Front Brake Lever May Break – 2019 Yamaha YZFR3 Motorcycles

“This site contains affiliate links for which OEMDTC may be compensated”

May 2, 2019 NHTSA CAMPAIGN NUMBER: 19V341000

Front Brake Lever May Break

A broken front brake lever can affect front braking ability, increasing the risk of crash.

 

NHTSA Campaign Number: 19V341

Manufacturer Yamaha Motor Corporation, USA

Components SERVICE BRAKES

Potential Number of Units Affected 198

 

Summary

Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2019 YZFR3 motorcycles. Porosities in the front brake lever may cause it to break if it is gripped with a strong force.

 

Remedy

Yamaha will notify owners, and dealers will inspect and replace the front brake lever, as necessary, free of charge. The recall began May 15, 2019. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha’s number for this recall is 990128.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Yamaha Recalls

 


MOTORCYCLE 5/15/2019 M2019-002R

 

CERTAIN 2019 YZFR3K (“YZF-R3”) AND YZFR3AK (“YZF-R3 ABS”) MODELS FACTORY MODIFICATION CAMPAIGN – Front Brake Lever

INTRODUCTION

 

Yamaha Motor Corporation, U.S.A. has decided that a defect which relates to motor vehicle safety exists in certain 2019 YZFR3K (“YZF-R3”) and YZFR3AK (“YZF-R3 ABS”) motorcycles. In affected units, there is the potential for the front brake lever to have been manufactured with porosities in the material. Porosities in the material could allow the lever to break while applying a strong gripping force. A broken lever could cause sudden loss of front braking ability and a crash with injury or death.

To correct this defect, Yamaha is initiating a Factory Modification Campaign. Affected units must have the brake lever (Lever 2) inspected and, if found to have an affected manufacturing code as described in this bulletin, replaced with a new one that was manufactured correctly.

Yamaha is notifying all registered owners of affected motorcycles by US mail. A copy of this letter is included in this bulletin. The customer should take this letter along with the affected motorcycle to an authorized Yamaha dealer for modification.

If your dealership was invoiced for one or more affected units, a computer report listing all affected motorcycles invoiced to your dealership is mailed with this bulletin. Use the list to help ensure all affected motorcycles are modified. All sold motorcycles that have been registered with Yamaha will show the customer’s name and address.

You must inspect and, if necessary, modify all affected motorcycles in your inventory as well as all customer owned motorcycles brought to you for this service. If you purchase a motorcycle from another dealer or Yamaha, check to see if the procedures in this bulletin have already been performed before you sell the motorcycle.

Motorcycles that are affected should not be operated until they are modified. It is a violation of Yamaha policy for your dealership to deliver any affected motorcycle to customers until the procedures in this bulletin are performed.

When the modification on each motorcycle is performed, follow the Warranty Information section of this bulletin to receive reimbursement. Be sure to use the Factory Modification Campaign procedures in Chapter 7 of the Warranty and Y.E.S. Handbook (LIT-11760-00-16).

 

DEALER ACTION SUMMARY

Unsold & Sold Units: Use YDS Unit Status to check to be sure the unit is affected and that it is not already modified, and then inspect the stamped manufacturing code on the underside of the brake lever as instructed in this bulletin. If the lever has an affected manufacturing code, replace the lever with a new one.
Parts: Yes, but only if inspection shows that the brake lever is stamped with one of the affected manufacturing codes. See the Parts Information section.
Warranty: Factory Modification Campaign. See the Warranty Information section of this bulletin. This modification applies to all affected units regardless of ownership or warranty status.
Notify Customers: Yes, you must immediately contact any customer if a motorcycle shows as unregistered on the enclosed report. Yamaha has sent letters to customers whose motorcycles were registered with Yamaha as of 5/14/2019.

 

AFFECTED RANGE

Model Model Code Primary ID
Prefix From To
2019 YZF-R3 B8P1 RH17Y 0002641 0002720
2019 YZF-R3A B5L2 RH18Y 0002241 0002440

 

SERVICE PROCEDURES

Inspection

Inspect the stamped manufacturing code on the underside of the front brake lever. If the brake lever has stamping code K3 9A 16 or K4 9A 16 (shown), replace it with a new one.

