| “This site contains affiliate links for which OEMDTC may be compensated” |
August 22, 2019 NHTSA CAMPAIGN NUMBER: 19V620000
Missing Backup Cameras/FMVSS 111
The lack of rear visibility increases the risk of a crash.
NHTSA Campaign Number: 19V620
Manufacturer Daimler Trucks North America LLC
Components BACK OVER PREVENTION
Potential Number of Units Affected 11
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2019-2020 Thomas Built Minotour school buses. The school buses may be missing backup cameras. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, “Rearview Mirrors.”
Remedy
DTNA will notify owners, and dealers will add a backup camera system, free of charge. DTNA issued owners an interim notification date on October 11, 2019. The recall began December 23, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-825.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Recall Campaign
Daimler Trucks
North America LLC
December 2019
FL825A
NHTSA #19V-620
Subject: TBB Minotour Backup Cameras
Models Affected: Specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Thomas Built Buses (TBB), has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.
There are 11 vehicles involved in this campaign.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
A backup camera system will be installed. Thomas will contact the dealers who will do the work directly.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Work instructions will be provided in the installation kits.
Replacement Parts
Installation kits for backup camera systems have been sent directly to the specific dealers who will install them on the affected buses. If you have not been contacted by TBB, your location will not be performing this recall.
Removed Parts
Please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts.
Labor Allowance
Table 2 – Labor Allowance
| Campaign Number | Procedure | Time Allowed (Hours) | SRT Code | Corrective Action |
| FL825A | Install backup camera and mirror video monitor | 1.0 | 996-R002A | 12 – Repair Recall/Campaign |
Table 1
Claims for Credit
You will be reimbursed for your parts, labor, and handling by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL:
- Claim Type is Recall Campaign.
- In the Campaign field, enter the campaign number (FL825-A )
- In the Primary Failed Part field, enter 25-FL825-000.
- Enter nothing in the Parts section.
- In the Labor section, enter the appropriate SRT from the Labor Allowance Table.
- The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
- U.S. and Canada – Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following:
- Accept the documentation of the previous repair.
- Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement.
- Submit a Recall Pre-Approval request for a decision and authorized amount.
- Submit a “based on” claim for the approved pre-approval.
- Attach the documentation to the pre-approval request.
- When your claim is paid, reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed.
If you have any questions or need additional information, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com / WSC.
A sample letter notifying vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days.
Copy of Notice to Owners
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
A backup camera system will be installed.
This is the second letter regarding this recall. The repair is now available. Thomas Built Buses will provide backup camera kits to your local dealer. The dealer will contact you to schedule an appointment. The repair should take approximately an hour and will be performed at no charge to you.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. For further information, please contact the Warranty Department at (336) 889-4871, 8 a.m. to 5 p.m. Eastern Time Monday through Friday. To find a dealer in your area please go to www.thomasbus.com.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m to 4:00 p.pm, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety
Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
THOMAS BUILT BUSES WARRANTY DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your Thomas Built Buses authorized dealer concerning this matter.
Work Instructions
Subject: TBB Minotour Backup Cameras
Models Affected: Specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
IMPORTANT:
Work Instructions are included in the installation kits for the backup camera system. Thomas will contact locations directly if they will be performing this recall and provide the parts and instructions.
If Thomas has not contacted your location, you will not be performing this recall.
Recall Campaign
Daimler Trucks
North America LLC
December 2019
FL825A
NHTSA#19V-620
Work Instructions
Subject: TBB Minotour Backup Cameras
Models Affected: Specific Model Year 2019-2020 Thomas Built Buses Minotour SRW school buses manufactured August 17, 2018, through March 31, 2019.
Parts
Kit Contents:
The harness is supplied in three sections (see Figure 1):
- Monitor End – Marked A
- Extension – Marked B
- Camera End – Marked C
Mirror/Monitor Mounting
- Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires
- Remove the rear view mirror from the front glass, leaving the mounting block on the glass.
- Attach the mirror mount to the back of the mirror/monitor. Ensure correct orientation.
- Install the mirror/monitor and mount on the windshield using the existing mounting block. Tighten with the Allen wrench. See Figure 2.
- Connect the orange-taped end of Section A of the harness to the pigtail from the mirror/monitor. See Figures 2 and 3.
