“This site contains affiliate links for which OEMDTC may be compensated” |
June 11, 2019 NHTSA CAMPAIGN NUMBER: 19V442000
Missing Lamps and Reflective Tape
Due to the lack of lamps and insufficient reflective tape, the trailer may not be visible at night, increasing the risk of crash.
NHTSA Campaign Number: 19V442
Manufacturer Vac-Tron Equipment, LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 208
Summary
Vac-Tron Equipment, LLC. (Vac-Tron) is recalling certain 2015-2019 LP873SDT Heavy, Vacuum Excavator-dual axle trailers. The trailer may lack front and rear lights, including clearance lamps, reflex reflectors, and side reflex reflectors. The trailers may also may have an insufficient amount of reflective tape on the sides and rear. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Vac-Tron will notify owners and dealers will move the marker lights to the compliant position, and install lower chassis extension, conspicuity tape, and reflectors, free of charge. The recall began August 1, 2019. Owners may contact Vac-Tron customer service at 1-888-822-8766.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
NHTSA is missing critical, required information for this safety recall. This information must be supplied through the NHTSA Recalls Portal within 5 working days of confirming its accuracy:
– A description of how the products to be recalled differ from similar products that are not included in the recall (49 CFR 573.6 (c)(2)).
– A statement that the defect or noncompliance can cause a vehicle crash. (49 CFR 577.5 (f)(1)).
– A description of the manufacturer’s program for remedying the defect or noncompliance (49 CFR 573.6 (c)(8)(i)).
– Your company’s program shall include a plan for reimbursing an owner or purchaser who incurred costs to obtain a remedy for the problem addressed by the recall within a reasonable time in advance of your company’s notification of owners, purchasers and dealers, in accordance with § 573.13 of this part. Your company’s plan may incorporate by reference a general reimbursement plan it previously submitted to NHTSA, together with information specific to the individual recall. Information required by § 573.13 that is not in a general reimbursement plan shall be submitted in your company’s report to NHTSA under this section. If your company submits one or more general reimbursement plans, your company shall update each plan every two years, in accordance with § 573.13. Your company’s remedy program and reimbursement plans will be available for inspection by the public at NHTSA headquarters (49 CFR 573.6 (c)(8)(i)). If the vehicles are new and would be covered under the manufacturer’s warranty program, please state that in the remedy section of your filing.
NHTSA SAFETY RECALL NUMBER 19V-442
IMPORTANT SAFETY RECALL
First Notice Safety Enhancement Kit (VVK00-0001) |
Model: «Model»
This notice applies to your vehicle, Serial No: «VIN» |
August 8, 2019
VIA USPS CERTIFIED/REGISTERED MAIL
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle Safety Act.
VacTron Equipment LLC has decided that a defect, that relates to motor vehicle safety, exists in certain model year 2015-2019 VacTron LP873SDT/LPSDT Heavy.
ON-HIGHWAY SAFETY COMPONENT ENHANCEMENTS
As you know, Vermeer recently acquired Vac-Tron Equipment, LLC. As part of the acquisition, Vermeer assisted Vac-Tron in reevaluating the design of Model LP873SDT/LPSDT heavy vacuum excavator. The design reevaluation identified required upgrades to the on-highway safety components, including adding or changing marker lights, reflectors, conspicuity tape and adding an extension to the rear of the chassis. These upgrades are required by Federal Motor Vehicle Safety Standard (FMVSS) governmental regulation 108 and 224 for the United States, Canada and Mexico.
DEATH OR SERIOUS INJURY POSSIBLE
When towing the vacuum excavator on public roadways, death or serious injury may result:
- If another vehicle strikes the rear of the vacuum excavator causing the other vehicle to travel under the rear of the vacuum excavator. To reduce the potential of this occurring, a rear chassis extension is being added.
- If driver(s) of other vehicle(s) do not see the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, additional marking lights, reflectors and conspicuity tape are being added.
Property or equipment damage may also occur.
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VVK00-0001 has been created to provide the necessary parts and instructions to install marker lights, reflectors, conspicuity tape and a lower chassis extension on the rear of the machine. This kit must be installed as soon as possible.
