“This site contains affiliate links for which OEMDTC may be compensated” |
March 8, 2023 NHTSA CAMPAIGN NUMBER: 23V150000
Steering Shaft May Separate from Steering Column
A loss of steering control can increase the risk of a crash.
NHTSA Campaign Number: 23V150
Manufacturer Terex Advance Mixer, Inc.
Components STEERING
Summary
Terex Advance Mixer, Inc. (Terex) is recalling certain 2022-2023 Front Discharge Mixer Commander and Charger vehicles. Improper installation or tightening of the steering shaft may cause it to come loose from the steering column and result in a loss of steering control.
Remedy
Terex will reinstall the steering shaft, free of charge. Owner notification letters were mailed May 22, 2023. Owners may contact Terex customer service at 1-800-678-5961.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to www.nhtsa.gov.
Inspection and Repair Procedure
Parts
Hardware as needed
Tools
Upper Steering shaft Bolt & Nut
Lower Steering Shaft Bolt & Nut
0-75 lb-ft torque wrench
11/16” Wrench and Socket
9/16” Wrench and socket
Repair/Inspection Instructions
1. Secure the vehicle for service.
2. Park the vehicle on a level surface.
3. Place truck in neutral.
4. Apply parking brake.
5. Install wheel chocks.
6. Set torque wrench to 40 lb-ft (54 Nm).
7. Visually check and ensure that the bolt is in the proper groove attaching the steering shaft to the steering column. If aligned properly with groove apply clockwise tightening rotation while securing the nut until properly torqued.
8. If improperly installed remove bolt and properly align new bolt and steering shaft with the groove in the steering column. Apply a clockwise tightening rotation while securing the nut until properly torqued.
9. Set torque wrench to 60 lb-ft (81 Nm).
10. Visually check and ensure that the bolt is in the proper groove attaching the steering shaft to the steering gear. If aligned properly with groove apply clockwise tightening rotation while securing the nut until properly torqued.
11. If improperly installed remove bolt and properly align new bolt and steering shaft with the groove on the steering gear. Apply a clockwise tightening rotation while securing the nut until properly torqued.
12. Remove the wheel chocks.
13. Release the vehicle back to service.
Chronology :
Feb. 16, 2023 – Terex Advance Mixer received a call from a customer stating they lost control of the vehicle.
Feb. 20, 2023 – Terex started an internal investigation to determine root cause of the issue experienced by the vehicle in question, and if that issue might impact a larger population of Terex Advance Mixers. personnel visited the customer location to evaluate the issue.
Mar 3, 2023 – Based on our internal investigation we determined that there could possibly be installation/torque issues associated with the steering shaft. Out of an abundance of caution we determine that a recall is necessary.
Mar 7, 2023 – Terex Advance Mixer filed a 573 Defect Report
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
TEREX ADVANCE | FRONT DISCHARGE MIXER | 2022-2023 |
10 Associated Documents
Recall Acknowledgement
RCAK-23V150-7564.pdf 653.079KB
Defect Notice 573 Report
RCLRPT-23V150-7841.PDF 213.194KB
Remedy Instructions and TSB
RCRIT-23V150-0775.pdf 263.05KB
Recall 573 Report – May 24, 2023
RCLRPT-23V150-8053.PDF 213.494KB
Recall 573 Report – May 16, 2023
RCLRPT-23V150-2185.PDF 213.411KB
ISSUED Owner Notification Letter(Part 577)
RCONL-23V150-3121.pdf 135.155KB
Recall 573 Report – May 23, 2023
RCLRPT-23V150-9397.PDF 213.431KB
Recall Quarterly Report #1, 2023-2
RCLQRT-23V150-2401.PDF 211.357KB
Recall Quarterly Report #2, 2023-3
RCLQRT-23V150-7910.PDF 211.357KB
Recall Quarterly Report #3, 2023-4
RCLQRT-23V150-5909.PDF 211.441KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V150&docType=RCL
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range(ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
- 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
- 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
- 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
- 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
- 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
- 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
- PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
- ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
- HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
- QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
- Meets or Exceeds ASME Specifications
- 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
- 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
- ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
- 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
- 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- Includes 1-pc. 1/4 in. drive micrometer torque wrench (20-200 in.-lb.) with storage case and product manual; 1-pc. 3/8 in. drive micrometer torque wrench (10-80 ft.-lb.) with storage case and product manual; 1-pc. 1/2 in. drive micrometer torque wrench (25-250 ft.-lb.) with storage case and product manual
- Wrenches emit a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet heads drive in both directions and measure torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 【PRECISION】 - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate . Before shipping, we take 200 times calibration tests to make sure all wrenches performance well .