Important:

If an affected motorcycle has the accessory Yamaha R3 Brake Lever (1 WD-H39A0-V0-00) or another aftermarket brake lever, confirm whether or not your dealership or the customer retained the stock brake lever. If so, inspect it according to these bulletin instructions.

Replacement

If the lever has stamped code K3 9A 16 or K4 9A 16, refer to the Service Manual (YZFR3K: LIT-11616-28-57 or YZFR3AK: LIT-11616-30-55) to replace the front brake lever (Lever 2). Discard or recycle the brake lever so it cannot be accidentally reused.

 

IDENTIFICATION PROCEDURE

After inspecting or inspecting and modifying a unit, make sure to properly record and submit the special warranty claim for this safety recall to ensure correct reimbursement and to update the units repair history in Yamaha’s database.

 

PARTS INFORMATION

Order a replacement brake lever for each affected unit if that has an affected manufacturing code on the original lever.

Part Number Kit Part Name Dealer Cost
IWD-H3922-OO-OO LEVER 2 (BRAKE LEVER) $11 .52

 

WARRANTY INFORMATION

The owner of each registered motorcycle will receive a letter announcing this campaign. The customer’s letter includes the unit’s VIN and Recall Number.

The inspection and, if necessary, modification is authorized for all affected motorcycles, both sold and unsold, regardless of ownership or warranty status. You do not need the customer’s letter to perform the inspection/ modification or to file for reimbursement.

Submit a Recall Claim as described below using Campaign Number 990128 and choose either Inspected or Modified. The labor allowance is 0.2 hour for either inspection or inspection and modification.

YDS:

To submit your Recall Claim in the warranty system on YDS, go to Service > Warranty Claims /Authorization > Claims / Authorization > New > Warranty Claim. Then, from the menu, select Recall / Service per Bulletin Claim.

If you have any questions about proper procedures for Factory Modification Campaigns, see Chapter 7 in your Warranty and Y.E.S. Handbook (LIT-11760-00-16).

 


IMPORTANT SAFETY RECALL NOTICE

This notice applies to your vehicle, VIN     Model:

May 15, 2019

 

990128

 

Dear Yamaha Owner:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Yamaha Motor Corporation, U.S.A. has decided that a defect which relates to motor vehicle safety exists in certain 2019 YZFR3K (“YZF‐R3”) and YZFR3AK (“YZF‐R3 ABS”) motorcycles. Our records indicate that you own the affected motorcycle shown above.

The reason for this recall: In affected motorcycles, there is the potential for the front brake lever to have been manufactured with porosities in the material. Porosities in the material could allow the lever to break while applying a strong gripping force. A broken lever could cause sudden loss of front braking ability and a crash with injury or death.
What Yamaha and your dealer will do: To correct this defect, your authorized Yamaha dealer will inspect the front brake lever to see if it has a manufacturing date code that identifies it as possibly being defective due to porosities in the material. If so, they will replace the front brake lever with a new one. The procedure takes about 15 minutes to do, but be aware that your Yamaha dealer may need to keep your motorcycle longer. There will be no charge to you for this procedure.
What you should do now: Please call your Yamaha dealer to make a service appointment to have the procedure performed. At that same time, you can find out how long they expect to keep your motorcycle to complete this safety recall. Remember to take this letter with you when you take in your motorcycle.

Only ride your motorcycle to the dealership to be repaired. You should avoid riding your affected motorcycle shown above whenever possible until you can get it to the dealer to have this modification performed.

If you are unable to return to the Yamaha dealer who sold you the motorcycle, this service will be performed by any authorized Yamaha motorcycle dealer. To find a dealer near you, call 1‐800‐88‐YAMAHA or visit the Yamaha website at www.yamaha‐motor.com.

If your affected motorcycle has the accessory Yamaha R3 Brake Lever (part number 1WD‐H39A0‐V0‐00) or another aftermarket brake lever installed, and you retained the original lever, please have your dealer inspect it and replace it if needed. If you discarded the original front brake lever, please contact Yamaha Customer Relations as indicated below to let us know that the recall does not apply to you.

If you have had this repair performed before you received this letter, you may be entitled to receive reimbursement for the cost of obtaining a pre‐notification remedy of the problem associated with this repair. For more information, contact Yamaha Customer Relations at 1‐800‐962‐7926.

Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days.

