Boom Support Plate May Obscure Visibility – 2015-2019 Caterpillar Progress Rail 75HRT SkyTrim Hi-Rail

“This site contains affiliate links for which OEMDTC may be compensated”

June 14, 2019 NHTSA CAMPAIGN NUMBER: 19V462000

Boom Support Plate May Obscure Visibility

The lack of visibility may increase the risk of crash. The detachment of the boom and cradle may become a road hazard, increasing the risk of crash.

 

NHTSA Campaign Number: 19V462

Manufacturer Caterpillar Inc.

Components UNKNOWN OR OTHER

Potential Number of Units Affected 6

 

Summary

Caterpillar Inc. (Caterpillar) is recalling certain 2015-2019 Progress Rail 75HRT SkyTrim Hi-Rail vehicles. The boom cradle includes a support plate that may block the driver’s visibility. Additionally, the slew may be insufficient, which may result in the detachment of the boom from the cradle while the vehicle is in motion.

 

Remedy

Caterpillar will notify owners, and Progress Rail dealers will relocate the boom cradle to provide visibility for the driver, and revise the boom hydraulic circuit to prevent an inadvertent boom in the event of a hose failure or leak. These repairs will be performed free of charge. The recall began August 12, 2019. Owners may contact Caterpillar customer service at 1-800-447-4986.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


August 2, 2019

 

IMPORTANT SAFETY RECALL

THIS NOTICE APPLIES TO THE FOLLOWING VEHICLE(S)

 

SERIAL/PIN / VIN # 5KKHAV  

(Example VIN shown)  

 

SAFETY – RECALL – Defect in Boom Cradle and Slew, NHTSA Recall #19V-462

MODELS INVOLVED – 75HRT SkyTrim Hi-Rail Mobile Units

 

Dear SkyTrim Owner:

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Progress Rail has determined that defects which relate to motor vehicle safety exist on the 75HRT SkyTrim Hi-Rail Mobile Units with certain hydraulic and construction features.

The SkyTrim units affected were manufactured between August 2015 – April 2019. In the event of a hydraulic system failure (such as a hose burst), certain SkyTrim 75HRT hydraulic circuits that control the swing of the upper boom structure could allow the boom to drift and potentially swing into motor vehicle traffic. A hydraulic system holding valve must be relocated to prevent this possibility.

The SkyTrim units produced between August 2015 – April 2019 may also have an upper platform that is located directly above the operator’s cab that contains a boom rest mount which can interfere with the operator’s ability to see the end of the saw head assembly. Failure to see the end of the saw head assembly could result in the operator infringing upon or contacting other structures or vehicles that are not in the line of sight.

Components necessary for the remedy are available at this time. Progress Rail Services will contact you via telephone to schedule a service visit and will perform this service to correct the hydraulic valve relocation and modification to the SkyTrim 75HRT unit(s) at your business location free of charge.  Alternatively, you may contact Progress Rail Services at your earliest convenience to arrange for the repair of the SkyTrim 75HRT unit(s).

Until Progress Rail is able to complete the necessary service, we recommend that SkyTrim operators: (1) increase their following distance while in traffic due to limited visibility to the end of boom; (2) take note and remain vigilant regarding overhead clearance needs due to the limited visibility to end of the boom; and (3) perform a walk-around visual inspection of the boom prior to beginning movement via a road or highway to ensure hydraulic hoses to the boom are leak free and intact.

You received this notification because government regulations require that notification be sent to the last known owner of record.  If you are a lessor of these vehicles, you must forward this letter to your lessee within ten days.

If you no longer own the vehicle, please contact Progress Rail at (334) 387-9307.

If you have any questions about this recall or which vehicle(s) may be affected, please contact:

Progress Rail Services Corp.
10650 Highway 80 East, Montgomery, AL 36117
Attn:  Robin Intagliata
Telephone: (334) 387-9307

 

If you believe that Progress Rail has failed or is unable to remedy the defect in your vehicle, without charge, within a reasonable period of time, you may submit a complaint to the Adminstrator at:

In the U.S.
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, S.E.
Washington, D.C. 20590
Telephone: 1-888-327-4236 (TTY:1-800-424-9153) or go to
https://www.safercar.gov

 

We regret the inconvenience this may cause you, but urge you to have this service performed for your safety and satisfaction as soon as possible.

