“This site contains affiliate links for which OEMDTC may be compensated” |
July 13, 2022 NHTSA CAMPAIGN NUMBER: 22V502000
Front Axle Module Welds May Crack
A loss of steering control can increase the risk of a crash.
NHTSA Campaign Number: 22V502
Manufacturer Van Hool N.V.
Components SUSPENSION
Potential Number of Units Affected 68
Summary
Van Hool N.V. (Van Hool) is recalling certain 2021 TDX25 motorcoaches. The front axle module welds may crack, possibly causing the front axle to fail and resulting in a loss of vehicle steering control.
Remedy
Dealers will repair the welds as necessary, and install reinforcement plates, free of charge. Owner notification letters were mailed July 27, 2022. Owners may contact Van Hool’s customer service at 1-877-427-7278 or 1-407-656-7977. Van Hool’s number for this recall is SB2180.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
DESCRIPTION:
On the above mentioned vehicles, there is a possibility that some welds on the front axle subframe are not properly executed. Reinforcements parts must be installed in order to strengthen the front axle subframe. It is of the upmost importance that your vehicle is being inspected as soon as possible by ABC Companies.
Chronology :
On June 13th, 2022, Van Hool’s distributor ABC Companies notified Van Hool of a major failure of the front axle module of a TDX25 vehicle. Van Hool subsequently investigated together with its distributor. Inspections of the front axle module of this and other vehicles of the same model and model year indicated that some welds are not properly executed (incomplete penetration and fusion). The recall population is determined on the basis of a clearly defined batch of front axle modules sourced from a specific component manufacturer. The final list of VIN’s concerned was determined on July 11th. Van Hool management decided to notify NHTSA on July 12th.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
VAN HOOL | TDX25 | 2021 |
7 Associated Documents
Recall Acknowledgement
RCAK-22V502-2611.pdf 647.307KB
Defect Notice 573 Report
RCLRPT-22V502-7736.PDF 213.862KB
Remedy Instructions and TSB
RCRIT-22V502-0853.pdf 409.835KB
Recall 573 Report-Amendment 1 – 07/21/2022
RCLRPT-22V502-1020.PDF 213.874KB
Owner Notification Letter(Part 577)
RCONL-22V502-4523.pdf 833.848KB
Recall Quarterly Report #2, 2022-4
RCLQRT-22V502-1997.PDF 211.213KB
Recall Quarterly Report #1, 2022-3
RCLQRT-22V502-3011.PDF 211.213KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V502&docType=RCL
- [MORE POWERFUL] Up to 135 Amp output allows you to weld mild steel up to 2/5” in the plate. Suitable for 2LB .030” & .035” flux core wire.
- [MULTI-PROCESS] 3-in-1 Welder, capable of Gasless MIG/Stick/Lift TIG. (need to buy an extra lift TIG torch) Meets your various welding needs.
- [DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.
- [SYNERGIC CONTROL] When adjusting the wire feeding speed, the voltage will be automatically matched. Suitable for beginners and professionals.
- [SAFETY FIRST] Automatic compensation for voltage fluctuation, over current protection, over load protection.
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110(120)V / 220(230)V dual voltage (Automatic fitting).
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
- 【EASY TO USE】: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- 【POWERFUL AND SAGE WELDER MACHINE】: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
- 【PORTABLE DESIGN】: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- 【WIDE APPLICATIONS】: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- 【PACKAGE INCLUDES】: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
- 【POWERFUL 3-IN-1 MIG WELDER】The 135Amp MIG welder that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA. The machine is delivered ready for operation without adjustments with 0.8 mm diameter filler wire.Also, 0.6 mm, 0.9 mm or 1.0mm solid wire or cored wire can be used as filler wire.
- 【SYNERGIC CONTROL】Adjusting the welding power according to sheet thickness affects simultaneously both wire feed speed and amount of current lead to the wire. This is a good starting point for welding in different operating situations.It's suitable for both hobby and professional use.
- 【IGBT TECHNOLOGY】IGBT intelligent inverter technology. IGBT power device with unique control mode improves the reliability of welding machine. The flux core welder works more efficiently, reduces energy loss, and welds better.
- 【PACKAGE INCLUDED】1*MIG/MMA Welder; 1*8.2ft CCA cable with 200A Electrode holder; 1*8.2ft CCA cable with 200A Earth clamp; 1*8.2ft Power cable with American standard plug; 1*8.2ft fixed MIG; 1*slag hammer; 1*User Manual
- 【SAFETY & DURABLE】The machine has passed a variety of professional tests and certifications before leaving the factory.The welding gun has an overheating protector which prevents operation when the machine is overheated. The machine is also protected from too low or too high supply voltage.
