against, overheating, under and over voltage charging, short circuiting
- Durable metal housing provides advanced protection from drops and bumps.Smart cooling fan system makes the car power inverter very silent when operating,and the fan runs faster when the device gets warmer or output power exceeds 70W. 60-Months Warranty
- 【Pro Chaser Power Inverter Basics】: Our inverter produces 400 Watts continuous DC to AC power and 800 Watts instantons power, with dual 110V AC power sockets and 6.2A dual USB ports (3.1A each) power outlets.
- 【Ideal for Road Trips】: Plug-in & go drawing power from Cigarette Lighter Socket Charger. The 6.2A dual USB ports can be used to charge appliances such as kindles, cellphones, iPads, tablets, cameras, air pods and etc. And the power sockets can be used to supply power to any appliances requiring 300W to 400W power such as laptops, DVD players, breast pumps, bottle warmers and etc.
- 【Portable Design】: The compact cellphone-sized design ideal for carrying around in vehicles. The 30 inch (75 cm) cord allows the inverter to reach out long towards back seat. Ideal for road trips, camping & vacations.
- 【Built-in Safety Protection】The built-in fuse provides full protection against short-circuit, over-load, low-voltage, over-voltage & over-temperature. The cooling fan turns on automatically when internal temperature reaches 113F (45℃), maintaining the working temperature in a cool and safe range.
- 【Durable Metal Housing】Durable metal housing provides advanced protection from drops and bumps. Evenly colored housing with neat laser print on the surface delivers fashionable finish. 12-month Warranty.
- 【Upgrade 400W Power Inverter】Provides 400 watts continuous DC to AC power and 600 watts of peak power.This car power inverter features dual 110V AC outlets and 2 USB ports, great for charging string lights, laptop, breast pump, CPAP machine, nebulizer, game console, kindle, DVD players, lights, iPhones, iPad, and other electronic devices.The cigarette lighter of a car generally can only drive electrical appliances of about 150w.
- 【Fast Charging】Dual 110V AC outlets can charge larger devices such as laptops and tablets or plug in a new adapter for more charging needs; 2 USB charging ports (0-2.4A)can automatically detect your devices to deliver optimal charging speed, a good choice as requisite car accessories.
- 【Double protection mechanism】Smart chip + built-in fuse double protection mechanism.Safe charging design provides protection against, overheating, under and over voltage charging, short circuiting, overloads, and overcharging. Once the product detects a fault by itself, the inverter will automatically turn off the current output and light up a red light to remind the user.
- 【Portable design for journey】iPhone-sized design ideal for use on vacations, work trips, and camping. 24 inch cigarette lighter plug makes the power inverter can be plugged into almost any vehicle.The length of the Cord is 19.68 inch, easily reach the backseat, with fastening tape,which is more convenient to keep.
- 【Smart Premium Cooling Effect】Durable metal housing provides advanced protection from drops and bumps.Built-in silent automatic temperature-controlled cooling fan helps reduce heat and prevent shortages. What You Get: GELOO 400W car power inverter, user manual, 18 months warranty and 24 hours customer service.
- Converts vehicle's DC power to household AC for power on the go
- 120V AC power outlet
- Dual 3.1A USB outlets
- Silent operation—no loud, annoying fan
- Backlit power button with power & fault indicator
- Premium 150w car power inverter: Plug in the car cigarette lighter, offering 150 Watts of continuous 12V DC to 110V AC power output, this car adapter for plug outlet equipped with 2 USB ports and 1 AC outlets, easy charging multi charging devices in the vehicle.
- Fast Charging: Dual USB ports can charge most phones and tablets simultaneously (Max 3.1A total output), while AC outlets great for laptop, computer, Christmas gift, charging string lights, baby stuff, breast pump, CPAP machine, nebulizer, game console, kindle, TV, DVD players, lights, iPad, and other electronic devices.
