“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10162031
Manufacturer Communication Number: IK0500038
Summary
Steering intermittently goes into a shimmy after hitting a bump.
17 Affected Products
Vehicles
MAKE | MODEL | YEAR |
INTERNATIONAL | LONESTAR | 2016-2019 |
INTERNATIONAL | LT | 2016-2020 |
INTERNATIONAL | PROSTAR | 2016-2019 |
INTERNATIONAL | RH | 2016-2019 |
SEOCONTENT-START
Less Info
Countries:
RUSSIA, AUSTRALIA, BAHAMAS, BOLIVIA, BRAZIL, BELIZE, CANADA, CHILE, TAIWAN, COLOMBIA, COSTA RICA, DOMINICAN REPUBLIC, ECUADOR, EL SALVADOR, TRINIDAD AND TOBAGO, UNITED STATES, URUGUAY, VENEZUELA, MEXICO, ARUBA, NICARAGUA, PERU, PUERTO RICO, CuraÁao, GUAM, GUATEMALA, GUYANA, HAITI, HONDURAS, JAMAICA, KOREA, SOUTH KOREA, NEW ZEALAND, PANAMA, SOUTH AFRICA
Document
ID:
IK0500038
Availability: ISIS, FleetISIS, IsSIR Revision: 19 Major System: STEERING SYSTEM Created: 8/15/2011 Current Language: English Last Modified: 6/10/2019 Other Languages: FranÁais, EspaÒol, Author: William
Knoth Viewed: 13657
Hide Details Coding Information Copy Link Copy Relative Link Bookmark Add to Favorites Print Provide Feedback Helpful Not Helpful View My Bookmarks 448 426 Title: Steering Shake, Shimmy, Shudder, Steering Vibration Applies To: Prostar/Lonestar and LT/RH with 14k front weight rated axles and below CHANGE LOG
Please refer to the change log text box below for recent changes to this article:
06/10/2019 – Added part number for Dana high friction bearing kit and updated diag steps to reflect this. 04/18/2019 – Updated link to IK1700017 and changed source of tire specs to the service manual
04/12/2019 – Added note for tie rod tube size limits. 01/18/2019 – Added note about only installing high friction bearing on drivers side. 12/05/2018 – Corrected Step 5 diagnostic path steps. DESCRIPTION
Steering intermittently goes into a shimmy after hitting a bump. SYMPTOMS
ï The steering system may go into a shimmy after hitting a bump or during a curve. Normally the vehicle speed will need to be reduced in order
to stop the shimmy. The symptoms may include a lateral (side to side) shake and possible oscillation of the steering wheel. ï Do not confuse this symptom with consistent shimmy when braking. Refer to IK0400102 and IK1300088. SERVICE PARTS INFORMATION
Kit Description Part Number Quantity
Required Notes Steering Stabilizer H60961167 1 For all front axles with 4 inch wide springs and tie
rod tubes of 1.75 inches or smaller in diameter. Longer Spring U-Bolts Source Locally 2 Needed on some applications to install the
steering stabilizer. Hendrickson Axles ONLY: Kingpin Service Kit H60961628 1 Complete kingpin service kit with one high friction
composite thrust bearing for the driver’s side Hendrickson Axles ONLY: Left
Side Kingpin Service Kit H60961629 1
Contains just bushing, seals, bolts and high
friction composite thrust bearing for the driver’s
side. Meritor 13-14K Axles ONLY: Kingpin Service Kit 2519476C91 1 Complete kingpin service kit with one high friction
composite thrust bearing for the driver’s side Meritor 13-14K Axles ONLY: Composite Bearing
2520212C91 1 Contains one high friction composite bearings with
seals and wedges. Meritor 12K Axles ONLY: Kingpin Service Kit 2519548C91 1
Complete kingpin service kit with one high
friction composite thrust bearing for the driver’s
side Meritor 12K Axles ONLY: Composite Bearing
2520213C91 1 Contains a high friction composite bearing with
seals and wedges. 2520702C91 1
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 1 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Dana Axles Only: Left Side Composite Bearing
Contains one high friction composite bearing, wedges and lash shims. Note:
If installed, only one high friction composite king pin bearing should be installed per vehicle and it
should be installed on the driver’s side. TROUBLESHOOTING
Step Action Decision
1
DIAGNOSTIC:
If the truck is an LT or RH and has a constant vibration above 50mph follow
IK1700017 and the LT service manual first.
Is this an LT or RH with a constant vibration?
Yes: Refer to IK1700017 first.
If IK1700017 has been completed
proceed to step 2.