- 【DURABLE】 - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- 【 RELIABLE & SAFE】: When small torque wrench set torque value is reached, the wrench will emits slight click sound to remind you to stop applying force to prevent overtorque damage to your items.
- 【LONG-LASTING】 - Rust & corrosion protection with our unique and newly invented Chrome finish treatment.
- 【 DUAL-DIRECTION MEASURES & WIDE USE】: The paddle of the mini torque wrench head can adjust the direction of use at any time,so that the wrench can be used both clockwise and counterclockwise directions. More widely used for Installation equipment, Electrical engineering, bicycle/motorcycle maintenance, Product assembly.With a storage box and an instruction manual.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Inspection and Repair Procedure
Parts
• Hardware as needed
Tools
Upper Steering shaft Bolt & Nut
11/16” Wrench and Socket
Lower Steering Shaft Bolt & Nut
9/16” Wrench and socket
0-75 lb-ft torque wrench
Repair/Inspection Instructions
1. Secure the vehicle for service.
2. Park the vehicle on a level surface.
3. Place truck in neutral.
4. Apply parking brake.
5. Install wheel chocks.
6. Set torque wrench to 40 lb-ft (54 Nm).
7. Visually check and ensure that the bolt is in the proper groove attaching the steering shaft to the steering column. If aligned properly with groove apply clockwise tightening rotation while securing the nut until properly torqued.
8. If improperly installed remove bolt and properly align new bolt and steering shaft with the groove in the steering column. Apply a clockwise tightening rotation while securing the nut until properly torqued.
9. Set torque wrench to 60 lb-ft (81 Nm).
10. Visually check and ensure that the bolt is in the proper groove attaching the steering shaft to the steering gear. If aligned properly with groove apply clockwise tightening rotation while securing the nut until properly torqued.
11. If improperly installed remove bolt and properly align new bolt and steering shaft with the groove on the steering gear. Apply a clockwise tightening rotation while securing the nut until properly torqued.
12. Remove the wheel chocks.
13. Release the vehicle back to service.
Align bolt with groove
Align bolt with groove
Align with groove
Align with groove
**************************************************************************************************************
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
Terex Advance
IMPORTANT SAFETY
RECALL
SN 23V-150
Date: Draft
Customer Name
Customer Address
Customer City, State & Zip Code
Model Affected: Commander & Charger
Subject: Improperly installed/torqued steering shaft
This notice applies to your vehicle, [VIN].
This notice is sent to you in accordance with the National Traffic and Motor Vehicle
Safety Act.
ISSUE:
Terex Advance has decided that a defect, which relates to motor vehicle safety, exists
in certain 2022-2023 Front Discharge Mixer Commander and Charger trucks built
between October 3, 2022, and February 28, 2023. The steering shaft may have an improperly
installed/torqued steering shaft where it connects to the steering column.
This condition could cause a loss of steering control which may result in a loss of
vehicle control, increasing the risk of a crash.
Action:
What the Owner Must Do:
You are receiving this Notice because you have a truck that has been identified as falling within
the suspect series. As the owner, you must immediately inspect the equipment and correct if
required:
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
• Immediately inspect for the suspect condition, using the inspection guide contained in
this Notice.