- Road Trip Essentials: Just about credit card size - 3.2 x 2.5 x 1.5 inches, space-saving and easy storage, with aluminum shell design, extremely portable and lightweight at only 8 oz+. To use for work, outdoor activities, road trips, "van life" or other mobile living situations.
- Multi-Protection: Power inverters for vehicles built-in fuse to protect your device, stable charging design provides protection against, overheating, under and over voltage charging, short circuiting, overloads, and overcharging.
- Intelligent Silent Use: Durable metal housing provides advanced protection from drops and bumps. Integrated very silent cooling fan helps reduce heat and prevents short-circuit.
- POWERFUL OUTPUT: Convert power of DC 12V to AC 110V 60Hz. Provides 1000 Watts continuous modified sine wave power and 2000 Watts peak power. Featuring 2 AC outlets and Dual 3.1A USB ports for multi-purpose charging. Great High efficiency: conversion efficiency > 90%.
- INTELLIGENT LCD DISPLAY: In normal working state, the LCD Display will display the input/output voltage, battery capacity, load capacity and output frequency. When the inverter is in an abnormal state, the LCD Display will display the abnormal code. Such as, E-1: Low Voltage Protection, E-2: High Voltage Protection, E-3: Overtemperature Protection, E-4: Overload Protection, E-5: Short Circuit Protection.
- MULTI-PROTECTION: 2 Built-in 50A fuses to protect your device. 6 kinds of protection to against: Overload / Short Circuit / Over heat / Reverse Polarity / Under or Over Voltage protections. Make your batteries and appliances safer. And we have 12-Months Warranty.
- SPECIAL DESIGN: Built-in temperature control cooling fan. Isolated Ground Neutral. 2pcs battery clips and 24 inch cigarette lighter plug come along with the power inverter, they make the power inverter can be plugged into almost any vehicle. Durable aluminum body provides advanced protection and easier to cooling.
- WIDE APPLICATION: The sockets are designed to easily insert two large size plugs at the same time. Dual 110V AC Outlets ideal for charging laptop, fan, small car refrigerator, game console, kindle, TV, Christmas lights, Breast Pump. Ideal for use on vacations, work trips, home or outdoors for emergency, outdoor activities and camping.
- Power Inverter 1000 Watt - The Home and outdoor Maxpart manufacturer Pro inverter provides dual 110V AC outlets with continuous DC to AC power output, converts 12V DC battery power to standard 110V AC, featuring 2 AC outlets and 2 USB ports( QC 3.0 and 30W PD3.0) .inversor de corriente 12v a 110v NOTE: The upgraded version of 2024 has the same features as the original classic version. The main difference is that the upgraded version replaces two 2.4A USB ports with one 3.0A USB and one PD 3.0 (30W Type-c)
- Fast Charging - 110V AC outlets (up to 750watt surge capacity) for charging larger devices such as laptops and tablets, USB charging ports (0-2.4A,up to 50watt surge capacity) for powering USB compatible devices, Car Cigarette Lighter ( up to 150watt surge capacity).This car outlet adapter is a car accessories Digital Display inverter for Portable Audio, Camping Lamps, Digitals Cameras, Car Refrigerator, etc.
- Safety Multi-Protection 1000W 12V Automobile Inverter - Cooling Fan,Smart Digital Display, and Mini Slip Fuse to protect against Over Voltage, Low Voltage,Overload ,Short Circuit, Over Heat. Applies the technology of ABS crashworthiness, robust, as well as good electrical insulation auto inverter.
- Widely Using Inverter - Inversor can be connected with vehicle lighter or 12V battery directly for Emergency or solar inverter, Hurricane, Storm, Snowstorm, and Outage,cell-phone, laptop, electric light, digital camera, breast pump, electrical tools and other electronics.
- What You Get - Our power inverter have CE and FCC , ROSH certification. We provide a 12-Month Hassle-Free Warranty, 24-hour friendly customer service, and 100% customer satisfaction. (Please use in well-ventilated, dry area.)