No: Please proceed to step 2.
Step Action Decision
2
DIAGNOSTIC: Tires Pressure and Balance Under-inflated tires can cause poor handling, fast and/or irregular wear, decreased
fuel economy and permanent structural damage to the tire. Overinflating can reduce traction, braking ability and handling, as well as result in
uneven wear and an uncomfortable ride. Check front tire’s cold inflation pressures daily, for specification refer to owner’s manual. Uneven Wear: Check tread depth and note if tread is evenly worn. Minimum tread
depth is 3 mm (0.12 in) on front tires and 2 mm (0.08 in) on other tires. Look for cuts or other damage to the tread sidewalls. Wheel Balance: Ensure tires are properly static and dynamically balanced. For LoneStar LT/RH refer to the Truck Service Manual 0000885380. Use the Tire Data Recording document to record your findings Note: Retreads are not recommended as a steer axle tire. Do the tires meet the above criteria?
Yes: Please proceed to step 3.
No: Correct tire pressure, wear and
balance then re-evaluate for steering wobble.
Step Action Decision
3 DIAGNOSTIC: Tire Runout
Tire balance and runout are the primary factors in determining the likelihood of entering a shimmy event
Measure lateral and radial run out on all tires using the tire runout gage RN
4532000. Tire Runout Gage Instructions Navistar PN 4532000
Yes: Please proceed to step 4. No: Correct tire run out and reevaluate for steering wobble.
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 2 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Specification: LoneStar LT/RH refer to the Truck Service Manual 0000885380. All other vehicles: lateral and radial run out must be below .065″.
Is lateral and radial run out within specification?
Step Action Decision
4
DIAGNOSTIC: Alignment
Incorrect front axle alignment, specifically toe and caster, has been shown to be
large contributing factors in increasing the likelihood of entering a shimmy event. Before making any changes refer to IK0200023 Navistar Wheel Alignment Policy. Verify alignment using IK0200013-Suggested alignment target values. Verify that the correct caster refer to TSIñ12ñ02ñ01.
Is the alignment correctly set?
Yes: Please proceed to step 5.
No: Set the alignment using IK0200013
and reevaluate for steering wobble.
Step Action Decision
5 DIAGNOSTIC: Wheel Bearing End Play
Measure wheel bearing for excessive end play
Use a dial indicator to verify acceptable endplay of 0.001″-0.005″.
Yes: Please proceed to step 6. No: Replace or adjust the wheel bearings as needed and reevaluate for steering wobble. Refer to ConMet Service Manual
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 3 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Is wheel bearing end play in spec?
Step Action Decision
6
DIAGNOSTIC: Drag Link and Tie Rod End Play
Use a dial indicator and measure the vertical and horizontal end play of the tie rod
ends and drag link ends. Spec: less than 0.030 inches. Are the drag link and tie rod ends within specification?
Yes: Please proceed to step 7.
No: Replace the drag link and tie rod
ends as needed and reevaluate for steering wobble
Step Action Decision
7 DIAGNOSTIC: Spring Hangers, Cab Mounts, Engine Mounts and Frame Fasteners
Inspect the spring hangers, shackles, and bushing for looseness, play and fastener
torque.
Inspect cab and engine mounts for excessive wear, being degraded and/or
looseness.
Confirm fastener torque on all steering system, frame rail and crossmember, and
fuel tank mounting brackets/supports. Example of a loose fuel tank support.
Yes: LT/RH refer to 0000885380
Prostar/LoneStar refer to 0000863170
Repair, torque, or replace fasteners and
suspension components as needed and
reevaluate for steering wobble. No: Please proceed to step 8.
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 4 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Was anything found loose or damaged?
Step Action Decision
8
DIAGNOSTIC: Power Steering System. Determine if the power steering system has the correct fluid type (refer to
IK0500058), it is full of fluid, free of aeration and operating properly. Any issue found?
Yes: LT/RH refer to 0000885380
Prostar/LoneStar refer to 0000863170
Correct the power steering system and
reevaluate for the steering wobble.
No: Please proceed to step 9.
Step Action Decision
9
DIAGNOSTIC: Steering System Lash
With the engine off and the truck sitting on it tires, inspect for free play in the steering wheel. It should not exceed 2 inches of movement on an 18inch steering wheel with
no movement in the tires.
Inspect the steering shaft slip joint and u-joints for looseness. With a TRW gear: Verify steering gear lash per the TRW service manual. RH Sheppard gears are not adjustable and should not be tampered with.
Was anything found loose?