When routing is complete, connect ground to rafter
Connect green and red wire, then tie to the red wire on the extension harness (B)
Connect this end to the mirror/monitor
Connect the harness extension (B) to this video plug
V1 IN – do not connect
- Install loom on this entire section.
- Feed this end through the bulkhead hole with all other switch harnesses.
- Pull the harness out near the windshield and over to the mirror/monitor so it feeds down in a straight line.
- Connect the pigtail and harness; tuck excess up into the bulkhead.
- Route harness Section A toward the main body harness. Use a method that supports the harness.
Camera Mounting
- Drill a 5/8-inch hole approximately 1 inch below the horizontal centerline, as shown in Figure 4.
- Remove the nut from the back of the camera and retain. Feed the wire from the back of the camera into the bulkhead.
- Attach the double-sided tape to the camera and then the camera to the rear cap, centered over the drilled hole. Ensure the camera faces down and is level horizontally.
- Feed the nut along the harness to the camera and tighten. Ensure the mounting of the camera does not move.
- Remove the harness covers above the windows on the driver’s side of the bus.
- Cover the camera harness with loom and route above the windows on the driver’s side of the bus. See Figure 5.
- Connect Section C of the harness as shown in Figure 6.
Connect to the plug from the camera
Connect to the extension harness (Section B)
Connect the red wire to the 12V wire on the reverse lights and to the red wire on the harness extension (Section B)
Connect the black wire to a solid ground or to a ground on the reverse lamp. The red wire from the extension harness (Section B) will install at the same location.
Use LW13 OR LW14 for reverse connection to the main harness.
- Connect the harness extension (Section B) yellow video plug with the red wire to the video plug on the main harness. It may be installed in either direction. Note: Do not use the AV1 section of the main harness.
- Tie up excess wiring evenly along the main harness.
- Check for proper operation of the backup camera.
- Install the harness cover and bulkhead cover removed earlier.
Daimler Trucks
North America LLC
December 2020
FL825A
NHTSA #19V-620
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour school buses manufactured August 17, 2018, through March 31, 2019.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
A backup camera system will be installed.
This is the second letter regarding this recall. The repair is now available. Thomas Built Buses will provide backup camera kits to your local dealer. The dealer will contact you to schedule an appointment. The repair should take approximately an hour and will be performed at no charge to you.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m to 4:00 p.pm, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
THOMAS BUILT BUSES WARRANTY DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Thomas Built Buses dealer.
Please speak with your Thomas Built Buses authorized dealer concerning this matter.
Daimler Trucks
North America LLC
October 2019
FL825A
Interim Recall Notice
NHTSA #19V-620
IMPORTANT SAFETY RECALL
See Enclosed VIN List
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, Inc., has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour school buses manufactured August 17, 2018, through March 31, 2019, without a backup camera.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. The repair is being validated and parts are being procured. You may continue to operate your vehicle.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Thomas Built Buses dealer to schedule the Recall for your vehicle.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: (800) 424-9153); or to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-825
Date of Submission: August 22, 2019
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: 0 Safety Defect X Non-Compliance
Vehicle Information
Model Yr. Start: 2019
Make: Thomas Built Buses
Model: Minotaur
Production Dates: Begin: 08/17/2018
Descriptive Information:
Model Yr. End: 2020
End: 03/31/2019
Certain school buses within the referenced above dates may have missing backup cameras.
Number potentially involved: 11 Estimated percentage of involve with defect: 100%
Defect/ Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
A display of rearview image per FMVSS 111 was not provided on select vehicles.
If a noncompliance, provide the applicable FMVSS:
FMVSS 111
Describe the safety risk:
Lack of rear visibility on certain vehicles as required by FMVSS111 can increase the risk of a backover
crash, particularly those involving vulnerable populations.
If applicable, identify the manufacture of the defective or non~ompliant component.
NA – component missing due to specification error.