- 1.[Wide application]. NGNWOB 2500 Watt inverter provides continuous 2500 Watts / instantaneous 5000Watts power for multi-devices simultaneously with 1 USB outlet and 3 AC outlets; With its high power output , This 2500W inverter can power up wide rang of devices, power tools , vacuum cleaners, electric heaters, boilers, electric fans, refrigerators,microwave oven etc. Ideal used in your car , truck, semi truck , RV , Vehicles , boat, emergency, or any other power outage.
- 2.[Intelligent LCD display]: Smart LCD display of this 2500 watt power inverter monitors your battery status constantly. It shows input voltage, battery capacity. Easy to know the battery status: full, normal or empty.
- 3.[Energy- saving] According to the intelligent control program of 2500W inverter , the NGNWOB inverter 2500 watt consumes less than 5W in standby. The power conversation rate is high as 88%.
- 4.[Multi-protection]: Built-in 8X30A fuses protect your device and the 12V truck inverter from short circuit current; Stable charging design protect inverter against overheating, under and over voltage charging, short circuiting, overloads, and overcharging.
- 5.[Excellent cooling performance and durability] The 3 powerful smart cooling fans and aluminum alloy shell of the 12 volt inverter with great heat dissipation ensure fast cooling performance; Durable rigidity of metal casing protect it against bumps and drops.
- BESTEK Advantage: America's leading power inverter brand. Provides 200 Watts continuous DC 12v to AC 110v power inverter featuring 2xPD 30W&2xQC 18W USB ports, 2 AC outlets, and a 23.8-inch cable with cigarette lighter plug and LCD Display for you, more convenient.
- EFFICIENT QUICK CHARGING: USB total 96W, fast Type-C car inverter supporting PD 30W(Max) and QC 18W(Max) high output, can fast charge all prevailing phones at the same time. The PD port is 6X faster than a 2.4A charger, and can quickly charge iPhone, iPad, MacBook, etc.
- SAFE PROTECTION FOR CHARGING: Built-in 40-amp fuse to protect your device, LED indicators for short circuit protection, temperature control, under-voltage, and over-voltage protection. It helps protect and extend the life of your electronics and appliances.
- PORTABLE WITH COMPACT DESIGN: The lightweight inverter is space-saving and easy to store, Ideal for use on long car road trips, family vacations, and camping. Great for charging string lights, laptops, tablets, breast pumps, CPAP machines, GoPro cameras, nebulizers, game consoles, kindle, TVs, DVD players, lights, iPhones, iPads, car vacuum cleaners, LED table lamps, mini-fridges, and other electronic devices.
- QUIET COOLING FAN: The smart cooling fan will automatically rotate at different speeds according to power load and temperature, this design can help to reduce the fan noise. Also, the high-speed cooling fan protects the inverter against overheating.
- 〖Premium150W Power Inverter〗Car Power Inverter Provides 150 watts continuous DC to AC power and 300 watts of peak power. Great for charging string lights, laptop, breast pump, CPAP machine, nebulizer, game console, TV, DVD players, lights, iPad, and other electronic devices.
- 〖Fast Charging〗110V AC outlets for charging larger devices such as laptops and tablets, 2 USB charging ports for powering USB compatible devices
- 〖Double protection mechanism〗Smart chip + built-in fuse double protection mechanism. Once the product detects a fault by itself, the inverter will automatically turn off the current output and light up a red light to remind the user, avoiding the trouble of replacing the fuse.
- 〖Ideal for the journey〗Ultra-compact and lightweight, just about credit card size-3.4 x 2.5 x 1.5 inches (8 oz+),saving space and easy to carry.
- 〖Multi-protection〗The durable metal housing can provide advanced protection from drops and collisions. The safe charging technology can prevent the machine from overheating, reverse connection, under voltage, over voltage, overload and short circuit.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.