- ➠【𝐒𝐲𝐧𝐞𝐫𝐠𝐢𝐜 𝐌𝐈𝐆 𝐂𝐨𝐧𝐭𝐫𝐨𝐥】The wire feeding speed (current) and welding voltage will be automatically matched after selected diameter of the welding wire (.030/.035 inch flux core wire). The MIG welder is easier to make a beginner becoming a master welder.
- ➠【𝐒𝐦𝐚𝐫𝐭 𝐒𝐭𝐢𝐜𝐤 𝐖𝐞𝐥𝐝】Bulit-in smart Hot-start and Arc-force provide easy, quick and reliable arc start, and stable welding current, this mini welder has ideal performance for the most E6013, E6011, E6010, E7018 and E308-16 rods.
- ➠【𝐋𝐢𝐟𝐭 𝐓𝐈𝐆 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧】This 3 in 1 welder has excellent Lift-arc TIG function, just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG welder for free.
- ➠【𝐒𝐚𝐟𝐞 𝐚𝐧𝐝 𝐒𝐭𝐚𝐛𝐥𝐞】This multiprocess welder built-in automatic Anti-stick, compensation for voltage fluctuation, over current protection, over heat protection, short circuit damage protection, to make sure the welding kit safely operation and long life.
- ➠【𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞】The wire feed welder is capable of welding all kinds of ferrous metals such as carbon steel, medium carbon steel, mild steel, stainless steel and cast iron. Only weighs 10.1 lbs, easy to carry with a handle or shoulder strap(included), very suitable for outdoor maintenance, farm, road equipment, and home DIY.
- Simple user interface - Seven segment display with basic knob controls.
- Process Capabilities - MIG, Flux-Cored and Spool Gun.
- Dual Input Voltage - 120V and 230V inputs so you can plug into any common power supply.
- Ergonomic Case - Sleek and robust case design with multiple lift points for ease of mobility around the shop.
- Lightweight and Portable - Only 41 lbs
- 【POWERFUL 3-IN-1 WELDER】Composed with Flux MIG, Lift TIG and Stick/MMA. Our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
- 【SYNERGIC CONTROL】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, wire feeding speed by adjusting amperage, which is quite friendly for both professional welding worker and beginner. You can also adjust machine parameters by manually In order to best suit for your demand.
- 【SAFE & INTELLIGENT】Our MIG welder features overheat and overload protection will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
- 【LIGHTWEIGHT & DURABLE】Item Dimensions: 13.6(L) x 6.6(W) x 11.15(H) inches, welder machine weight: 10.14lbs. This lightweight 135amp stick welder designed with two portable handles, allows you to take it anywhere, and you can add a shoulder belt by your own if need. Besides, IP21 water rating better protect your welder and extend its service life.
- 【SET INCLUDES】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030" 2lb flux core welding wire.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
SB2180_US_en_2022-07-15 Page 1 of 2 ADDRESSEES : Owners and operators of vehicles listed under “Application” ABC Customer Care and Parts Source VEHICLE MODEL : TDX25US MANUAL CHAPTER : 10.38 Body and body accessories – Body structure BULLETIN TYPE : Safety Recall NHTSA 22V-502 DATE : July 15th, 2022 SUBJECT : To inspect front axle subframe for not properly executed welds CONDITIONS : – APPLICATION: The safety recall campaign, subject of this bulletin, is applicable to the vehicles below: Model VIN Number of vehicles TDX25US 8916689185, 89200, 8920289248 68 DESCRIPTION: On the above mentioned vehicles, there is a possibility that some welds on the front axle subframe are not properly executed. Reinforcements parts must be installed in order to strengthen the front axle subframe. It is of the upmost importance that your vehicle is being inspected as soon as possible by ABC Companies. Continued on next page SERVICE BULLETIN SB2180 Figure 1: View on LHS of front axle subframe SB2180_US_en_2022-07-15 Page 2 of 2 Van Hool apologizes for the inconvenience caused by this safety recall and wishes to thank you in advance for your cooperation and attention to this matter. WHAT TO EXPECT FROM ABC COMPANIES? ABC Companies will contact you as soon as possible to make an appointment with regard to safety recall “SB2180”. ABC Companies will after inspection decide which further action must be taken. Repair instructions are included in work procedure WP1641. WHAT DO WE EXPECT FROM YOU? We expect you to cooperate with this safety recall when contacted about this subject. If you fail to do so, you risk to be held totally responsible. HELP DESK If there are any questions, please call ABC Customer Care & Parts Source toll-free for guidance on 1-877-427-7278. Listen for the prompts for warranty and select that option. DISCLAIMER: The procedures contained herein are not exclusive. Van Hool cannot possibly know, evaluate, or advise the transportation industry of all conceivable ways in which a procedure may be undertaken or of the possible consequences of each such procedure. Other procedures may be as good, or better, depending upon the particular circumstances involved. Each carrier who uses the procedures herein must first satisfy itself thoroughly that neither the safety of its employees or agents, nor the safety or usefulness of any products, will be jeopardized by any procedure selected. VAN HOOL CUSTOMER PORTAL: Consult the customer portal regularly for the latest service documentation. In addition to the maintenance manual, you will also find the operating manual and the spare parts catalogue of your vehicle on the customer portal. The customer portal is accessible through www.vanhool.be, and only with a code (password) from Van Hool. If you do not have a password yet, request it by using the link on the Van Hool website. INFORMATION HANDLING: Important additions and modifications regarding technical information not yet included in the manual will be communicated through Service Bulletins.
