“This site contains affiliate links for which OEMDTC may be compensated” |
October 4, 2019 NHTSA CAMPAIGN NUMBER: 19V708000
Incorrectly Mounted Axles/Light Tongue Weight
Light tongue weight can lead to unsafe towing conditions including trailer sway and/or the trailer becoming separated from the tow vehicle, increasing the risk of a crash.
NHTSA Campaign Number: 19V708
Manufacturer Outdoors RV Manufacturing
Components TRAILER HITCHES
Potential Number of Units Affected 27
Summary
Outdoors RV Manufacturing (ORV) is recalling certain 2019-2020 Trail Series MTN TRX 22TRX toyhauler travel trailers. The axles may be incorrectly mounted too far forward, potentially causing light tongue weight on the tow vehicle.
Remedy
ORV will notify owners, and dealers will move the axles 10 inches back towards the rear of the trailer to increase the tongue weight, free of charge. The recall began October 11, 2019. Owners may contact ORV customer service at 1-541-962-1866, extension 222. ORV’s number for this recall is 2019-001.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
OUTDOORS RV | TRAIL SERIES | 2019-2020 |
9 Associated Documents
Recall Quarterly Report #2, 2020-1
RCLQRT-19V708-6671.PDF 211.244KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V708-1022.PDF 211.142KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V708-7190.PDF 211.327KB
Recall 573 Report- Amendment 5
RCLRPT-19V708-9017.PDF 214.155KB
Defect Notice 573 Report
RCLRPT-19V708-7695.PDF 214.155KB
Recall 573 Report- Amendment 1
RCLRPT-19V708-9728.PDF 214.153KB
Recall 573 Report- Amendment 2
RCLRPT-19V708-2354.PDF 214.153KB
Recall Acknowledgement
Recall 573 Report- Amendment 4
RCLRPT-19V708-6910.PDF 214.154KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V708&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- High Strength Straight Steel Axle Tube
- Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
- Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
- Trailer Axle Design for use on Light Duty Trailers
- EZ Lube Design Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting Grease your axle without pulling off your whole entire hub
- Internal Wiring System To ensure seamless design Protect brake wires from wear and tear
- High Strength Straight Steel Axle Tube Construction to ensure Even Tire Wear A better highway experience
- Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs
- 72" from Hubface to Hubface and 58" Spring Center to Spring Center.
- Springs are 25 1/4" long and 1 3/4" wide
- 4 Leaf Springs
- 2-3/8" Main Tube
- 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
- Capacity: 2000 lbs, Tube:1-3/4 | 5x4.5 Bolt Pattern
- EZ Lube Design: Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Internal Wiring System: To ensure seamless design and protect brake wires from wear and tear.
- High Strength Straight Steel Axle Tube Construction: To ensure even tire wear and a better highway experience.
- Underslung - Axle is welded with spring seats on the bottom: Allows for lower ride height. For optimal usage, use with double eye springs.
- Versatile Design - Compatible for use on Medium Duty Trailers Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Flatbed, Livestock, Cargo, Enclosed, RV Trailers, Dump, Lowboy, Flatbed Trailers and more
- EZ Lube design for effortless maintenance - grease your axle without removing the whole hub assembly
- Underslung - Our trailer axle beam is welded with spring seats on the bottom Allows for lower ride height, for optimal usage, use with double eye springs
- High-Strength Construction - Made with straight steel axle tube to ensure even tire wear and a better highway experience
- Easy Installation - Simply pair with double eye springs for optimal usage and get your trailer back on the road in no time
- Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- High Strength Straight Steel Axle Tube
- Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
- Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
- Trailer Axle Design for use on Light Duty Trailers
- 2,000 lbs capacity
- Stub axles can be bolted (hardware not included) or welded to trailer frame
- 45 degree downward starting angle
- Perfect item to easily build your own custom motorcycle trailer
- Read product description below for more detailed information.
- 60" from Hubface to Hubface and 48" Spring Center to Spring Center.
- Springs are 25 1/4" long and 1 3/4" wide.
- 4 Leaf Springs
- 2-3/8" Main Tube
- 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.