• If suspect condition is found, immediately remove from service until the instructed repair
is completed.
• If the fasteners are found improperly installed or torqued, immediately conduct the
repairs outlined in this Notice.
• If suspect condition is not found or once the equipment has been repaired, continue to
follow the inspection and maintenance instructions as specified in the manuals.
WHAT TEREX WILL DO:
Terex Advance will provide the inspection instructions required to determine if your vehicle(s) is
impacted by this issue. The inspection instructions are contained in this Notice.
Please inspect and arrange any necessary repairs as soon as possible after the receipt of
replacement parts.
After contacting Terex Advance, if you are still not able to have the safety defect remedied,
without charge and within a reasonable time, you may wish to write the: Administrator, National
Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington DC, or call 1-
888-327-4236 (TTY: 1-800-424-9153): or go to http://www.safecar.gov.
If you have had your unit repaired for this issue prior to the receipt of this notice, you may be
eligible for reimbursement. For more information, please contact Terex Advance at the above
contact information.
If you no longer own this machine, please contact Terex Advance at the above contact
information in order to help ensure the new owner receives this important safety information.
If you have leased this equipment to another person, you are required by Federal Law to
forward a copy of this notice to the lessee by first-class mail within ten days of your receipt of
this notice.
Thank you for your immediate attention on this important matter.
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
Customer Name Date
Customer Address
Customer City, State & Zip Code
IMPORTANT SAFETY RECALL 23V-150
This notice applies to your vehicle(s)
Dear Terex Advance Owner,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor
Vehicle Safety Act.
REASON FOR NOTICE:
Terex Advance has decided that a defect, which relates to motor vehicle safety, exists
in certain 2022-2023 Front Discharge Mixer Commander and Charger trucks built
between October 3, 2022, and February 28, 2023. The steering shaft may have an improperly
installed/torqued steering shaft where it connects to the steering column.
The result of this condition is a loss of steering control and loss of vehicle control.
This condition presents a safety hazard. This loss of steering will result in loss of vehicle control
and potential property damage and an increased risk of crash.
WHAT TEREX WILL DO:
Terex will provide the inspection instructions required to determine if your vehicle(s) is impacted
by this issue. The inspection and repair instructions are contained in this Notice.
WHAT THE OWNER MUST DO:
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
If you have a truck that has been identified as falling within the suspect series, you are receiving
this notification. Terex Advance Mixer is requiring that you take the following immediate action:
• Immediately inspect for the suspect condition, using the inspection guide contained in
this Notice.
• If suspect condition is found immediately remove unit from service until repaired.
• If the fasteners are found improperly installed or torqued, immediately conduct the
repairs outlined in this Notice.
• If suspect condition is not found or once the equipment has been repaired, continue to
follow the inspection and maintenance instructions as specified in the manuals.
Please inspect and arrange any necessary repairs as soon as possible after the receipt of
replacement parts.
After contacting Terex Advance, if you are still not able to have the safety defect remedied,
without charge and within a reasonable time, you may wish to write the: Administrator, National
Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington DC, or call 1-
888-327-4236 (TTY: 1-800-424-9153): or go to http://www.safecar.gov.
If you have had your unit repaired for this issue prior to the receipt of this notice, you may be
eligible for reimbursement. For more information, please contact Terex Advance at the above
contact information.
If you no longer own this machine, please contact Terex Advance at the above contact
information in order to help ensure the new owner receives this important safety information.
If you have leased this equipment to another person, you are required by Federal Law to
forward a copy of this notice to the lessee by first-class mail within ten days of your receipt of
this notice.
Thank you for your immediate attention on this important matter.
