Loss of Stability Control Function – 2017-2018 BraunAbility Dodge Companion Vans

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18V489
Manufacturer Braun Corporation
Components SERVICE BRAKES, HYDRAULIC, ELECTRONIC STABILITY CONTROL
Potential Number of Units Affected 165

 

Loss of Stability Control Function

A reduction of ESC function can increase the risk of a crash.

 

Summary

Braun Corporation (Braun) is recalling certain 2017-2018 BraunAbility Dodge Companion Vans built on Dodge RT minivan chassis. The brake lines may not be connected to the corresponding ports on the hydraulic control unit, causing reduced performance of the Electronic Stability Control (ESC) system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 135, “Light Vehicle Brake Systems,” and 126, “Electronic Stability Control Systems.”

 

Remedy

Braun will notify owners, and dealers will reroute the right rear brake line to the left wheel, and install a brake line extension to reroute the left rear brake line to the right rear wheel. This repair will be completed free of charge. The recall is expected to begin in August 2018. Owners may contact Braun customer service at 1-800-488-0359.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


Recall Acknowledgement

August 16, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V489-6012.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.07 KB]

 


 

Bestseller No. 1
Prestone AS401 DOT 3 Synthetic Brake Fluid - 32 oz.
  • Provides an extra margin of safety in extreme braking conditions
  • Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
  • Excellent for ABS, disc and drum brake systems
  • Delivers braking power when needed by avoiding a spongy pedal
  • Both wet and dry boiling points exceed the minimum government standards
Bestseller No. 2
LUCAS OIL 10826 Brake Fluid - 1 Quart
  • High quality blend of polyethylene glycol ethers and additives
  • Compatible with all brake system rubber components and other brake fluids
  • Prevents seal hardening or softening
  • Protects against rust and corrosion
  • Provides excellent lubricity
Bestseller No. 3
BOSCH ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1) - 1 Quart
  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
  • Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
Bestseller No. 4
ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz
  • Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
  • High boiling point to minimize brake fluid boiling and vapor lock
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
Bestseller No. 5
Quicksilver 8M0128415 DOT 4 Brake Fluid – 12 Ounce
  • The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
  • Provides corrosion protection in brake components
  • Matches needs of all DOT 4 manufacturer recommendations
  • Compatible with all DOT 3 and DOT 4 applications
Bestseller No. 6
Johnsen's 2234 Premium DOT-3 Brake Fluid - 1 Gallon
  • Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
  • Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
  • Mixes with all DOT 3 approved brake fluids
  • Designed for use in disc, drum and ABS brake systems
SaleBestseller No. 7
Johnsen's 5034 Premium Synthetic DOT-4 Brake Fluid - 1 Gallon
  • Synthetic quality brake fluid
  • Contains special ingredients to guard against vapor lock and moisture absorption
  • Exceeds requirements for both DOT 3 and DOT 4 brake fluids
  • Specially formulated for DOT 4 brake fluid applications
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 8
STP Heavy Duty Brake Fluid, Dot 3 Brake Fluid Protects Brake Systems, ABS, Disc and Drum Systems, 12 Oz, STP
  • Helps provide protection against brake failure from vapor lock
  • Helps prevent corrosion in brake system
  • Works with all brake system requiring DOT 3 fluids
  • Exceeds federal motor vehicle safety standard No. 116
  • Meets SAE spec. J1703.
Bestseller No. 9
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
  • Minimal decrease of boiling point due to excellent water locking properties
  • Non-foaming when filling and bleeding the brake system
  • Excellent corrosion protection due to selected additives
  • High safety tolerance against steam bubbles
  • Makes brake fluid changing intervals of up to 3 years possible
Bestseller No. 10
Wagner DOT 3 21B Brake Fluid, 32 oz; 946 ml
  • Maintains proper movement for safe, effective stopping performance
  • Helps deliver a quieter braking system
  • Produces smoother pedal travel
  • Provides longer brake life and performance
  • Install Wagner with total confidence

Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...