Outer Tie Rods may Fail – CTR Outer Tie Rods

“This site contains affiliate links for which OEMDTC may be compensated”

August 15, 2019 NHTSA CAMPAIGN NUMBER: 19E054000

Outer Tie Rods may Fail

If the tie rods fail due to not being durable, control of the vehicle may be affected, increasing the risk of a crash.

 

NHTSA Campaign Number: 19E054

Manufacturer Capco USA, Inc.

Components STEERING

Potential Number of Units Affected 4,530

 

Summary

Capco USA inc. (Capco) is recalling certain CTR Outer Tie Rods sold for aftermarket installation. The taper on the ball studs may affect the durability of the outer tie rods.

 

Remedy

Capco will notify the affected distributors, and will provide replacement outer tie rods to the retail customers, free of charge. The recall began on October 3, 2019. Owners may contact Capco customer service at 1-248-994-0815.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


NHTSA is missing critical, required information for this safety recall. This information must be supplied through the NHTSA Recalls Portal within 5 working days of confirming its accuracy:

– A statement that the defect or noncompliance can cause a vehicle crash without prior warning; or a description of whatever prior warning may occur, and a statement that if this warning is not heeded, a vehicle crash can occur (49 CFR 577.5 (f)(1)).

– Your company’s program shall include a plan for reimbursing an owner or purchaser who incurred costs to obtain a remedy for the problem addressed by the recall within a reasonable time in advance of your company’s notification of owners, purchasers and dealers, in accordance with § 573.13 of this part. Your company’s plan may incorporate by reference a general reimbursement plan it previously submitted to NHTSA, together with information specific to the individual recall. Information required by § 573.13 that is not in a general reimbursement plan shall be submitted in your company’s report to NHTSA under this section. If your company submits one or more general reimbursement plans, your company shall update each plan every two years, in accordance with § 573.13. Your company’s remedy program and reimbursement plans will be available for inspection by the public at NHTSA headquarters (49 CFR 573.6 (c)(8)(i)). If the vehicles are new and would be covered under the manufacturer’s warranty program, please state that in the remedy section of your filing.


IMPORTANT SAFETY RECALL NOTICE

NHTSA Recall No. 19E054
October 2019

 

[Owner Name/Dealer Name] [Address]

[City], [State] [Zip]  Dear Customer:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

 

CAPCO USA, Inc. has decided that a defect which relates to motor vehicle safety exists in the Outer Tie Rods identified in the table below. As a result CAPCO is conducting a safety recall.

 

!  I M P O R T A N T  !
➢   Outer Tie Rods purchased from AutoZone are being recalled.
➢   You should contact our customer service center at 1-877-597-9588  to determine the next steps to obtain the remedy FREE OF CHARGE.

 

What is The Concern? 

You are receiving this letter because AutoZone’s records indicate that you may have purchased one or more of the affected Outer Tie Rods from AutoZone. The defect may lead to loss of vehicle control and may cause a crash without warning.  Some owners may experience a vibration in the steering wheel, hear an unusual sound or feel abnormal play when turning the steering wheel. The affected Outer Tie Rods are as follows:

Product Name Brand Product Logo  Part Number Date Code
Outer Tie Rod CTR ES3353 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES2600R OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES800525 OB, OC, OD, or OE
Outer Tie Rod CTR ES800530 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES4030 OB, OC, OD, or OE
Outer Tie Rod CTR ES4031 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES4089 OB, OC, OD, or OE
Outer Tie Rod CTR ES4090 OB, OC, OD, or OE
Outer Tie Rod CTR ES3655 OB, OC, OD, or OE
Outer Tie Rod CTR ES3567 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES3713 OA, OB, OC, OD, or OE

 

If your Outer Tie Rod is still in the box, the name DURALAST® will be printed on the outside of the box.   

 

CAPCO is recalling all of the Outer Tie Rods bearing the CTR logo with any date code shown in the table above. The CTR logo and date code of your Outer Tie Rod can be located on the tie rod end. The vehicle must be mechanically lifted under the supervision of a skilled mechanic in order to see the tie rod end.

 

What Should You Do?

