Loose Wheel Lug Nuts – 2019 Thundercreek SLT 460, SLT 660, SLT 880, MTT 690, MTT 920, FST 750, FST 990, & EV 990 Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

May 13, 2019 NHTSA CAMPAIGN NUMBER: 19V364000

Loose Wheel Lug Nuts

A wheel separation can increase the risk of a crash.

 

NHTSA Campaign Number: 19V364

Manufacturer LDJ Manufacturing, Inc.

Components WHEELS

Potential Number of Units Affected 62

 

Summary

LDJ Manufacturing, Inc. (LDJ Manufacturing) is recalling certain 2019 Thundercreek SLT 460, SLT 660, SLT 880, MTT 690, MTT 920, FST 750, FST 990, and EV 990 trailers. The wheel lugs nuts may loosen, possibly resulting in a wheel separating from the trailer.

 

Remedy

LDJ Manufacturing has notified owners and dealers will ensure that the lug nuts are torqued to the correct specifications, free of charge. The recall began May 21, 2019. Owners may contact LDJ customer service at 1-641-620-4034.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


SERVICE BULLETIN

TCE-SB013 | May 2019

 

THUNDER CREEK EQUIPMENT

 

Subject: Wheel lug nuts

Model Numbers: All Thunder Creek trailers with aluminum rims produced since March 2019

Conditions Found: Lug nuts on tires with aluminum rims may loosen from the wheels.

Facts: After a short period of time, certain trailers may experience lug nuts loosening from the tire rim. Trailer owners should re-torque their lug nuts to prevent loose wheels, broken studs, and possible separation of wheels from the axle.

Solutions: Ensure wheels are torqued to the correct specifications.  Lug nuts should be tightened to 130 ft./lb. for aluminum rims and to 110 ft./lb. for steel rims. The suggested remedy is available immediately.

Repair: Check and retighten lug nuts, following the instructions below:

  1. Only use fasteners matched to the cone angle of your wheel. Start all bolts or nuts by hand to prevent cross threading.
  2. Tighten bolts or nuts in the sequence shown. 
  1. Tighten the lug nuts in stages to 130 foot pounds for times with aluminum rims and to 110 foot pounds for tires with steel rims following the recommended sequence. Recheck the torque setting on the wheel until you confirm the lug nuts have fully seated to the tire rim.
  2. Wheel nuts should be tightened before the first road use, after 100 miles of travel, and after each wheel removal. Check and re-tighten the lug nuts periodically.

Warranty: Warranty labor will be paid at 0.5 hours per trailer corrected.

Reminder: It is a violation of federal law to sell or resell products covered by a safety defect recall.  Dealers should ensure that lug nuts on trailers produced during this time frame are properly tightened prior to selling them to commercial users.

All service reimbursement claims must be emailed to ryanb@thundercreek.com.

 


SERVICE BULLETIN

TCE-SB014 | October 1, 2019

 

THUNDER CREEK EQUIPMENT
ThunderCreek.com

 

SERVICE CONTACT
Ryan Baarda
1833 Highway 163 | Pella, IA 50219
P: 866.535.7667
F: 641.620.8302
E: ryanb@ldj-products.com

 

Subject: Wheel and Wheel Center Cap Replacement

 

Affected Products: Thunder Creek trailers with aluminum rims produced between March and May of 2019. If your trailer wheels meet both of the conditions listed below, then your trailer is affected by this service bulletin.

  1. Aluminum rims (8 bolt only) with a model year of 2019.
  2. The affected wheels are the brand “Sendel” (ST20). The valve stem (on affected products) is next to, or lined up with one of the holes on the wheel (not between two holes). See the pictures below.

 

Sendel (ST20)  Other Brand

Ⓐ Affected wheels are the brand “Sendel” and have a valve stem (circled) that is lined up with the wheel hole.

Ⓑ Other Brands have a valve stem (circled) that is between two wheel holes and are not included in this service bulletin.

If you have questions about whether or not your trailer is affected, send your VIN number (see below) and a picture of your wheels to Thunder Creek Equipment at this email address:  ryanb@ldj-products.com.