 


5 Affected Products

Vehicle

MAKE MODEL YEAR
PROGRESSIVE RAIL SERVICES SKY TRIM 2015-2019

 


6 Associated Documents

Recall 573 Report- Amendment 2

RCLRPT-19V462-3280.PDF 216.049KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.99 KB]

 


Recall Acknowledgement

RCAK-19V462-1293.pdf 245.381KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.63 KB]

 


Defect Notice 573 Report

RCLRPT-19V462-1007.PDF 214.21KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.19 KB]

 


Recall Quarterly Report #1, 2019-3

RCLQRT-19V462-6471.PDF 211.118KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Owner Notification Letter(Part 577)

RCONL-19V462-3531.pdf 535.449KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [522.90 KB]

 


Recall 573 Report- Amendment 1

RCLRPT-19V462-7388.PDF 214.143KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.12 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V462&docType=RCL

 


 

SaleBestseller No. 1
Starfire Premium Lubricants AW 32 Hydraulic Oil, 5 Gallon, Pail
  • Formulated with premium base stocks for added resistance to thermal breakdown
  • Outstanding wear protection
  • Excellent resistance to system rust and oil oxidation
  • Maintains excellent water separating properties
  • Excellent foam control and air release deliver consistent system operation
Bestseller No. 2
Star Fire Premium Lubricants AW 46 Hydraulic Oil, 5 Gallon, Pail
  • Formulated with premium base stocks for added resistance to thermal breakdown
  • Outstanding wear protection
  • Excellent resistance to system rust and oil oxidation
  • Maintains excellent water separating properties
  • Excellent foam control and air release deliver consistent system operation
Bestseller No. 4
Johnsen's 5594 Hydraulic Jack Oil - 32 oz.
  • Hydraulic Jack Oil
  • Formulated to perform at a wide range of temperatures
  • Contains anti-foam additives and rust inhibitors
  • Reduces friction
  • It is mixable with other standard hydraulic jack oils
Bestseller No. 5
Ultra1Plus U1P-Duty ISO 68 AW Hydraulic Fluid
  • SUPERIOR WEAR PROTECTION: U1P ISO AW 68 Hydraulic Oil minimizes friction and wear for extended equipment life.
  • VERSATILE PERFORMANCE: Suitable for high-pressure industrial applications, this fluid remains stable across wide temperature ranges, safeguarding critical components and seals.
  • ADVANCED RUST & CORROSION PREVENTION: Protects hydraulic systems from rust and corrosion for optimal operation.
  • OUTSTANDING DEMULSIFICATION: Separates water for cleaner oil and improved system life.
  • EXCELLENT FILTERABILITY: Maintains performance at high temperatures and prevents filter clogs.
Bestseller No. 7
Lucas Oil 10018 Hydraulic Oil Booster and Stop Leak - 1 Gallon, Brown
  • Reduces the operating temperature of hydraulic systems
  • Conditions old seals and O-rings to stop and prevent future leaks
  • Well suited for use in equipment with wet brakes
  • Removes varnish and restores pressure for more efficient operation
  • Compatible with both synthetic and conventional hydraulic fluids
Bestseller No. 8
MAG 1 AW32 10-Weight Hydraulic Fluid - 1 Gallon
  • MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.
Bestseller No. 9
Starfire Premium Tractor Hydraulic & Transmission Fluid (J20C Equivalent)
  • Formulated with highly refined group ii base stocks for added resistance to thermal breakdown
  • Superior wear protection to protect critical components
  • Excellent frictional properties for smooth-shifting, excellent anti-shudder performance
  • J20c equivalent, protection against varnish and sludge formation
  • Superior thermal stability and oxidation resistance, good seal compatibility
SaleBestseller No. 10
Starfire Premium Lubricants Aw 68 Hydraulic Oil, 5 Gallon, Pail
  • Formulated with premium base stocks for added resistance to thermal breakdown
  • Outstanding wear protection
  • Excellent resistance to system rust and oil oxidation
  • Maintains excellent water separating properties
  • Excellent foam control and air release deliver consistent system operation

Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...