As stated above a new rear extension will be added to the vacuum excavators. Care has been given in the design of this new trailer extension to ensure that it does not interfere with the operation of the opening the door before dumping. Below is an excerpt from the vacuum excavator’s Operator’s Manual which provides steps for proper operation. When discussing this upgrade with your customer, please ensure that they understand the proper operation, so the door does not strike the trailer extension.
Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually acceptable time and location to install VVK00-0001 at no cost to you for labor or materials. The installation of this kit is estimated at 4 hours of labor. If the Vermeer dealer travels to the unit to install the kit, costs may be incurred by the owner. You must have your machine upgraded for these safety features.
Contact your local Vermeer Dealer:
«Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«Serv_Dealer_Country»
Telephone:
«Serv_Dealer_Phone»
According to our records, you currently own a VacTron LP873SDT/LPSDT heavy vacuum excavator. The Model and Serial Number of the LP873SDT/LPSDT heavy is shown at the top right of this letter. If you no longer own this unit, please notify VacTron by notifying Vermeer Corporation’s Product Safety Department at:
Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner.
We regret any inconvenience that these corrective measures may cause you. The required work is for the safety of the towing vehicle driver and occupants as well as others traveling on public roadways or in the immediate area while being towed. We hope that you agree that the safety benefits surpass the inconvenience.
Very truly yours,
VACTRON EQUIPMENT LLC
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable time, contact VacTron through Vermeer Product Safety by email at productsafety@vermeer.com or by calling 800-829-0051 or 641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov
SEOCONTENT-START
104″
” 14
271
3514
”
Front Side Marker
Lamp (area 4a)
Front Side Reflex
Reflector (area 4b)
Rear Side Reflex
Reflector (area 3)
Rear Side Marker
Lamp (area 3)
Front Clearance
Lamp (area 8)
Side Marking
(area 12)
Side Marking
(area 12)
DrawnBy
FRACTIONAL
06/27/19
LP 800 SDT HVY
Greg Miller
As Specified
LP0873-49DT-X5 As Specified
UNLESS OTHERWISE SPECIFIED:
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
VendorNo
SHEET 1 OF 4
REV
7
VAC-TRON EQUIPMENT LLC
6 5
THE INFORMATION CONTAINED IN THIS Stock Size
Material
.01
NAME
CheckedBy
DATE
8 3
DO NOT SCALE DRAWING
SIZE
2
TITLE:
TWO PLACE DECIMAL
COMMENTS:
4
WITHOUT THE WRITTEN PERMISSION OF
THREE PLACE DECIMAL
REPRODUCTION IN PART OR AS A WHOLE
VAC-TRON EQUIPMENT LLC. ANY
.002
Description
PROHIBITED.
.01
PROPRIETARY AND CONFIDENTIAL
ANGULAR: MACH
DWG. NO.
1/32″ B
1
DRAWING IS THE SOLE PROPERTY OF
VAC-TRON EQUIPMENT LLC IS STRICTLY
DIMENSIONS ARE IN INCHES
TOLERANCES:
LP 800 SDT HVY
REVISIONS
REV. DESCRIPTION DATE APPROVED
0 Initial Release 7/15/2019 GSM
Rear Side Reflex
Reflector (area 3)
Front Side Marker
Lamp (area 4a)
Rear Side Marker
Lamp (area 3)
Front Clearance
Lamp (area 8)
Front Side Reflex
Reflector (area 4b)
104″ 3514
”
Side Marking
(area 12)
Side Marking
(area 12)
VAC-TRON EQUIPMENT LLC IS STRICTLY
06/27/19
UNLESS OTHERWISE SPECIFIED:
As Specified
LP 800 SDT HVY
As Specified
Greg Miller
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7
DO NOT SCALE DRAWING
SHEET 2 OF 4
DrawnBy
REV
LP0873-49DT-X5
DWG. NO.
