22E049 – EQ-J2044 – Corrosion May Cause Fuel Line Leak – Roush – GEN 4 & GEN 5 LPG Conversion Systems

“This site contains affiliate links for which OEMDTC may be compensated”

June 9, 2022 NHTSA CAMPAIGN NUMBER: 22E049000

Corrosion May Cause Fuel Line Leak

A corroded fuel line can leak fuel, increasing the risk of a fire.

 

NHTSA Campaign Number: 22E049

Manufacturer Roush CleanTech, LLC

Components FUEL SYSTEM, OTHER

Potential Number of Units Affected 12,823

 

Summary

Roush Cleantech, LLC (Roush) is recalling certain fuel return lines included in GEN 4 and GEN 5 LPG Conversion Systems that were installed on vehicles sold or registered in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, Washington D.C., West Virginia, and Wisconsin. The zinc-plating on the fuel return line may break away when contacted by road debris, causing two dissimilar metals on the fuel line to contact each other and corrode.

 

Remedy

Roush will work with the affected vehicle manufacturers and their dealers to replace the fuel return lines, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Roush’s customer service at 1-800-597-6874. Roush’s number for this recall is EQ-J2044.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

In Oct 2020, Roush was informed that two Blue Bird school buses in PA had experienced apparent corrosion-caused fuel return line fitting failures about 3 weeks apart. Roush started to investigate service history, engineering, and supplier quality. Several additional similar warranty claims were reported in 2021.

By Spring 2022, Roush had received a total of 19 corrosion warranty claims, with no fires. These claims arose solely in Salt Belt states and involved vehicles with various mileage and manufacturing dates.

Roush began its Salt Belt and non-Salt Belt geographic field and laboratory investigation in 2021. In total, Roush inspected (and rated for degree of corrosion) the fittings on more than 166 representative vehicles as described in the “Describe the Cause” section above. The inspections identified the vehicle make, model, part number, part location, orientation, mileage, alteration date, geographic location, and route characteristics.

Some non-leaking fittings observed with exterior corrosion were dissected to ascertain the extent of any internal compromised metal.

Roush also conducted two types of laboratory salt spray testing. The ASTM B117 salt spray testing varied the orientation of the fittings in the salt test chamber (parallel to ground, perpendicular, 45 degrees, reversed male tube directions). Roush’s modified salt spray testing included a road debris pecking simulation. Roush then tested fittings equipped with additional spiral wrap protection, with braided loom protection, and with a combination of the two protections.

Based on the results of its investigation, in late May 2022, Roush decided to submit this report.

 


1 Affected Product

Equipment

BRAND PART NO. PRODUCTION DATES
ROUSH CLEANTECH LPG RETURN LINES

 


3 Associated Documents

Defect Notice 573 Report

RCLRPT-22E049-7922.PDF 218.728KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [213.60 KB]

 


Recall Acknowledgement

RCAK-22E049-1639.pdf 647.152KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [631.98 KB]

 


Recall 573 Report – 04/19/2023

RCLRPT-22E049-4472.PDF 220.043KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [214.89 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E049&docType=RCL

 


 

