22-096-VUC – Loose Connection of Power Cable – 2013-2022 Micro Bird G5, 2015-2019 T-Series, & 2012-2015 MBII Transit Buses

September 23, 2022 NHTSA CAMPAIGN NUMBER: 22V714000

Loose Connection of Power Cable

A loose power cable connection may cause the control board to overheat and melt, increasing the risk of a fire.


NHTSA Campaign Number: 22V714

Manufacturer Corp. Micro Bird, Inc.


Potential Number of Units Affected 45



Corp. Micro Bird, Inc. (Micro Bird) is recalling certain 2013-2022 G5, 2015-2019 T-Series, and 2012-2015 MBII transit buses. The power cable that provides electricity to the air conditioning control board may have a loose connection to the power stud on the board.



Dealers will repair the defect, free of charge. Owner notification letters are expected to be mailed on November 14, 2022. Owners may contact Micro Bird’s customer service at 1-819-477-2012. Micro Bird’s number for this recall is 22-096-VUC.



Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.


Chronology :

Following reports in October 2021 regarding localized heat damages to the air conditioning control board and fire event in two (2) vehicles, an investigation was launched to determine the source of the incidents. Other reports were also received on June 16, August 19, and September 15, 2022

It was determined, from the location of the damage on the board that the power cable connection to the power stud was implicated. Following the incidents reported in August and September 2022, it was determined that the connection between the power cable and the power stud becoming loose was probably the cause of the damages and fire incidents.

It was decided on September 16, to recall the vehicles equipped with a Valeo air conditioning system installed in the front and rear cap or mounted on the ceiling, for which the power cable was either connected or reconnected to the power stud during vehicle manufacture.

Micro Bird has not received any other report of incident or claim regarding this defect.