Chronology of Defect/ Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
July 18, 2019 DTNA became aware that certain vehicles in the field may not have been equipped with a
backup camera. DTNA began an investigation to identify the root cause for this omission and to review
the FMVSS requirements. August 16, 2019, DTNA, with an abundance caution decided to conduct a
compliance recall.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Vehicles will be repaired by adding a backup camera system. Repairs will be performed by Daimler Trucks
North America authorized service facilities. Copies of the reimbursement plan will be submitted as a
supplemental report when available.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date:
Planned Dealer Notification End Date:
Planned Owner Notification Begin Date:
Planned Owner Notification End Date:
10/20/2019
10/20/2019
10/20/2019
10/20/2019
Manufacture’s identification code for this recall (if applicable): FL-825
DTNA Representative;
~~
Andy Jones
Manager
Compliance and Regulatory Affairs
*************************************************
The information contained in this letter supercedes and supplements any related policies and procedures in any previously
released bulletins, the Warranty Manual, and/or previously released letters. Failure to read or distribute this letter will not
exempt addressees from compliance with the information contained herein.
Page 1 of 4
Daimler Trucks North America LLC
REF #:
ICI19-054
Effective:
10/7/2019
Release:
10/7/2019
SUBJECT:
TBB FL825 – Interim Recall Notice
This letter is to inform you that an interim recall notice will be sent to affected customers for upcoming recall FL825 ~ TBB Minotour Backup Cameras. The interim notices will mail approximately October 11, 2019. A copy of the notice follows for reference.
This notice is for informational purposes only. There is no action for customers or dealers to take at this time. If customers inquire, please refer them to the interim recall notice and let them know the recall will begin when all preparations are completed.
If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC Link on DTNAConnect.
WARRANTY CAMPAIGNS DEPARTMENT
P.O. Box 4090
800-547-0712
Portland, Oregon 97208-4090
ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager
Freightliner Dealers – U.S. and Canada
Western Star and Sterling Dealers – U.S. and Canada
FCCC Dealers – U.S. and Canada
Direct Warranty Customers – U.S. and Canada
Export Distributors
If you have questions about this Letter, please submit your inquiry on the Web using the WSC Link on DTNAConnect
Daimler Trucks
North America LLC
October 2019
FL825A
Interim Recall Notice
NHTSA #19V-620
IMPORTANT SAFETY RECALL
See Enclosed VIN List
Subject: TBB Minotour Backup Cameras
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC, on behalf of its wholly owned subsidiary, Thomas Built Buses, Inc., has decided
that a defect which relates to motor vehicle safety exists on specific Model Year 2019-2020 Thomas Built Buses Minotour school buses manufactured August 17, 2018, through March 31, 2019, without a backup camera.
On certain buses, a backup camera should have been installed per FMVSS 111 – Rearview Mirrors. Lack of rear visibility can increase the risk of personal injury, particularly for vulnerable populations.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. The repair is being validated and parts are being procured. You may continue to operate your vehicle.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Thomas Built Buses dealer to schedule the Recall for your vehicle.
If you have any questions about this recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic
Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at
(888) 327-4236 (TTY: (800) 424-9153); or to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Daimler Trucks North America LLC
Thomas Built Buses, Inc.
1408 Courtesy Road
High Point, NC 27260
800.547.0712 Phone
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| THOMAS BUILT BUSES | MINOTOUR | 2019-2020 |
11 Associated Documents
Interim Owner Notification Letter(Part 577)
RIONL-19V620-4834.pdf 66.655KB
Loading...
Reload document 
Open in new tab
ISSUED Owner Notification Letter(Part 577)
RCONL-19V620-6378.pdf 60.042KB
Loading...
Manufacturer Notices(to Dealers,etc)
Loading...
Recall Quarterly Report #1, 2019-4
RCLQRT-19V620-2568.PDF 211.142KB
Loading...
Recall Quarterly Report #2, 2020-1
RCLQRT-19V620-5224.PDF 211.238KB
Loading...
Recall Acknowledgement
RCAK-19V620-7854.pdf 244.674KB
Loading...
Non-Compliance Notice 573 Report
RCLRPT-19V620-4572.PDF 212.58KB
Loading...
Miscellaneous Document- 573 Defect Information Report
RMISC-19V620-8593.pdf 580.925KB
Loading...
Remedy Instructions and TSB
RCRIT-19V620-1181.pdf 421.154KB
Loading...
Remedy Instructions and TSB
RCRIT-19V620-4219.pdf 118.687KB
Loading...