  • If you believe you own a vehicle equipped with an affected Outer Tie Rod, please contact our customer service center at 1-877-597-9588 and provide them with the appropriate owner information to get your affected Outer Tie Rod inspected and replaced FREE OF CHARGE. If you have already incurred costs to remedy the affected Outer Tie Rod before receiving this notice, please call our customer service center to see if you are eligible for reimbursement.
  • The repair will take approximately 45 minutes.
  • If your Outer Tie Rod purchased from AutoZone has not yet been installed on a vehicle, please contact our customer service center at 1-877-597-9588 and provide them with the appropriate owner information to get your affected Outer Tie Rod replaced FREE OF CHARGE. 
  • If you have further questions regarding the free inspection, free repair, and reimbursement process, please call our customer service center at 1-877-597-9588.

 

What To Do if You Feel You Received this Notice in Error? 

If you no longer own the Outer Tie Rod purchased from AutoZone or the vehicle on which it may be equipped,  please call our customer service center at 1-877-597-9588 with the new owner’s information.

 

What To Do If You Have Further Questions or Concerns? 

Please call our customer service center at 1-877-597-9588. If after having attempted to take advantage of this recall, you are still not satisfied, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at     1-888-327-4236 (TTY 1-800-424-9153), or go to https:// www.safercar.gov.

We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction.

 

Sincerely,

Tsuyoshi Nakao, Vice President


AVISO IMPORTANTE DE RETIRADA DE SEGURIDAD

 

NHTSA Recall No. 19E054
octubre 2019

 

[Owner Name/Dealer Name] [Address]

[City], [State] [Zip]  Estimado Cliente:

Este aviso se le envía de acuerdo con los requisitos de la Ley Nacional de Tráfico y Seguridad de Vehículos Motorizados.

 

CAPCO USA, Inc. ha decidido que existe un defecto relacionado con la seguridad de los vehículos de motor en las terminales exteriores identificadas en la siguiente tabla. Como resultado, CAPCO está llevando a cabo un retiro de seguridad.

 

!  I M P O R T A N T E  !
➢   Se están recuperando las terminals exteriores compradas en AutoZone.
➢   Debe ponerse en contacto con nuestro centro de atención al cliente al 1-877-597-9588 para determinar los siguientes pasos para obtener el remedio Gratis.

 

¿Cuál es el problema? 

Está recibiendo esta carta porque los registros de AutoZone indican que puede haber comprado una o más de las terminales exteriores afectadas de AutoZone. El defecto puede provocar la pérdida del control del vehículo y puede provocar un accidente sin previo aviso. Algunos propietarios pueden experimentar una vibración en el volante, escuchar un sonido inusual o sentir algo anormal al girar el volante. Las terminals exteriores afectadas son las siguientes:

Nombre del producto Marca Logotipo del producto Número de pieza Código de fecha
Outer Tie Rod CTR ES3353 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES2600R OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES800525 OB, OC, OD, or OE
Outer Tie Rod CTR ES800530 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES4030 OB, OC, OD, or OE
Outer Tie Rod CTR ES4031 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES4089 OB, OC, OD, or OE
Outer Tie Rod CTR ES4090 OB, OC, OD, or OE
Outer Tie Rod CTR ES3655 OB, OC, OD, or OE
Outer Tie Rod CTR ES3567 OA, OB, OC, OD, or OE
Outer Tie Rod CTR ES3713 OA, OB, OC, OD, or OE

 

Si su terminal exterior todavía está en su caja, el nombre DURALAST® esta puesto en el exterior de la caja.

 

CAPCO está retirando todas las terminales exteriores que lleven el logotipo CTR con cualquier código de fecha que se muestra en la tabla anterior. El logotipo CTR y el código de fecha de terminal exterior se pueden encontrar en el extremo de la terminal. El vehículo debe levantarse mecánicamente bajo la supervisión de un mecánico calificado para ver el extremo de la terminal exterior.

 

¿Qué debe hacer?

