August 8, 2022 NHTSA CAMPAIGN NUMBER: 22V599000
An unexpected engine shut down can increase the risk of a crash. Additionally, a disabled school bus may require an evacuation procedure in an uncontrolled traffic situation, increasing the risk of injury to passengers.
NHTSA Campaign Number: 22V599
Manufacturer Shyft Group
Potential Number of Units Affected 38
Shyft Group is recalling certain 2023 Spartan RV Chassis K2 vehicles. The engine control module (ECM) may experience an internal short-circuit, which can result in an unexpected engine shut down without the ability to restart the vehicle.
The remedy is currently under development. Owner notification letters are expected to be mailed in August 2022. Owners may contact Shyft Group’s customer service at 1-800-582-3454. Shyft Group’s number for this recall is 22-05.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
On August 4, 2022, Cummins notified Shyft of recall 22E-063 and provided Engine Serial Numbers (ESNs) of the affected engines. Shyft traced the ESN’s to Vehicle Identification Numbers (VINs) to identify the affected motor home chassis. On August 5, 2022 a Stop Ship was put into place for chassis still in Shyft’s position. That same day, Shyft determine a defect relating to motor vehicle safety could exist in the affected motorhome chassis.
1 Affected Product
2 Associated Documents
Defect Notice 573 ReportRCLRPT-22V599-9605
Latest Recalls Documents
- NL102PLUS HEAVY DUTY diagnostic scanner from NEXAS supports all heavy duty trucks in compliance with standard protocols (
J1587，J1939 and J1708 Class 4- class 8 trucks). And also engine check diagnostic for all passenger cars & light duty vehicles from 1996 on.
- Trucks appliance: for Cummings, for Detroit, for Maxxforce, for Caterpillar, for Freightliner, for International, for Kenworth, for John Deere, for Peterbilt, for Sterling, for Mack, for Paccar, for Westernstar, for Volvo, for Scania, for Man, for Renault, for ERF, for Foden, for Seddon-Atkinson, for Iveco, for DAF, for SISU, for STEYR, for ISUZU; and all Cars/ mini truck/ light duty from 1996.
- DPF Regeneration And Oil Service Reset:
Force DPF regen for Cummings, Detroit, Maxxforce, ISUZU, and HINO from 2010 till now . Oil service reset for Cummings, Detroit, Maxxforce from 2010 till now .(Note: Water Temperature is higher than 80 Degree and engine at idle speed for at least 10 minutes.)
- Supported Truck Systems: engine, transmission, instrument panel, drivetrain, braking system, suspension, ABS, ESP, EPS, fuel system and more, which are in compliance with
J1939, J1708 and J1587 protocols. Generally for American HD trucks ( Class4-Class8) are from 2006 on.
- FREE UPDATE & EXCELLENT SERVICE----2.8 inch TFT color screen design and user friendly software interface guide you to operate it as easy as pie.We provide one year warranty & lifetime free software online update and professional service team for your any questions within 24 hours.
- 🚛【PROFESSIONAL DPF REGEN TOOL】Diesel particles would make lots of problems for trucks, with the OEM-LEVEL DPF regeneration function, F801 can solve all particle problems for truck owners, including DPF regeneration, DPF reset, DPF related information reset, DPR state reset, forced DPR regeneration, differential pressure check, DPD forced regeneration, etc. Please note: The DPF regen function only supports Volvo, International, and Mack trucks.
- 🚛【WIDE TRUCK COMPATIBILITY】F801 heavy duty commercial truck scan tool supports all major truck models which comply with standard OBD protocols, including SAE J1939, SAE J1708, SAE J1850 PWM, SAE J1850 VPW, ISO 14230-4, ISO 9141-2, ISO 15765-4 and ISO 27145-4. F801 also creates separate diagnostic menus for Volvo, International, Mack, Freightliner, Peterbilt, Kenworth, and Western Star trucks to provide OEM-LEVEL diagnostic.
- 🚛【OE-LEVEL FULL SYSTEM DIAGNOSTIC】FCAR F801 commercial truck scanner supports all system diagnostics for diesel trucks that are in compliance with standard HD OBD protocols. Including Engine, ABS, Transmission, Body Controller, Instrument Cluster, Brakes, Exhaust Emission Controller, Communication Unit, DPF Controller, Aftertreatment, SART Module, etc. It can read and clear error codes after repairing the truck fault, show graphical live data, read ECU Information and read Freeze Frame.
- 🚛【2 in 1 OBD & OBD2 FUNCTION】With 6PIN/9PIN and 16PIN adapters, F801 has full OBD＆OBD functions, including reading and clearing error codes, showing graphical Live Data, Freeze Frame, and vehicle information for 24V Diesel OBD and heavy trucks 12V cars. With this truck scan tool, you can find your truck problem easily and do some repairs by yourself, saving much time and money.