**************************************************************************************************************
IMPORTANT SAFETY RECALL This notice applies to your vehicle (s) listed on the attached VIN List. This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. July 27, 2022 Subject: NHTSA Recall Campaign 22V502 / Van Hool S6 2180 Defect: Welds on Front Axle Module Are Cracking Affected units: Certain Van Hool Motorcoaches model year 2021 Van Hool NV has decided that a defect which relates to motor vehicle safety exists in the affected motorcoaches: some welds of the front axle subframe module are not properly executed (incomplete penetration and fusion). The improperly executed welds may result in gradual cracking of welds in the front axle module, and as a result, it may not be able to hold the weight/forces It is intended for. If the cracks are far advanced this may finally impact the steering mechanism. A loss of steering control can increase the risk of a crash. To remedy this issue, Van Hool is recalling all potentialfy affected motorcoaches for inspection and repair. If any welds are cracked, repair will be required prior to any further use of the vehicle. Welds which are not properly executed have to be removed and rewelded. Extra reinforcement plates will be welded to the front axle module on specified positions on all vehicles included in the recall population. See service bulletin SB2180. The remedy repair will be conducted free of charge. Please contact ABC Bus Inc., our designated agent in the United States, to schedule the inspection and repair and to ensure that parts are available. ABC Bus Inc., 17469 West Colonial Drive, Winter Garden, FL 34787 The replacement will take approximately 48 hours of work spread over 2-3 days and will be performed at no cost for parts or labor to you. If you believe that Van Hool NV and ABC Bus Inc. have failed to remedy the defect without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D. C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327- 4236 (TTY 1-800-424-9153) or go to http://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of the pre-notification remedy of the problem associated with this recall. If any additional Information Is needed, please feel free to contact ABC Bus Inc. at (407) 656 7977 or 1- 877-427-7278 (toll free). Van Hool NV and ABC Bus Inc. apologize for any inconvenience this may cause, however this action is taken in the interest of your safety and continued satisfaction with our vehicles. 17469 West Colon/al Drive • WlnterGarcJen, FL 34787 800.222.2871 • 407.856. 7977 • Faes/mite 407,905.7010 www.ebe-compenles.com IMPORTANT SAFETY RECALL This notice applies to your vehicle (s) listed on the attached VIN List. This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. July 27, 2022 Subject: NHTSA Recall Campaign 22V502 / Van Hool S82180 Defect: Welds on Front Axle Module Are Cracking Affected units: Certain Van Hool Motorcoaches model year 2021 Van Hool NV has decided that a defect which relates to motor vehicle safety exists in the affected motorcoaches: some welds of the front axle subframe module are not properly executed (incomplete penetration and fusion). The improperly executed welds may result in gradual cracking of welds in the front axle module, and as a result, it may not be able to hold the weight/forces it is intended for. If the cracks are far advanced this may finally Impact the steering mechanism. A loss of steering control can increase the risk of a crash. To remedy this issue, Van Hoof is recalling all potentially affected motorcoaches for inspection and repair. If any welds are cracked, repair will be required prior to any further use of the vehicle. Welds which are not properly executed have to be removed and rewelded. Extra reinforcement plates will be welded to the front axle module on specified positions on all vehicles included in the recall population. See service bulletin SB2180. The remedy repair will be concJ.ucted free of charge. Please contact ABC Bus Inc., our designated agent in the United States, to schedule the inspection and repair and to ensure that parts are available. ABC Bus Inc., 17469 West Colonial Drive, Winter Garden, FL 34787 The replacement will take approximately 48 hours of work spread over 2-3 days and will be performed at no cost for parts or labor to you. If you believe that Van Hool NV and ABC Bus Inc. have failed to remedy the defect without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D. C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327- 4236 (TTY 1-800-424-9153) or go to http://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. If you had this repair performed before you received this fetter, you may be eligible to receive reimbursement for the cost of the pre-notification remedy of the problem associated with this recall. If any additional information Is needed, please feel free to contact ABC Bus Inc. at (407) 656 7977 or 1- 877-427-7278 (toll free). Van Hool NV and ABC Bus Inc. apologize for any inconvenience this may cause, however this action is taken in the interest of your safety and continued satisfaction with our vehicles. 