“This site contains affiliate links for which OEMDTC may be compensated” |
June 21, 2019 NHTSA CAMPAIGN NUMBER: 19V487000
Improperly Crimped Brake Wire Terminals
If the trailer brakes do not apply as expected, the distance required to stop the trailer may be lengthened, increasing the risk of crash.
NHTSA Campaign Number: 19V487
Manufacturer Charles Machine Works Inc
Components SERVICE BRAKES, ELECTRIC
Potential Number of Units Affected 796
Summary
Charles Machine Works Inc. (Charles Machine) is recalling certain 2018-2019 Ditch Witch VT9, VT12, VT14, VT17, VT20 and VT24 trailers. The brake wire terminals may have been improperly crimped, which can result in the trailer brakes failing to apply when commanded.
Remedy
Charles Machine has notified owners, and dealers will replace the brake terminals with a machine terminal, free of charge. The recall began June 25, 2019. Owners may contact Charles Machine customer service at 1-800-654-6481.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
ID0568815 – 1
VT Trailer Terminal Kit
INSTALLATION INSTRUCTIONS
VT Trailer Terminal Kit HX30, HX50, HX75 on VT trailers | |
Kit Number: 190-2482 | Estimated Installation Time: 2 hours |
Before You Start
Read instructions thoroughly. Check to see if all parts in bill of materials are in kit. If parts are missing or do not match bill of materials, contact your Ditch Witch® dealer.
Purpose
This document provides the instructions for replacing the terminals on VT trailers carrying HX machines. This instruction requires using a universal hand crimp tool (p/n 259-511, shown).
To set the tool, adjust the dial (on other side of tool) to match wire size. Place terminal in tool and adjust crimp location at knob (turn adjuster above green part of tool).
ID0568815 – 2
VT Trailer Terminal Kit
Bill of Materials
Description | Qty. | P/N |
Term Deutsch 12S 0462-203-12141 | 10 | 215-3197 |
IMPORTANT: Verify that no insulation will be inside new terminals (2153197). |
Instructions
- Lift all four wheels off ground and secure trailer with stands or other means.
- Remove wheel and rim.
- Disconnect harness (shown).
- Pull plug and remove connector.
- Cut off both terminals.
- Strip wire ends (one is shown).
- Put long end of terminal in tool.
- Push wire in until it bottoms out and crimp.
- Repeat for other terminal.
- Reassemble connector.
- Plug connector into harness.
- Install wheel and rim.
- Repeat process on other three wheels.
Description | P/N |
Term Deutsch 12S 0462-203-12141 | 215-3197 |
Publication Number: ID0568814
Publication Date: June 2019
Safety Notice
Affected Models | VT9, VT12, VT14, VT17, VT20 & VT24 trailers (carrying HX30, HX50, HX75 machines) |
Attention | Dealership Owners, Managers, Parts and Service Managers |
What Dealer Should Do |
|
Parts Required | VT trailer terminal kit (190-2482) installation also requires universal hand crimp tool (p/n 259-511) |
Estimated Repair Time | 2 hours |
Compensation | parts, labor and mileage |
Dealership Notes | URGENT: Please perform this update as soon as possible in the interest of safety. Ditch Witch requests that you update all machines in your area by 12/31/2020.
A notification has been mailed to owners of affected models. Please note “What You Should Do” section of the attached customer notice. If you have any questions, contact the Trenchless Product Support Group. |
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
CHARLES MACHINE | DITCH WITCH | 2018-2019 |
9 Associated Documents
Recall Quarterly Report #1, 2019-2
RCLQRT-19V487-8737.PDF 211.133KB
Recall Quarterly Report #3, 2019-4
RCLQRT-19V487-2714.PDF 211.318KB
Recall Quarterly Report #2, 2019-3
RCLQRT-19V487-3485.PDF 211.231KB
Remedy Instructions and TSB
RCRIT-19V487-5666.pdf 139.025KB
Defect Notice 573 Report
RCLRPT-19V487-2872.PDF 214.752KB
Manufacturer Notices(to Dealers,etc)
Recall Acknowledgement
RCAK-19V487-8216.pdf 245.292KB
Recall Quarterly Report #5, 2020-2
RCLQRT-19V487-3703.PDF 211.533KB
Recall Quarterly Report #4, 2020-1
RCLQRT-19V487-2928.PDF 211.533KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V487&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- ❣【Professional Crimping Tool】- This crimping tool works best with Heat Shrink Connectors (AWG22-10). Plustool hand crimper has efficient ratcheting mechanism and professional grade crimping die for proper rock-solid crimps every time. Colored crimping die nests for quick identification. Besides, crimping plier will not damage the heat shrink insulation.
- ❣【Precision Ratcheting Structure】- Wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The tool will self open when the required amount of crimping force has been applied, ensured uniform crimps everytime. The built-in quick release lever allows to open the crimper jaws in any position.
- ❣【Ergonomic Handle Design】- Plustool crimper tool is designed for ergonomic cushioned handle that provides maximum comfort and reduced hand fatigue. Non-slip design ensures strong grips in any condition and provides maximum leverage, increasing comfort and making the grip self adjusting.
- ❣【Adjustable Compression Wheel】- A good product depends on exquisite workmanship! Plustool crimping tool features a star wheel, which allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system helps to a easier operation.