Yes: Replace any loose components and
adjust the TRW steering gear lash as needed per the TRW service manual,
then reevaluate for steering wobble.
No: Please proceed to step 10.
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 5 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Step Action Decision
10
DIAGNOSTIC: King Pin Vertical and Horizontal play
Measure the king pin for excessive vertical horizontal end play.
Confirm the type of axle installed and use a dial indicator to verify acceptable play
per supplier’s specifications. Meritor: MM-2
Dana: AXSM-0038
Hendrickson: 17730-252
Is King pin play out of specification?
Hendrickson: Yes: Install high friction composite kingpin
service kit H60961628 per Hendrickson manual 59310-011. No: Install the high friction composite
kingpin bearing only kit H60961629. If the
service kit is not available, install the
steering stabilizer H60961167 can be
installed in its place per the below
resolution. Proceed to step 11
Dana: Yes: Install a king pin service kit and the
high friction composite king pin kit
2520702C9. No: Install the high friction composite king
pin kit 2520702C91. If the service kit is not available, install the steering stabilizer H60961167 can be installed in its place
per the below resolution. Proceed to step 11
Meritor 12K: Yes: Install high friction composite kingpin
service kit 2519548C91 per TP1873. No: Install the high friction composite
kingpin bearing only kit 2520213C91. If
the service kit is not available, install the
steering stabilizer H60961167 can be
installed in its place per the below
resolution. Proceed to step 11
Meritor 13/14K: Yes: Install high friction composite kingpin
service kit 2519476C91 per TP1873. No: Install the high friction composite
kingpin bearing only kit 2520212C91. If
the service kit is not available, the
steering stabilizer H60961167 can be
installed in its place per the below
resolution. Proceed to step 11
Step Action Decision
11
DIAGNOSTIC: Once the high friction composite bearing is installed reevaluate
for a shimmy/wobble
Is the shimmy/wobble still present with the high friction bearing installed?
Yes: Install the steering stabilizer H60961167 per the resolution below.
No: Repairs are completed
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 6 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
RESOLUTION
Steering Stabilizer Installation Procedure:
Only if directed, install the steering stabilizer per the below procedure.
Park vehicle on a hard, flat surface, turn the engine off, set the parking brake, and block the wheels to prevent the vehicle from moving in either direction. Failure to do so may result in property damage, personal injury, and / or death.
If the vehicle must be raised, do not work under the vehicle supported only by
jacks. Jacks can slip or fall over, potentially resulting in property damage, personal injury, and / or death.
Always wear safe eye protection when performing vehicle maintenance. Failure to do so may result in personal injury and / or death.
The steering stabilizer kit is designed to fit 1.75inch tie rod tubes. If the tie rod tube is 1.9 inches you will need
to source 2 inch u-bolts locally for the kit and modify the tie rod tube mounting bracket accordingly.
Some Meritor and Dana axle configurations may require the mounting bracket (axle side) to be modified to bend slightly upward to clear the tie rod at full turn, and a longer axle U bolt installed (12 inch obtain locally). 1. Bring vehicle into the shop and park on flat hard surface. 2. Shift transmission to Park or Neutral, set parking brake, and install wheel chocks. 3. Remove the front U-bolt from the passenger side steer spring and discard. 4. On the tie rod assembly, measure the distance between the right and left grease zerks. 5. Divide your measurement from step 4 by two. (This will help locate the centerline of the tie rod assembly)
6. Mark the centerline of the tie rod assembly per figure 1 & 2.
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 7 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Figure 1: Tie rod assembly
Item 1: Tie rod assembly centerline
Figure 2: Steering Stabilizer to Axle Center Line
7. From the tire rod assembly centerline, make a second mark 5 7/8in towards the driver’s side per figure 3. This will be the mounting location of the
tie rod mounting plate.
Figure 3: Tie rod assembly
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 8 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Item 1: Tie rod assembly centerline (first mark)
Item 2: 5 7/8 from tie rod assembly centerline (second mark)
8. Follow the supplier instructions to attach the hardware for the stabilizer. Hendrickson steering stabilizer assembly instructions 59310-053.
When installing the U-bolts on the tie rod tube do NOT use an impact, or damage to the tie rob tube is possible. 9. Ensure proper clearance between the tie rod tube and the shock mount at the U-bolt per figure 4. If required modify the mounting bracket to
provide the needed clearance. 10. Before returning the truck to service, the steering system MUST be tested through its full range of travel. Any binding or contact at any point must be repaired before releasing the vehicle.