17469 West Colonial Drive ■ Winter Garden, FL 34787 800.222.2871 ■ 407.656.7977 ■ Facsimile 407.905.7010 www.abc-companles.com IMPORTANT SAFETY RECALL This notice applies to your vehicle (s) listed on the attached VIN List. This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. July 27, 2022 Subject: NHTSA Recall Campaign 22V502 / Van Hool S82180 Defect: Welds on Front Axle Module Are Cracking Affected units: Certain Van Hool Motorcoaches model year 2021 Van Hool NV has decided that a defect which relates to motor vehicle safety exists in the affected motorcoaches: some welds of the front axle subframe module are not properly executed (incomplete penetration and fusion). The improperly executed welds may result in gradual cracking of welds in the front axle module, and as a result, it may not be able to hold the weight/forces it is intended for. If the cracks are far advanced this may finally Impact the steering mechanism. A loss of steering control can increase the risk of a crash. To remedy this issue, Van Hool is recalling all potentially affected motorcoaches for inspection and repair. If any welds are cracked, repair will be required prior to any further use of the vehicle. Welds which are not properly executed have to be removed and rewelded. Extra reinforcement plates will be welded to the front axle module on specified positions on all vehicles included in the recall population. See service bulletin SB2180. The remedy repair will be conducted free of charge. Please contact ABC Bus Inc., our designated agent in the United States, to schedule the inspection and repair and to ensure that parts are available. ABC Bus Inc., 17469 West Colonial Drive, Winter Garden, FL 34787 The replacement will take approximately 48 hours of work spread over 2-3 days and will be performed at no cost for parts or labor to you. If you believe that Van Hool NV and ABC Bus Inc. have failed to remedy the defect without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, D.C. 20590 or calf the toll free Vehicle Safety Hotline at 1 ·888-327- 4236 {TTY 1-800-424-9153) or go to http://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of the pre-notification remedy of the problem associated with this recall. If any additional information is needed, please feel free to contact ABC Bus Inc. at (407) 656 7977 or 1- 877-427-7278 (toll free). Van Hool NV and ABC Bus Inc. apologize for any inconvenience this may cause, however this action is taken in the interest of your safety and continued satisfaction with our vehicles. 17469 West Colon/sf Orive • Winter Gorden, FL 34787 800.222.2871 • 407.656.7977 • Facslmlle 407.905.7010 WMV. abc-companlos.oom Serial Number ~ ~ VIN LIST Model Customer Name TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25 TDX25
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-502 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Van Hool N.V. Submission Date : JUL 13, 2022 NHTSA Recall No. : 22V-502 Manufacturer Recall No. : SB2180 Manufacturer Information : Manufacturer Name : Van Hool N.V. Address : BERNARD VAN HOOLSTRAAT 58 LIER-KONINGSHOOIKT (BELGIUM) 00 B2500 Company phone : 999 Population : Number of potentially involved : 68 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Van Hool TDX25 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population is determined on the basis of a clearly defined batch of front axle modules sourced from a specific component manufacturer, who began supplying the component part in April 2020. Production Dates : SEP 16, 2021 – DEC 23, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Some welds of the front axle module are cracking. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The improper executed welds may result in gradually cracking of welds in the front axle module as a result of which it may no longer hold the weight it is intended for. If the cracks are far advanced this may finally impact the steering mechanism. Description of the Cause : Some welds may not be properly executed (incomplete penetration and fusion). Identification of Any Warning that can Occur : None prior to actual cracking of weld(s). Involved Components : Part 573 Safety Recall Report 22V-502 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Front Axle Module Component Description : Front Axle Module Component Part Number : 11709252 Supplier Identification : Component Manufacturer Name : Aktiva, Doo Stip Address : Goce Delcev 50 Stip Foreign States 2000 Country : Macedonia, the Former Yugoslav Republic of Chronology : On June 13th, 2022, Van Hool’s distributor ABC Companies notified Van Hool of a major failure of the front axle module of a TDX25 vehicle. Van Hool subsequently investigated together with its distributor. Inspections of the front axle module of this and other vehicles of the same model and model year indicated that some welds are not properly executed (incomplete penetration and fusion). The recall population is determined on the basis of a clearly defined batch of front axle modules sourced from a specific component manufacturer. The final list of VIN’s concerned was determined