| “This site contains affiliate links for which OEMDTC may be compensated” |
January 9, 2018
Starter Lock-Out Relay Failure Causing No-Start
The damaged starter lock-out relay may prevent the vehicle from starting, hindering personnel from responding to emergencies.
NHTSA Campaign Number: 18V019
Manufacturer E-One Incorporated
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 1,147
Summary
E-One Incorporated (E-One) is recalling certain 2013-2017 Cyclone II, Typhoon, and Quest II emergency vehicles equipped with a Cummins ISL, L9, ISX15, or X15 engine. The affected engines do not have a diode in the starter solenoid circuit to improve the longevity of the lock-out relay, resulting in accumulated damage over time.
Remedy
E-One will notify owners, and dealers will install a diode in the starter solenoid circuit and install a new starter lock-out relay, free of charge. The recall began on February 19, 2018. Owners may contact E-One customer service at 1-352-861-3612.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
This notice applies to your vehicle VIN:
UNIT:
IMPORTANT SAFETY RECALL: 18V-019–
NHTSA Recall LETTER
Mar 02, 2018
Dear E-ONE Chassis Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Why is a recall being conducted?
E-ONE has decided that a defect which relates to motor vehicle safety exists in certain models of the following emergency vehicles manufactured Jan. 2013 – Aug. 15, 2017, equipped with Cummins ISL, L9, ISX15, or X15 engines:
E-ONE Typhoon, E-ONE Cyclone 2, and E-ONE Quest 2
The affected vehicles are equipped with a starter lock-out relay which accumulates damage over time caused by high voltage transients emanating from the starter solenoid during startup. High stop/start duty cycles could cause failure of the relay over time.
A failed starter lock-out relay will cause a no-start condition of the engine. Failure of the starter lock-out relay does not pose a risk of unexpected engine shut-down during normal engine operations, neither does it pose a risk to normal safe on-road or on-scene operation of the vehicle while the engine is running.
What are we doing about the problem?
E-ONE recommends installation of a diode in the starter solenoid circuit to improve the longevity of the lock-out relay. Additionally, E-ONE recommends replacement of the existing starter lockout relay with a new one. Vehicles subject to this recall are to be inspected and repaired by an E-ONE certified dealer or technician. E-ONE will compensate the dealer or owner for installing a relay/diode kit (E-ONE part # 1081125), provided free of charge if it has not already been replaced during normal maintenance. Installation of each relay/diode kit should take approximately 1 hour.
If you believe you have a valid warranty claim that extends beyond the relay/diode kit installation, please contact E-ONE Customer Service at 1-352-861-3612 or write E-ONE, 1601 SW 37th Ave, Ocala, FL, 34474.
What should you do?
If you receive this notification, please contact your E-ONE Dealer or E-ONE at 1-800-627-5050 to schedule an appointment to have the installation of the relay/diode kit (E-ONE part # 1081125) performed. This Recall is expected to start on or before March 2, 2018.
INCLUDED WITH THIS LETTER IS AN OWNER RESPONSE CARD THAT MUST BE FILLED OUT AND RETURNED TO E-ONE IN ORDER TO BE REIMBURSED. Please have your Truck
VIN available. After your repair has been completed, please fill in the appropriate information on the enclosed Owner Response Postcard, sign it, and mail it to:
E-ONE, 1601 SW 37th Ave, Ocala, FL, 34474.
If you prefer to contact E-ONE directly, feel free to contact our Customer Service at 1-352-8613612. Please have your Truck VIN available.
What if you no longer own this vehicle?
If you are not the current owner of the vehicle, please indicate this on the Owner Response Postcard and return the card to us.
Federal law requires that any lessor who receives a notification of a safety related defect or noncompliance pertaining to any leased motor vehicle shall send the notice to the lessee within 10 days. If you are no longer the owner of this vehicle, please provide us with any contact information so we may contact the new owner.