If you need help: If, after contacting your dealership, you have questions or concerns which the dealership is unable to answer, please write to: Yamaha Motor Corporation, U.S.A.

Customer Relations Department
P.O. Box 6555
Cypress, CA 90630

Or call: 1‐800‐962‐7926

If, after contacting Yamaha Customer Relations, you are still not satisfied that we have done our best to remedy the situation without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Auto Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐4249153); or go to https://www.safercar.gov. Refer to NHTSA recall number 19V341.

If you no longer own this Yamaha: If you have sold your motorcycle to another party, please call us toll‐free at 1‐800‐962‐7926 with the name and address of the new owner, along with the serial number shown above your name on the address label above.

 

We’re sorry to cause you any inconvenience, but we are sincerely concerned about your safety and continued satisfaction with our products. Thank you for giving your attention to this important matter.

Sincerely,

Service Support Group

Yamaha Motor Corporation, U.S.A.

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
YAMAHA YZFR3 2019

 


8 Associated Documents

ISSUED Owner Notification Letter(Part 577)

RCONL-19V341-9617.pdf 157.881KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [154.18 KB]

 


Recall Acknowledgement

RCAK-19V341-5517.pdf 246.309KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.54 KB]

 


Miscellaneous Document – Defect Information Report

RMISC-19V341-5161.pdf 286.954KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [280.23 KB]

 


Defect Notice 573 Report

RCLRPT-19V341-5656.PDF 214.446KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.42 KB]

 


Remedy Instructions and TSB

RCRIT-19V341-0988.pdf 974.527KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [951.69 KB]

 


Recall Quarterly Report #3, 2019-4

RCLQRT-19V341-4582.PDF 211.318KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Recall Quarterly Report #1, 2019-2

RCLQRT-19V341-3750.PDF 211.135KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #2, 2019-3

RCLQRT-19V341-5130.PDF 211.23KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V341&docType=RCL

 


 