4
COMMENTS:
3
DATE
DRAWING IS THE SOLE PROPERTY OF SIZE
NAME
TITLE:
5
VAC-TRON EQUIPMENT LLC
6 1
VendorNo
PROPRIETARY AND CONFIDENTIAL
2
B Material
WITHOUT THE WRITTEN PERMISSION OF
REPRODUCTION IN PART OR AS A WHOLE
PROHIBITED.
THE INFORMATION CONTAINED IN THIS
VAC-TRON EQUIPMENT LLC. ANY
.002
Description
CheckedBy
DIMENSIONS ARE IN INCHES Stock Size
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL
LP 800 SDT HVY
Front Clearance
Lamp (area 8)
Rear Clearance
L:amp (area 6)
Rear Reflex
Reflector (area 1)
Rear Lower Body
Marking (area 11)
Rear Upper Body
Marking (area 9)
Rear Upper Body
Marking (area 9)
Rear Identification
Lamps (area 7)
Rear Lower Body
Marking (area 11)
License Plate
Lamp (area 2)
Rear Tail/Stop/Turn Signal
Lamp (area 1)
VAC-TRON EQUIPMENT LLC IS STRICTLY
As Specified
REV
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7 6 5 4 3
As Specified
DrawnBy
UNLESS OTHERWISE SPECIFIED:
Greg Miller
LP 800 SDT HVY
VendorNo
1
WITHOUT THE WRITTEN PERMISSION OF
SIZE
PROPRIETARY AND CONFIDENTIAL
DWG. NO.
B
PROHIBITED.
DO NOT SCALE DRAWING
THE INFORMATION CONTAINED IN THIS
VAC-TRON EQUIPMENT LLC
2
DRAWING IS THE SOLE PROPERTY OF
SHEET 3 OF 4
LP0873-49DT-X5 REPRODUCTION IN PART OR AS A WHOLE
06/27/19
TITLE:
VAC-TRON EQUIPMENT LLC. ANY
.002
Description
CheckedBy
Stock Size
Material
COMMENTS: NAME DATE
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL
LP 800 SDT HVY
Frame Stiffener
Rear Chassis Extension
VendorNo
As Specified
Greg Miller
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7 6 5 4 3
As Specified
DO NOT SCALE DRAWING
LP0873-49DT-X5
06/27/19
REV
VAC-TRON EQUIPMENT LLC IS STRICTLY
1
WITHOUT THE WRITTEN PERMISSION OF
SIZE
PROPRIETARY AND CONFIDENTIAL
DWG. NO.
B
PROHIBITED.
UNLESS OTHERWISE SPECIFIED:
THE INFORMATION CONTAINED IN THIS
VAC-TRON EQUIPMENT LLC
2
DRAWING IS THE SOLE PROPERTY OF
SHEET 4 OF 4
LP 800 SDT HVY
REPRODUCTION IN PART OR AS A WHOLE
DrawnBy
TITLE:
VAC-TRON EQUIPMENT LLC. ANY
.002
Description
CheckedBy
Stock Size
Material
COMMENTS: NAME DATE
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL
LP 800 SDT HVY
REVISIONS
REV. DESCRIPTION DATE APPROVED
0 Initial Release 7/15/2019 GSM
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
VAC-TRON EQUIPMENT LLC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
VAC-TRON EQUIPMENT LLC IS STRICTLY
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .002
Description
CheckedBy
Stock Size
Material
COMMENTS: NAME DATE
VAC-TRON EQUIPMENT LLC
TITLE:
SIZEB
DWG. NO. REV
SHEET 1 OF 4
DO NOT SCALE DRAWING
VendorNo
06/27/19
LP 800 SDT HVY
Greg Miller
LP0873-49DT-X5
As Specified
DrawnBy
As Specified
UNLESS OTHERWISE SPECIFIED:
LP 800 SDT HVY
Rear Corner/Side
Clearance Marker Light
Front Side
Marker Light
Red/White
Conspicuity Tape
27114
”
Rear Corner/Side
Clearance Marker Light Front Side
Marker Light
Red/White
Conspicuity Tape
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
VAC-TRON EQUIPMENT LLC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
VAC-TRON EQUIPMENT LLC IS STRICTLY
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .002
Description
CheckedBy
Stock Size
Material
COMMENTS: NAME DATE
VAC-TRON EQUIPMENT LLC
TITLE:
SIZEB
DWG. NO. REV
SHEET 2 OF 4
DO NOT SCALE DRAWING
VendorNo
06/27/19
LP 800 SDT HVY
Greg Miller
LP0873-49DT-X5
As Specified
DrawnBy
As Specified
UNLESS OTHERWISE SPECIFIED:
LP 800 SDT HVY
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
VAC-TRON EQUIPMENT LLC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
VAC-TRON EQUIPMENT LLC IS STRICTLY
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .002
Description
CheckedBy
Stock Size
Material
COMMENTS: NAME DATE
VAC-TRON EQUIPMENT LLC
TITLE:
SIZEB
DWG. NO. REV
SHEET 3 OF 4
DO NOT SCALE DRAWING
VendorNo
06/27/19
LP 800 SDT HVY
Greg Miller
LP0873-49DT-X5
As Specified
DrawnBy
As Specified
UNLESS OTHERWISE SPECIFIED:
LP 800 SDT HVY
Rear Brake Light