  • Si usted cree que posee un vehículo equipado con una terminal exterior afectada, póngase en contacto con nuestro centro de servicio al cliente al 1-877-597-9588 y proporcione la información del propietario adecuada para obtener su terminal exterior inspeccionada y reemplazada LIBRE DE CARGO. Si ya ha incurrido gastos para remediar la terminal exterior afectada antes de recibir este aviso, llame a nuestro centro de servicio al cliente para ver si es elegible para un reembolso.
  • La reparacion tomara aproximadamente 45 minutos.
  • Si su terminal exterior comprada en AutoZone aún no se ha instalado en un vehículo, póngase en contacto con nuestro centro de servicio al cliente al 1-877-597-9588 y proporcione la información del propietario adecuada para obtener su terminal exterior afectada, reemplazada LIBRE DE CARGO. 
  • Si tiene más preguntas sobre el proceso gratuito de inspección, reparación gratuita o reembolso, llame a nuestro centro de atención al cliente al 1-877-597-9588.

 

¿Qué hacer si siente que recibió este aviso por error? 

Si ya no posee la terminal exterior comprada en AutoZone o el vehículo en el que puede estar instalada, llame a nuestro centro de servicio al cliente al 1-877-597-9588 con la información del nuevo propietario.

 

¿Qué hacer si tiene más preguntas o preocupaciones? 

Llame a nuestro centro de servicio al cliente al 1-800-555-5555. Si después de haber intentado aprovechar este retiro de seguridad, todavía no está satisfecho, puede presentar una queja al Administrador, Administración Nacional de Seguridad del Tráfico en Carreteras, 1200 New Jersey Avenue, SE, Washington, DC 20590, o llamar al Línea directa de seguridad del vehículo al 1-888-327-4236 (TTY 1-800-424-9153), o vaya a https:// www.safercar.gov.

 

Pedimos disculpas por este inconveniente. Sin embargo, nos preocupa su seguridad y satisfacción continua.

 

Sinceramente,

Tsuyoshi Nakao, Vice President


1 Affected Product

Equipment

BRAND PART NO. PRODUCTION DATES
CTR OUTER TIE ROD 01/01/2019 – 05/31/2019

 


12 Associated Documents

Recall 573 Report – Amendment 1

RCLRPT-19E054-6757.PDF 214.712KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.68 KB]

 


Defect Notice 573 Report

RCLRPT-19E054-5845.PDF 214.232KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.21 KB]

 


Recall Quarterly Report #3, 2020-2

RCLQRT-19E054-8864.PDF 211.305KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.35 KB]

 


Recall Quarterly Report #2, 2020-1

RCLQRT-19E054-1629.PDF 211.22KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall 573 Report – Amendment 2

RCLRPT-19E054-4014.PDF 214.761KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.73 KB]

 


Recall 573 Report – Amendment 3

RCLRPT-19E054-5423.PDF 214.784KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.75 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19E054-1982.pdf 262.354KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [256.21 KB]

 


Recall 573 Report – Amendment 4

RCLRPT-19E054-1856.PDF 214.831KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.80 KB]

 


Recall Acknowledgement

RCAK-19E054-3988.pdf 245.731KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.97 KB]

 


Recall Quarterly Report #1, 2019-4

RCLQRT-19E054-6349.PDF 211.115KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Recall Quarterly Report #5, 2020-4

RCLQRT-19E054-0810.PDF 211.518KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.56 KB]

 


Recall Quarterly Report #4, 2020-3

RCLQRT-19E054-6147.PDF 211.408KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.45 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19E054&docType=RCL

 


 