 

VIN location         VIN number tag

 

Issue Description: The wheel center caps on affected trailers could cause the wheels to come off the trailer.

 

Required Action: The wheels must immediately be removed and inspected. The inspection results will determine which of the two procedures below you need to follow:

 

  1. If the lug nut bore holes are undamaged:

If the lug nut bore holes are undamaged and do not show any wear or threading problems, the wheels may be put back on the trailer and lug nuts re-tightened. However, the affected wheel cap should be immediately removed and cannot be used again. Since the wheel center caps are for appearances only, you may use the trailer after the wheels have been securely fastened, without the center cap. Tighten the lug nuts in stages, per the axle Owner’s Manual, to 130 ft./lbs. And, contact Thunder Creek Equipment to get new wheel center caps.

 

Use this torque pattern when tightening lug nuts:

  1. If the lug nut bore holes or rims are damaged, show wear or threading problems:

The trailer cannot be used until the damaged wheels are replaced. Contact Thunder Creek Equipment for new wheels and new center caps. Install the new wheels and center caps before using the trailer.

Warranty: Warranty labor will be paid at 0.5 hours for center cap replacement and 1 hour for rim replacement.

Reminder: It is a violation of federal law to sell or resell products covered by a safety defect recall.  Dealers should ensure that center caps covered by this service bulletin are removed from wheels prior to selling to commercial users.

 

Parts will be sent UPS with a return label for sending back damaged parts. Please photograph and return all out of specification center caps and all damaged Sendel S20T aluminum rims. All service reimbursement claims including photos of out of specification center caps and damaged rims must be emailed to ryanb@thundercreek.com.


Loose Wheel Lug Nuts: Draft Owner Letter

Safety Recall: Loose Wheel Lug Nuts

Vehicles Affected: SLT 750, MTT 750, FST 750, SLT 990, MTT 990, FST 990 purchased since March 2019

National Highway Traffic Safety Administration (NHTSA) Recall Number: 19V364

Dear Thundercreek Trailer Owner,

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.  LDJ Manufacturing, Inc. has decided that a defect could exist which relates to motor vehicle safety exists in certain SLT 750, MTT 750, FST 750, SLT 990, MTT 990, and FST 990 trailers.

 

What is the concern?

A trailer maintenance concern has been identified with lug nuts loosening from aluminum rims on tires used on these trailers after a short period of time.  Some trailers have been experiencing loosening lug nuts with a risk of the wheels loosening which could cause the wheels to come off of these trailers. If repairs are not made, the issue can cause a crash without warning.  LDJ Manufacturing, Inc. recommends that owners not operate the trailer until the necessary repair has been performed.

 

What will LDJ Manufacturing, Inc. and your authorized LDJ Manufacturing, Inc. trailer dealer do?

LDJ Manufacturing, Inc. is carrying out a recall on the trailers mentioned above.  An authorized LDJ Manufacturing, Inc. trailer dealer will ensure that lug nuts on these wheels are torqued to the correct specifications.  There will be no charge for this repair under this program.

 

What should you do?

LDJ Manufacturing, Inc. will remedy the issue without charge to the owner of the trailer.  To have you trailer repaired, contact the dealer where the trailer was purchased, inform them that you received a copy of this notice, provide your vehicle identification number (VIN), and request a service date to complete the work required under this recall.

If repairs need to be made through service facilities other than the dealer where the trailer was purchased, please contact Ryan Baarda, whose contact information is located at the end of this letter, who will provide a technical service bulletin to the service facility conducting the repairs with instructions describing the modifications needed to correct the issue and reimbursement instructions for the repairs required.

 

How long will it take?

Repairs for impacted trailers are available immediately as no new parts are needed to make the repairs.  Repairs will be reimbursed for up to .5 hours of labor per trailer being corrected.

 

What if you have already paid to have repairs completed at another location?

If you have paid to have your trailer repaired prior to receiving this letter, you may be eligible for reimbursement through LDJ Manufacturing, Inc.’s program for reimbursing pre-notification remedies for repairs related to this issue.  For more information, please reach out to Ryan Baarda for information on how you can be reimbursed for repairs you have paid out to remedy these matters.  Prior repairs will be reimbursed for up to .5 hours of labor per trailer being corrected.