on July 11th. Van Hool management decided to notify NHTSA on July 12th. Description of Remedy : Description of Remedy Program : Potentially impacted vehicles will be inspected. If any welds are cracked, repair will be required prior to any further use of the vehicle. Welds which are not properly executed have to be removed and rewelded. Extra reinforcement plates will be welded to the front axle module on specified positions on all vehicles included in the recall population. How Remedy Component Differs from Recalled Component : The remedy component will be the recalled component with repaired welds (if welds are not properly executed) and reinforcement plates (for all vehicles included in the recall population). Identify How/When Recall Condition was Corrected in Production : Van Hool and component manufacturer are implementing a corrective action plan to ensure proper execution of the welds (in particular to ensure complete penetration and fusion). Recall Schedule : Part 573 Safety Recall Report 22V-502 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Recall Schedule : ABC Companies will conduct the recall and notify owners. Van Hool will determine the schedule for timing of the owner notifications and publish its service bulletin for the vehicles concerned in its customers portal. Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-502 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Van Hool N.V. Submission Date : JUL 21, 2022 NHTSA Recall No. : 22V-502 Manufacturer Recall No. : SB2180 Manufacturer Information : Manufacturer Name : Van Hool N.V. Address : BERNARD VAN HOOLSTRAAT 58 LIER-KONINGSHOOIKT (BELGIUM) 00 B2500 Company phone : 999 Population : Number of potentially involved : 68 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2021 Van Hool TDX25 Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population is determined on the basis of a clearly defined batch of front axle modules sourced from a specific component manufacturer, who began supplying the component part in April 2020. Production Dates : SEP 16, 2021 – DEC 23, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Some welds of the front axle module are cracking. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The improper executed welds may result in gradually cracking of welds in the front axle module as a result of which it may no longer hold the weight it is intended for. If the cracks are far advanced this may finally impact the steering mechanism. A loss of steering control can increase the risk of a crash. Description of the Cause : Some welds may not be properly executed (incomplete penetration and fusion). Identification of Any Warning that can Occur : None prior to actual cracking of weld(s). Involved Components : Part 573 Safety Recall Report 22V-502 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Front Axle Module Component Description : Front Axle Module Component Part Number : 11709252 Supplier Identification : Component Manufacturer Name : Aktiva, Doo Stip Address : Goce Delcev 50 Stip Foreign States 2000 Country : Macedonia, the Former Yugoslav Republic of Chronology : On June 13th, 2022, Van Hool’s distributor ABC Companies notified Van Hool of a major failure of the front axle module of a TDX25 vehicle. Van Hool subsequently investigated together with its distributor. Inspections of the front axle module of this and other vehicles of the same model and model year indicated that some welds are not properly executed (incomplete penetration and fusion). The recall population is determined on the basis of a clearly defined batch of front axle modules sourced from a specific component manufacturer. The final list of VIN’s concerned was determined on July 11th. Van Hool management decided to notify NHTSA on July 12th. Description of Remedy : Description of Remedy Program : Potentially impacted vehicles will be inspected. If any welds are cracked, repair will be required prior to any further use of the vehicle. Welds which are not properly executed have to be removed and rewelded. Extra reinforcement plates will be welded to the front axle module on specified positions on all vehicles included in the recall population. How Remedy Component Differs from Recalled Component : The remedy component will be the recalled component with repaired welds (if welds are not properly executed) and reinforcement plates (for all vehicles included in the recall population). Identify How/When Recall Condition was Corrected in Production : Van Hool and component manufacturer are implementing a corrective action plan to ensure proper execution of the welds (in particular to ensure complete penetration and fusion). Part 573 Safety Recall Report 22V-502 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : ABC Companies will conduct the recall and notify owners. Van Hool will determine the schedule for timing of the owner notifications and publish its service bulletin for the vehicles concerned in its customers portal. Planned Dealer Notification Date : JUL 21, 2022 – JUL 21, 2022 Planned Owner Notification Date : JUL 27, 2022 – JUL 27, 2022 * NR – Not Reported
SEOCONTENT-END