Bestseller No. 1
Lisle 58100 Inner Tie Rod Tool Set, 12 Pc
  • The long socket slips over tie rod end and crows footengages on socket for easy removal and installation of tierods with inaccessible wrench flats.
  • Includes 12 crowsfeet, sizes 1-3/16", 1-1/4", 1-3/8", 1-1/2", 1-5/16", 1-7/16", 29mm,32.5mm, 33.6mm, 38.4mm, 40mm and 42mm
  • fits many cars, trucks and SUVs.
  • fit type: Vehicle Specific
SaleBestseller No. 2
VEVOR Inner Tie Rod Tool Kit, Inner Tie Rod Tool Set with 12 Pcs Crowfoot Adapters, 1/2 Inch Drive Tube Tie Rods Tool, Heavy-Duty 13 Pcs Steel Inner Tie Rod Removal Tool for Vehicle Repair
  • Universal Tie Rod Removal Tool: Designed for secure and effectual removal of the inner rod. The inner rod can be easily removed and installed without removing the rack and pinion. Applicable to most domestic and imported vehicles, including cars, pickups, and off-road vehicles.
  • All-steel Forged: Our tie rod drawing tools and adapters are made of durable, all-steel forging that ensures long-lasting use. The flexible sliding collar on the sleeve's top securely holds the crowd feet adapters in place, while its compatibility with 1/2" drive wrenches allows you to install parts that ordinary wrenches cannot handle. Additionally, the knurled handle provides a firm grip for optimal control at all times.
  • 12 Pcs Crowfoot Adapters: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/ 16", 1-1/2" and 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, 42 mm. To get all your work done quickly and efficiently.
  • Hassle-Free Operation: The entire operation is effortless. Step 1: Slide the adapter on the plane of the lever. Step 2: Rotate the collar to fix the fishtail joint in place. Step 3: Use a 1/2 inch ratchet or impact wrench to the end hole.
  • Effortless Organization: The product is equipped with a case to facilitate your orderly storage and is convenient for you to carry. Help you deal with emergencies of vehicle repair at any time.
SaleBestseller No. 3
OEMTOOLS 27178 Master Inner Tie Rod Tool Set, Remove & Install Tie Rods in Cars, Pickups, and SUVs, Includes 12 Crowfoot Adapters & 1/2 Inch Drive Tube
  • INNER TIE ROD REMOVAL TOOL SET: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2" and 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, 42 mm; Easily remove most inner tie rod ends
  • ULTRA DURABLE: Tie rod puller tool's crowfoot adapters are nickel plated for durability; Work the inner tie rod tool kit on your tierod end with the confidence that your tie rod set won't bend or break during use; Get the most from our tie rods tool
  • WIDELY USEFUL INNER TIE ROD TOOL: Be sure you have an inner tie rod kit that can easily reach your inner tie rod without removing the rack and pinion; Tube handle inner diameter is 2.125 in. to service small cars, pick-ups, and SUVs
  • USE A RATCHET OR BREAKER BAR: Properly torque the inner tie rod remover on the tie rod end without hassle; Tie rod end puller's 1/2 Inch drive tube handle makes it easy to remove and re-install tie rod ends; Tie rod puller kit gives you proper reach
  • EFFORTLESS ORGANIZATION: OEM Tools inner tie rod tool can be taken anywhere easily; Tie rod end removal tool comes in a blow mold case for easy organization; The inner tie rod end tool is portable for use on tie rod inner ends on your family's fleet
SaleBestseller No. 4
OMT 5pc Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (BL06)
  • 1. ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
  • 2. HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
  • 3. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
  • 4. PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
  • 5. ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
Bestseller No. 5
Orion Motor Tech Inner Tie Rod Removal Tool Kit, Inner Tie Rod Tool for Tie Rod Removal and Installation, Master Inner Tie Rod Tool Set with 12 Crowfoot Adapters 1/2 Inch Drive Tube
  • INNER TIE ROD REMOVAL TOOL: This Orion Motor Tech inner tie rod removal tool set lets you remove and install inner tie rods without removing the rack and pinion; the 1/2 Inch drive tube handle with a 2.1 in inner diameter allows servicing on small cars, pick-ups, and SUVs
  • 12 CROWFOOT ADAPTERS: The 12 crowfoot adapters cover most common SAE and metric sizes of 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, and 42 mm
  • UNIQUE DESIGN: Our inner tie rod remover's 20 inch tube handle lets you remove and install inner tie rods in places where sockets and wrenches can’t fit; works on inner tie rods with inaccessible wrench flats
  • SUPERIOR DURABILITY: Our tie rod drawing tools and adapters are steel forged for lasting strength; the flexible sliding collar at the top of the sleeve tightly attaches the crowd feet adapters