Identification Lights
License Plate
Light
D
C
B
A A
B
C
D
8 7 6 5 4 3 2 1
8 7 6 5 4 3 2 1
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
VAC-TRON EQUIPMENT LLC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
VAC-TRON EQUIPMENT LLC IS STRICTLY
PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32″
ANGULAR: MACH .01
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .002
Description
CheckedBy
Stock Size
Material
COMMENTS: NAME DATE
VAC-TRON EQUIPMENT LLC
TITLE:
SIZEB
DWG. NO. REV
SHEET 4 OF 4
DO NOT SCALE DRAWING
VendorNo
06/27/19
LP 800 SDT HVY
Greg Miller
LP0873-49DT-X5
As Specified
DrawnBy
As Specified
UNLESS OTHERWISE SPECIFIED:
LP 800 SDT HVY
5 Affected Products
Vehicle
MAKE | MODEL | YEAR |
VAC-TRON | LP 873 SD | 2015-2019 |
9 Associated Documents
Recall Acknowledgement
RCAK-19V442-1939.pdf 245.809KB
Defect Notice 573 Report
RCLRPT-19V442-9628.PDF 212.496KB
Miscellaneous Document
RMISC-19V442-8398.PDF 1487.126KB
Miscellaneous Document- Proposed changes to LP873SDT Heavy
RMISC-19V442-4305.PDF 1494.534KB
Recall 573 Report- Amendment 1
RCLRPT-19V442-7592.PDF 213.637KB
Recall Quarterly Report #2, 2019-4
RCLQRT-19V442-7591.PDF 211.233KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V442-9029.PDF 211.133KB
Owner Notification Letter(Part 577)
RCONL-19V442-8657.docx 353.359KB
Recall Quarterly Report #3, 2020-1
RCLQRT-19V442-8181.PDF 211.322KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V442&docType=RCL
- Constructed of break resistant plexiglass
- Includes 2 reflectors per package
- Highly reflective and durable material
- Great for indoor and outdoor use
- Can be used on mailboxes, garbage cans, stakes, houses and much more
- Snow driveway markers they are highly visible and easy to install,2-way reflector is easily identified from any direction,Can be clearly seen in any weather
- Red Reflective Driveway Marker Each marker features two round reflectors that are sealed in a plastic housing,very reflective
- Fiberglass Rod Driveway Markers,the length of the fiberglass rod can be freely combined, the longest can reach 51 inches, suitable for all kinds of road signs
- Made of durable fiberglass rod with good flexible feature
- Ideal for marking lanes and curbs to clear snow,Space saving use for any purpose to attract attention to a specific area,Identify potential hazards or boundaries with a reflector marker,Adds safety and visibility to hard-to-see areas
- Waterproof and Serviceable: each circle reflector is made of quality plastic, waterproof, reliable and sturdy, not easy to deform or break, and can be kept for a long time; The surface of the reflector is smooth and comfortable to touch, easy for you to use
- Proper Dimension to Apply: the size of these road reflectors is about 8 cm/ 3 inches in diameter, appropriate and convenient for you to use, without taking up too much space, bringing you more convenience
- Adequate to Meet Your Needs: you will receive 20 pieces of trailer reflectors with 20 pieces of screws; The combination is considerable for you to apply and replace, and can easily meet your daily use and other requirements
- Easy to Operate: our safety reflectors are designed with holes on the middle part, you can easily and effectively install them with the matched screws, and easy to disassemble, saving time and effort
- Assorted Occasions to Apply: these gate reflectors are suitable for diverse kinds of vehicles, including but not limited to trailers, trucks, campers, bicycles, cars, towing, RVs, buses and other vehicles
- [Highly visible]: The top of the driveway markers has a 4-inch diameter double-sided reflector and an 8-inch reflective tape wrapped around the post body, making it easy to see from any direction when the headlights are on. Guide you to enter and exit the garage more safely. In winter, driveway reflectors can prevent your yard from being damaged by Snowplow.