The Steering system must be inspected and tested for full range of travel to confirm there
is no binding or contact after the stabilizer has been installed. Any binding or contact at any point in the full range of travel must be repaired.
Figure 4: Tie rod tube to mount clearance
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 9 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Hide Details Feedback Information Viewed: 13656 Helpful: 448
Figure 5: Assembled Steering Stabilizer WARRANTY INFORMATION
Warranty Claim Coding: Refer to the Warranty Coding Manual for Group and Noun Codes. Standard Repair Time(s): Refer to the SRT Manual for Repair Times OTHER RESOURCES
Master Service Information Site Hendrickson Steering Stabilizer Assembly Instructions 59310-053
Hendrickson Softek, Steertek, Airtek Service Manual 17730-252
Hendrickson Kingpin Bushing Service 59310-011
Hendrickson Parts Catalog SP-182
TRW Service Literature Meritor Technical Bulletin TP-1873
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 10 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
Not Helpful: 426 Staff
ID
Client
ID
Comments Created Date DY12221 You received the following feedback From: dy12221 – Lukas Wood Email Address: lukaswood@nelsonleasing.com Job Classification: SE008, Service Technician Dealer: NELSON LEASING INC Feedback: link ik1700017 brings you to an empty article
6/24/2019
2:46:55 PM
DYYBXM6 You received the following feedback From: dyybxm6 Boyd Melko Email Address: bmelko@maximinc.com Job Classification: SE006, Service Foreman Dealer: MAXIM TRANS SERVICES, IN Feedback: The link to IK1700017 takes you to a matured document page even though Ik1700017 is still accessible from the Iknow
search page. 6/25/2019
11:33:26 AM
DY39402 You received the following feedback From: dy39402 – Byron Holmes Email Address: holmesb1@rushenterprises.com Job Classification: SE008, Service Technician Dealer: RUSH TRK CTR OF IL Feedback: IK1700017 displays “Matured Document” 6/27/2019
8:21:25 AM
Copyright © 2019 Navistar, Inc.
IK0500038 – Steering Shake, Shimmy, Shudder, Steering Vibration Page 11 of 11
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID… 7/1/2019
IK0500038
6/10/2019
https://www.nhtsa.gov/recalls?nhtsaId=10162031
https://static.nhtsa.gov/odi/tsbs/2019/MC-10162031-0001.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- UNIVERSAL REMOVAL TOOLS: This 3 jaw puller set by Orion Motor Tech fits your wrench or ratchet to work as a gear puller, bearing puller, crank pulley puller, flywheel puller and more, letting you easily handle worn or broken parts
- BETTER TOGETHER: Our bearing puller set includes four puller sizes, offering maximum spreads of 3", 4", 6", and 8" and reaches of 4.3", 5", 7.3", and 9.2" to cover most applications
- 3 JAW DESIGN: These power steering pulley pullers bite tightly onto your components with their reinforced jaws and distribute even pulling force to remove parts without causing damage
- REVERSIBLE JAWS: Each pulley removal tool can be reversed to pull parts from either the inside or outside, with the 6" and 8" gear puller provide 4 configurations for a sure grip thanks to their dual fixing holes
- TOOLS FOR MECHANICS: Drop-forged and heat-treated carbon steel builds with corrosion proof coatings ensure these pullers last for resilient service with unrivaled strength and durability
- This Puller designed for professionally dual-purpose use
- Easy and safely to remove the stuck on the rear wiper arm
- Use to remove battery terminal clamp without damage to cause battery post
- Jaw opening: 1/16" - 1-1/16" (6-28mm); Outer diameter:1-7/8" (48mm)
- Tighten knurled cone to force jaws under the cable clamp. Also removes bolted on windshield wiper arms that fit over a tapered spline
- 🚖MULTIFUNCTION - Allowing unit to be used with harmonic balancer, flywheel, crankshaft, steering wheel, pulley and other two or three hole applications.
- 🚖HIGH-QUALITY - All components are crafted from heat treated carbon steel with oxide finishes, helping the tool withstand tough pulling jobs and resist rust.
- 🚖COMPATILIBIYTY - Includes 30 different bolts and a four-yoke slot, can handle a range of jobs on most cars, trucks, SUVs and small engine vehicles.
- 🚖PACKAGE - Comes with a heavy duty blow molded carrying case, for easy transportation, safe storage and quick organization.
- 🚖100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
- EFFICIENT TIMING GEAR REMOVAL: The Performance Tool W87010 Timing Gear Puller helps you remove timing gears and other gears with tapped holes easily and efficiently.
