“This site contains affiliate links for which OEMDTC may be compensated” |
June 30, 2022 NHTSA CAMPAIGN NUMBER: 22V469000
An overloaded electrical circuit can increase the risk of a fire.
NHTSA Campaign Number: 22V469
Manufacturer Altec Industries, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 430
Summary
Altec Industries Inc. (Altec) is recalling certain 2016-2022 van mounted AT200A and AT30G vehicles. The ground-fault circuit interrupter (GFCI) outlet may not provide adequate circuit protection against an electrical overload condition.
Remedy
Altec will install a new GFCI outlet with a circuit-breaker and new wiring, free of charge. Owner notification letters are expected to be mailed August 29, 2022. Owners may contact Altec’s customer service at 205-991-7733. Altec’s number for this recall is CSN 3008.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle. Refer to the provided list.
August 26, 2022
NHTSA Recall Number: 22V-469
Transport Canada Number: 2022-360
Altec Identifier: CSN-3008
Dear Altec Owner,
For US owners, this notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For Canadian owners, this notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in AT200A aerial devices built on cutaway vans from January 2016 to January 2022. These units have a GFCI outlet that could become overloaded during use. Overloading of a GFCI outlet could cause it to fail and produce a fire. Death or serious injury could result from a fire.
Refer to the included notice for the items covered under the Altec Warranty Policy. If you had this repair performed before you received this notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. All work will be performed at no charge to the customer when presented for repair.
Compare your unit’s identifying information with the provided list to verify your unit is affected. You may also contact Altec or view your fleet through Altec Connect to determine if there are any other outstanding notices.
The inspection and repair can be performed by the customer, or you may contact Altec for further assistance. The inspection is expected to take 15 minutes to complete. The repair is expected to take 2 hours to complete. Parts may not be immediately available due to supplier backorder.
If you have sold or retired the unit, update the records through Altec Connect. If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice.
For US owners: After contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or go to http://www.safercar.gov.
For Canadian Owners: If you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec.
We regret this inconvenience; however, we are taking this action in the interest of your safety and continued satisfaction with Altec products.
Thank you for your immediate attention on this important matter.
Chronology :
On February 2, 2022, a customer notified Altec that a service technician had identified that the generator circuit on an AT200A unit was rated at 30-amps with a connected 20-amp GFCI receptacle. The GFCI receptacle circuit does not have a circuit breaker installed to open the circuit when an overload of the circuit is detected.
After being notified, Altec reviewed production records. On May 3, 2022, a potential field action was opened to further evaluate customer work practice, the risk to workers, and determine what Models were affected and the field population of those units. On June 24, 2022, Altec determined that a potential defect was present in a certain field population and determined that a field campaign was required. There have been no warranty claims or other field reports identified. There have been no accidents, injuries, or deaths related to this issue.
14 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ALTEC | AT200A | 2016-2022 |
ALTEC | AT30-G | 2016-2022 |
3 Associated Documents
Recall Acknowledgement
RCAK-22V469-6448.pdf 698.963KB
Recall 573 Report
RCLRPT-22V469-7296.PDF 213.808KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V469-2256.pdf 1542.257KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V469&docType=RCL
- Provides continuous ground fault protection - detects and trips on actual ground fault even when self-test is being conducted
- For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault
- Status indicator light shows power and protection status as well as indication of line/load reversal
- Patented lockout action prevents reset if GFCI is damaged and cannot respond to a ground fault
- Terminals allow for easy wiring options – back and side wire capable
- 15 amp Non-Tamper Resistant Ground Fault Circuit Interrupter (GFCI) outlet receptacle for indoor use. Please kindly check if the depth of electrical box can fit our GFCI outlets before purchasing.
- The indicator light will turn On GREEN once the power is ON. Press the RESET button to restore power to the GFCI outlet. The LED indicator keeps GREEN no matter you press the RESET or TEST button.
- The ETL certification is a sign of a better quality product. This product has gone through many test procedures before getting its approval which makes it the safest GFCI.
- Back and side wired for easy installation. Decorator wall plate and screws included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws.