- [Easy to Install]: 10PCS 48 "x 1/4" fiberglass driveway reflectors are smooth and burr free, with a tapered end and a pointed bottom design, making the pile easy to install. The snow stakes pole adopts a three section design, which is more convenient for storage and carrying.
- [High quality]: driveway pile made of glass fiber through pultrusion process. The driveway reflectors on poles is light in weight, but high in strength and toughness, and can be used in ambient temperatures of - 22 to 140 degrees Fahrenheit.
- [Flexibility]: The snow stakes driveway markers has high tensile resistance and is not easy to break. It always recovers quickly after bending without causing any damage.
- [Timely service]: if you have any questions about reflective driveway markers, please contact us and we will deal with it for you within 24 hours.
- Package Contents: each pack contains 16 circular reflectors, the color is red, the quantity is sufficient, the color is prominent enough to meet your usage needs
- Easy to Install: there is a mounting hole in the center of the reflector for screw mounting (screw not included), it can be quickly and easily installed on any flat surface, ensuring it can fit and easy removal or keep the wall dry and clean, tear off the adhesive backing protective film, stick the reflector in place for 24 hours
- Wide Range of Uses: reflectors have a wide range of applications in daily life, suitable for trailers, RVs, campers and other vehicles as well as boats, agricultural machinery, mailboxes, driveway property marking posts, stakes, houses, walls, Doors, bicycles, motorcycles, etc., suitable for indoor and outdoor use
- Quality Material: made of highly reflective, reliable and durable plastic material, with waterproof performance, good waterproof sealing, preventing water droplets from seeping into the interior, and long service life, these reflectors have strong reflective properties, which increases safety and visibility sex, each reflector is 6 cm/ 2.36 inches in diameter
- What the Product Does: the safety reflector provides visibility and signal, in the dark, when the light hits, the reflector has a bright and clear reflection; you can see your lane more clearly at night or in any weather for safe driving, ideal for marking driveways and curbs for snow removal
- Package: 25pcs visibility reflective stickers in 5 colors assortment - red, yellow, silver, orange, blue. Each color has 5 reflective decals. The size of one is approx. 1.2 x 3.25 Inch. Enough quantities and perfect size to meet the daily requirement.
- Sturdy & Durable: Coming with the quality reflective film and self-adhesive sticker of good viscosity, the reflective stickers are strong, durable, weather resistant, waterproof, lightweight, wear & tear resistant.
- Clear Reflective: With the full prism reflection technology, the reflective tape is brightness upgraded of a good transmittance, effectively protecting the safety of vehicle and people when driving, walking at intersections, corners.
- Practical & Safety: The waterproof reflective tape stickers are good at adding visibility and road safety in the dark. The vehicles' lights, flashlight make them more visible, easy to get attention, reducing the occurrence of accidents. Good job for the night warning stickers!
- Multiple Purposes: The high intensity night visibility adhesive is suitable for cars, trucks, scooters, motorcycles, bicycle, trailer and yacht, helmets, mailbox, fence, backpacks, jacket, running vest during go hiking, cycling, traveling, etc.