Bestseller No. 1
MZS Black Motorcycle Brake Clutch Levers Adjustable Short CNC Compatible with KLE300 KLE300X | KLX150S KLX125 KLX250 | KLX230 KLX230R KLX300 | Z125 Z250SL Z300 Z400 | EX250 EX300 EX400
  • IMPORTANT NOTE - Please check "vehicle fitment list" to make sure that this model type and year work for your bike before ordering. Be sure to strictly follow the installation instructions to check and test before riding, recommended that professionals install this product. And we provide lifetime technical support, make sure you will no worries.
  • UNIQUE DESIGN - MZS Clutch Brake Levers use modern CNC and laser techniques which ensure a long life of the product and a good visibility of the laser graved logo, shape and design of the lever follow ergonomic viewpoints.
  • ADJUSTABLE REACH - By simply adjusting a setscrew on the MZS brake clutch lever, the reach can be adjusted to accommodate the smallest to the largest hands and gives the best clutch or brake response.
  • UNBREAKABLE - The beautiful shiny finish with anodized treatment CNC short lever improves corrosion resistance and hardness, and prevents bending and damage at the time of crash. And it is covered with the skidproof stripe which can enhance the touch feel and friction, not easy to slip on.
  • HIGH QUALITY COMPONENTS - MZS Motorcycle levers use chrome steel precision sealed bearings, stainless steel pivot and bushing parts, chrome slicon cantilever springs, CNC billet 6061 aluminum and chromoly fasteners.
Bestseller No. 2
ESEWALAS Clutch Lever,Bike Brake Levers,Car Accessories 7/8" 22mm Left and Right Universal Clutch Brake Handle Levers Perch,Compatible with CRF50 XR50 Dirt Bike Motor Motocross Motorcycle
  • [Package Includes] The package includes 1 pair of alloy brake rods (1 left clutch brake rod, 1 right brake rod), 1 wrench, and 3 tie straps.
  • [Durable Material] The clutch brake handle is made of high-quality aluminum alloy, which is wear-resistant and rust resistant, sturdy and not easily broken, making it very durable.
  • [Size] Total length: 6.54 inches, total width: 1.81 inches, total height: 2.95 inches, mounting hole: 0.87 inches.
  • [Joystick] The universal clutch brake handle is suitable for 7/8 "joysticks. Placement on the vehicle: front, left.
  • [Compatibility] Compatible with off-road bicycles and motorcycles with a handle diameter of 7/8 inches, such as XR80 CRF70 CRF80 XR100 CRF100, etc. Please check the dimensions before purchasing.
Bestseller No. 3
FVRITO 7/8" 22mm Universal Clutch Brake Handle Levers Perch for CRF50 CRF70 CRF80 CRF100 CRF150 XR50 XR80 XR100 ATC 200m Pit Dirt Bike Motor Motocross Motorcycle Baja Mini Bike MB200 Left and Right
  • 【Fitment Modles】Hond* CRF50 CRF70 CRF80 CRF100 CRF150 XR50 XR80 XR100 XR100R xr200r ATC 200m Pit Bike.
  • 【Fitment Modles】Massimo MB200,Baja Mini Bike MB165 & MB200 (Baja Heat, Mini Baja, Baja Warrior).
  • 【Size】 Overall Length : 166 mm/ 6.54 inch, Overall Width : 46 mm/ 1.81 inch, Overall height : 75 mm/ 2.95 inch, Mounting holes : 22 mm/ 0.87 inch.
  • 【Package Contents:】1 x lfet Clutch Brake Lever, 1 x Right Brake Lever, 1 x Wrench, 3 x Tie.
  • 【Note】Please check your Bike handle bar diameter is 7/8 inch before purchase.. Or leave us messages for assistance if you are not sure about the fitment.
Bestseller No. 4
CNCMOTOK Universal Right Left Brake Lever fit for GY6 50cc 125cc 150cc 139QMB 157Q Roketa Jonway Taotao Chinese Scooter Moped Parts
  • Perfect match :compatible with GY6 50cc 125cc TaoTao 150cc 139QMB 157Q Chinese Scooter Moped
  • Size: Lever length :145mm,Mounting Inner Diameter: 6mm
  • Package include:2 x brake lever,1 x Wires ,2 x Mounting Screws
  • Professional after-sales:We sell professional auto parts ,and provide technical support. If you have any problems or dissatisfaction after receiving the products, We will solve the problem as soon as possible
Bestseller No. 5
KIMISS Hydraulic Brake Lever, Motorcycle Master Brake Cylinder Brake Cylinder Clutch Lever Master for 300 TRX300FW 4x4 1988-2000
  • 【Fitment】--- Handlebar brake master cylinder universal for Honda FourTrax 300 TRX300FW 4x4 1988-2000. It is designed to match the original standard for seamless integration.
  • 【Excellent material】--- This motorcycle brake and clutch master cylinder kit is made of anodized aluminum to enhance its stable performance, resistance, rust resistance, fading, and durability.
  • 【Strong braking】--- This Powersports Brake Levers Provides perfect lever position, flexibility, Excellent braking and increased pressure, facilitate the use of different drivers, good braking performance, and increased riding safety.
  • 【Observable oil】 Vertical oil pot tube is very easy and convenient to empty, Oil mass can be clearly observed with visible oil pot tube.Precision-machined pivot holes ensure perfect fit. Good braking performance, increase riding safety.
  • 【Stylish design】--- Overall horn appearance, contour shape is more coordinated, With a unique design and shiny colors on the surface, your motorcycle is more eye-catching and adds a sense of style.
Bestseller No. 6