If you have already paid to have your vehicle repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. If after having attempted to take advantage of this recall you believe you have not been able to have your vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this safety recall may cause, but your safety is our first concern.
Sincerely,
E-ONE, Inc.
15 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| E-ONE | CYCLONE II | 2013-2017 |
| E-ONE | QUEST II | 2013-2017 |
| E-ONE | TYPHOON | 2013-2017 |
7 Associated Documents
Recall Quarterly Report- Report #1, 2018-1
RCLQRT-18V019-6885.PDF 214.506KB
Loading...
Reload document 
Open in new tab
Remedy Instructions and TSB
RCRIT-18V019-8571.pdf 488.15KB
Loading...
Owner Notification Letter(Part 577)
RCONL-18V019-5632.pdf 351.368KB
Loading...
Defect Notice 573 Report
RCLRPT-18V019-3023.PDF 216.22KB
Loading...
Recall Acknowledgement
RCAK-18V019-4754.pdf 246.096KB
Loading...
Recall Quarterly Report #3, 2018-3
RCLQRT-18V019-1211.PDF 211.319KB
Loading...
Recall Quarterly Report #4, 2018-4
RCLQRT-18V019-8514.PDF 211.423KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V019&docType=RCL
- Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for
- 12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water
- Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors
- Primary leads use 12 a.w.g tinned copper wire. Coil leads use 16 a.w.g
- Nominal Coil Voltage: 12 V DC; Coil Power: 1.8 W; Coil Resistance: 80 Ω; Must Operate Voltage: 6~8 V DC; Must Release Voltage: 0.6~3.6 V DC; Maximum Applied Voltage: 15.6 V DC
- High switching capability: Normally open 40A/14V DC and normally close 30A/14V DC. Suitable for Nilight LED light bar wiring harness kit
- Premium quality: Durable relay and harness socket with 5 wires; Made by high-grade materials to ensure superior quality and long lifespan
- Male-female slot design: Unique male-female slot design, easy to connect the relay with harness socket, clean and neat after installation
- Easy wiring: The relay sockets come with different colors for loads/accessories, simple and convenient wiring
- Package include: 5 x relay and 5 x relay socket with wires.Fit type: Universal fit
- Assembled Relay Fuse Box: This automotive 12v relay box with wiring harness has high capacity holder box, package includes 5pcs 4Pin 40A JD1914 Relays and 1pcs 4 Pin RTT7121 Relay, 6pcs 5A, 10A, 15A, 20A, 25A, 30A blade fuses.
- Solid Material: Joinfworld 12V Fuse and Relay Box is made of high-quality nylon material flame retardant shell, each slot has a precise cutout, and an arc socket is reserved on the edge, so that all your wiring is neat and beautiful.
- Neat Wiring Harness: This 12v car relay fuse box has all the necessary wires pre-wired so you can connect directly to the vehicle, avoiding the hassle of wiring, it is more convenient for your installation and use.
- High performance: Joinfworld 12V Fuse and Relay Box comes with functional powerful insulation shell, with waterproof and dust-proof top cover and bottom cover, wire opening hole is the outlet of all wires, which can be well connected together for better waterproof dust fire prevention.
- Wide Application: The Automotive Relay Box suitable for all vehicles, 4X4 Offroad Jeep SUV UTV ATV RV Pickup Truck Trailer Camper Marine Boat, etc. For any problems, please do not hesitate to write to us.
- Brand new heavy duty SPST(Single Pole Single Throw) relays with color-labeled wires.
- Minimum operating voltage 8V, corresponding minimum operating current is 100mA; Standard operating voltage 12V, corresponding standard operating current is 150mA.
- Small size/Low power consumption/High contact voltage/ High sensitivity.
- Contact Material: Ag Alloy / Contact Resistance: ≤ 100MΩ.
- Life Expectancy Electrical: 100,000 Operation, Life Expectancy Mechanical: 10,000,000 Operation.