- 15A/125V/1875W. Wallplate Included, ETL Listed
- 3GRACE GFCI Outlet - The 20 Amp 125 Volt 60 HZ GFCI Duplex Receptacle meets UL 943 class A and UL 498 receptacle standards. Constructed with premium high-impact resistant thermoplastic materials and rational structure design, It ensures Safe electrical with superior strength and durability.
- Tamper Resistant - Tamper Resistant shutters protect children from preventing objects from being inserted into the slots of the outlets, provide a safe option for you and your family.
- Self-Test - Two Indicator Light provides simple, intuitive feedback on power and protection status. If the indicator (LED) glows green, you have installed the GFCI receptacle correctly and it is working properly, The GFCI outlet automatically conducts a Self-Test(the red light will blink once) every 1-10 minutes. When the GFCI receptacle reaches the end of its' life the red indicator will turn on, it reminds you to replace the outlet in time.
- Easy Installation - Back and side wiring, no extra wiring required. The package includes detailed instruction. Ideal for use in indoor occasions such as homes, offices, hospitals, schools.
- Certification and Warranty - UL certified for top quality standards and safe operation, 3GRACE Brand proudly provides warranty on all Outlet Receptacle products to ensure 100% satisfaction.
- 15 amp Non-Tamper Resistant Ground Fault Circuit Interrupter (GFCI) outlet receptacle for indoor use. Please kindly check if the depth of electrical box can fit our GFCI outlets before purchasing.
- The indicator light will turn On GREEN once the power is ON. Press the RESET button to restore power to the GFCI outlet. The LED indicator keeps GREEN no matter you press the RESET or TEST button.
- The ETL certification is a sign of a better quality product. This product has gone through many test procedures before getting its approval which makes it the safest GFCI.
- Back and side wired for easy installation. Decorator wall plate and screws included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws.
- 15A/125V/1875W. Wallplate Included, ETL Listed
- GFCI Outlet - Constructed with premium high-impact resistant thermoplastic materials and rational structure design, ensures superior strength and durability. it a single gang GFCI electrical box that supports a standard duplex, grounded receptacle
- Safe electrical GFCI outlet tester with TEST and RESET buttons and LED Indicator is designed to meet local and national electrical codes.
- Safty - The ANKO GFCI USB Outlet meets UL-Listed YGB-094WR, 20 Amp, 125 Volt, 60HZ. Tamper Resistant Receptacle prevents young children from inserting unwanted objects into the outlets. For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault, provides continuous ground fault protection.
- Weather Resistant - Constructed with advanced UV stabilized engineering to provide superior corrosion, temperature, and UV resistance, preventing discoloration and aging, ideal for outdoor & indoor use. Ground fault circuit interrupter GFCI outlets are required in kitchens and bathrooms and within 25 feet of heating, air conditioning and refrigeration equipment to prevent electrical shock in areas subject to moisture.
- 20 amp Non-Tamper Resistant Ground Fault Circuit Interrupter (GFCI) outlet receptacle for indoor use. Please kindly check if the depth of electrical box can fit our GFCI outlets before purchasing.
- The indicator light will turn On GREEN once the power is ON. Press the RESET button to restore power to the GFCI outlet. The LED indicator keeps GREEN no matter you press the RESET or TEST button.
- The ETL certification is a sign of a better quality product. This product has gone through many test procedures before getting its approval which makes it the safest GFCI.
- Back and side wired for easy installation. Decorator wall plate and screws included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws.
- 20A/125V/2500W. Wallplate Included, ETL Listed
- 3GRACE GFCI Outlet - The 15 Amp 125 Volt 60 HZ GFCI Duplex Receptacle meets UL 943 class A and UL 498 receptacle standards. Constructed with premium high-impact resistant thermoplastic materials and rational structure design, It ensures Safe electrical with superior strength and durability.
- Tamper Resistant Outlets - Tamper Resistant shutters protect children from electrocution by preventing objects from being inserted into the slots of the outlets, provide a safe option for you and your family.