Brake Master Cylinder Clutch Lever 1" 25mm Compatible with Honda VT600 VT750 VT1100 VT1300 VTX1300 VF750, Left & Right Motorcycle Brake Lever - Black
  • Manufacturer Part # 45510-MFR-305 53172-MR1-000 53178-MAH-000
  • Fitment: Fit for following Honda Motorcycle ▶ VF750 1994-2003 (Magna/Magna Deluxe) ▶ VT600 1988-2007 (Shadow VLX/Shadow VLX Deluxe) ▶ VT750 1998-2020 (Shadow Aero/Shadow Phantom/Shadow Spirit/Shadow ACE/Shadow RS) ▶ VT1100 1995-2007 (Shadow/Shadow Spirit/Shadow ACE/Shadow Sabre/Shadow Aero) ▶ VT1300 2010-2020 (Stateline/Sabre/Interstate/Fury) ▶ VTX1300 2003-2009
  • Material: Using aluminum alloy as material, it is high strength and high hardness. Easy to install without modification.
  • Package: There have 1 piece Clutch Lever with Bracket Assy(Left) and 1 piece Brake Master Cylinder Assy(Right) in the M MATI customized box, which will gain best protection when shipping.
  • Service: If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
Bestseller No. 7
Universal Motorcycle 7/8" 22mm Handlebar Brake Master Cylinder Clutch Lever - Premium CNC Left & Right Set Design for Honda Kawasaki Suzuki Yamaha - Enhance Control and Safety
Bestseller No. 8
2 PCS Faux Leather Motorcycle Lever Covers with Fringes, Motorcycle Brake Clutch Lever Covers Grip Tassels Motorcycle Handlebar Handle Grip Covers, Fringed Leather Lever Covers Wraps with Skulls
  • [Faux Leather Lever Covers] - The motorcycle lever covers are crafted from durable, thick, strong and supple PU leather. The faux leather straps used to tie the covers are thick and very strong, which won't broke easily when you try to lace up.
  • [More Safer and Comfortable] - Designed with anti-skid surface to improve lever grip and prevents slipping when you are sweating or in the rain. The motorcycle grip covers will make riding more comfortable thanks to their soft touch.
  • [Fashionable Design] - The motorcycle grip tassels are a cool and unique way to make your ride stand out. Their stylish design is suitable for decorating your vehicle and enhancing the appearance of motorcycles. Fringe and skull accents are designed for a super cool look. The skull beads can keep fringes from wrapping around your wrist and make fringes hang wonderfully. The grip tassels are a great choice for dressing up motorcycle. Choose your color to best match your bike and/or leathers.
  • [Easy Installation] - The motorcycle leather lever wraps are easy to put on. Simply cover them on the original brake clutch levers and tighten them with faux leather laces.
  • [Dimensions & Universal Fit] - Fringes measure 9.25" long, total length measures 13.78” long. Cover measures 4.53" long x 2.24" wide. Adjustable lacing provides a perfect fit for most motorcycle grips.
Bestseller No. 9
LisylineAuto Motorcycle Brake Clutch Lever Blue 7/8" 22mm Handlebar Brake Master Cylinder Left & Right Set Compatible with Harley Honda Kawasaki Suzuki Yamaha
  • Motorcycle Brake Clutch Levers Are Machined from Billet 6061-T6 Aluminum, and has a long service life.
  • Blue Brake levers and clutch levers are adjustable.Each brake master cylinder clutch lever with the number from 1 to 6, you can toggle the gear button to reset the gears to adjust the lever distance to the bar.
  • Convenient use: The brake lever is easy to install and disassemble, which is convenient for you to use and effectively protect your hands from being damaged by external force.
  • Function: Left Lever is matching work with cable and right brake master cylinder is hydraulic brake type.The pivot design allows the lever to fold outward to prevent bending or breaking in the event of a crash
  • Universal Fit Hydraulic Brake lever and Cable Clutch lever, fit on most brand 125c.c. to 400 c.c. Sport bike / Street bike / Scooter / Dirt Bike with 7/8" (22mm) Standard Handle bar ( the piston bore size smaller than 12.7mm !)
Bestseller No. 10
Keenso 1 Pair Motorcycle Brake Handle Levers, 22mm Brake Lever Handle Double Disc for Yamaha Honda Suzuki GY6 Xmax 400(Red)
  • 【Smooth & Rustproof】This motorcycle clutch and brake levers has surface paint finish for enhancing its corrosion and rust resistance, not fading and rust. Smooth and bright color, unique appearance for increasing your racing unique
  • 【Precision Processing】Precision machined pivot bore to ensure a perfect fit. CNC cutting, exquisite and smooth lines, an add-on decoration to makes your motorcycle to be eye-catching. Paint finish shell and arm, ritzy and luxury to makes your motorcycle to be attractive
  • 【Sturdy & Durable】Our motorcycle brake levers are made of aluminum alloy material, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
  • 【Easy Installation】Motorcycle brake handle has simple installation process, practical and convenient to use, no modification required. The end of the ball joint will not crack and they felt tightly when tightened all the way
  • 【Wide Compatibility】Universal motorcycle lever fit for most of motorcycles, such as for Yamaha Honda Suzuki GY6 XMAX 400. Good brake performance, increase riding security

Last update on 2024-04-19 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...