  • HASSLE-FEE OPERATION: Thanks to intuitive design and clear instructions our rod removal set is easy to use; select the right adapter, slide it over the tie rod, click the tool and adapter together, then use a 1/2 inch ratchet or impact wrench to remove the rod
SaleBestseller No. 6
OTC (6275) Tie Rod/Pitman Arm Adjusting Set
Bestseller No. 7
Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
  • ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
  • HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
  • PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
  • ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
Bestseller No. 8
ABN 1/2 Inch Drive SAE Inner Tie Rod Removal Tool Kit – Inner Tie Rod Tool Set with Tie Rod Puller Tool and 3 Adapters
  • [Perform Maintenance on Your Vehicle]: The ABN Master Inner Tie Rod Tool Removal 4-Piece Kit allows you to save time to make adjustments without removing the rack and pinion to access hard-to-reach tie rods
  • [For Your Toolkit]: With its 1/2-inch square drive, this tie rod remover tool will work with your existing 1/2-inch drive wrench (not for power tools); Constructed from black coated steel for maximum strength and longevity
  • [Fits Your Vehicle]: 1 3/16-inch adapter compatible with most front wheel drive (FWD) vehicles with new style tie rods; 1 5/16-inch adapter compatible with most rear wheel drive (RWD) and vehicles with racks and pinion power steering; 1 7/16-inch adapter compatible with most cars with saginaw in steering gear
  • [Easy Storage]: No need to worry about tie rod end removal tool kit parts getting lost in your workshop; Heavy-duty 16.75 x 2.25 x 7.5 inch (42.5 x 5.7 x 19.1cm) plastic blow-molded carrying case with 2 latches and built-in handle for easy transportation, safe storage, and quick organization
  • [Package Contents]: Tie rod end removal tool set includes (1) dual socket rapid slide collar inner tie rod tool (1‐3/16-inch and 1‐5/16-inch hex), (3) adaptors (1‐3/16, 1‐5/1, 1‐7/16 inch adapters with 1‐5/16 inch hex), and (1) carrying case for your convenience
Bestseller No. 9
Orion Motor Tech Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, 3pc Heavy Duty Pitman Arm, Tie Rod Puller, and Ball Joint Removal Tool Kit with Case
  • FRONT END SERVICE KIT: This 3 piece ball joint removal tool set from Orion Motor Tech includes lever and scissor style ball joint separators and a conical pitman arm puller so you can quickly and safely remove standard pitman arms, outer tie rods, and ball joints without the damage often caused by hammers and pickle forks
  • VERSATILE FITMENT: The pitman arm tool has a 0.8" (20mm) jaw spread and depth; the levered ball joint separator has a 0.9" (21.6mm) jaw spread, 0.8" (19.5mm) jaw depth, and 2.2" (55mm) max opening; and the scissor-style ball joint puller & tie rod end tool has a 0.8" (19mm) jaw spread, 1.3" (33mm) jaw depth, and 2.1" (52.5mm) max opening
  • NEAR UNIVERSAL COMPATIBILITY: These rugged and highly adjustable ball joint separator tools fit the steering and suspension systems of hundreds of makes and models, including most American, European, and Japanese cars, light trucks, SUVs, and ATVs
  • POWERFUL LEVERAGE: Our heat-hardened alloy steel tools and their forcing screws coated in corrosion-resistant black oxide will give you outstanding durability and performance, so your ball joint kit will have the strength to remove even the most stubborn, stuck, and seized parts time after time
  • CONVENIENT ORGANIZATION: The custom molded case is crafted from ABS hard plastic for the amateur or professional mechanic on the go; never miss a job, with everything well organized for storage or transport
Bestseller No. 10
Toolwiz Inner Tie Rod Removal Tool, 3/8'' Universal Low Profile Tool and Inner Tie Rod Hex Wrench Repair Removal Tools 27-42mm Tie Rod End Wrench Tool with 1/2" Drive Universal Tie Rod Tool Kit Black
  • Tool 1: Toolwiz 3/8" Inner Tie Rod Tool turns tie rods easily. Able to remove the inner tie rod without removing the outer tie rod. Convenient tool for servicing inner tie rods to easily remove, repair & install
  • Tool 1: Suitable for all standard tie rods with smooth cylinder ends; It will work on any rod that fits between the 3'' top and bottom components with both 9/16” nuts screwed on and tightened
  • Tool 2: 1/2" Square drive tie rod removal tool by Toolwiz is suitable for tie rods between 27mm and 42mm in diameter. Easily removes inner tie rod ends without removing the rack and pinion
  • Tool 2: Toolwiz Tie rod end remover tool is designed to universally fit for all vehicles and is compatible with Mercedes, Benz, BMW, Toyota, Honda, Ford, Nissan, etc.
  • Strong Grip Force: The teeth of the inner tie rod tool firmly grip the tie rod as you insert a socket wrench or breaker bar and turn it as needed, No more trouble taking the inner tie rod off your rack and the pinion. Very sturdy and bites into the tie rod nicely

Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...