 

Attention Leasing Agencies:

If you are the owner of a trailer who is leasing the trailer to another individual using the trailer, federal regulations require that any vehicle lessor receiving this notice must forward a copy of the Owner Letter to the vehicle lessee within ten days.

 

What should you do if you have further questions?

If you have any questions or concerns, please contact the Service Manager at your authorized LDJ Manufacturing, Inc. dealer for assistance.  If you have any queries or concerns that your local dealer cannot address, please contact Customer Product Support and Quality Inspector Ryan Baarda at: 866.535.7667 toll-free or 641.620.4037 direct, or email ryanb@thundercreek.com.

If you have the need to contact LDJ by mail, please use the following address:

LDJ Manufacturing, Inc.
ATTN: Ryan Baarda
1833 IA-163
Pella, IA 50219

 

If after having attempted to take advantage of this recall you believe you have not been able to have your vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.

 

Sincerely,

Ryan Baarda
Product Support & Quality Inspector


4 Affected Products

Vehicles

MAKE MODEL YEAR
THUNDER CREEK EV 2019
THUNDER CREEK FST 2019
THUNDER CREEK MTT 2019
THUNDER CREEK SLT 2019

 


9 Associated Documents

Defect Notice 573 Report

RCLRPT-19V364-7264.PDF 214.543KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.51 KB]

 


Owner Notification Letter(Part 577)

RCONL-19V364-7195.pdf 120.906KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [118.07 KB]

 


Recall 573 Report-Amendment 1

RCLRPT-19V364-1672.PDF 214.549KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.52 KB]

 


Recall Acknowledgement

RCAK-19V364-1134.pdf 244.933KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.19 KB]

 


Recall Quarterly Report #3, 2019-4

RCLQRT-19V364-9604.PDF 211.293KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.34 KB]

 


Recall Quarterly Report #1, 2019-2

RCLQRT-19V364-2852.PDF 211.109KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.16 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-19V364-0517.pdf 232.482KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [227.03 KB]

 


Recall Quarterly Report #2, 2019-3

RCLQRT-19V364-7725.PDF 211.207KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.26 KB]

 


Remedy Instructions and TSB

RCRIT-19V364-1536.pdf 448.57KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [438.06 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V364&docType=RCL

 


 