- ❣【Quality Commitment】 - Plustool products are backed by reliability and consistency, coming with quality assurance you can trust. For any reason you're not satisfied with this deal, you're covered by our 60 day NO-QUESTION-ASKED MONEY BACK.
- Crimps insulated terminals onto 10-22 AWG stranded copper wire
- Adjustable compound action design puts more crimping power into each squeeze
- Three crimping cavities in one tool: 22–16 AWG (Red), 16–14 AWG (Blue) and 12–10 AWG (Yellow) terminals
- Built-in ratchet ensures full-cycle crimping for a uniform crimp every time
- Unique cavity design provides consistent crimp from either side of the tool
- PROFESSIONAL CRIMPING TOOL - this hand crimper has efficient ratcheting mechanism and professional grade crimping die for proper rock-solid crimps every time. This crimping tool works best with insulated nylon electrical terminals
- PRECISE RATCHETING MECHANISM – wire connectors are crimped by squeezing the handle through a complete ratcheting cycle until the handle releases automatically. The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp
- ADJUSTABLE CRIMPING FORCE - The tool has a star wheel that allows to adjust crimping height to ensure the right amount of crimping force depending on your crimping project. A designated quick release lever allows to open the crimper jaws in any position
- ERGONOMIC COMFORTABLE HANDLES - The ergonomic, cushioned, non-slippery handles were designed to ensure strong grips in any condition. These handles have enough leverage to comfortably crimp AWG 22-10 splices
- LIFETIME WARRANTY - Wirefy stands behind the quality of our products. We offer lifetime warranty for our crimping tools. If you have any issues during the lifetime of your crimper, just let us know. Our customer experience team is always here to help
- CRIMPS 22-10 AWG non-insulated terminals
- 8 in. high leverage design and a NON-SLIP COMFORT GRIP HANDLE
- EASILY CUT copper and aluminum wire
- TAPERED NOSE for cutting in tight locations
- Made with DROP FORGED STEEL for longevity and durability
- Crimper crimps 10 to 22 AWG insulated and non-insulated terminals
- Cutting and Crimping Tool has specially hardened wire cutter in nose
- Tapered nose design for working in confined spaces
- Crimping die marked for insulated and non-insulated solderless terminals and connectors
- Made in USA
- [VERSATILE]: Strips and removes insulation. Crimp insulated and bare wires. gripping nose works to pull, hold, twist, and bend wire ends.
- [COMPACT]: Thin cable cutter design combines 4 separate functions into one compact 7” tool, ideal for common wire connectors and repairs.
- [DURABLE]: Solid forged alloy steel construction with a protective black finish stands up to extensive everyday carry and daily use.
- [PRECISE]: Blades and teeth are heat treated CNC machined for precision accurate, and clean smooth cuts on copper, aluminum, cables, automotive wires, and soft steel wires.
- [SIZES]: Cut, grip, twist, pull, crimp, and strip wires and cables in gauges from 12, 14, 16, 18 & 20 AWG in one small handheld tool.
- This wire crimper tool works best with heat shrink connectors.this hand crimper has efficient ratcheting mechanism and High-precision jaw which is color coded. Crimping is accurate and never damage the terminal,crimping is in one step.
- Ergonomic handle provides maximum comfort and reduced hand fatigue.Non-slip design to ensure strong grips in any condition,provides maximum leverage and increased comfort making the grip self adjusting.
- This wire crimper is made of premium industrial grade high strength carbon steel which is treated with black oxidation,rust and corrosion resistance.Qibaok professional insulated wire terminals connectors ratcheting crimper tool is designed for 22-10AWG.
- This terminal crimper has a star wheel that you can adjust the handle crimp strength by adjusting the roulette to ensure uniform crimping each time.Heavy Duty Full-Cycle ratcheting terminal crimper with labor saving system help to a easier operation.The ratcheting function allows to secure a wire connector while you can insert the wires into the crimp.
- Wire Crimper can be used for home appliance repair, home circuit repair, vehicle circuit connection, and everything about circuit connection.
- ✅ 8 inch Professional Wire Stripper: Cuts, strips wire and loops 10-22 AWG Solid copper wire or aluminum cables.high carbon alloy steel with accurate stripping.
- ✅ Easy To Use: Strong-gripping serrated nose for easy bending, shaping, and pulling of wire
- ✅ Designed Grip Handle:Cutting action combined with ergonomic curved handle, designed non-slip rubber handle, which enables firm grip and eliminates hand fatigue
- ✅ ALL-IN-ONE: it's could be applied to crimping both insulated and non-insulated terminals
- ✅ 24 Month Warranty: Quality assurance. 24 Month warranty and 24/7 hours WGGE customer service
- Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.45 Inch
- Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope
- 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working
- 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip
- 【Easy operation】The mold can be easily replaced by one-way fixed latch
- 【Versatilel】For AWG 8,6,4,2,1,1/0 battery cable lugs, compatiable with copper&aluminum cable lug,non-welding and standard electrical connection.
- 【Product upgrade】It will bring embossing AWG value to the cable lugs after crimping for a visual checking. Facilitates the selection of the correct parts for later repairs.
- 【Precise dies】Hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies. Ensure solid compressions.
- 【Comfortable operation】Comfortable grip with antislip surface saves strength and improves user's experience for easy handling and control.
- 【Solid construction】Made of high quality carbon steel which can offer long service life. Ensure solid compressions.
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.