- 🚛【LIFETIME FREE UPDATE】FCAR F801 truck scanner can get the latest version at any time with free update via WIFI. There are also some advanced functions, such as one-click screenshot, one-click printing, one-click feedback, one-click sharing report and so on. Bring a more convenient and comfortable experience for you.
- COMPATIBLE WITH all heavy duty trucks in compliance with standard protocols (J1587, J1939 and J1708).
- BEST IN CLASS INNOVATION- iCarsoft HD V3.0 can do it all-reads and clears trouble codes on most systems such as engine, transmission, ABS and airbag etc. Supports OBDII/EOBD, with Ten Modes of Operation, read live data, full ECU diagnosis etc.It automatically detects your car model and scans all modules for error codes. This special technology allows for specific diagnostic functions and testing!
- DYNAMIC TEST CAPABILITIES- The Multi-lingual function allows you to view & graph live data in color while graphing at a blazing fast refresh rates for quicker results. Our OBD2 scanner allows you to read pending DTCs and permanent DTCs with a DTC Library to lookup while operating the tool. Providing you with accurate data results for all your error codes
- DIAGNOSTIC FUNCTIONS & ADVANCED FEATURES- Along with the standard OBD functionscalibrate,Headlamp adjustment,Freeze Frame, O2 Sensor Test, and Evap System Test are just a few of the special functions this professional quality car scanner provides
- TRY IT RISK FREE- Whether you’re your own personal auto mechanic or you’re a business owner, you’ll fall in love with our compact design of this diagnostic scanner. Its pocket-size and perfect for allowing diagnostic tests inside or outside of the car. No batteries required just plug it into the OBD II port and you’re all set. If for any reason you are not 100% satisfied, please contact us for a full hassle-free refund or replacement!
- 【Broad Compatibility】ANCEL HD601 heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford duty trucks and so on. It can also check engine diagnosis on most cars, minivans and light trucks from 1996 and latest.
- 【Full Systems Diagnosis】HD601 Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 and SAE J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System and etc, is a great scan tool for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, BendixWabash, Wabaco, Haldex, Allison, Eaton heavy trucks... With this truck tool, you can get deep analysis data about the systems and do some repairs by yourself, saving much time and money.
- 【Professional Diesel OBD Scanner】As a 2-in-1 code reader, It supports the latest ISO27145 and Euro6 protocols, enabling diagnosis of car and heavy trucks engine. In addition to reading codes, clearing codes and viewing live data in a text or graphic format for trucks, you can also retrieve vehicle information, view freeze frames, and look up DTCs; Moreover, to ensure this device will work with various engines, it also comes equipped with various 6pin, 9pin, and 16pin cables.
- 【DTC Library】+【Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics.
- 【Easy to Use】This scanner is plug and play, simple and convenient, and very friendly to beginners. Features improved keys for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency for diagnostic and service work.
- 【Professional DPF Regen Tool】Diesel particle filters give owners of diesel vehicles lots of problems, often expensive, time-consuming and inconvenient ones, HD3300 can easily solve the above problems. HD3300 support OEM-level DPF function for Cummins, Detroit, Caterpillar, International, Volvo, Paccar, Isuzu, Fuso, including DPF regeneration, DPF reset, BlueTec, DPF related information reset, DPR state reset, forced DPR regeneration, differential pressure check, DPD forced regeneration etc.
- 【Anvanced Oil Light Reset Function】Changing oil is the most important part of routine maintenance for vehicle. HD3300 support OEM level oil reset for ISUZU & FUSO, help reset the Oil Life Reminder (turn off the Oil Service Light) when the replacement of engine oil is done in case of the impurities in oil may damage the engine. So vehicles can recalculate another optimal oil life change interval depending on the vehicle driving conditions and climate, makes your driving safety gets ensuring.
- 【All System Diagnostic for Almost All Diesel Trucks】ANCEL HD3300 Diesel Scanner supports all-system scans of heavy duty trucks compliant with standard HD OBD protocols, such as Engine, ABS/EBS, Transmission, Body Controller, Chasis Controller, Instrument Panel System, Cruise Control, Gateway and etc. With this tool, you can get deep analysis data about the systems and do some repairs by yourself, saving much time and money.
- 【Standard Diesel OBD & OBDII Protocols】The HD3300 not only supports standard HD OBD protocols (the latest J27145 included), which covers the most popular heavy-duty trucks(both 12V & 24V) in American market, such as Cummins, Caterpillar, Detroit, Volvo, International and more. But also supports standard OBDII protocols, which covers engine system of mainstream cars and light vehicles(after 1996) all over the world. Such strong compatibility makes it more cost-effective than the competition.
