“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V571
Manufacturer Entegra Coach
Components SUSPENSION
Potential Number of Units Affected 36
Leveling System Hoses may Leak and Cause Fire
The leaking hydraulic fluid leak may spray onto the exhaust system, increasing the risk of a fire.
Summary
Entegra Coach (Entegra) is recalling certain 2018 Entegra Odyssey vehicles. The leveling system hydraulic hoses may become damaged due to their location, resulting in a hydraulic fluid leak.
Remedy
Entegra has notified owners, and dealers will inspect the location of hoses and replace any damaged hoses, free of charge. The recall began on September 13, 2018. Owners may contact Entegra customer service at 1-800-517-9137. Entegra’s number for this recall is 9903407.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Hydraulic Hose Routing
Recall: #18V-570 2018-460 Jayco #18V-571 Entegra | Publication Date: September 2018 |
Job Code: 9903407 RC005 – Inspect ONLY no repair necessary .3 hr RC024 – Inspect and relocate hose coil 1 hr RC025 – Replace damaged hose (Authorization required) .5 hr per hose Limit of 3 |
Product Type: Jayco Class A MH and Entegra Class |
REQUIRES PART KIT
INCIDENT | Excess hydraulic hoses for the leveling system are coiled and located in an area that may allow damage to a hose/s ( i.e. kinks, restrictions, scuffed, melted etc.) |
---|---|
AFFECTED UNITS | 2018 Alante J1AP0051-0146, J1AS0051-0157, J1AV0051-0189 2018 Odyssey J1AV8051-8086 |
PARTS KIT 18V-570/571 | 12 – 15” UV mounting hole cable zip ties |
MISC. TOOLS & SUPPLIES | Side knife |
INSPECTION
BEFORE BEGINNING – TURN OFF ENGINE & ALLOW THE ENGINE TO COOL COMPLETELY.
Step 1- Locate the hydraulic hose for the leveling system secured to the underbody, routed along the passengerside frame rail. If there was excess hose during the build process, it will be bundled at a point approximately 3-5 feet forward of the pump box as shown in (Fig 1). After locating the hydraulic hosing, inspect the area where the hose coil is located and/or secured to the frame. If the hydraulic hose is positioned without slack along the frame rail with coil located at reservoir tank (Fig 2 and Fig 3), the hose coil is positioned correctly and no repair is necessary. If the hydraulic hose coil is confirmed to be incorrectly positioned on the frame side rail ( Fig 1), proceed to inspection Step #2.
Example of hydraulic hose incorrectly coiled along chassis rail & above exhaust | Example of hydraulic hose correctly routed along chassis frame rail |
Example of hydraulic hose coil correctly located at hydraulic oil reservoir tank |
Step 2- If the hydraulic hose coil has fallen or is lacking the factory installed zip ties, carefully examine the hoses (3) for any signs of wear or damage. If signs of hose damage are visible, a replacement hose is necessary before proceeding to the repair instructions. If hose is damaged, contact Customer Service for pre-authorization of hose replacement. If no signs of hose damage are visible, proceed to the repair instructions.
REPAIR INSTRUCTIONS
BEFORE STARTING REPAIR- TURN OFF ENGINE & ALLOW THE ENGINE TO COOL COMPLETELY.
Step 1– If the hydraulic hose coil is confirmed to be incorrectly positioned on the frame side rail ( Fig 1), cut the zip tie and correctly re-route the hose coil (Fig 3) to the hydraulic oil reservoir pump tank ( Fig 2). Straighten and secure the hose along frame rail at approx. every 36” section of hose, or as needed, to prevent any slack in hose line ( Fig 4.).
18V-570/571 Hydraulic Hose Routing Sept 2018
Safety Recall: 18V-570 Jayco 2018-460 18V-571 Entegra na September 2018 |
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle (VIN)
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect, which relates to motor vehicle safety exits in certain 2018 Model Year, Atlante 31P (AP), 29S (AS) and 31V (AV) Class A motorhomes and Entegra Odyssey 29V ( AV) Class C motorhomes.
