| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V588
Manufacturer Navistar, Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 26,288
Fuel Line may Burst if Filter Screen Clogs
If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle’s inability to restart, increasing the risk of a crash.
Summary
Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.
Remedy
Cummins will notify the affected owners. The remedy for this recall is still under development. The recall is expected to begin November 2, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
September 26, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V588-2806.pdf
Loading...
Reload document 
Open in new tab
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Boosts cetane up to 6 numbers – engines run smoother with less power lag and faster cold starts
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Fit type: Universal
- Part number: 3064-06
- 40.6 oz bottle treats 400 gallons - Use at every fill-up
- Formulated to address issues with modern diesel fuels
- Incorporates Archoil's proven combustion modifier technology and a strong cetane boost to increase power and response
- Cleans, lubricates and protects your fuel system (including HPCR systems)
- Increases fuel economy (MPG)
- Cleans Fuel System – Deeply cleans any diesel engine’s fuel system including injectors, cylinders, fuel lines, tank, and tank in one fuel treatment lasting up to 6,000 miles
- Cleans Fuel Injectors – Safely removes and prevents Internal Diesel Injector Deposits (IDIDs), External Diesel Injector Deposits (EDID’s) and other forms of varnish and deposits
- Boosts Cetane – Increases cetane by up to 7 points after the fuel system is fully cleaned, for an even more effective boost in combustion, fuel economy, and engine power while reducing DPF regens
- Increases Mileage – Maximizes your MPG's and helps you save at the pump by improving engine performance and fuel combustion, so you can get the most out of your diesel fuel
- Stabilizes and Prevents Rust, Disperses Moisture – Keeps diesel “healthy” using a military grade non-alcohol-based water dispersant plus rust and corrosion inhibitors
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Removes both internal and external deposits on fuel injectors
- Restores lost power and fuel economy
- Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear caused by poor quality Ultra Low Sulfur Diesel (ULSD) fuel
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Cleans and Lubricates Fuel System: The product contains a blend of detergents and additives that help to clean and lubricate the fuel system, including the fuel injectors, carburetor, and combustion chamber.
- Improves Fuel Economy: The product can help to improve fuel economy by removing deposits and contaminants from the fuel system and improving the efficiency of fuel combustion.
- Reduces Emissions: By improving fuel combustion, the product can also help to reduce exhaust emissions, including harmful pollutants such as carbon monoxide and nitrogen oxides.
- Increases Power and Acceleration: The product can also help to increase power and acceleration by improving the flow of fuel through the system and reducing the buildup of deposits that can impede engine performance.
- Neutralizes Low Sulfur Fuel Problems: Lucas Oil 10013 Fuel Treatment contains a blend of detergents and additives that help to neutralize sulfur and other harmful contaminants that may be present in the fuel system. The detergents work to clean the fuel injectors and carburetor, which can become clogged with sulfur deposits over time.
- Made in the U.S.A. Restores/Increase Horsepower.
- Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%
- Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise
- Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions – reduces Smoke and Particulates
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.