- 【Full OBD Level Diagnosis】HD3300 is a 2-in-1 comprehensive diagnostic platform integrating 24V heavy duty truck scanner and 12V car scanner, and it comes with 6-pin, 9-pin and 16-pin adapters for different interfaces. HD3300 can perform engine diagnostics, read and erase the trouble codes that can cause emission problems with your vehicle, turn off the MIL (check your car engine) , show live data steam of multiple sensors in graph and text, vehicle identification Info (VIN, CIN, CVN) and so on.
- 👍【Designed for Cummins】Ancel HD3400 heavy duty truck scanner can read/clear codes, live data, ECU, DPF regen, DPF reset, etc. for your Cummins engine: Cummins X12/x15/ISX15/L9/B6.7/Westport L9N, such as Freightliner, Peterbilt, Kenworth, International, Ford Pick-up F650/F750, Chevy Pick-up, RAM Pick-up, Volvo Truck, Mack, Western Star, Autocar, Ford F600/F700, Terex TR50, Bluebird, Bobcat, Komatsu, Zoomlion, ect.
- 👍【Designed for Detroit】HD3400 heavy duty truck scan tool can work for your Detroit DD13/DD15/DD16, Freightliner Cascadia M2/108SD/114SD/122SD, Western Star 4700/4800/4900/6900/47X, Kenworth C500, ect.
- 👍【Designed for Paccar】The diesel scan tool is compatible with your Paccar engine: Paccar PX-7/PX-9, such as Kenworth T780/K270E/K370E/T680 Next Gen/T680/T880/W990/T180/T280/T380/T480, Peterbilt 579/389/567/367/365/548/535/536/537/220, ect.
- 👍【Designed for Caterpillar】HD3400 diesel scanner diagnostic tool also work for your Caterpillar C7/C15/C32, Ford Pick-up F-650/750, Freightliner M2/Argosy, Peterbilt 379/387/385/378/357, Kenworth C500, Caterpillar 320D/312E,/312F, ect.
- ✅【Excellent DPF Regeneration】This diesel code reader provides you with powerful DPF capabilities, including active(auto) regen, passive regen, DPF related information reset, DPR state reset, forced DPR regen, differential pressure test, DPD forced regeneration etc. OEM level DPF function, saving you the cost of purchasing a DPF. ❗️Please note that first read out the engine from Diesel OBD and then go to DPF menu to find the corresponding model to do DPF.
- 🚛【2022 PROFESSIONAL HEAVY DUTY SCANNER】Autel CV Diagnostic Scan Tool Autel MS908CV can perform enhanced all system diagnostics on 20+ makes, 80+ models of light, medium, and heavy trucks and commercial vehicles. It can read/ clear codes, view and graph live data, perform tool-guided maintenances, complete an array of special functions and diagnose manufacturer-specific systems including Allison transmissions, Bendix Brake systems, Detroit Diesel Engines, Eaton and Wabash ABS trailer brakes etc.
- 🚛【ADVANCED ECU CODING】As a high-end diagnostic tool, Autel Scanner MS908CV is featured with advanced ECU coding function. It can retrieve and re-flash the CVs’ control modules information, and write adaptive data for certain components after repairs or replacements to fix the issues as: Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts etc. Note: ECU Coding is not universally compatible, please send VIN to autelauthorized @ outlook. com to check before order.
- 🚛【ACTIVE TEST/ BI-DIRECTIONAL CONTROL】Autel commercial vehicle diagnostic scan tool MS908CV has bi-directional control capability over various car systems and components and is able to command the actuator to perform specific tests to pinpoint faults, such as rolling up / down a window, turning the fuel pump on and off, cycling the a/c clutch on and off and etc. To check compatibility, please send VIN to autelauthorized @ outlook. com.
- 🚛【OE-LEVEL ALL SYSTEMS DIAGNOSE, 80+ VEHICLE COVERAGE】OBD2 truck scan tool MS908CV has complete capabilities for DTCs, live data, actuation tests, adaptations for all the available electrical systems, it displays live data in text, graph, analog and digital gauge for easy data review and analysis. MS908CV advanced scanner can work on 80+ commercial vehicle brands of heavy duties, light duties, trucks, gas vehicles, construction vehicles, buses and so on for comprehensive diagnosis and services.