19 Affected Products


MICRO BIRD G5 2013-2022
MICRO BIRD MB II 2012-2015


2 Associated Documents

Recall Acknowledgement

RCAK-22V714-8007.pdf 646.091KB



Defect Notice 573 Report

RCLRPT-22V714-8107.PDF 242.574KB



Latest Recalls Documents




Bestseller No. 1
Cartman 4AWG 18-Inch Battery Inverter Cables Set, 4Gauge x 18" (1 Black & 1 Red)
  • 4 AWG wire, fits 3/8" stud, SAE 4 GAUGE COPPER
  • Zinc plated 95% copper lugs for superior corrosion and oxidation resistance
  • Better stamping process to improve the current and reduce the resistance.
  • Boat cable wire stays ultra flexible even in the most extreme conditions
  • Heat-resistant up to 105C
Bestseller No. 2
Energizer Jumper Cables for Car Battery, Heavy Duty Automotive Booster Cables for Jump Starting Dead or Weak Batteries with Carrying Bag Included (16-Feet (6-Gauge)
  • ENERGIZER 16 FEET JUMPER CABLES - 6 Gauge, 16 FT booster battery jumper cables for jump starting a dead or weak battery. Ideal for trucks, SUVs, full-size cars, mid-size cars and small/compact cars
  • THICK VINYL COATING - Includes a strong spring and a comfortable handle for secure placement and easy positioning. Safety featured of shelled vinyl coated clamp for rust and corrosion protection.
  • CARRYING CASE INCLUDED - Our Energizer jumper cables come with a high-grade travel bag for easy transport and compact storage.
  • TANGLE FREE CCA BOOSTER CABLES - 16 Foot length makes it easy to reach from one car battery to another. Copper clad aluminum cables remains flexible even at -40°C.
  • THE BRAND NAME YOU CAN TRUST - 2 Years Warranty! We are here to power your car battery and truck with our booster jumper cables. We keep you going and going!
Bestseller No. 3
LotFancy 6 AWG 20 Inches (Each) Battery Cables Set with Terminals, 3/8-Inch Lugs (Positive and Negative) for Motorcycle, Automotive, Marine, Solar, ATV, RV, Mower, Oxygen-Free
  • 【2 CABLES】This 6awg 20 inches battery cables contain one positive (Red) and one negative (Black) power inverter cables. 3/8” ring at each end. The Maximum operating current is 59.9A
  • 【UL LISTED】Our cables are UL listed. UL testing makes sure that wire sizes are correct or devices can handle the amount of current they claim to be able to. They also ensure that products are constructed correctly for the highest safety
  • 【TINNED COPPER】Tin-plated copper has good stability, wear resistance, corrosion resistance, which improves the oxidation resistance of copper and maintains its conductivity better
  • 【PVC INSULATED JACKET】Flexible PVC insulation of battery cables resists abrasion, waterproof and moisture proof, flame retardant and heat insulation, and withstands the rigors of an automotive or marine environment
  • 【WIDE APPLICATION】The 6 gauge positive and negative cables are ideal for car automotive, solar, marine, RV, motorcycle, golf cart, lawn/garden equipment or power inverter batteries
Bestseller No. 4
4 AWG Battery Cables,Gauge Power Inverter Cables with 5/16" Ring Terminals for Solar,RV,Auto,Marine Car,Boat (Length 3 ft)
  • Copper cables for maximum power transfer. The Maximum operating current is 95A.Each cable has 2 pcs 5/16" round center hole terminals (already crimped) on both ends.
  • Used for car, vehicle, RV, solar application, boat, and more,Solar panel, battery to inverter, also used for electrical equipment.
  • Cable is SAE J1127 compliant and rated for up to 750 volts from -50°C to +105°C.Pure copper cable lugs are tinned coated and utilize a closed end design for corrosion protection.
  • Polyolefin heat shrink tubing applied to form a protective seal.
  • Delivery from the United States, fast logistics, guaranteed after-sales!
Bestseller No. 5
2PCS Battery Terminal Connectors, 4 Way Quick Release Disconnect Battery Terminals, Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG (Copper)
  • 【4 WAY BATTERY TERMINAL】There are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. The purpose of the design is for multiple cable connections.
  • 【EXCELLENT QUALITY】With superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss.
  • 【EASY TO IDENTIFY】With the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify. And the battery terminal works great for replacing worn out and corroded terminals. Tip: Make sure to choose the correct terminal for the correct polarity.
  • 【PACKAGE INCLUDE】You will receive 2PCS battery terminal connectors(positive and negative), 2PCS anti-corrosion fiber washers and an allen wrench.
  • 【WIDE APPLICATION】The battery terminal connectors can be used for Trailer, Winch, Truck, Tractor, Jeep, RV, Cars, Vans, Caravan, Boat, etc.
Bestseller No. 6
2 AWG Gauge Red + Black Pure Copper Battery Inverter Cables Solar, RV, Car, Boat 12 in 5/16 in Lugs
  • Manufactured with ultra-flexible WindyNation Power-Flex Cable
  • 100% fine stranded PURE COPPER cable for high amperage applications
  • Copper cable lugs are tinned coated and utilize a closed end design for corrosion protection
  • Polyolefin heat shrink tubing applied to form a protective seal.
  • Includes one black cable and one red cable. Simply select cable length and cable lug mounting hole diameter for cable ends.
SaleBestseller No. 7
