910015 – Missing Bearing Races may cause Hub to Overheat – 2019 Grand Design Reflection, Imagine & Transcend Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18V658
Manufacturer Grand Design RV, LLC
Components SUSPENSION
Potential Number of Units Affected 997

 

Missing Bearing Races may cause Hub to Overheat

If the bearings prematurely wear, it can cause the hub to overheat and smoke, increasing the risk of a fire.

 

Summary

Grand Design RV, LLC (Grand Design) is recalling certain 2019 Grand Design Reflection, Imagine and Transcend travel trailers. These axles may be missing inner bearings on the hubs, which can cause the bearing to burnout or cause the hub to overheat.

 

Remedy

Grand Design will notify owners, and dealers will replace the defective hubs with new hubs or replace the axles, free of charge. The recall is expected to begin October 22, 2018. Owners may contact Grand Design customer service at 1-574-825-9679. Grand Design’s number for this recall is 910015.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 61/46 Hubface/Spring Center - (4'0) Frame Width / 4x4 Bolt Pattern
  • EZ Lube Design Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting Grease your axle without pulling off your whole entire hub
  • Internal Wiring System To ensure seamless design Protect brake wires from wear and tear
  • High Strength Straight Steel Axle Tube Construction to ensure Even Tire Wear A better highway experience
  • Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs
Bestseller No. 2
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 61/46 Hubface/Spring Center - (4'0) Frame Width / 5x4.5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 3
Ultra-Tow 2000-lb Capacity Spring Trailer Axle w/Adjustable Spring Mounts
  • Adjustable spring mounts offer a variety of mounting positions
  • Fast Lube spindles allow you to re-grease the bearings without removing the hubs
  • Stainless steel wear sleeves prevent rust from wearing on the rubber oil seal
  • 1.5in. square tube steel axle is hot dip galvanized with adjustable spring centers
  • Can be under or over slung
Bestseller No. 4
Lippert LCI 2000# Straight Idler Trailer Axle 5 on 4.5 Inch Bolt Pattern, Ready to Mount, Underslung, Easy Lube Spindle (60 Hubface 46 Spring Center, 5 on 4.5" Bolt Pattern)
  • Heavy-Duty Construction: Crafted from robust materials and engineered to meet strict quality standards, the Lippert 2000# Idler Axle is built to withstand the rigors of long-haul towing.
  • 2000-Pound Capacity: With a 2000-pound weight rating, this axle provides ample support for a wide range of trailer types, making it suitable for both commercial and recreational use.
  • Smooth and Stable Ride: Equipped with precision-made components, the idler axle ensures a smooth and stable ride, reducing vibration and ensuring your cargo remains secure during transport.
  • Easy Installation: Designed for hassle-free installation, this axle comes with all the necessary hardware and clear instructions, making it accessible for both DIY enthusiasts and professional mechanics.
  • Lippert Quality Assurance: As a trusted name in the industry, Lippert stands behind the quality of its products. The Lippert 2000# Idler Axle is backed by their reputation for excellence and a commitment to customer satisfaction.
Bestseller No. 5
The Trailer Parts Outlet 3500 lb Light Duty Single Trailer Axle Kit with Suspension - Leaf Springs, Hanger & U-Bolt kit (89" Hubface - 74" Spring Center (6'4 Frame), 5x4.5 Bolt Pattern)
  • All-in-One Bundle: This 3.5K LD Single Axle trailer kit includes everything you need for a quick and easy installation, such as a 3.5k Idler Axle, double eye hanger kit, 4-Leaf Double Eye Springs, and 2 1.75k U-Bolt Kits
  • High Strength Construction - The high strength steel axle tube construction ensures a durable and long-lasting performance for small utility trailers, cargo trailers, ATV trailers, and more
  • High-Quality Parts - Made with OEM grade trailer axles and suspension, this kit is packed with high-temp axle grease for reliable performance
  • Low Ride Height - With an underslung design, the axle is welded with spring seats on the bottom, allowing for a lower ride height and improved stability
  • EZ Lube Design - Removable rubber plug allows for easy access to a grease-able zerk fitting, allowing you to grease your axle without having to remove the entire hub
Bestseller No. 6
LCI Lippert 3,500LB Straight Idler Trailer Axle 72HF 58SC
  • 72" from Hubface to Hubface and 58" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
SaleBestseller No. 7
VIRTIONZ Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle -2pack
  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1"
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4"
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair
Bestseller No. 8
Ultra-Tow 2000-Lb. Capacity Spring Trailer Axle with Adjustable Spring Mounts - 71in. Hubface, 55in.-61in. Spring Center, 76in.L, Straight
  • Adjustable spring mounts offer a variety of mounting positions
  • Fast Lube spindles allow you to re-grease the bearings without removing the hubs
  • Stainless steel wear sleeves prevent rust from wearing on the rubber oil seal
  • 1.5in. square tube steel axle is hot dip galvanized with adjustable spring centers
  • Can be under or over slung
Bestseller No. 9
Ultra-Tow 2000-Lb. Capacity Complete Axle Kit - 60in. Hubface, 48in. Spring Center, 5-Stud Pattern, 4.5in. Hubs
  • Durable welded spring seats with double-eye springs for smooth-riding performance
  • Axle tube has hard shell powder-coat finish
  • Axle tube has hard shell powder-coat finish
  • Axle tube has hard shell powder-coat finish
  • Straight axle
Bestseller No. 10
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89/74 Hubface/Spring Center - (6'4) Frame Width / 5x5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers

Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...