SaleBestseller No. 1
MIKKUPPA M12x1.5 Lug Nuts - Replacement for 2006-2019 Ford Fusion, 2000-2019 Focus, 2001-2019 Escape Aftermarket Wheel 20pcs Chrome Closed End
  • 🚗 WE' RE DIFFERENT - MIKKUPPA innovative closed end bulge Lug Nuts design provides a safer and more reliable closed end nut than any other on the market. One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. 【This kit does not hold the wheel cover! ! !】
  • 🚗 PERFECT FIT - Replacement for 2004-2019 Acura TSX. 2002-2019 Chevy Trailblazer, 2001-2019 Ford Escape, 2000-2019 Ford Focus, 2006-2019 Ford Fusion, 1999-2019 Honda Accord/CR-V, 2005-2019 KIA Sportage LX EX, 1995-2019 Toyota Avalon, etc.
  • 🚗 SPECIFICATION - M12x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 35.05mm long - 22mm wide - color: silver / chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
  • 🚗 ONE-PIECE LUG NUTS - The one-piece structure design is more splendid and safer than the two-piece design. Triple chrome, cold forged and heat treated steel, anti-rusting and anti-stripped, high strength and durability.
  • 🚗 WORRY-FREE SHOPPING EXPERIENCE - We go above and beyond to provide the highest quality wheel lug nut and top notch customer service. Contact us and we will give you a satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
SaleBestseller No. 2
White Knight 1707S-20AM Chrome M12x1.50 Bulge Acorn Lug Nut, 20 Count (Pack of 1)
  • For Select Aftermarket and Factory Wheels.
  • Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
  • Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
  • ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
  • 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
Bestseller No. 3
MIKKUPPA M14x1.5 Lug Nuts - One-Piece Chrome OEM Factory Style Large Acorn Seat Lug Nuts 7/8" Hex Replacement for 199-2022 Chevy Silverado 1500, 1999-2022 GMC Sierra 1500 24pcs
  • 🚗 FITMENT - Replacement for 1999-2022 Chevy Silverado 1500, 2012-2022 Suburban, 2001-2022 Tahoe, 2000-2022 GMC Yukon, 1999-2022 Sierra 1500, and fit all m14x1.5 7/8" hex conical seat wheel nuts.
  • 🚗 SPECIFICATION - M14x1.5 Thread - closed end bulge style lug nuts - conical 60 degree seat - 7/8" (22mm)hex - 1.46" Hight - color: silver / chrome.
  • 🚗 ANTI-OXIDATION - Triple chrome, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability).
  • 🚗 QUALITY - One-piece design, meets or exceeds OEM factory standards. It is perfect for those who live in the rust belt or an area that salts the roads during the winter.
  • 🚗 WORRY-FREE SHOPPING EXPERIENCE - Contact us and we will give you a 100% satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
Bestseller No. 4
White Knight 1/2"-20 Thread Lug Nuts for Aftermarket or Factory Wheels - 20 Chrome Lug Nuts - Open End Bulge Acorn Seating - Carbon Steel for Durable Construction & Easy Installation - 1304-1S-20AM
  • Complete Package - 1/2 x 20 Lug Nuts, Chrome, Open-End Bulge Acorn Lug Nut
  • Specifications - 1/2-20 lug nuts, Thread Pitch, 0.84†Overall Height, 0.9†Diameter, 60-degree Conical Seat, Open-End Bulge Acorn Design. For 5 Lug Wheels.
  • Durable Finish - The zinc finish on these lugnuts not only enhances the luster of your wheels but also provides protection against rust and corrosion, ensuring they look great for years to come.
  • Lug Nuts Aftermarket - Designed specifically for aftermarket 5-lug wheels, these wheel nuts are not recommended for use on OEM wheels, ensuring you get the best possible performance and compatibility.
  • Features - Zinc finish, cold-forged and heat-treated to industry standards. Solid 1-pc lugnut design offers durable, rigid construction. Open-End style allows for use on any length stud, great for trailers or wheel spacers.
Bestseller No. 5
MIKKUPPA M14x1.5 Lug Nuts, Replacement for Silverado, Ford, GMC Aftermarket Wheel - 24pcs Chrome Closed End Bulge Acorn Lug Nuts
  • 🚗【1.80" LONG】M14x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 1.80 in. long - 0.90 in. wide - color: Chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
  • 🚗 【PERFECT FIT】Replacement for 2007-2013 Avalanche, 2015-2021 Colorado, 2003-2014 Express 1500, 1999-2021 Silverado 1500, 2015-2021 Suburban, 2000-2014 Suburban 1500, 1995-2020 Tahoe, 2009-2020 Traverse, 2007-2020 Acadia, 2015-2020 Canyon, 1999-2020 Sierra 1500, 2000-2020 Yukon, 2015-2020 F150/Expedition.