150pcs Battery Cable Ends, Copper Wire Lugs Assortment Kit AWG 2 4 6 8 10 Gauge - 70Pcs Battery Cable Lugs Ring Wire Terminal Connectors and 80Pcs Heat Shrink Tubing Kit for Marine Electrical Supplies
  • [PREMIUM QUALITY] Heavy-duty battery cable ends are made of good conductive, heat and corrosion resistant purple copper to ensure the reliability of the connection. Surface pickling mitigates oxidation. Standard lugs opening facilitates wire insertion. The inspection window is designed to check the correct and complete cable insertion. Each wire lugs has a specification mark, so you can quickly find the right terminal. Copper wire lugs can be easily and safely crimped or soldered to the cable.
  • [EASY INSTALL] Battery lugs are used in conjunction with heat shrink for power draw or grounding, making wiring safe, reliable and work professionally. Flame retardant and insulated heat shrink is made of polyolefin, which is pre-cutting into common sizes for selection to improve working efficiency. Crimp or solder cable into copper wire lugs, insert heat shrink, apply to heat. It will shrink quickly and wrap cable well. Red and black color make us quickly identify positive and negative cables.
  • [COPPER LUGS KIT] For electrical, various sizes of wire lugs are needed to carry sufficient amperage between components. 150pcs wire connectors kit has a assortment of terminals for you to freely choose, Including 10 types of 70PCS of AWG 2 4 6 8 10 copper wire lugs, 3 sizes of 80PCS of heat shrink tubing. SC Ring Terminal set can help you connect tightly to the cable more easily and safely. Please note that when crimping, make sure to choose copper wire that matches wire connectors diameter.
  • [WIDE APPLICATION] Battery cable ends are connector from wire cable to electrical equipment that serves to stabilize the installation and prevent short circuits and poor contact effectively. It is suitable for emergent cable repairing. We recommend this wire lugs kit for terminal wiring of professional equipment, such as distribution boxes, batteries, cables, etc. It can also be used for audio, motorcycles, automotive, marine, household appliances, toys, solar, etc.
  • [PORTABLE, WELL ORGANIZED] Battery cable lugs set is handy to carry around. They are neatly separated and protected in a storage box. You don't have to worry about mixing up. We recommend you check wire lugs size to ensure proper fit before use. This copper wire lugs kit is more effective for electrical work when used with a good crimping tool or soldering gun. If you have any questions about our battery cable ends, please contact us immediately and we will give you a satisfactory solution.
Bestseller No. 8
2 AWG Gauge Red + Black Pure Copper Battery Inverter Cables Solar, RV, Car, Boat 12 in 5/16 in Lugs
  • Package includes: 12-inch 2 AWG battery inverter car battery cable contains a set of positive (red) and negative (black) battery cables.There is a 5/16” ring on each end.
  • Material: Pure oxygen-free copper wiring for maximum conductivity. Copper terminals are tin-plated to minimize corrosion, and the oxygen-free copper wiring is a 105 degree flame-retardant outer skin.
  • Application: 6 gauge inverter cables are often used for power application in automotive, truck, solar, RV, trailer, golf car, motorcycle, mower, etc.
  • Protective cover: PVC insulating sheath, flexible PVC insulation of battery cable, wear-resistant, waterproof, moisture-proof, flame-retardant and heat-insulating, can withstand the harsh test of the car or marine environment, please rest assured to buy.
  • Warranty: This Battery Cables will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love Bestway products.
Bestseller No. 9
EDECOA Battery Cables 3 AWG 1m Pure Copper Inverter Cables for Car, Power Inverter, RV, Boat
  • EDECOA QUALITY: Ultra-flexible cables are manufatured with 100% PURE copper. It is ideal for connecting the power inverter to batteries
  • EASY TO INSTALL: Equipped with a quick release labor-saving battery terminal connectors
  • COMPATIBILITY: The cables are suitbale for 1000W or 1500W power inverter
  • INCLUDE: one 3AWG 1 meter red cable + one 3AWG 1 meter black cables, 1 Pair quick release battery teminal connectors
SaleBestseller No. 10
VonSom 2 Foot 4 AWG Power Battery Cable Four Gauge Wire with 3/8" Ring Terminals for Car RV Solar ATV Lawn Mower Motorcycle, Black + Red 2 Pcs Set
  • 4 AWG Gauge Battery Cable: Included one positive (Red) and one negative (Black) cable, 2 foot length for each cable, fit 3/8'' stud. black + red 2 pcs set
  • Copper battery cables are available with pre-attached cable lugs with 3/8" diameter mounting holes. Jacket and insulation are resistant to oil, gas, salt water, battery acid, heat, abrasion and sunlight.
  • Oxyten free copper (OFC) conductors ensure maximum performance, Rated 600 Volts Max with 105C Dry and 75C Wet temperature ratings and will remain flexible in extreme cold weather.
  • Polyolefin heat shrink tubing is applied at the cable lug attachment point to form a protective seal, good for prevent corrosion and heat insulation.
  • VonSom power inverter cables are excellent for battery bank wiring, inverter cables, grounding cables, RV car marine boat wiring applications, golf cart wiring etc.

Last update on 2022-11-17 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.


Leave a Comment

Share to...