- Upgraded Version - Automotive relays built in fuse socket included 30A blade fuses with heavy duty 14AWG wires for main contact. No need of a separate fuse holder, saving space and money. Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- Mounting Design Feature - The interlocking mounting design of unique male and female slot on each socket edge, connect relays together and manage cables easily, offering clean and neat installation.
- Easy Wiring - The relay sockets come with color-labeled wires for load/accessories convenient wiring. Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87)
- Wide Application - Widely used in car keys power control, over-load protection, trunk release, polarity change, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs, control motors/other electronics etc.
- Set includes 5 relays, 5 relay harnesses, and 5 30A blade fuses. 2 Year Warranty by Nilight.
- Quality Materials: The shell is made of PA66 material and pure copper enameled wire, which has good thermal conductivity, can dissipate heat faster and reduce temperature rise. The compact and repairable structure of the sloped trim relay will hardly break or deform, helping you adjust and switch circuits stably.
- Plug and Play: Compatible with the most universal 12V 5-Pin automotive relay with a 40A switching capability. Easy to process your demand. Please check the dimensions and the direction of the poles carefully before ordering to avoid buying the incorrect product.
- Wide Application: Outboard tilt system application and all automotive devices equipped with a 12-volt dc power source car sound systems, security systems, compressor, air.
- Nice Replacement for Many Relays: The electrical relay box can be a nice replacement for 582195, 582472, 582473, 584416, 586147 and 586224, offering you a pleasant using experience.
- Sufficient Quantity for Using: The package comes with 4 pieces of automotive replacement electrical system relays, enough to meet your using and replacing demands in daily life, bringing you lots of convenience.
- 12V waterproof 5-Pin SPDT Relay Excellent waterproof and dustproof ability, high quality in any weather conditions
- 12V 5-Pin SPDT Relay Pin Specifications: Ground (85), VDC (30), Trigger (86), Output N/C (87a), and Output N/O (87).
- SPDT Relay with 40A/30A High Switching Capability,it has both normally open and normally closed terminals, terminal 87A is powered when the relay is inactive and switches the power to terminal 87 when the relay is activated.
- 12v relays can operate with anywhere between 9v and 14v,Very suitable for 12V automotive, marine, and machine circuits.
- These 12V 5-pin relays are rated to handle 30A on normally closed pin 87a and 40A on normally open pin 87.
![TRUE MODS 6 Pack 4-Pin 12V Bosch Style Fused Relay Switch Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPST] [30 Amp] 12 Volt Automotive relays with Fuse for Auto Cars](https://m.media-amazon.com/images/I/51MMNm9AK5L._SL160_.jpg)
- Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact.
- Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.
- 12VDC (14V Max) and 30A High Switching Capability.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Blue - Output N/O (87).
- Set includes 6 relays, 6 relay harnesses, and 6 blade fuses.
- Heavy duty 4-prongs SPST relays, jd1912 12v 40a relay
- Use optional Relay Harness, or female Crimp Connectors
- High 40A coil capacity- able to handle those high current applications with ease
- Package Include: 2 x 40A 4-Pin 12V Vehicle Relays
- The Automotive relay is suitable for normal automobile use and simple to operate, you just need to connect the relay with the wire, no other tools needed, convenient for your use and replace, allowing your components to work properly
![TRUE MODS 6 Pack Bosch Style 5-Pin 12V Relay Kit [Interlocking Harness Socket Holder] [14 AWG Hot Wires] [SPDT] [30/40 Amp] 12 Volt Automotive Relays for Auto Fan Cars](https://m.media-amazon.com/images/I/51nLXwftlpL._SL160_.jpg)
- User Manual available for download under Product Information Details
- Bosch style 12VDC (14V Max) 5-Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability.
- Interlocking design relay socket harness base for easy cable management & organization.
- Heavy duty 14AWG wires for the main contact and pre-wired with 6" pigtail leads.
- Wire Specifications: Black - Ground (85), Red - VDC (30), White - Trigger (86), Yellow - Output N/C (87a), and Blue - Output N/O (87).
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.