- 🚛【25 SERVICES+ 23 ADAPTATION FUNCTIONS】Autel heavy duty diagnostic tool MS908CV also performs 25 maintenance services like Oil Reset, Injector Coding, DP-F, ABS bleeding, SAS reset, Throttle, Cylinder, Trans Adaptation etc, and 23 adaption functions such as O2 Sensor Calibration, Fuel Pressure Adaptation. Those functions work perfectly for the 99% of commercial vehicles in U.S. Services are not universally compatible, please send VIN to autelauthorized @ outlook .com to check.
- ❶【What is the KC601】 It is the latest portable vehicle heavy duty code reader. You can use it to quickly and efficiently read DTCs in the vehicle's electrical control system, diagnose the fault location and find out the cause of the fault. Good for all auto repair shops to read and clear fault codes and read live data.
- ❷【Powerful Functions】KC601 scanner is able to read and clear fault codes of all major systems, including engine, transmission, ABS, and supports checking body, chassis, cruise, instrument cluster, gateway and other control modules. Equipped with a standard OBDII diagnostic jack, allowing you to diagnose DTCs in your vehicle's electrical control system anytime, anywhere.
- ❸【Unmatched Compatibility】KZYEE's KC601 diagnostic scanner supports heavy-duty vehicles in compliance with standard protocols (J1939 or J1587/J1708). Covers most ECU such as Cummins, Freightliner, International, Kenworth, Mack, VOLVO, etc. Power is supplied directly from the vehicle. Included are both a 6-pin and 9-pin cable for maximum vehicle compatibility and a micro USB cable for internet update.
- ❹【User-friendly design】The 2.8-inch, 320*240 LED display meets the operating habits of each user. The well-designed appearance, menu and functions of the products support the all-in-one function of OBD/EOBD vehicles, multi-language and LED -guided operation. Easy operation and high practicability
- ❺【100% Satisfactory Service】What you get ➤KZYEE KC601 high performance code reader, user manual, USB cable, storage bag, OBDII cable and diesel-6 and diesel-9 cable. KZYEE offers 30 days return policy & 1 years warranty & lifetime technical support & friendly customer service.
- 🚂【Professional All System Heavy Duty Truck Scanner】FCAR 505 Pro all system truck scanner diagnostic tool is specially for 24v heavy duty trucks, checking thoroughly on all available systems like Engine, HVAC(air conditioner), Transmission, ABS, SRS, TPMS, ECM, DME/DDE, EGS, CAS, CBS, ADS, Battery, Headlight, etc.. It can read and clear error codes after repairing the car fault, show graphical live data, read ECU Information and read Freeze Frame. Say goodbye to potential all vehicle issues!
- 🚌【Comprehensive All System Diagnostic for Diesel Trucks】Are you afraid of this powerful All system diagnostic only available for Isuzu,Hino,Fuso,UD? No, this fcar 506 pro diesel obd2 scanner also can support all systems check for INTERNATIONAL, KENWORTH, FORD(6/9PIN, GM TRUCK(CAT.), GMC TRUCK, PIERCE, FREIGHTLINER, PETERBILT, STERLING, WESTERN STAR, CCC, AMERICAN LAFRANCE, Autocar, BLUEBIRD etc. by entering the DIESEL OBD MENU. It also can help you diagnose deeply.
- 🚚【OEM-Level DPF Reset& Regeneration】+【Designed for Isuzu,Hino,Fuso,UD】 The diesel scan tool can support powerful D-P-F functions for your trucks, including DPF Status Check, DPF Reset, DPF differential pressure detection, Forced DPF regeneration for Hino,Isuzu,Fuso,UD's trucks. And this diesel code reader can help you far away from dealership trip when D-P-F issue happened and improve the service life. Note: Please enter the exclusive menu of Hino,Isuzu,Fuso,UD and then select related function
- 🚐【Designed for ISUZU】This heavy duty diagnostic scan tool can perform D-P-F Reset& Regeneration for ISUZU 4HE1, 4HG1, 4HJ1, 4HK1, 4HL1, 4HV1, 4JA1, 4JB1, 4JG2, 4JH1, 4JJ1, 4JJ3 4JK1, 4KH1, 4ZE1, 6HK1, 6HL1, 6UZ, 6WF1, 6WG1, RZ4E, GAS. Such as the vehicles in ISUZU America area: FTR W, N series, Stripped Chassis, N/W series, F/T series, FRR/WT5500, C-series, H/C series.
- 💡【Designed for Hino】The 506 pro heavy duty truck scan tool can operate D-P-F Reset& Regeneration for Hino A09C, J05E, J05C, J05D, J07E, J08E, S05C, N04C, N05C, A09C, E13C,P11C. And it Support D-P-F about Euro2/3/4/5/6 for Mitsubishi Fuso, like Canter, Fighter, Super great vehicles.
Last update on 2022-09-29 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.