Bestseller No. 1
YAMAKATO 10 Feet 1/4 Inch ID Fuel Line Hose for Kawasaki Kohler Briggs & Stratton Small Gas Diesel Powersports Engines and Generators w/ 20 Clamp Rubber Black
  • For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.
  • Strechy 2 layers compound structure, heavy duty. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.
  • The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, mini bikes, dirt bikes, generators, trash water pumps, pit bikes, ATV, UTV, go karts, tao tao, 4 wheelers, snowmobiles, power pressure washers, marine boat outboardand motors, just about all small engines
  • For Briggs and Stratton MTD Troy Bilt Craftsman Tecumseh Cub Cadet Yard Machine Yard Man lawn mowers and snow blowers etc. Package includes one 10 feet fuel line and 20pcs Hose Clamps.
SaleBestseller No. 2
4 Sizes Petrol Fuel Gas Line Pipe Hose Tubing For String Trimmer Chainsaw Blower Lawn Mower and other Power Tools For 2 Cycle Small Engine for Poulan, Craftman (Yellow 4PC)
  • 4 Different Size Fuel Line Hose - I.D x O.D: 0.08" x 0.14" (2mm x 3.5mm), 1/8" x 1/4" (3mm x6mm),1/8" x 3/16"(3mm x5mm),3/32" x 3/16" (2.5mm x5mm)
  • 4 Feet Long Fuel Line Fuel Hose Fuel Tube
  • Our Fuel Hose Line Tube Fits for Most 2 Cycle Small Engines
  • Perfect Replacement Fuel Line Set for chainsaws, blowers, weedeater whackers trimmers and other engine machines
  • Premium Material petrol fuel line - Oil and gas resistant, corrosion resistant.
SaleBestseller No. 3
Tnisesm 5 Size Fuel Line Hose - 3/8" 1/2" 5/16" 1/4" 3/16" ID NBR Rubber 3.3ft with 20Pcs Clamps for Small Engines Kawasaki EZGO Golf Cart Snowmobile Motorcycle ATV Tractor
  • 〓Tubing Kit Includes-3.3ft NBR fuel line hose (inner diameter are 3/16inch, 1/4inch, 5/16inch, 1/2inch, 3/8inch) and 20Pcs Spring hose clamps. 5 different specifications can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools.
  • 〓High Quality Material-The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. The wall of fuel rubber hose is thick enough, which has the advantages of not easy to wear, aging, high temperature resistance, low temperature resistance and good acid and alkali resistance.
  • Fuel Hose Size-3/16(Inner diameter: 4.8mm; Outer diameter: 11mm);1/4(Inner diameter: 6mm; Outer diameter: 12mm); 5/16(Inner diameter: 8mm; Outer diameter: 15mm);3/8(Inner diameter: 10mm; Outer diameter: 17mm); 1/2(Inner diameter: 13mm; Outer diameter: 20mm)The cost-effective product portfolio can meet your different needs at the same time.
  • 〓Temperature range:-40 F to+300 F; Maximum working pressure: 300 psi; Burst pressure: 1160 psi; Professional oil resistance DN8MM 20BAR maximum working pressure.
  • 〓Extensive Use-Widely used in oil tanks, oil pumps, engines, and other parts that come in contact with oil.Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes.The hose clamp included in the product can help you fix the tubing well and make it serve you for a long time.
Bestseller No. 4
3/8 Inch (10mm) ID Fuel Line Hose 10FT NBR Rubber Push Lock Hose High Pressure 300PSI for Automotive Fuel Systems Engines
  • 【Size】ID: 3/8" (10mm), OD: 2/3" (17mm), Length: 10FT.
  • 【Working Conditions】NBR Fuel Hose Working Temperature Range: -40°F to 257°F. Working Pressure: 300PSI. Burst Pressure: 1160PSI.
  • 【Premium Material】Made of premium NBR materials, long service life, wear resistance and high temperature resistance, perfect racing accessories for fuel injection.
  • 【Applicable Medium】NBR Fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air, etc.
  • 【Wide Application】NBR Fuel Line Hose widely used in the fuel system, steam emission, oil cooling, please check the pressure of application before purchase.
SaleBestseller No. 5
CocoMocart 10-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
  • The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 10 Foot Length (3M) can be cut to size for all your applications
  • Package includes:10 Feet(3m) 1/4" ID Fuel Line,20 X 2/5" ID Hose Clamps
  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines.
  • Fuel line:1/4 inch inside diameter (0.64 cm) and 2/5 inch outside diameter (1cm);Hose Clamp for 1/4-inch and 1/4-inch Fuel Filter.
Bestseller No. 6
AloneGoer 3 Feet 1/8" 3/16" 0.22" 1/4" 5/16" ID Fuel Line Gas Tube Hose Compatible with Kawasaki EZGO Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle w 40PCS Clips
  • Flexible Set: Our 5 Sizes Set includes fuel line gas tube hose sizes with lengths of 3 feet: 1/8" (3.5mm7.5mm), 3/16" (4.5mm8.5mm), 0.22"0.4" (5.5mm10.3mm), 1/4" (6mm12mm), and 5/16" (7.3mm12.5mm) and 40 hose clamps for various home outdoor mechanic occasions.
  • Durable Material: Made of NBR rubber with a braided layer of polyester thread, our thicker fuel hose is wear-resistant, anti-aging, high/low temp resistant, and has good acid and alkali resistance.