- 🪞【What You Get】:You will get 45pcs Round Front Reflector Tool Set. This package contains 15pcs round reflectors, a total of 3 colors --white, red and yellow, 5 pieces of each color, along with 30pcs mounting nuts and bolts, sufficient quantities can meet your use and replacement needs. And the outstanding colors can make it clearly.
- 🪞【Premium Quality】:Made of highly reflective and reliable plastic material, they are waterproof and anti-aging, good sealing, prevent water drops from penetrating inside, has long service life, more cost-effective. Fine workmanship, bright and eye-catching, good reflective effect, increased visibility in the dark environment and driving safety.
- 🪞【Easy Installation】: First drill a hole on the surface of the object to be installed, then insert the bolt into the center of the reflector and fix it with a nut. It can be quickly and easily installed on any flat surface and is easy to remove. Keep the wall dry and clean before installation, peel off the adhesive backing protection film and stick the reflector in place.
- 🪞【Various Colors】:There are three colors for you to choose, white, red and yellow, 5 of each color, with diameter of 80mm-3inch , the bright color can quickly attract attention. When there is light in the dark environment, the reflector will produce a clear reflection, reflecting light evenly, not blinding, to provide safety and security for night driving.
- 🪞【Wide Application】: Reflectors have a wide range of applications in daily life for trailers, trucks and other vehicles, as well as boats, mailboxes, stakes, houses, walls, gates, bicycles, motorcycles, etc. They are suitable for indoor and outdoor use, helping you see your driveway more clearly at night or in any weather, adding visibility and safety to night driving.
- Provides Instant Visibility: in the dark, the bright reflector has a clear reflection when light lays it on, which is a helpful accessory for trailers, trucks, campers,cargo carts and other vehicles
- Easy to Mount: a central mounting hole is on the safety reflectors (screws are not included), ensuring a solid installation and easy to disassemble when it is needed
- Waterproof Material: the highly reflective and reliable plastic material is adopted, featuring waterproof and good sealing, and preventing water drips from penetrating inside so that it has a lasting period for using
- Safety Reflector: reflectors have a wide application in daily life, including vehicles, mailboxes, trash cans, posts, wooden piles, houses, walls, gates and so on, giving a cue signal so that it provides safety for the driver at night; The reflected light is uniform and not dazzling
- Adequate Quantity: you will receive 10 driveways reflectors, sufficient quantity to meet your daily needs, you can also share with family members and friends to use
- ✅【Package】8pcs white+8pcs red car reflectors. If you have any questions or concerns about our Safety Reflector, please don't hesitate to contact us.
- ✅【Enhanced Visibility】 Increase your safety on the road with our high-quality Safety Reflector. Its rectangular shape and bright reflectivity ensure its rectangular shape and bright reflectivity ensure you're visible to other drivers, especially in low light or adverse weather conditions.
- ✅ 【Easy Installation】 Our Safety Reflector comes with two convenient installation holes, making it easy to attach to your car, motorcycle, bicycle, or any Simply secure it with the adhesive back and enjoy peace of mind knowing you're visible to others.
- ✅【Premium Material】 Crafted from top-grade ABS plastic, our Safety Reflector is durable and built to last. It withstands the elements, including rain, sun, and harsh temperatures, ensuring reliable performance and longevity.
- ✅【Versatile Use】 Whether you're a daily commuter, a long-distance traveler, or an outdoor enthusiast, our Safety Reflector is a must-have accessory. Use it on your vehicle, backpack, helmet, or clothing to enhance your visibility and stay safe in various situations.
- Material: made of ABS plastics material, durable, wear-resistant, waterproof and long service life.
- Visible reflection: hexagonal honeycomb design, three-dimensional reflection, more angle illumination, more obvious at night, improve vehicle recognition, and keep a safe distance from other vehicles at night.
- Easy to install: There is an installation hole in the center of the reflector for screw installation (excluding screws), which can be installed on any plane quickly and easily.
- Application:You can install it on your fence, gate, mailbox, post, trailer, truck, camper, van and other vehicles, wherever you need safety warning.
- Packaging includes:10 x Red Reflector.
Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.