- Self-Test - Two Indicator Light provides simple, intuitive feedback on power and protection status. If the indicator (LED) glows green, you have installed the GFCI receptacle correctly and it is working properly, The GFCI outlet automatically conducts a Self-Test(the red light will blink once) every 1-10 minutes. When the GFCI receptacle reaches the end of its' life the red indicator will turn on, it reminds you to replace the outlet in time.
- Weather Resistant Outdoor Outlet - Constructed with advanced Anti-UV radiation PC Material, it is capable to provent extreme corrosion and temperature. The UV resistance, proventing discoloration and aging, is ideal for outdoor & indoor use.
- Easy Installation - Back and side wiring, no extra wiring required. Unbreakable polycarbonate decorator wall plates, screws and complete installation instructions included.
- 【15 Amp GFCI Outlet】Ground Fault Circuit Interrupter (GFCI) receptacle is designed to recognize a ground fault in your wiring and immediately breaks the flow of electricity, thus protecting you from electrical shock. Please kindly check if the depth of electrical box can fit our GFCI outlets before purchasing.
- 【Self-Test】The red LED light blinks indicating a successfull self-test. If the red LED light stays ON, the test has failed and the GFCI must be immediately replaced.
- 【Tamper Resistant】Tamper resistant receptacle has spring-loaded shutters that close off the socket openings. An important next step to making the home safer for children.
- 【Easy to Install】Easy Installation with back or side wiring. Screwless Wallplate and installation instructions included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws.
- 【Certification 】15A/125V/1875W. ETL Listed. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws.
- For an added layer of protection, the GFCI regularly conducts an automatic internal test to confirm that it can respond to a ground fault
- Provides continuous ground fault protection detects and trips on actual ground fault even when self test is being conducted
- Status indicator light shows power and protection status as well as indication of line/load reversal
- Patented lockout action prevents reset if GFCI is damaged and cannot respond to a ground fault
- Slim, shallow design reduced depth makes it easier to install
- GFCI Standard Outlets - The BRILLTECH 20 Amp 125 Volt 60 HZ GFCI Receptacle meets UL-Listed, Constructed with premium high-impact resistant thermoplastic materials and rational structure design, It ensures Safe electrical with superior strength and durability.
- Tamper Resistant (TR) - Tamper Resistant shutters protect children from electrocution by preventing objects from being inserted into the slots of the outlets, provide a safe option for you and your family.
- Self Test - If the indicator (LED) glows green, you have installed the GFCI receptacle correctly and it is working properly. The GFCI outlet automatically conducts a Self-Test(the red light will blink once) every 40 seconds to ensure the GFCI is continually working. Safe electrical GFCI outlet tester with TEST and RESET buttons.
- Easy Installation - The GFI receptacles are designed to support back and side wiring for 12-14AWG wire. 14AWG wire is recommended for back wiring and 12AWG wire is recommended for side wiring. Dont take the terminal screws out, it will strip the threads.The screws have already loosen up to get the wire loops around the screws. Installation can take as little as less than 10 minutes by following our detailed instructions. Unbreakable polycarbonate decorator wall plate and screws are included.
- 2 Year warranty, UL Listed.
Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Customer Outreach PO Box 8338 product.safety@altec.com Phone 1-877-GO ALTEC Saint Joseph, MO 64508 connect.altec.com/login Facsimile 1-877-659-9929 IMPORTANT SAFETY RECALL This notice applies to your vehicle. Refer to the provided list. NHTSA Recall Number: Altec Identifier: Transport Canada Number: Dear Altec Owner, For US owners, this notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For Canadian owners, this notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in AT200A aerial devices built on cutaway vans from January 2016 to January 2022. These units have a GFCI outlet that could become overloaded during use. Overloading of a GFCI outlet could cause it to fail and produce a fire. Death or serious injury could result from a fire. Refer to the included notice for the items covered under the Altec Warranty Policy. If you had this repair performed before you received this notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. All work will be performed at no charge to the customer when presented for repair. Compare your unit’s identifying information with the provided list to verify your unit is affected. You may also contact Altec or view your fleet through Altec Connect to determine if there are any other outstanding notices. The inspection and repair can be performed by the customer, or you may contact Altec for further assistance. The inspection is expected to take 15 minutes to complete. The repair is expected to take 2 hours to complete. Parts may not be immediately available due to supplier backorder. If you have sold or retired the unit, update the records through Altec Connect. If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice. For US owners: After contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or go to http://www.safercar.gov. For Canadian Owners: If you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec. We regret this inconvenience; however, we are taking this action in the interest of your safety and continued satisfaction with Altec products. Thank you for your immediate attention on this important matter. 22V-469 CSN-3008 August 26, 2022 2022-360 | Revised: September 6, 2022 Page 1 of 2 Customer Service Notice CSNReleased: August 26, 2022 | Revised: September 6, 2022 Altec Use Only Inspection labor 0.75 hr Service, 0.25 hr other Repair labor 2.0 hr Account # 010.0557.45963.000.9241.000 Travel Not included NHTSA code 11 Prime fail P/N N/A Doc ref 074900827 Altec Use Only Description Part No. Qty Warranty Circuit breaker kit for single GFCI outlet 991524604 1 Yes Circuit breaker kit for double GFCI outlet 991524605 1 Yes 3008-A Circuit Breaker Addition Units Affected: AT200A aerial devices built on cutaway vans from January 2016 to January 2022. Verify your unit is affected by reviewing the attached list or accessing Altec Connect. Background: Altec has learned that the affected units have a generator with a maximum current output that exceeds the 20 amp rating of the GFCI outlet(s) connected to it. A GFCI outlet could be overloaded by extended use at a load exceeding 20 amps. This can happen when simultaneously running the air conditioning and using a tool plugged into the outlet. WARNING Death or serious injury could result from a fire. Overloading of a GFCI outlet could cause it to fail and produce a fire. Customer Action: Do not use the GFCI outlet(s) in the enclosed work area until the new circuit breaker(s) is installed. Until then, only use the power strip that is powered by the inverter. This power strip is usually located on the left side of the work bench that is mounted on the curb side wall of the enclosed work area. Inspect the unit as described in the Inspection Procedure beginning on page 2. Order and install the proper Circuit Breaker Kit as based on the inspection, or contact Altec to perform this installation. The kit must be installed no later than the next preventive maintenance interval or 90 days from the receipt of this CSN, whichever comes first. Requirements: Every unit requires the installation of the proper kit for completion. The inspection is estimated to take 15 minutes and one person to complete. The kit installation is estimated to take 2 hours and 1 person to complete. Completion and Warranty: The inspection and repair are covered under the Altec Warranty Policy and can be performed by Altec, the customer, or the customer’s warranty provider. Altec will perform the work for free at an Altec facility. If the customer or the customer’s warranty provider performs the work, a warranty claim must be submitted to be reimbursed for the cost of the parts and/or labor. Altec will allow up to $22.50 for the labor to perform the inspection and up to $180 for the labor to perform the repair. Customers are responsible for the travel costs of an Altec Mobile Service technician if the technician performs the work at the owner’s location. Altec Contact Info: Altec Connect: connect.altec.com/login Phone: 1-877-GO ALTEC (1-877-462-5832) | Options: 1 – Parts; 2 – Shop Service; 3 – Mobile Service; 4 – Technical Support; 5 – Global Rental Service Request; 6 – Chassis Repair Page 2 of 2 CSN-3008-A Inspection Procedure: No tools are required for this inspection. Read and understand all steps of the instructions before beginning the procedure. 