Our records indicate the following machines registered to you, are involved in Safety Notice
23V-150
Model Vehicle Identification Number
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
Model List VIN Numbers
Inspection and Repair Procedure
Parts
• Hardware as needed
Tools
Upper Steering shaft Bolt & Nut 11/16” Wrench and Socket
Lower Steering Shaft Bolt & Nut 9/16” Wrench and socket
0-75 lb-ft torque wrench
Repair/Inspection Instructions
1. Secure the vehicle for service.
2. Park the vehicle on a level surface.
3. Place truck in neutral.
4. Apply parking brake.
5. Install wheel chocks.
6. Set torque wrench to 40 lb-ft (54 Nm).
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
7. Visually check and ensure that the bolt is in the proper groove attaching the steering
shaft to the steering column. If aligned properly with groove apply clockwise tightening
rotation while securing the nut until properly torqued.
8. If improperly installed remove bolt and properly align new bolt and steering shaft with the
groove in the steering column. Apply a clockwise tightening rotation while securing the
nut until properly torqued.
9. Set torque wrench to 60 lb-ft (81 Nm).
10. Visually check and ensure that the bolt is in the proper groove attaching the steering
shaft to the steering gear. If aligned properly with groove apply clockwise tightening
rotation while securing the nut until properly torqued.
11. If improperly installed remove bolt and properly align new bolt and steering shaft with the
groove on the steering gear. Apply a clockwise tightening rotation while securing the nut
until properly torqued.
12. Remove the wheel chocks.
Align bolt with groove
Align bolt with groove
Align with groove
Align with groove
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
13. Release the vehicle back to service.
Terex Advance ⚫ 7727 Freedom Way ⚫ Fort Wayne, IN 46818
800-433-6691
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-150
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAY 23, 2023 NHTSA Recall No. : 23V-150 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 271 Estimated percentage with defect : 5 %
Vehicle Information :
Vehicle 1 : 2022-2023 Front Discharge Mixer Commander & Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Terex Advance Mixer received a call from a customer stating they had lost steering control. After investigation it was determined that the steering shaft had come loose from the steering column and resulted in a loss of steering.
There were no injuries or property damage as a result of this event. Production Dates : OCT 03, 2022 – FEB 28, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Vehicles within the subject population may be affected by the improper installation/torquing of the steering shaft to the steering column.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of steering control may result in loss of vehicle control and property damage and an increased risk of a crash.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-150 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
Feb. 16, 2023 – Terex Advance Mixer received a call from a customer stating they lost control of the vehicle. Feb. 20, 2023 – Terex started an internal investigation to determine root cause of the issue experienced by the vehicle in question, and if that issue might impact a larger population of Terex Advance Mixers. personnel visited the customer location to evaluate the issue. Mar 3, 2023 – Based on our internal investigation we determined that there could possibly be installation/ torque issues associated with the steering shaft. Out of an abundance of caution we determine that a recall is necessary. Mar 7, 2023 – Terex Advance Mixer filed a 573 Defect Report Description of Remedy :
Description of Remedy Program : All customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. If it is parts and any labor costs associated with the remedy of the condition will be reimbursed to the customer How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. The parts just need to be properly installed. Process engineering got with the department involved and provided awareness training on the proper procedure for steering shaft installation. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-150
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 22, 2023 –
MAY 23, 2023
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-150
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAY 24, 2023 NHTSA Recall No. : 23V-150 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 271 Estimated percentage with defect : 5 %
Vehicle Information :
Vehicle 1 : 2022-2023 Front Discharge Mixer Commander & Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Terex Advance Mixer received a call from a customer stating they had lost steering control. After investigation it was determined that the steering shaft had come loose from the steering column and resulted in a loss of steering.