Recall Quarterly Report #3, 2020-2
RCLQRT-19V620-6577.PDF 211.321KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V620&docType=RCL
- [ Easy to Install ]: S01 back up camera systems for car only takes 30 minutes from start to finish for installation with our plug-and-play system, saving you time and cost.
- [ Stable Signal ]: As a wired backup camera kit, there are no issues with signal instability like other backup camera for car may have, ensuring real-time transmission.
- [ HD 1080P Image ]: The backup camera for truck with 4.3inch screen features HD 1080P pixels and performs exceptionally well during both daytime and nighttime, delivering crystal-clear images.
- [ 100% Waterproof reverse camera for car ]: With an IP69 waterproof certification, this back up camera systems for truck can withstand even the harshest weather conditions and continue to function perfectly.
- [ DIY Guidelines ]: The backup cameras for vehicles can adjust the guidelines both vertically and horizontally in terms of width and narrowness to suit the camera's installation location, ensuring precise reversing security.
- 【Plug and Play】The backup camera for car takes only 15 minutes from start to finish installation, just 2 steps: ① First connect the camera and monitor through the 4-pin video power cable made of 3.0MM pure copper that comes with the camera. ② Then plug the reverse camera system into the cigarette lighter or USB plug (not included), manual switch, plug and play. Or you can also connect it to the reversing lights only as a reversing use, automatically triggering the reversing image when reversing.
- 【Stable Signal Transmission】 The wired backup camera kit is superior in signal stability compared to the wireless backup camera. The backup camera for truck will automatically minimize energy loss during transmission, not only will there be no signal delays, interference, fluctuations or intermittent problems, but also realize the transmission of real-time data, providing you with HD 1080P color images at all times, to ensure safer driving.
- 【100% Waterproof】The back up camera for cars housing is made of ABS-TC material and also utilizes the latest nano-coating sealing technology with IP69 level waterproof performance, which is able to work perfectly and provide clear images in extreme environments from -22°F to 176°F. This back up camera is like a brave guardian, not eroded by any water or fine particles, tenaciously resisting the baptism of wind/rain/dust/high and low temperatures, enhancing the safety index and service life.
- 【Ultra HD Picture Quality & Night Vision】The truck backup camera adopts advanced optical anti-shaking technology with SC1346 color image sensor chip to avoid the problem of shaky and blurred images when driving on bumpy roads. The rear view camera has 6 built-in white LEDs, anti-halo chip and 650 filter chip, which will automatically switch to night vision function according to the intensity of the light, providing HD 1080P resolution color images both day and night to ensure your driving safer.
- 【Latest Design】The car backup camera housing is made of ABS+PC metal raw material with 4.3 inch LCD display, easier to use than 7 inch and 5 inch, image is more focused and clearer, the weight won't look bulky and won't block the driver's view in front. The reverse camera for car suction cup bracket is made of ABS+TPU material, 360° rotating design, more stable than normal bracket to mount the display on dashboard or windshield, won't melt and fall off even after long time use and sunlight.
- Excellent License Plate Wired Backup Camera: Designed for car,Pickup Truck,SUV,Minivan and Sedans. Work well on old cars,new cars or used cars.
- Universal Rear View Camera: Suit for 12-24V DC Power, 26ft RCA video cable. Support connectivity with radios, DVD players, OEM navigators, or any display with RCA video inputs.
- Crystal Clear Image & Nice Night Vision: 6 glass lenses, 100% true color reproduction, the latest upgraded chip, generate clear real-time video. 10 LED lights automatically fill the light when powered, get a great color image in the dark for safe reversing and driving.
- Easy to Install: Suit for 12-24V DC Power. Just need to connect camera's power to reversing light, then connect the camera to your radio, screen or monitor by 26ft AV cable. Complete accessories and easy installation save our time.
- IP69K Waterproof Camera: The camera is made of hard metal housing high-density impermeable material with efficient dustproof, shockproof and waterproof performance to ensure the camera lasts for a long time.
- Backup camera with IP69K waterproof IP rate.It designed with fully sealed glue filling craft, so it waterproof function is better than IP67 and IP68, you absolutely no need to worry about water, fog or mist inside. NOTE: please separately order a suitable harness to complete installation if connect it to a factory radio/screen.