  • Multiple Sizes: With 5 different sizes available, our flexible NBR rubber tubes can fit various small engines including ATVs, lawn mowers, tillers, tractors, snow blowers, motorcycles, motor bicycles, generators, and more.
  • Longevity: The smooth and flat surface of our fuel hose can withstand large pressure, and the included hose clamps secure the oil line well, ensuring long service life.
  • Wide Applications: Suitable for fuel systems, oil cooling, vapor discharge, and more, our fuel lines can convey gasoline, diesel, biodiesel, motor oil, lubricant, water, and air.
SaleBestseller No. 7
3/8 6AN 20FT, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fitting Adapter Kit - Black
  • Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.
  • Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided add CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.
  • Safety Features For Your Protection: Fuel Hose: Size : 6AN, Length: 12FT, Working Temperature: -100 F to 500 F, Pressure Tolerance: 350 PSI, the fuel line has good flame retardancy and excellent corrosion resistance.
  • Package Includes: 1 6AN 12FT Nylon Braided Hose, 2 Straight Swivel Hose Ends, 2 45 Degree Swivel Hose Ends, 2 90 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak.
Bestseller No. 8
5/16" ID Fuel Line Hose SAE 30R7, 150 psi 25' Length Fuel Hose
  • 【5/16" Fuel Line Hose Widely Used】 Multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.
  • 【High Quality Material】 Fuel Hose Made of NBR rubber, resistant to diesel, gasoline, lubricating oil, hydraulic oil, coolant, etc, Also available in unleaded gasoline, diesel, ethanol (E-10), E-85 and sour gas blends.
  • Fuel Hose Size】 Inner Diameter (ID): 5/16" (0.3125"), Outer Diameter (OD): 0.55"(14mm), Length: 25FT.
  • 【Working Pressure and Temperature Range】 150 psi Burst Pressure: 500 psi, -40°F to 257°F (-40°C to 125°C).
  • 【After-Sales Service】 Buy with confidence. We offer free returns and exchanges, if you have any questions, please feel free to contact us by email.
Bestseller No. 9
5 Size Fuel Line Hose - 3/8" 1/2" 5/16" 1/4" 3/16" ID NBR Rubber Gasoline Tube High Pressure 300PSI, Suitable for Kawasaki EZGO Golf Cart Snowmobile Motorcycle ATV Tractor 3.3ft
  • 【5 Sizes Set】you will receive 5 different specifications lengths 3.3ft NBR fuel line hose (inner diameter are 3/8in,1/2in,5/16in,1/4in,3/16in) and 20 hose clamps. The 5 different inner diameters of our products can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools.
  • 【Thicker Fuel Hose】Our oil hose is made of NBR rubber with a braided layer of polyester thread in the middle. The wall of our fuel hose is thick enough to have the advantages of not easy to wear, not easy to aging, high temperature resistance, low temperature resistance, good acid and alkali resistance. The bending performance of the fuel hose is very good. Working Pressure: 300 psi. Burst Pressure: 1160 psi. Temperature range: -20°F to 221°F(-30°C to 105°C).
  • Oil Tube Size】Our 5 different sizes of flexible NBR rubber tubes are: ID: 3/16in OD: 0.43in (11mm); ID: 1/4in OD: 0.47in (12mm); ID: 5/16in OD: 0.55in (14mm) ; ID: 3/8in OD: 0.64in (16.5mm); ID: 1/2in OD: 0.74in (19mm). This cost-effective product set can meet your different needs at once.
  • 【Long Service Life】Our fuel hose is not only well made, but also has a smooth and flat surface that can withstand large pressure, which is perfect for connecting and replacing the rubber fuel lines of various ATVs, motorcycles, snow blowers, lawnmowers, tractors, scooters, golf carts, motorcycles, pond pumps and other small engines. The hose clamps included in the product can help you secure the oil line well and make it serve you for a long time.
  • 【Widely Used】Our fuel lines can be widely used in oil tanks, oil pumps, engines, and other parts that come in contact with oil. It is suitable for fuel systems, oil cooling, vapor discharge, etc. It can convey gasoline, diesel, biodiesel, motor oil, lubricant, water, and even air. Tips: We do not recommend that you use this small engine fuel line to transport transmission coolant and methanol or on fuel injection systems. It is also not recommended for use with submersible power steering pumps.
SaleBestseller No. 10
Gates 27004 Fuel Line/PCV/EEC Hose-25' Length, Inner Diameter 3/8"
  • Cover resists heat, oil, ozone and weathering
  • Spiral reinforced construction
  • Tube has been upgraded to meet changes in fuel characteristics and resists heat and oil
  • Convenient 2-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard
  • Meets requirements of SAE J30R7 and DIN 73379 (except for tolerances)

Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...