1. Position the unit on a level surface, and apply the parking brake. Turn off the engine, and chock the wheels. 2. Enter the enclosed rear work area of the van through one of the roll-up doors. Find the GFCI electrical outlet box located on the street side of the rear wall next to the rear roll-up door. 3. Determine the required Circuit Breaker Kit part number, which depends on whether the outlet box contains one or two GFCI duplex outlets (refer to Figures 1 through 3). • One GFCI duplex outlet—kit part number 991524604 • Two GFCI duplex outlets—kit part number 991524605 4. Order the kit specified in step 3 and install it upon receipt, or contact Altec and schedule to have the kit specified in step 3 installed. 5. Apply masking tape or duct tape over the front of the GFCI outlet box. Write “DO NOT USE PER CSN-3008” on the tape with a permanent marker. 6. Put the unit back into service while awaiting the kit installation. Figure 1 — Single Duplex Outlet Example Figure 2 — Double Duplex Outlet Example 1 Figure 3 — Double Duplex Outlet Example2 Customer Outreach PO Box 8338 product.safety@altec.com Téléphone 1-877-GO ALTEC Saint Joseph, MO 64508 connect.altec.com/login Télécopie 1-877-659-9929 RAPPEL DE SÉCURITÉ IMPORTANT Cet avis s’applique à votre véhicule. Reportez-vous à la liste fournie. Numéro de rappel NHTSA : Identifiant Altec : Numéro de Transports Canada : Cher propriétaire d’Altec, Pour les propriétaires américains, cet avis vous est envoyé conformément aux exigences de la Loi sur la sécurité routière et automobile des États-Unis. Pour les propriétaires canadiens, cet avis vous est envoyé conformément aux exigences de la Loi sur la sécurité automobile du Canada. La présente a pour but de vous informer que votre véhicule peut contenir une défectuosité pouvant nuire à la sécurité d’une personne. Altec Industries, Inc. a décidé qu’un défaut lié à la sécurité des véhicules à moteur existe dans les dispositifs aériens AT200A montés sur des fourgonnettes tronquées de janvier 2016 à janvier 2022. Ces unités possèdent des sorties protégées par DDFT qui pourraient être en surcharge pendant leur utilisation. Toute surcharge d’une sortie protégée par DDFT pourrait entraîner sa défaillance et un incendie. Un incendie peut entraîner la mort ou des blessures graves. Reportez-vous à l’avis inclus pour les articles couverts par la politique de garantie Altec. Si vous avez fait faire cette réparation avant de recevoir cet avis, vous pourriez être admissible à recevoir un remboursement pour le coût de l’obtention d’une solution précédant la notification du problème associé à ce rappel. Tous les travaux seront effectués sans frais pour le client lorsqu’ils seront présentés pour réparation. Comparez les informations d’identification de votre unité avec la liste fournie pour vérifier que votre unité est concernée. Vous pouvez également contacter Altec ou consulter votre flotte via Altec Connect pour déterminer s’il existe d’autres avis en suspens. L’inspection et la réparation peuvent être réalisées par le client ou vous pouvez contacter Altec pour obtenir de l’aide. L’inspection devrait prendre 15 minutes. La réparation devrait prendre 2 heures. Les pièces peuvent ne pas être immédiatement disponibles en raison d’une rupture de stock fournisseur. Si vous avez vendu ou mis l’unité hors service, mettez à jour les enregistrements via Altec Connect. Si vous avez loué cet équipement à une autre personne ou entreprise, vous êtes tenu par la loi fédérale d’envoyer une copie de cet avis au locataire par courrier de première classe dans les dix (10) jours suivant la réception de cet avis. Pour les propriétaires américains : Après avoir contacté Altec, si vous n’êtes toujours pas en mesure de faire remédier à la condition de sécurité sans frais et dans un délai raisonnable, vous pouvez déposer une plainte auprès de : Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 ou appelez sans frais le 1-888-327-4236 (TTY : 1-800-424-9153) ou rendez-vous sur http://www.safercar.gov. Pour les propriétaires canadiens : Si vous ne parvenez toujours pas à faire remédier à la condition de sécurité par votre revendeur dans un délai raisonnable, veuillez contacter Altec. Nous regrettons cet inconvénient; cependant, nous prenons cette mesure dans l’intérêt de votre sécurité et de votre satisfaction continue avec les produits Altec. Merci de votre attention immédiate à cette question importante. 