- Rear view camera with a latest HD 600TVL 1/2.7inch image sensor and 170 degree super wide viewing angle lens, that's great for you to check the invisible blind spot clearly and make parking safe and simple.
- Reverse camera housing is metal,small size and OEM style design. Also it is built in multifunctional switching loops function,you can switch it to be front view, also support guide line on/off switching and cut the purple loop to choose a vertical down-ward view from like a tailgate down view(tailgate mounting).
- Backup camera can fit most types of DC 12-24V different length vehicles. Such as Cars, Pickup Trucks, SUVs, Vans, RVs, etc. It with great night vision (low illumination level: 0.01Lux).
- Customer satisfaction is our top priority. NATIKA offer 30 days money back guarantee,24 months replacement warranty,lifetime support guarantee and 7 days-24 hours professional customer service and technical support.
- 【Significant Upgradation】When we design this car backup camera, we not only require the outstanding images, but also the stunning performance in bright or dark light. Signal stability, waterproofness, durability, installation,etc. are all greatly improved.PixelMan back up camera will assist you get a pleasant drive, this car rear camera is indispensable for you,isn't it?
- 【Powerful Sensor Chip and Precise Lens】PixelMan car rear camera adopts superb 1/2.7 inch large sensor chip made in Japan,170 degree wide view angle fisheye lens,1.4mm aperture,plus the noise reduction and powerful image processing capability,all this ensure excellent images in various light environment. PixelMan rearview camera for car uses pure copper shielded cable which enhances the signal stability during long-distance transmission.
- 【Metal Housing,Remarkable Waterproof IP69】PixelMan reversing camera for license plate adopts a sturdy metal housing,and Nano sealant infusion, our rear camera can be even immersed into water for one year without worrying about, this is unmatched by backup camera with plastic housing, because the plastic will age more speedy due to thermal expansion and contraction.
- 【Effortless Installation】PixelMan reverse backup camera comes with 2 brackets supporting 2 installation options. The license plate bracket can realize the hidden installation. The cable of our car rear view camera has mini size 4 Pin connector, it is easier to pass through the vehicle body compared to the bigger RCA connector. Our power cord uses very thick copper core wire, it is easier to connect. Installation tools and accessories are included in the package.
- 【Three Years After-sales Support】Each of our license plate backup cameras has been tested, any question after receiving this rear view camera, contact our Customer Care according to your user manual, and we will respond fast. 30 days refund and 36 months replacement, we never let you has any loss, please order it with confidence!
- 【Ultra HD Screen & Accurate Color】The backup camera is designed to eliminate blind spots and avoid obstacles when reversing. 680P Ultra HD picture shows a clear image for the driver. No more annoying blurry discoloration screen and picture, and displays the most ideal road condition.
- 【12 LED & Superior Night Version】12 LED super bright lights illuminates the images when daylight is low, and greatly enhances night vision with sharp images. The sensor will turn on the light automatically when you activate the reverse gear, which gives you the best view for parking.
- 【IP68 Waterproof & 140° View Adjustable Angle】The camera will be protected from powerful jets of water from any direction, such as rain and a car wash. Works well in extreme weather. Adjustable vertical 140° perfect viewing angle, which allows you to adjust the camera to a position that’s best for you, effectively reducing the accident rate.
- 【2 in1 Installation & Tools Included】Camera can be installed on license plate frame, or mounted on back, front, and side based on your preference. The camera or its mounting bracket will not take a lot of space on your license plate. Suitable for most 12V-24V vehicles, such as Jeeps, SUV, RV, VAN, etc.
- 【Best Customer Service】INCLAKE backup camera is guaranteed to provide a safe road trip.Feel free to contact us if you have any issues with the item.
- 【Continuous Upgraded 1080P AHD Backup Camera】After launching three car backup cameras, PixelMan further upgrade and launch the new reversing camera PMD2A-S. This car camera use the latest chip special for reversing camera made in Japan, this chip not only has excellent image output, but also has stunning performance under strong light and dark light. Strict in details and only make the best products is what PixelMan pursues. It is also essential to you, isn't it?
- 【Support HD and AHD switching】This upgraded back up camera even supports HD and AHD switching. Each optimization improves the definition, signal stability, waterproof performance, durability, installation, etc. Our vehicle backup camera can be switched to AHD signal output to achieve 1080P display (Under the premise that the screen supports AHD signal).