There were no injuries or property damage as a result of this event. Production Dates : OCT 03, 2022 – FEB 28, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Vehicles within the subject population may be affected by the improper installation/torquing of the steering shaft to the steering column.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of steering control may result in loss of vehicle control and property damage and an increased risk of a crash.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-150 Page 2 Component Name 1 : DRIVESHAFT,STEERING,MY13DRIVESHAFT,STEERING,MY13
Component Description : DRIVESHAFT,STEERING,MY13 Component Part Number : 33508 Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
Feb. 16, 2023 – Terex Advance Mixer received a call from a customer stating they lost control of the vehicle. Feb. 20, 2023 – Terex started an internal investigation to determine root cause of the issue experienced by the vehicle in question, and if that issue might impact a larger population of Terex Advance Mixers. personnel visited the customer location to evaluate the issue. Mar 3, 2023 – Based on our internal investigation we determined that there could possibly be installation/ torque issues associated with the steering shaft. Out of an abundance of caution we determine that a recall is necessary. Mar 7, 2023 – Terex Advance Mixer filed a 573 Defect Report Description of Remedy :
Description of Remedy Program : All customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. If it is parts and any labor costs associated with the remedy of the condition will be reimbursed to the customer How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. The parts just need to be properly installed. Process engineering got with the department involved and provided awareness training on the proper procedure for steering shaft installation. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-150
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : No Dealer network so no dealer notification letter.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 22, 2023 – MAY 23, 2023
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-150
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAR 07, 2023 NHTSA Recall No. : 23V-150 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : NR Estimated percentage with defect : NR
Vehicle Information :
Vehicle 1 : 2022-2023 Front Discharge Mixer Commander & Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Terex Advance Mixer received a call from a customer stating they had lost steering control. After investigation it was determined that the steering shaft had come loose from the steering column and resulted in a loss of steering.
There were no injuries or property damage as a result of this event. Production Dates : NOV 01, 2022 – FEB 28, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Vehicles within the subject population may be affected by the improper installation/torquing of the steering shaft to the steering column.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of steering control may result in loss of vehicle control and property damage and an increased risk of a crash.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-150 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
Feb. 16, 2023 – Terex Advance Mixer received a call from a customer stating they lost control of the vehicle. Feb. 20, 2023 – Terex started an internal investigation to determine root cause of the issue experienced by the vehicle in question, and if that issue might impact a larger population of Terex Advance Mixers. personnel visited the customer location to evaluate the issue. Mar 3, 2023 – Based on our internal investigation we determined that there could possibly be installation/ torque issues associated with the steering shaft. Out of an abundance of caution we determine that a recall is necessary. Mar 7, 2023 – Terex Advance Mixer filed a 573 Defect Report Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : Recall Schedule : Description of Recall Schedule : NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-150
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573 Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-150
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAY 16, 2023 NHTSA Recall No. : 23V-150 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 271 Estimated percentage with defect : 5 %
Vehicle Information :
Vehicle 1 : 2022-2023 Front Discharge Mixer Commander & Charger Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Terex Advance Mixer received a call from a customer stating they had lost steering control. After investigation it was determined that the steering shaft had come loose from the steering column and resulted in a loss of steering.
There were no injuries or property damage as a result of this event. Production Dates : OCT 03, 2022 – FEB 28, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Vehicles within the subject population may be affected by the improper installation/torquing of the steering shaft to the steering column.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of steering control may result in loss of vehicle control and property damage and an increased risk of a crash.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-150 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : NR Address : NR
NR
Country : NR Chronology :
Feb. 16, 2023 – Terex Advance Mixer received a call from a customer stating they lost control of the vehicle. Feb. 20, 2023 – Terex started an internal investigation to determine root cause of the issue experienced by the vehicle in question, and if that issue might impact a larger population of Terex Advance Mixers. personnel visited the customer location to evaluate the issue. Mar 3, 2023 – Based on our internal investigation we determined that there could possibly be installation/ torque issues associated with the steering shaft. Out of an abundance of caution we determine that a recall is necessary. Mar 7, 2023 – Terex Advance Mixer filed a 573 Defect Report Description of Remedy :
Description of Remedy Program : All customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. If it is parts and any labor costs associated with the remedy of the condition will be reimbursed to the customer How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. The parts just need to be properly installed. Process engineering got with the department involved and provided awareness training on the proper procedure for steering shaft installation. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-150
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
SEOCONTENT-END