  • 🚗【ONE-PIECE DESIGN】On vehicle testing, one-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. Our products have undergone extensive on-vehicle testing to ensure proper fit and long-lasting performance before selling them.
  • 🚗【ANTI-RUST PROCESS】The surface of the lug nut is chrome-plated, after 72 hours of strict salt spray test, which not only makes the nut resistant to oxygen and corrosion, but also gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will Not fall off easily. Manufactured with high-quality SCM 435 Steel (Heat Treated) for stronger.
  • 🚗【WORRY-FREE SHOPPING EXPERIENCE】If there is a problem with the number of missing nuts, please don't hesitate to contact us. Every MIKKUPPA product enjoys a 24-hour response, a 30-day unconditional refund and a 1 year warranty. Professional customer service promise to give you a satisfied solution.
SaleBestseller No. 6
SCITOO M12x1.25 Wheel Lug Bolt 12x1.25 Lug Nut Bolts 20 Pcs Silver Shank Length 28mm Compatible with for Jeep Compass for Renegade for Cherokee, for Fiat, for Chrysler 200, for Dodge Dart
  • 🚙【WHEEL BOLT LUG NUTS COMPATIABLE VEHICLES】M12x1.25 wheel bolt compatible with 2017-2019 for Compass,2014-2023 for Cherokee,2015-2022 for Renegade, 2015-2017 for Chrysler 200, 2013-2016 for Dodge Dart, 2012-2017 for Fiat 500
  • 🚙【FEARTURES】20 Pcs wheel bolts lug nuts are 12*1.25, shank length 28mm. Hex Size:17mm, Seat:Conical/60 grade 35CrMo Lug Nuts are Cold Forged/Exceeds OEM Quality
  • 🚙【HIGH QUALITY】These M12x1.25 wheel studs lugs nuts are made from 35CrMo which have tested and meet or exceed OEM performance requirements
  • 🚙【PLEASE CHECK】 Check your original thread pitch and seat type carefully, this only fit for M12x1.25 and conical/cone seat as shown
  • 🚙【BUYING SERVICE】We provide ONE YEAR WARRANTY for our this product.If you have any questions about products, please feel free contact us, we will provide you with the most satisfactory solution
Bestseller No. 7
White Knight 1707SBK-20AM Black Chrome M12x1.50 Bulge Acorn Lug Nut, 20 Pack
  • Country Of Origin : China
  • Height: 1. 40 Inch
  • Hex Size: 3/4 Inch
  • Package Weight : 2.38 Lbs
Bestseller No. 8
12x1.5 Lug Nuts 20 Pcs Chrome Closed End Mag Style Lug Nuts with Washer 13/16" (21mm) Hex Compatible with Toyota Camry/Corolla/Tacoma Lexus
  • One-piece Solid lug nuts feature durable design and provide perfect replacement for your Tacoma, 4Runner, Corolla, GX470
  • Specifications: 12x1.5 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome
  • 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
  • Replace Part # 9094201058, 9008017036, 90942-01058, 9008-17036, 9094201084
  • One-piece lug nuts unlike OEM OEM Cap Construction lug nuts, which means Reeauto's Lug nuts will definitely not break apart like your TOYOTA, LEXUS stock lug nuts
Bestseller No. 9
White Knight 1307-1S-20AM Zinc M12x1.50 Open-End Bulge Acorn Lug Nut, 20 Pack
  • For Select Aftermarket or Factory Wheels or Wheels wih Hubcaps Covers
  • M12 x 1.50 Thread Pitch, 0.79” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Open-End Acorn.
  • Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
  • ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
  • 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
Bestseller No. 10
Wheel Accessories Parts 20 Pcs M12 x 1.5 12 x 1.5 Thread Bulge Acorn 35mm 1.38" Long Lug Nuts Chrome 3/4" 19mm Hex Fits Many Chevy Honda Passenger Cars | Toyota Pass Cars with Aftermarket Wheels
  • 20 Pcs | M12 x 1.5 12 x 1.5 Thread | Type: Bulge Acorn | Length : 35mm 1.38" | Finish: Chrome | Hex: 3/4" 19mm | 2 Piece Construction
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits Chevrolet 1982-2002 Camaro 1991-96 Caprice 1984-2019 Corvette 1982+ Malibu 2012-20 Sonic 2013+ Spark|Dodge 1983-87 Charger | Ford 2013-19 C-Max 1995-2000 Contour 1981-2003 Escort 2001-19 Fiesta 2012-18 Focus| Hyundai 2006-17 Azera 2007+ Elantra 2013-14 Elantra Coupe 2013-20 Elantra GT 2022+ Elantra N 2009-16 Genesis 2010-16 Genesis Coupe 2017+ Ioniq 2004+ Sonata 1985-87 Veloster 2019+ Veloster N
  • Designed In USA - Two Piece Design ensures secure clamping in the event of wrong lug nut length. Cap will break protecting you from false torque readings. Giving you peace of mind. Meets or Exceeds OEM Factory Standards.
  • Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...