- 【1/2.7in AHD 1080P Large Chip Adopted in This Reverse Cam】The chip size determines the amount of reversing camera output pixels, compared with 1/4in chip used in ordinary backup cam, the most apparent feature is the enhanced brightness and color saturation besides of the sufficient clarity. The colors become more vivid and true, the increased brightness makes the images more clearly, meanwhile, the night vision effect also be enhanced, you can back the car easily without extra light at night.
- 【170° Wide Angle Optical Glass HD Lens】The lens is the core component of the reverse camera for car. The HD lens used in PMD2A-S wide angle backup camera is very different from ordinary lens in appearance, it has a larger aperture and a stronger sense of technology. High transmittance glass, fish eye appearance, F1.4 aperture, all these features directly determine the wide angle, maximum output pixels and night vision performance of the license plate camera.
- 【Back Up The Car Easily】Whether it is day or night, you can see almost everything behind the car when reversing, PixelMan camera for car reverse will let your driving easier and safer. Isn’t it what you need?
- Wide Angle - 170-degree wide angle view for maximum visibility behind your vehicle. Back up with confidence knowing that you are getting the whole picture. No more uncertainties!
- Resolution - With a resolution of 640 x 480, you will be sure to see everything in crisp, clear detail
- Guide Distance - Unique distance guide lines on the image repeat object’s distortion and help to control the distance to obstacles from any angle
- Visibility - The LPCB40 Has a Lux rating of 0.5 so that the camera can see better in the dark. For example, a camera with a 0.5 Lux rating is much better in low light conditions than a camera with a 1.0 Lux rating
- Weatherproof - Specially outfitted for the elements with an IP68 rating, this backup camera laughs at a forecast with a rainy outlook. The internal parts are protected against water and moisture, making it a great choice for peace of mind driving
- ►【Easy Installation in 8 Mins】The waterproof camera and HD monitor are powered by one power supply, No need to power the camera and monitor separately, just connect the monitor to a cigarette lighter adapter/Acc/fuse etc, then wire the camera and monitor. Plug and Play - Much less installation effort than wireless rear camera systems.
- ►【Wired Back up Camera, Stable Signal Transmission】The wired reversing camera kit has more stable transmission and will not lose signal at any time. If your wireless backup camera is always intermittent and delayed, a wired camera is a reliable companion for every drive. The rv backup camera connects directly to the monitor via a 66ft cable and is widely used on trailer, truck, tractor, bus, rv, van, suv and more.
- ►【Clear Night Vision & 150° Non-fisheye distortion camera】True IR night vision greatly enhances the image, and the back up camera works even with minimal light around, allowing you to identify objects in the dark. 150 Degree Wide Viewing Angle - Non-fisheye distortion camera, great for lane changing and nighttime backing up and parking in narrow alleys.
- ►【7 inch IPS HD Monitor & Anti-Glare Sunshade】The 7" IPS display offers clearer and more vibrant color images, along with a wider viewing angle that maintains image consistency from various directions. Compare other screens, it reduces glare and flicker during long drives, making it easier on the eyes. Additionally, the backup camera for truck includes a sunshade for improved visibility in strong sunlight.
- ►【"Real Neck Saver" with Parking Guidelines and Image Flip】Reliable parking lines and image flip for fast and perfect reversing without having to turn around all the time, no more neck pain. Even if you sometimes have trouble figuring out the steering, just switch to the "mirror" view on the monitor, making you at ease when reversing.
- 🚗Quick and Easy Installation - With simple plug and play connections, N11 backup camera can be installed in just 30 minutes.
- 🚙Crystal Clear Picture Quality - backup camera for car features 6 high-quality glass lenses, providing super high resolution and clear images to ensure you have complete confidence while in reversing.
- 🚗100% Waterproof - back up camera has an IP69K waterproof rating, ensuring reverse camera can withstand any harsh weather conditions such as rainy snowy or hot conditions.
- 🚕Enhanced Night Vision - vehicle backup cameras is equipped with LED lights that provide a clear view in low-light conditions, making it easier for you to back up/front in the dark.
- 🚙Hidden Metal Bracket - The reverse camera for car bracket is hidden behind your license plate, creating a sleek and unobtrusive appearance.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.