22V-469 CSN-3008 26 août 2022 2022-360 | Modifié : 6 septembre 2022 Page 1 sur 2 Avis du service client CSNDate de publication : 26 août 2022 | Modifié : 6 septembre 2022 À l’usage exclusif d’Altec Main d’oeuvre de l’inspection 0,75 h (entretien), 0,25 h (autre) Main-d’oeuvre de réparation 2,0 h N ° de compte : 010.0557.45963.000.9241.000 Déplacement Non inclus Code NHTSA 11 P/N d’échec d’amorçage S.O. Réf doc 074900827 À l’usage exclusif d’Altec Description N ° de pièce Qté Garantie Kit de coupe-circuits pour prise simple protégée par DDFT 991524604 1 Oui Kit de coupe-circuits pour prise double protégée par DDFT 991524605 1 Oui 3008-A Ajout de coupe-circuits Unités concernées : Dispositifs aériens AT200A montés sur des fourgonnettes tronquées de janvier 2016 à janvier 2022. Vérifiez que votre unité est concernée en consultant la liste ci-jointe ou en accédant à Altec Connect. Contexte : Altec a appris que les unités concernées sont équipées d’un générateur dont le courant de sortie maximal dépasse la limite de 20 ampères de la ou des sorties protégées par DDFT qui y sont connectées. Une sortie protégée par DDFT pourrait être surchargée durant une utilisation prolongée avec une charge dépassant 20 ampères ce qui peut survenir en cas d’utilisation simultanée de la climatisation et d’un outil branché dans la prise. AVERTISSEMENT Un incendie peut entraîner la mort ou des blessures graves. Toute surcharge d’une sortie protégée par DDFT pourrait entraîner sa défaillance et un incendie. Action requise de la part du client : N’utilisez pas la ou les sorties protégées par DDFT dans la cabine de travail avant que le ou les coupe-circuits ne soient installés. Jusqu’à ce que ce soit fait, utilisez seulement la barre multiprise alimentée par l’onduleur. Cette barre se trouve généralement sur le côté gauche de l’établi fixé sur la paroi latérale du côté trottoir de la cabine de travail. Inspectez l’unité de la manière indiquée au début de la marche à suivre de l’inspection en page 2. Commandez et installez le kit de coupe-circuits correct en fonction du résultat de l’inspection ou contactez Altec qui se chargera de cette installation. Le kit doit être installé au plus tard lors du prochain intervalle de maintenance préventive ou dans les 90 jours suivant la réception de ce CSN, selon la première éventualité. Exigences : Il est nécessaire d’installer le kit correct sur chaque unité pour compléter la démarche. L’inspection devrait prendre 15 minutes et 1 personne. L’installation du kit devrait prendre 2 heures et 1 personne. Achèvement et garantie : L’inspection et la réparation sont couvertes par la politique de garantie d’Altec et peuvent être effectuées par Altec, le client ou le fournisseur de garantie du client. Altec effectuera le travail gratuitement dans une installation Altec. Si le client ou le fournisseur de garantie du client effectue le travail, une demande de garantie doit être soumise afin d’être remboursé pour le coût des pièces et/ou de la main-d’oeuvre. Altec accordera jusqu’à 22,50 USD pour la main-d’oeuvre liée à l’inspection et jusqu’à 180 USD pour la main-d’oeuvre liée à la réparation. Les clients sont responsables des frais de déplacement d’un technicien du service mobile Altec si le technicien effectue le travail à l’emplacement du propriétaire. Coordonnées d’Altec : Altec Connect : connect.altec.com/login Téléphone : 1-877-GOA LTEC (1-877-462-5832) | Options : 1 – Pièces; 2 – Service en atelier; 3 – Service mobile; 4 – Assistance technique; 5 – Demande de service de location mondiale; 6 – Réparation du châssis Page 2 sur 2 CSN-3008-A Marche à suivre de l’inspection : Aucun outil n’est requis pour cette inspection. Lisez et comprenez toutes les étapes des instructions avant de commencer la marche à suivre. 1. Placez l’unité sur une surface de niveau et serrez le frein de stationnement. Coupez le moteur et calez les roues. 2. Entrez dans la cabine de travail de la fourgonnette par l’une des portes-rideaux. Repérez le boîtier de la sortie protégée par DDFT situé du côté trottoir de la paroi arrière à côté de la porte-rideau arrière. 