Reason for this recall | There is excess hydraulic hoses for the leveling system coiled and tied to the chassis frame in a manner that may lead to damage to the hoses (i.e. kinks, restrictions, scuffs, melted etc.). A damaged hose may allow localized failure, leading to loss of hydraulic fluid that may contact the exhaust system, which in turn could ignite and cause a fire resulting in personal injury and/or property damage. |
Recall Remedy | An authorized Jayco Dealer will inspect the hydraulic hoses for any sign of damage and replacement as required and/or relocate and tie up the excess hydraulic hoses to the reservoir pump tank to prevent damage. The Recall Remedy is free of charge and will take approximately 1 hour to complete. |
What we need you to do | Please contact an authorized Jayco Dealer as soon as possible to set an appointment for the Recall Remedy. |
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact Customer Service Department at 800-517-9137. If after contacting your dealer and Customer Service you are not able to have the safety defect remedied without charge and/or within a reasonable time, you may wish to submit a written complaint to the Administrator, national Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800424-9153): or go to https://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Jayco Motorized Division
IMPORTANT SAFETY RECALL
Safety Recall: 18V-570 2018-460 Jayco 18V-571 na Entegra September 2018 |
IMPORTANT SAFETY RECALL
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect, which relates to motor vehicle safety exits in certain 2018 Model Year, Atlante 31P (AP), 29S (AS) and 31V (AV) Class A motorhomes and Entegra Odyssey 29V ( AV) Class C motorhomes.
Our records show the following unit is affected by this recall and is currently part of the inventory at your Dealership. The Recall Remedy must be completed on this unit prior to delivery to Consumer.
Serial number
Reason for this recall | There is excess hydraulic hose for the leveling system coiled and tied to the chassis frame in a manner that may lead to damage to the hoses (i.e. kinks, restrictions, scuffs, melted etc.). A damaged hose may allow localized failure, leading to loss of hydraulic fluid that may contact the exhaust system, which in turn could ignite and cause a fire resulting in personal injury and/or property damage. |
Recall Remedy | Inspect the hydraulic hoses for any sign of damage and replacement as required and/or relocate and tie up the excess hydraulic hoses to the reservoir pump tank to prevent damage. |
All pertinent information regarding this recall is available under the Service and Parts Tab of our Website. If you require further assistance, please Contact Jayco Customer Service at 800-517-9137. | |
What we need you to do | Federal Law requires that all units in your inventory be repaired prior to delivery to a customer. If you have sold a unit recently that you have received a stock recall notice on, please contact the owner immediately and advise of the recall, and register the unit by submitting the Warranty Registration Information. |
We certainly regret this inconvenience; however, our Customer’s safety is our most important priority.
Sincerely,
Jayco Motorized
9903407
Sept 2018
https://static.nhtsa.gov/odi/rcl/2018/RCRIT-18V571-4042.pdf
Safety Recall: 18V-570 Jayco 2018-460
18V-571 Entegra na
September 2018
https://static.nhtsa.gov/odi/rcl/2018/RCONL-18V571-5046.pdf
Safety Recall: 18V-570 2018-460 Jayco
18V-571 na Entegra
September 2018
https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V571-0605.pdf
Service / Parts
Recall Order Form
https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V571-9290.pdf
Recall Acknowledgement
September 20, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V571-3050.pdf
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.
- Reduces the operating temperature of hydraulic systems
- Conditions old seals and O-rings to stop and prevent future leaks
- Well suited for use in equipment with wet brakes
- Removes varnish and restores pressure for more efficient operation
- Compatible with both synthetic and conventional hydraulic fluids
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Extended Equipment Life: U1P-Duty ISO 68 AW Hydraulic Oil ensures 7,000 hours of reliable operation with top-tier additives, protecting against oxidation, corrosion, and wear for prolonged machinery life.
- Complete Protection: Its comprehensive additives resist rust, foam, and varnish formation, maintaining smooth operation, preventing filter blockage, and ensuring consistent viscosity over time.
- Versatile Performance: Suitable for high-pressure industrial applications, this fluid remains stable across wide temperature ranges, safeguarding critical components and seals.
- Premium Lubrication: Formulated with quality base stocks and anti-wear additives, it creates a robust film, guarding pumps, pistons, and cylinders from wear, promoting equipment longevity.
- Efficiency and Cleanliness: Its exceptional detergency, water separation, and anti-oxidation properties ensure equipment cleanliness, reducing sludge buildup and optimizing performance.
- Formulated with highly refined group ii base stocks for added resistance to thermal breakdown
- Superior wear protection to protect critical components
- Excellent frictional properties for smooth-shifting, excellent anti-shudder performance
- J20c equivalent, protection against varnish and sludge formation
- Superior thermal stability and oxidation resistance, good seal compatibility
Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.