- CORROSION-RESISTANT: The drop-forged yoke is plated to resist corrosion and maintain durability even with regular use.
- HEAT-TREATED CENTER SCREW: The heat-treated center screw ensures that the puller can handle tough and heavy-duty jobs with ease.
- TWO BOLTS INCLUDED: The kit includes two 5/16-Inch x 4-Inch bolts, so you don't need to worry about purchasing additional hardware.
- ADJUSTABLE PULLER SPREAD: The puller has an adjustable spread of 1-1/2 to 4-1/4-Inches, making it suitable for a range of applications.
- 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- This 2 jaw gear puller is made with premium heat-treated CR-V steel to ensure no breakages or bend occur from the high tension experienced during pulling.
- 2 jaw gear puller can be reversed to pull parts from either the inside or outside. The jaws allows for easy gripping and access to tight spaces.
- The button makes it easily to change the puller into internal or external gear puller.
- There are 5 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 3", 4", 6", 8", 10"
- 2 Jaw Bearing Puller - Perfect for removing small bearings and other fasteners with ease.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Small Bearing Puller - Ideal for removing miniature bearings and other small fasteners on delicate equipment.
- Multi-purpose Reversible Jaw Puller - The two arms of the puller can be mounted with the claws facing inside or facing outside, suit for internal and external pulling of bearings and other components.
- Mark 4"-100mm size - The screw length of the two jaws puller is 4.52inches/115mm,Bracket Length:4 inches/ 100mm(Due to the anti-falling pin, the actual bracket is only 90mm/3.54 inches for use ),Screw Diameter (top): 12mm,Screw Diameter (bottom): 10mm,Claw Length:4inches/100mm(The actual length of the claw installed on the bracket: 67mm /2.63"), For more size description please see size picture.
- The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.
- High quality material - The 2 jaw bearing puller is made of forged chrome vanadium steel material. It has high hardness and strength. Heat treatment process makes it more durable.TAO+stores offer 4 different sizes of jaw puller for you to choose to deal with different parts (small, medium and large): 4 inches, 6 inches, 8 inches, 10 inches, please choose the appropriate model when purchasing.
- Adjustable Design - The 2 jaw gear puller can adjust the clamping depth and working space, suitable for gears and bearings of different sizes,design makes it easy to grasp the gears and bearings and pull them out.
- Specification - The screw length of the two jaws puller is 6.5 inches/165mm,Bracket Length:6 inches/ 150mm(The top end of the bracket 2 has anti-dropout pins, and the 2-Jaw Gear Puller actually uses a gear maximum of 5.3 inches),Screw Diameter (top): 14mm,Screw Diameter (bottom): 14mm,Total length of claw:5.6inches/140mm(The actual length used after installing the bracket on the claw is 3.8 inches/97mm),Claw Thickness:5mm, For more size description please see size picture and video.
- Wide application - The two jaws bearing remover is widely used in various bearings that are not easy to disassemble. 2-jaw separator tool for removal of stuck or small tolerance pulleys, gears, bearings and more without damage them.
- High quality after-sales service - Customers’ feedback always matters. The goal of our MANNIFEN brand is to make you satisfied with buying. If you’re not 100% content with our 6 inch two claws gear puller, please feel free to contact us. We'll try our best to provide you with a satisfactory solution.
- √ High Quality - The 2 jaw bearing puller is made of high-strength and heat-treated chrome-vanadium steel, and the heavy-duty structure has strength and durability well as rust and corrosion resistance.
- √ Adjustable - 2 jaw bearing Remover can adjust the clamping depth. Adjustable Diameter 30-80mm. have Reversible claw legs make it suitable for use as an internal or external bearing puller. The reasonable design of the claw will not fall off when force is applied.
- √ Easy to Use - Use the two jaws to catch the bearing; Rotate the mandrel with the thread; Slowly pull out the bearing of the shaft.
- √ Get into Tight Hard-To-Reach Spots- This 2 Jaw Puller Tool can remove bearing or gears, pulleys and flywheels off a shaft in hard-to-reach spots without damage your application.
- √ Widely Use - This 2 jaw Bearing Puller Widely use in various bearings that are not easy to disassemble. Can also be used for automotive flywheel, motorcycle wheel,scooter motorcycle bearing and gear and so on.
- ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
- HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
- PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
- ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
- Heat treated center screw
- Chrome vanadium jaws
- Drop forged for strength
- Chrome plated finish
- DURABLE CONSTRUCTION: MIG welding; Industrial grade air hose with standard tire air chuck
Last update on 2024-03-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.