3. Déterminez le numéro de pièce du kit de coupe-circuits nécessaire, en fonction de si le boîtier de la sortie contient une ou deux prises doubles (consultez les Figures 1 à 3). • Une prise double protégée par DDFT — numéro de pièce du kit 991524604 • Deux prises doubles protégées par DDFT — numéro de pièce du kit 991524605 4. Commandez le kit indiqué à l’étape 3 et installez-le dès réception ou contactez Altec et planifiez l’installation par Altec de ce kit. 5. Apposez du ruban masque ou adhésif pour conduits sur l’avant du boîtier de prise protégée par DDFT. Écrivez « DO NOT USE PER CSN-3008 » (NE PAS UTILISER CONFORMÉMENT À CSN-3008) à l’aide d’un marqueur permanent. 6. Remettez l’unité en service en attendant l’installation du kit. Figure 1 — Exemple de prise double unique Figure 2 — Exemple 1 de deux prises doubles Figure 3 — Exemple 2 de deux prises doubles
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-469 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Altec Industries, Inc. Submission Date : JUN 30, 2022 NHTSA Recall No. : 22V-469 Manufacturer Recall No. : CSN 3008 Manufacturer Information : Manufacturer Name : Altec Industries, Inc. Address : 210 Inverness Center Drive Birmingham AL 35242 Company phone : 205 991 7733 Population : Number of potentially involved : 430 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2016-2022 Altec Van mounted AT200A and AT30G Vehicle Type : Body Style : Power Train : NR Descriptive Information : All van mount units with the generator installed are included in the recall population. The recall population was determined from a review of production records. Production Dates : JAN 01, 2016 – JAN 31, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The 120-volt generator has a 30-amp circuit to provide power to a GFCI receptacle. The GFCI receptacle is rated for 20-amp with no circuit protection installed in the outlet circuit. Electrical components could be connected to the receptacle that could draw up to 30-amp through the outlet causing overload and potential failure. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Electrical overload of the circuit can result in a thermal event, increasing the risk of personal injury and/or property damage. Description of the Cause : NR Identification of Any Warning that can Occur : The GFCI outlet could have visible heat damage before a thermal event and could be identified during a preoperation inspection. No other warning exists. Involved Components : Part 573 Safety Recall Report 22V-469 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : GFCI receptacle Component Description : GFCI receptacle Component Part Number : 05950009 Supplier Identification : Component Manufacturer Name : Altec Inc. Address : 2106 S Riverside Rd Saint Joseph Missouri 64507-2535 Country : United States Chronology : On February 2, 2022, a customer notified Altec that a service technician had identified that the generator circuit on an AT200A unit was rated at 30-amps with a connected 20-amp GFCI receptacle. The GFCI receptacle circuit does not have a circuit breaker installed to open the circuit when an overload of the circuit is detected. After being notified, Altec reviewed production records. On May 3, 2022, a potential field action was opened to further evaluate customer work practice, the risk to workers, and determine what Models were affected and the field population of those units. On June 24, 2022, Altec determined that a potential defect was present in a certain field population and determined that a field campaign was required. There have been no warranty claims or other field reports identified. There have been no accidents, injuries, or deaths related to this issue. Description of Remedy : Description of Remedy Program : A new outlet will be installed with a circuit-breaker and new wiring. The recall remedy will be completed free of charge when presented for repair. The Altec Warranty Policy covers the recall remedy including cases requiring reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. How Remedy Component Differs from Recalled Component : The installed remedy circuit breaker will open at the set amperage rating to prevent overload of the wiring or outlet. Identify How/When Recall Condition was Corrected in Production : 20-amp circuit breakers are installed in the outlet circuit. Recall Schedule : Part 573 Safety Recall Report 22V-469 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Recall Schedule : Altec will issue CSN-3008 to the owners of the affected units. Altec does not have a dealer network and issues letters to owners only. Planned Dealer Notification Date : AUG 29, 2022 – AUG 29, 2022 Planned Owner Notification Date : AUG 29, 2022 – AUG 29, 2022 * NR – Not Reported
SEOCONTENT-END